Why is Recycling of Postconsumer Plastics so Challenging?
The DOI matches its Crossref record; 228 of the 228 references it cites were found in a registry or an index.
Abstract
The ubiquitous use of plastics has been driven by their combination of low cost and properties, but these attributes directly challenge waste management schemes for plastic recycling. Some postconsumer recycling programs are now nearly 50 years old, but a significant fraction of plastics still finds landfills or other dumping strategies at their end of life. With the growing concern regarding plastic waste, especially ocean plastics, there is a need for innovation and alternative strategies for the economic translation of plastic waste to valued product(s) that will promote their efficient circular utilization. This review first describes the technical and economic hurdles associated with the recycling of postconsumer plastics, but then it focuses on providing an overview of emergent strategies to recover plastic waste through new polymer design, new recycling processes, and chemical transformations to value-added products. Specific challenges discussed include plastic waste sorting and separations, product variability including additives, and the high efficiency/low cost in which the existing petrochemical industry can produce virgin polymers, in particular polyolefins. Although a wide variety of technical strategies have been demonstrated for recycling of plastics through both mechanical and chemical means, the commercial success of these different strategies is generally limited by either performance, including large variance in key metrics, or economics where the products can match the performance of virgin materials but the recycling process is expensive. Successful capture of postconsumer plastic waste through recycling likely will depend on economic incentives and government regulations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Mechanical recycling of plastics is largely unsuccessful for preserving their value or as a waste remediation strategy-only around 9% of all plastics have been recycled”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [5]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Borrelle, S. B., Ringma, J., Law, K. L., Monnahan, C. C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G. H., Hilleary, M. A., et al. (2020) · Science · doi:10.1126/science.aba3656 · Cited by 3,219
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
The global threat from plastic pollution
MacLeod, M., Arp, H. P. H., Tekman, M. B., & Jahnke, A. (2021) · Science · doi:10.1126/science.abg5433 · Cited by 2,951
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
Research works printed but not linked: 9
- Fullerton D., 1996, Am. Econ. Rev., 86, 971
- 10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y · doi:10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y
- 2021, PCT 10-Q filing for PureCycle
- OnColor IR Sortable Black Infraread Sortable Black for Recyclable Packaging ; https://www.avient.com/sites/default/files/2020-08/detectable-blacks-product-bulletin.pdf (accessed April 10, 2021).
- 10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d · doi:10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d
- 2019, BP’s New Technology to Enable Circularity for Unrecyclable PET Plastic Waste
- 2021, Eastman and Governor Lee Announce World-Scale Plastic-to-Plastic Molecular Recycling Facility to be Built in Kingsport
- 2020, Carbios Produces First Clear Plastic Bottles from Enzymatically Recycled Textile Waste
- 10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l · doi:10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l
Cited by
Items 201–300 of 402
Blume, N., Turek, T., & Minke, C. (2024) · Batteries · doi:10.3390/batteries10070240 · Cited by 8
“The same assumptions apply to the gasket if it is an FKM.”
BackgroundAutomated Ultra-Fast 13C NMR Analysis of Polyolefin Materials
Giampaolo, F., Cipullo, R., Cuomo, S., Piccialli, F., & Busico, V. (2025) · Analytical Chemistry · doi:10.1021/acs.analchem.4c06290 · Cited by 8
Supercritical Fluids for Enhanced Chemical Transformation of Postconsumer Plastics: A Review
Gurrala, L., & Morais, A. R. C. (2025) · ChemCatChem · doi:10.1002/cctc.202401725 · Cited by 7
Perceptions and alignment on quality along the circular plastics packaging material chain
Molenbuur, M., van Eijk, M. C. P., Urbanus, J. H., Diepenmaat, H. B., & Ragaert, K. (2025) · Waste Management · doi:10.1016/j.wasman.2025.114758 · Cited by 8
Selective upcycling of commodity PVC/PET plastic mixture via mechanochemical reaction
Kwon, G., Cha, S., Kim, S., Jeon, H., & Kim, B. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.167056 · Cited by 6
Recycled and Virgin Plastics Prices Dynamics: Towards Substitution Effects?
Peragin, L. (2025) · Environmental Modeling & Assessment · doi:10.1007/s10666-025-10089-z · Cited by 6
“Literature on plastics recycling is scarce in economics, but this topic has recently drawn increasing attention from economists, especially post-consumer waste [23].”
Contaminant-Tolerant Conversion of Polyethylene Waste to α-Olefins
Posada, C., Sun, H., DiMarco, A., Munyaneza, N. E., Valenzuela, O., Wall, C. E., & Liu, G. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c10550 · Cited by 6
“4,5 Mechanical recycling can potentially divert PE waste from landfills, incineration, or release into the environment, 6 but the approach requires extensive sorting and cleaning.”
Govinda, Chinglenthoiba, C., Jagota, V., & Katiyar, J. K. (2026) · Journal of Natural Fibers · doi:10.1080/15440478.2026.2619016 · Cited by 6
Shiraki, Y., Yamada, N. L., Ito, K., & Yokoyama, H. (2024) · Polymer · doi:10.1016/j.polymer.2024.127073 · Cited by 8
A hypothetical approach toward laser-induced high-density polyethylene pyrolysis: a review
Nabi, R. A. U., Khawaja, H. A., Liu, Y., Yang, C., Long, J., Li, X., & Wang, T. J. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e01074 · Cited by 6
Archer, W. R., Nie, C., Maguire, S. M., Sundar, S. V., Priestley, R. D., Davidson, E., Chirik, P. J., & Register, R. A. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00292 · Cited by 6
Plastics Recycling: A Comparative Study of Different Analytical Techniques
Amin, M. L., Dinh, L. N. M., Rawal, A., Zetterlund, P. B., & Agarwal, V. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500195 · Cited by 6
“Given that only around 13% of global plastic waste is recycled,thereisagrowingdemandfornewrecyclingstrategiesto mitigate this ever-growing challenge of plastic waste [1, 11–14].”
Controllable carbonyl-assisted C(sp 3 )–C(sp 3 ) bond reduction and reorganization
Wang, S., Wang, Y., Hu, K., Wang, K., & Zhou, X. (2023) · Organic Chemistry Frontiers · doi:10.1039/d2qo01981g · Cited by 6
Revolutionizing Waste Management With Advancements in Sorting and Processing Technologies
Rathoure, A. K. (2024) · Practice, progress, and proficiency in sustainability · doi:10.4018/979-8-3693-4054-7.ch015 · Cited by 7
Ogbu, I. M., Fastow, E. J., Winey, K. I., & Kozlowski, M. C. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02074 · Cited by 6
Gerbehaye, C., Bernaerts, K. V., Mincheva, R., & Raquez, J. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111010 · Cited by 6
“Traditional mechanical, or chemical re(up)cycling provide possibilities but rise significant environmental concerns [2].”
BackgroundSustainable Packaging Systems Using Renewable Materials
Rabnawaz, M. (2024) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.4c00453 · Cited by 6
Liguori, F., Oberhauser, W., Berretti, E., Poggini, L., Barbaro, P., & Moreno‐Marrodán, C. (2024) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202400349 · Cited by 5
Yang, J., Xu, Y., & Chu, X. (2025) · Measurement · doi:10.1016/j.measurement.2025.118657 · Cited by 6
Antonelli, L., Felli, N., Cesaris, M. G. D., Cinti, S., & Gentili, A. (2025) · Talanta · doi:10.1016/j.talanta.2025.129263 · Cited by 5
Catalytic upcycling of waste polystyrene plastics into production of fuels and chemicals: A review
Pu, Y., Hu, X., & Du, H. (2026) · Waste Management · doi:10.1016/j.wasman.2026.115344 · Cited by 5
Advanced techniques and mechanistic insights for high efficiency recovery of polymers recycling
Srivastav, R. S., & More, A. P. (2026) · Journal of Environmental Management · doi:10.1016/j.jenvman.2026.128788 · Cited by 5
Chen, Y., Wang, W., Chen, J., & Zou, C. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02954 · Cited by 5
Scalable Upcycling of Mixed Plastics into High-Performance Covalent Adaptable Networks
Huang, R., Wang, L., Wang, B., Yang, S., Du, S., Dai, S., Zhang, F., & Ma, S. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00344 · Cited by 5
Solvent-mediated contaminant removal from plastic waste using thermodynamic modeling
Zhou, P., Ikegwu, U. M., Radkevich, E., Ra, E., Liburd, H., Huber, G. W., Zavala, V. M., & Lehn, R. C. V. (2026) · Green Chemistry · doi:10.1039/d5gc06059a · Cited by 6
Biodegradable material based on starch-g-polyvinyl acetate copolymer with bactericidal properties
Monina, A. P., Apryatina, K. V., Zaitsev, S. D., Smirnova, O. N., Yunin, P. A., & Смирнова, Л. А. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05205-0 · Cited by 5
Co-upcycling of mixed polypropylene and polyesters
Wei, X., Zhang, Q., Shen, C., Ye, P., Xu, J., Liu, X., Su, Z., Xu, S., & Wang, Y. (2025) · Green Chemistry · doi:10.1039/d5gc00561b · Cited by 5
AI-Aided Crystallization Elution Fractionation (CEF) Assessment of Polyolefin Resins
Brighel, L., Scuotto, G. M. L., Antinucci, G., Cipullo, R., & Busico, V. (2025) · Polymers · doi:10.3390/polym17121597 · Cited by 5
“Unfortunately, these amount to about 50% by weight of the polymer market [11–13], and are very difficult to re-use in mixtures because thermodynamic incompatibility results in phase separation issues [14].”
Wang, T., Kanda, H., Kusumi, K., Mei, L., Zhang, L., Machida, H., Norinaga, K., Yamamoto, T., Sekikawa, H., Yasui, K., et al. (2024) · Waste Management · doi:10.1016/j.wasman.2024.04.050 · Cited by 5
Virtual Issue on Waste to Wealth: Innovations in the Upcycling of Plastics
Vogt, B. D. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02683 · Cited by 5
Self-citationKardgar, A. K., Carmona, E., Karlsson, T., Brosché, S., & Almroth, B. C. (2025) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2025.138946 · Cited by 4
Zheng, P., Wang, X., & Jiang, W. (2026) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00568 · Cited by 4
Hosseiny, F. Z., & Shi, R. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6c00693 · Cited by 4
Valdez, S., Dunn, C. B., Hullum, M. D., Harper, E., & Qiang, Z. (2024) · Journal of Chemical Education · doi:10.1021/acs.jchemed.3c01258 · Cited by 4
Lee, T., Lee, S., Lee, D., & Kwon, E. E. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106810 · Cited by 4
Incorporation of Thioacetate Pendants on a Polyalkenamer Enables High Extensibility
Chethalen, R. J., Kim, M., Ruiz, J. C., Tu, C., Gray, J., Winey, K. I., Lesser, A. J., Crosby, A. J., & Coughlin, E. B. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02110 · Cited by 4
Belyamani, I., Gripon, L., Lafranche, É., & Cauret, L. (2025) · Advanced Sustainable Systems · doi:10.1002/adsu.202500002 · Cited by 4
Ranjan, R., Mone, V. P., Rai, R., Kant, C., & Dhar, P. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c09105 · Cited by 5
Cutting back on low-value health care practices supports sustainable kidney care
McAlister, S., Luyckx, V. A., & Viecelli, A. K. (2024) · Kidney International · doi:10.1016/j.kint.2023.12.022 · Cited by 4
Han, Y., Zhang, P., Zhou, H., Zhao, T., Odelius, K., & Hakkarainen, M. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202421431 · Cited by 5
Cost-effective environmental sustainability : a focus on a circular economy
Thomas, D. S. (2023) · doi:10.6028/nist.ams.100-48-upd1 · Cited by 5
Circular Upcycling of Bottlebrush Thermosets
Zhang, D., Vashahi, F., Dashtimoghadam, E., Hu, X., Wang, C. J., Garcia, J., Bystrova, A. V., Vatankhah‐Varnosfaderani, M., Leibfarth, F. A., & Sheiko, S. S. (2022) · Angewandte Chemie · doi:10.1002/ange.202217941 · Cited by 3
Closed‐Loop Recycling of Mixed Plastics of Polyester and CO2‐Based Polycarbonate to a Single Monomer
Shi, C., Diment, W. T., & Chen, E. Y. ‐. (2024) · Angewandte Chemie · doi:10.1002/ange.202405083 · Cited by 4
Designing Plastics Recycling with Virtual Reality
Etto, J., Hurtig, K., Kirjavainen, E., & Häkkilä, J. (2024) · International Conference on Mobile and Ubiquitous Multimedia (MUM) · doi:10.1145/3701571.3703374 · Cited by 3
“While many of these strategies depend on technical and chemical innovations, effective sorting and separation of plastic waste at the consumer level remains a persistent challenge [17].”
InfluentialMatuch, C., Chen, W., Ternes, M. E., & Seay, J. R. (2025) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.14601 · Cited by 3
“12 This ongoing debate about the classification of advanced recycling highlights the need to objectively examine the role of these technologies in material recovery from post-use plastic.”
Renewable Carbon for Plastics: Quo Vadis?
Zehm, D., Lieske, A., & Ganster, J. (2024) · Springer handbooks · doi:10.1007/978-3-031-66209-6_9 · Cited by 3
Moghadam, H. E., & Karami, A. (2025) · Energy Strategy Reviews · doi:10.1016/j.esr.2025.101793 · Cited by 3
Yadav, H., Okoffo, E. D., Caro, D., Galli, A., & Iskander, S. M. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00185 · Cited by 3
Yost, S. F., Alterio, B. M., Stokes, M. D., Gupta, A., & Vogt, B. D. (2025) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.5c00405 · Cited by 3
Self-citationMotolani, F., Jones, M. D., Nagy, G., Chandler, B. D., Long, B. K., & Vogt, B. D. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c03416 · Cited by 3
Self-citationNgu, J., Selvam, E., Luo, S., Liu, D., & Vlachos, D. G. (2025) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2025.126083 · Cited by 8
Mukta, S., Updegraff, K. M., Early, M. R., Curtzwiler, G. W., & Vorst, K. (2025) · Meat Science · doi:10.1016/j.meatsci.2025.109993 · Cited by 3
Wang, H., Xu, L., Si, C., Zhang, Y., Qi, Y., Zhang, Q., & Jiang, W. (2025) · Small · doi:10.1002/smll.202513604 · Cited by 3
Wu, G., Luo, N., Jin, T., Wang, H., Li, Y., & Ye, L. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500422 · Cited by 3
“This immiscibility results in poor mechanical integrity and severely restricts the reuse of mixed plastic wastes in high-value applications [ 8, 9 ].”
Hydrocracking Polyolefins to Jet Fuel over a NiW/WO x Catalyst
Wang, X., Lei, Z., Yan, J., Wang, P., Chong, R., Tian, F., Hu, T., Cao, R., & Wang, X. (2026) · ACS Catalysis · doi:10.1021/acscatal.5c07128 · Cited by 3
Up, down and back again: Value judgements in polymer recycling
Seitzinger, C. L., Lahive, C. W., & Shaver, M. P. (2026) · Cambridge Prisms Plastics · doi:10.1017/plc.2026.10041 · Cited by 3
Qi, L., Ding, Y., Xie, H., Yan, J., Bai, C., Tian, F., Fan, Q., Chong, R., Hu, T., Ma, H. T., et al. (2026) · ACS Catalysis · doi:10.1021/acscatal.6c02094 · Cited by 3
Dickert, A., Wolff, P., Kretschmer, W., & Kempe, R. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250151 · Cited by 3
Jeya, G., Sunitha, T. G., Sivasankar, V., & Sivamurugan, V. (2022) · Sustainable textiles · doi:10.1007/978-981-19-0530-8_6 · Cited by 3
Cook, E., Velis, C. A., & Cottom, J. W. (2021) · Engineering Archive (engrXiv) · doi:10.31224/osf.io/tvxem · Cited by 4
Ren, M., Xiao, S., Yu, B., Wu, W., Liu, B., & Wu, L. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c00104 · Cited by 3
Lost in a Spiral Economy: How the Circular Narrative Risks Losing Its Objective
Abbasi, G. (2025) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.5c00843 · Cited by 2
Multiphase morphology control as a robust route to recycling mixed plastic waste
Gancheva, T., Moraille, P., & Favis, B. D. (2025) · Polymer · doi:10.1016/j.polymer.2025.129184 · Cited by 2
Cao, J., Gong, X., Li, S., Wang, Y., Feng, X., Gao, J. T., & Shi, S. (2025) · ChemCatChem · doi:10.1002/cctc.202501358 · Cited by 2
Advanced Processes for Efficient E-Waste Recycling and Material Recovery
Bhatt, L., Nautiyal, M. K., Singh, S., Chugh, P., Bhatt, B., Ardeep, & Gupta, M. K. (2025) · Springer eBooks · doi:10.1007/978-981-95-0329-2_15 · Cited by 2
Plastics and persistent chemical contaminants in food waste: challenges for the circular economy
Kolobaric, A., Alagappan, S., Hoffman, L. C., Cozzolino, D., & Chapman, J. (2025) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2025.100996 · Cited by 4
Ogawa, H., Shibasaki, K., Kawai, T., Tobita, N., Kubo, H., Yano, P., Kan, D., Niihara, K., Imai, A., Takenaka, M., et al. (2026) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00526 · Cited by 2
Yu, Y., Liu, D., Zhu, M., Yu, J., Wang, X., & Yuan, R. (2026) · Polymer · doi:10.1016/j.polymer.2026.129659 · Cited by 2
Orhorhoro, E. K., Erameh, A. A., & Emifoniye, E. U. (2026) · Advanced engineering forum · doi:10.4028/p-3minkg · Cited by 2
“However, due to unfavorable operational, legislative, political, technical, and economic constraints, these initiatives have not produced a significant positive impact [29].”
Direct Polymer-on-Polymer Grafting of Polyolefins under Visible Light
Kim, H., Wang, H. S., Yun, N., Anastasaki, A., & Choi, T. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.5c21265 · Cited by 3
Xuan, C., Shao, D., Zhang, Y., Li, M., Sheng, W., & Zhou, F. (2026) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2026.112108 · Cited by 2
Tang, K. H. D. (2026) · Sustainability · doi:10.3390/su18115366 · Cited by 2
Recycling of Flexible Plastic Films: Emergent Technologies
Licht, J. S., Tsianou, M., & Alexandridis, P. (2026) · Polymers · doi:10.3390/polym18162031 · Cited by 2
“Depolymerization can be considered a fully chemical recycling process, as it focuses on the conversion of a polymer back to its monomers [191].”
Huang, P., Chen, J., Su, Y., Luo, H., Lee, P., Lan, X., Wang, L., Shen, B., Zhao, Y., Wu, F., et al. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01709 · Cited by 2
Discrete Spectral Sensing System for Separation of Polyolefin Waste Plastics
Pimenov, A., Nesteruk, S., Mikhailova, N., Stepanov, A., Sliusar, N. N., Николаевич, К. В., Baldycheva, A. V., & Somov, A. (2023) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa54631.2023.10275628 · Cited by 2
“Current industrial technologies for optical sorting of plastics are based on Near Infrared (NIR), X-ray Fluorescence (XRF), and VIS (color analysis by camera or spectro-colorimeter) [6] [9] [10].”
BackgroundWeerdt, L. D. (2024) · Ecological Economics · doi:10.1016/j.ecolecon.2024.108222 · Cited by 2
Rodrigues, P. M. S. M., & da Silva, J. C. G. E. (2024) · Detritus · doi:10.31025/2611-4135/2024.19442 · Cited by 2
Use of Hybrid Flame Retardants in Chemically Foamed rPET Blends
Szabó, V. A., Jakab, S. K., Kovács, A., Böcz, T. Z., & Dogossy, G. (2025) · Crystals · doi:10.3390/cryst15010080 · Cited by 2
“Simultaneously, recycling rates have shown only moderate growth over the past decade, emphasizing the need for a more efficient recycling processes [5].”
Motolani, F., Snellings, R. J., Aghamohammadi, S., Oh, H. J., Noh, G. A., Chandler, B. D., & Vogt, B. D. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04137 · Cited by 2
Self-citationAdvances and Challenges in Low‐Temperature Upcycling of Waste Polyolefins via Tandem Catalysis
Zhang, W., Kim, S., Sarazen, M. L., He, M., Chen, J. G., & Lercher, J. A. (2025) · Angewandte Chemie · doi:10.1002/ange.202500559 · Cited by 2
Remove chlorinated waste from refuse derived fuel with rapid recognition technology
Jin, Z., Li, J., & Xu, Z. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108333 · Cited by 2
Ökobilanzen von Kunststoffkreisläufen
Orth, P., Bruder, J., & Rink, M. (2022) · Springer eBooks · doi:10.1007/978-3-658-37814-1_11 · Cited by 2
Competing Time Scales in Surface-Driven Solution Depolymerization
McTigue, W. C. B., & Sing, C. E. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c01528 · Cited by 2
Printability of recycled feedstock for extrusion additive manufacturing
Strano, M., Farioli, D., Landro, L. D., & Mussi, V. (2023) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2023.2295651 · Cited by 2
“Secondary recycling is more challenging than primary recycling [25], because post-consumer waste may come with large variability, with uncertain composition and possible environmental degradation of polymer chains, e.g. because of exposure to ultra-violet solar radiation [26].”
Regulatory and Safety Requirement for use of recycled Polyethylene in Food and Cosmetic Packaging
Labib, R., Amin, R., & Hoffman, L. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.1003192 · Cited by 2
Muzata, T. S., Alford, A., Matuana, L. M., Narayan, R., Drzal, L. T., Bliss, K., & Rabnawaz, M. (2024) · Wiley eBooks · doi:10.1002/9781394214297.ch24 · Cited by 1
Truscello, A. M., Sartiano, C., Galimberti, M. S., Gambarotti, C., Gazzotti, S., & Ortenzi, M. A. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56564 · Cited by 1
Han, Y., Zhang, P., Zhou, H., Zhao, T., Odelius, K., & Hakkarainen, M. (2025) · Angewandte Chemie · doi:10.1002/ange.202421431 · Cited by 1
Nghia, T. H., Dang, B. H., Thinh, D. Q., Nga, P. T. H., Tien, N. V., Thành, N. C., Anh, D. T. V., & Anh, P. Q. (2025) · Advanced Materials & Sustainable Manufacturing · doi:10.70322/amsm.2025.10003 · Cited by 1
Mechanistic kinetic Monte Carlo modeling of the synthesis of hyperbranched polyesters
Coile, M. W., Vangala, S. P. K., Shi, C., Chen, E. Y. ‐., Broadbelt, L. J., & Shaw, A. (2025) · Chem Catalysis · doi:10.1016/j.checat.2025.101296 · Cited by 1
Selected Problems of Reverse Logistics in the Multiple Processing of Polymer Recyclates
Jachowicz, T., Waldemar, W., Sąsiadek, M., Niedziela, M., Jajczyk, J., & Naumowicz, M. (2025) · Transportation research procedia · doi:10.1016/j.trpro.2025.04.107 · Cited by 1
Kim, E. H., & Lee, H. (2025) · MRS Communications · doi:10.1557/s43579-025-00790-1 · Cited by 1
Lee, J., Lee, S., Ko, J., Lee, Y., & Kim, T. (2025) · MRS Communications · doi:10.1557/s43579-025-00801-1 · Cited by 1
Polymer Blend Spiking Method for Quantifying Polypropylene Variants in 100% Polypropylene Blends
Hashemnejad, S. M., & Doshi, A. (2025) · Polymers · doi:10.3390/polym17182543 · Cited by 1
“…with virgin polymer, thorough analytical analysis is required to assess the polymer composition and the presence of polymeric/non-polymeric contaminants, considering that proper separation, washing, and filtration have been applied throughout PCR polymer fabrication [10,11,15,16,19,20].”
Harnessing Colloidal Dispersion for Laccase‐Driven Enzymatic Depolymerization of Polystyrene
Pujol, M., Gonsales, S. A., Seksek, F., Berrin, J., Bissaro, B., & Taton, D. (2025) · Angewandte Chemie · doi:10.1002/ange.202513937 · Cited by 1
Reversing Fatigue Damage in Carbon Fiber–Thermoplastic Composites Using Localized Plasma Heating
Wang, H., Merry, B. L., Nguyen, A., Biswal, A. K., Kumar, V., & Vashisth, A. (2025) · Polymer Composites · doi:10.1002/pc.70735 · Cited by 1
Kamara, I., Martin, J., Shan, C. L. P., & Karim, A. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70301 · Cited by 1
“Despite its utility, these plastics present challenges in postconsumer recycling due to the degradation of properties [4, 5].”
From Compliance to Circularity: A Design‐Led Approach to Recyclable Packaging
Bronsky, T., Nikou, S., & Jager, P. (2025) · Business Strategy and the Environment · doi:10.1002/bse.70494 · Cited by 3
Yost, S. F., Guirguis, P. M., Pereira, P., Savage, P. E., & Vogt, B. D. (2026) · Macromolecular Rapid Communications · doi:10.1002/marc.202500776 · Cited by 1
Self-citationSteven, V., Hossein, G., Schiraldi, D. A., & Joao, M. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70416 · Cited by 1
Metadata
- Authors
- Vogt, B. D., Stokes, K. K., & Kumar, S. K.
- Affiliations
- Pennsylvania State University (US)
- Geisys Ventures, LLC, Lunenburg, Massachusetts 01462, United States
- Columbia University (US)
- Corresponding author
- Vogt, Bryan D.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-23
- Volume
- 3
- Issue
- 9
- Pages
- 4325-4346
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3193988466
- Cited by
- 385
- References
- 225
- Citations by year
- 2026: 84 · 2025: 105 · 2024: 87 · 2023: 66 · 2022: 38 · 2021: 5
- FWCI
- 17.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Polymer Materials (publishedVersion)
- Funders
- Pennsylvania State University
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- plastic recycling, plastic waste management, plastic sorting, polymer additives, polyolefins, mechanical recycling, chemical recycling, value-added products, circular economy, ocean plastic, recycling economics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.