The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Anion Vacancies Regulating Endows MoSSe with Fast and Stable Potassium Ion Storage
Abstract
Vacancy engineering is a promising approach for optimizing the energy storage performance of transition metal dichalcogenides (TMDs) due to the unique properties of vacancies in manipulating the electronic structure and active sites. Nevertheless, achieving effective introduction of anion vacancies with adjustable vacancy concentration on a large scale is still a big challenge. Herein, MoS 2(1– x ) Se 2 x alloys with anion vacancies introduced in situ have been achieved by a simple alloying reaction, and the vacancy concentration has been optimized through adjusting the chemical composition. Experimental and density functional theory calculation results suggest that the anion vacancies in MoS 2(1– x ) Se 2 x alloys could enhance the electronic conductivity, induce more active sites, and alleviate structural variation in the alloys during the potassium storage process. When applied as potassium ion battery anodes, the most optimized vacancy-rich MoSSe alloy delivered high reversible capacities of 517.4 and 362.4 mAh g –1 at 100 and 1000 mA g –1, respectively. Moreover, a reversible capacity of 220.5 mAh g –1 could be maintained at 2000 mA g –1 after 1000 cycles. This work demonstrates a practical approach to modifying the electronic and defect properties of TMDs, providing an effective strategy for constructing advanced electrode materials for battery systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xie, J., Zhang, H., Li, S., Wang, R., Sun, X., Zhou, M., Zhou, J., Lou, X. W. (., & Xie, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302685 · Cited by 3,079
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
Atomic mechanism of the semiconducting-to-metallic phase transition in single-layered MoS2
Lin, Y.-C., Dumcenco, D. O., Huang, Y.-S., & Suenaga, K. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.64 · Cited by 1,428
Defects Engineered Monolayer MoS2 for Improved Hydrogen Evolution Reaction
Ye, G., Gong, Y., Lin, J., Li, B., He, Y., Pantelides, S. T., Zhou, W., Vajtai, R., & Ajayan, P. M. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04331 · Cited by 1,195
Vacancy-Induced Ferromagnetism of MoS2 Nanosheets
Cai, L., He, J., Liu, Q., Yao, T., Chen, L., Yan, W., Hu, F., Jiang, Y., Zhao, Y., Hu, T., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5120908 · Cited by 834
Phosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode
Zhang, W., Mao, J., Li, S., Chen, Z., & Guo, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12185 · Cited by 831
Self-citationLian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
Self-citationLiu, Q., Li, X., He, Q., Khalil, A., Liu, D., Xiang, T., Wu, X., & Song, L. (2015) · Small · doi:10.1002/smll.201501822 · Cited by 650
Graphitic Carbon Nanocage as a Stable and High Power Anode for Potassium‐Ion Batteries
Cao, B., Zhang, Q., Liu, H., Xu, B., Zhang, S., Zhou, T., Mao, J., Pang, W. K., Guo, Z., Li, A., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801149 · Cited by 561
Self-citationUnderstanding High-Energy-Density Sn4P3 Anodes for Potassium-Ion Batteries
Zhang, W., Pang, W. K., Sencadas, V., & Guo, Z. (2018) · Joule · doi:10.1016/j.joule.2018.04.022 · Cited by 555
Self-citationNiu, F., Yang, J., Wang, N., Zhang, D., Fan, W., Yang, J., & Qian, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700522 · Cited by 543
Ultrathin MoS2(1–x)Se2 x Alloy Nanoflakes For Electrocatalytic Hydrogen Evolution Reaction
Gong, Q., Cheng, L., Liu, C., Zhang, M., Feng, Q., Ye, H., Zeng, M., Xie, L., Liu, Z., & Li, Y. (2015) · ACS Catalysis · doi:10.1021/cs501970w · Cited by 535
Jin, H., Li, L., Liu, X., Tang, C., Xu, W., Chen, S., Song, L., Zheng, Y., & Qiao, S. (2019) · Advanced Materials · doi:10.1002/adma.201902709 · Cited by 531
Carbon-Coated MoSe2/MXene Hybrid Nanosheets for Superior Potassium Storage
Huang, H., Cui, J., Liu, G., Bi, R., & Zhang, L. (2019) · ACS Nano · doi:10.1021/acsnano.8b09548 · Cited by 479
MoSe2/N‐Doped Carbon as Anodes for Potassium‐Ion Batteries
Ge, J., Fan, L., Wang, J., Zhang, Q., Liu, Z., Zhang, E., Liu, Q., Yu, X., & Lu, B. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801477 · Cited by 468
Zhai, T., Xie, S., Yu, M., Fang, P., Liang, C., Lu, X., & Tong, Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.06.013 · Cited by 442
Sun, D., Ye, D., Liu, P., Tang, Y., Guo, J., Wang, L., & Wang, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702383 · Cited by 422
Self-citationRational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries
Zhang, Y., Mu, Z., Yang, C., Xu, Z., Zhang, S., Zhang, X., Li, Y., Lai, J., Sun, Z., Yang, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707578 · Cited by 417
He, H., Huang, D., Tang, Y., Wang, Q., Ji, X., Wang, H., & Guo, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.009 · Cited by 401
Self-citationPistachio‐Shuck‐Like MoSe2/C Core/Shell Nanostructures for High‐Performance Potassium‐Ion Storage
Wang, W., Jiang, B., Qian, C., Lv, F., Feng, J., Zhou, J., Wang, K., Yang, C., Yang, Y., & Guo, S. (2018) · Advanced Materials · doi:10.1002/adma.201801812 · Cited by 368
MoS2 as a long-life host material for potassium ion intercalation
Ren, X., Zhao, Q., McCulloch, W. D., & Wu, Y. (2017) · Nano Research · doi:10.1007/s12274-016-1419-9 · Cited by 316
Bamboo‐Like Hollow Tubes with MoS2/N‐Doped‐C Interfaces Boost Potassium‐Ion Storage
Jia, B., Yu, Q., Zhao, Y., Qin, M., Wang, W., Liu, Z., Lao, C., Liu, Y., Wu, H., Zhang, Z., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803409 · Cited by 308
Enhancing sodium-ion battery performance with interlayer-expanded MoS2–PEO nanocomposites
Li, Y., Liang, Y., Robles Hernandez, F. C., Deog Yoo, H., An, Q., & Yao, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.05.012 · Cited by 295
Defect Engineering Strategies for Nitrogen Reduction Reactions under Ambient Conditions
Yan, D., Li, H., Chen, C., Zou, Y., & Wang, S. (2019) · Small Methods · doi:10.1002/smtd.201800331 · Cited by 284
Vacancy Engineering for Tuning Electron and Phonon Structures of Two‐Dimensional Materials
Liu, Y., Xiao, C., Li, Z., & Xie, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600436 · Cited by 275
Zhang, Y., Ding, Z., Foster, C. W., Banks, C. E., Qiu, X., & Ji, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700856 · Cited by 265
Superior Potassium Ion Storage via Vertical MoS2 “Nano‐Rose” with Expanded Interlayers on Graphene
Xie, K., Yuan, K., Li, X., Lu, W., Shen, C., Liang, C., Vajtai, R., Ajayan, P., & Wei, B. (2017) · Small · doi:10.1002/smll.201701471 · Cited by 264
Feng, Q., Mao, N., Wu, J., Xu, H., Wang, C., Zhang, J., & Xie, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b02506 · Cited by 254
In Situ Alloying Strategy for Exceptional Potassium Ion Batteries
Wang, J., Fan, L., Liu, Z., Chen, S., Zhang, Q., Wang, L., Yang, H., Yu, X., & Lu, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b00634 · Cited by 236
Kiran, V., Mukherjee, D., Jenjeti, R. N., & Sampath, S. (2014) · Nanoscale · doi:10.1039/c4nr03716b · Cited by 233
He, H., Huang, D., Pang, W., Sun, D., Wang, Q., Tang, Y., Ji, X., Guo, Z., & Wang, H. (2018) · Advanced Materials · doi:10.1002/adma.201801013 · Cited by 211
Self-citationSandwich‐like MoS2@SnO2@C with High Capacity and Stability for Sodium/Potassium Ion Batteries
Chen, Z., Yin, D., & Zhang, M. (2018) · Small · doi:10.1002/smll.201703818 · Cited by 205
K2Ti4O9: A Promising Anode Material for Potassium Ion Batteries
Kishore, B., G, V., & Munichandraiah, N. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0421613jes · Cited by 178
Controlled argon beam-induced desulfurization of monolayer molybdenum disulfide
Ma, Q., Odenthal, P., Mann, J., Le, D., Wang, C. S., Zhu, Y., Chen, T., Sun, D., Yamaguchi, K., Tran, T., et al. (2013) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/25/25/252201 · Cited by 133
Vacancy-induced sodium-ion storage in N-doped carbon Nanofiber@MoS2 nanosheet arrays
Liang, J., Wei, Z., Wang, C., & Ma, J. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.230 · Cited by 131
Zhang, S., Zheng, Y., Huang, X., Hong, J. H., Cao, B., Hao, J., Fan, Q., Zhou, T., & Guo, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900081 · Cited by 122
Self-citationLiu, Q., Shang, Q., Khalil, A., Fang, Q., Chen, S., He, Q., Xiang, T., Liu, D., Zhang, Q., Luo, Y., et al. (2016) · ChemCatChem · doi:10.1002/cctc.201600504 · Cited by 111
Yang, J., Zhu, J., Xu, J., Zhang, C., & Liu, T. X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15854 · Cited by 110
Zheng, N., Jiang, G., Chen, X., Mao, J., Zhou, Y., & Li, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00423h · Cited by 109
Chen, X., Wang, Z., Qiu, Y., Zhang, J., Liu, G., Zheng, W., Feng, W., Cao, W., Hu, P., & Hu, W. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07904k · Cited by 89
Jia, B., Zhao, Y., Qin, M., Wang, W. A., Liu, Z., Lao, C., Yu, Q., Liu, Y., Wu, H., Zhang, Z., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03166e · Cited by 84
Evolution of Metastable Defects and Its Effect on the Electronic Properties of MoS2 Films
Precner, M., Polakovic, T., Qiao, Q., Trainer, D. J., Putilov, A. V., Giorgio, C. D., Cone, I., Zhu, Y., Xi, X., Iavarone, M., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-24913-y · Cited by 66
Cited by
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Metadata
- Authors
- He, H., Huang, D., Gan, Q., Hao, J., Liu, S., Wu, Z., Pang, W. K., Johannessen, B., Tang, Y., Luo, J.-L., Wang, H., & Guo, Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-23
- Volume
- 13
- Issue
- 10
- Pages
- 11843-11852
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2975372627
- Cited by
- 299
- References
- 42
- FWCI
- 13.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.