The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Structural Changes and Thermal Stability of Charged LiNixMnyCozO2 Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy
Open accessAbstract
Thermal stability of charged LiNixMnyCozO2 (NMC, with x + y + z = 1, x:y:z = 4:3:3 (NMC433), 5:3:2 (NMC532), 6:2:2 (NMC622), and 8:1:1 (NMC811)) cathode materials is systematically studied using combined in situ time-resolved X-ray diffraction and mass spectroscopy (TR-XRD/MS) techniques upon heating up to 600 °C. The TR-XRD/MS results indicate that the content of Ni, Co, and Mn significantly affects both the structural changes and the oxygen release features during heating: the more Ni and less Co and Mn, the lower the onset temperature of the phase transition (i.e., thermal decomposition) and the larger amount of oxygen release. Interestingly, the NMC532 seems to be the optimized composition to maintain a reasonably good thermal stability, comparable to the low-nickel-content materials (e.g., NMC333 and NMC433), while having a high capacity close to the high-nickel-content materials (e.g., NMC811 and NMC622). The origin of the thermal decomposition of NMC cathode materials was elucidated by the changes in the oxidation states of each transition metal (TM) cations (i.e., Ni, Co, and Mn) and their site preferences during thermal decomposition. It is revealed that Mn ions mainly occupy the 3a octahedral sites of a layered structure (R3̅m) but Co ions prefer to migrate to the 8a tetrahedral sites of a spinel structure (Fd3̅m) during the thermal decomposition. Such element-dependent cation migration plays a very important role in the thermal stability of NMC cathode materials. The reasonably good thermal stability and high capacity characteristics of the NMC532 composition is originated from the well-balanced ratio of nickel content to manganese and cobalt contents. This systematic study provides insight into the rational design of NMC-based cathode materials with a desired balance between thermal stability and high energy density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
EXPGUI, a graphical user interface for GSAS
Toby, B. H. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801002242 · Cited by 9,247
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
The Current Move of Lithium Ion Batteries Towards the Next Phase
Kim, T., Park, J., Chang, S. K., Choi, S., Ryu, J. H., & Song, H. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200028 · Cited by 742
Thermal stability of LixCoO2, LixNiO2 and λ-MnO2 and consequences for the safety of Li-ion cells
Dahn, J. R., FULLER, E., Obrovac, M. N., & VONSACKEN, U. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90415-4 · Cited by 718
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Self-citationA Combined Computational/Experimental Study on LiNi1/3Co1/3Mn1/3O2
Hwang, B. J., Tsai, Y. W., Carlier, D., & Ceder, G. (2003) · Chemistry of Materials · doi:10.1021/cm030299v · Cited by 500
Cited by
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review
Duan, J., Tang, X., Dai, H., Yang, Y., Wu, W., Wei, X., & Huang, Y. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00060-4 · Cited by 893
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit
Liu, X., Ren, D., Hsu, H., Feng, X., Xu, G.-L., Zhuang, M., Gao, H., Lu, L., Han, X., Chu, Z., et al. (2018) · Joule · doi:10.1016/j.joule.2018.06.015 · Cited by 869
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review
Liu, C., Lin, J., Cao, H., Zhang, Y., & Sun, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.304 · Cited by 789
Compositionally complex doping for zero-strain zero-cobalt layered cathodes
Zhang, R., Wang, C., Zou, P., Lin, R., Ma, L., Yin, L., Li, T., Xu, W., Jia, H., Li, Q., et al. (2022) · Nature · doi:10.1038/s41586-022-05115-z · Cited by 785
Problems and their origins of Ni-rich layered oxide cathode materials
Zhang, S. S. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.08.013 · Cited by 746
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Liu, D., Shadike, Z., Lin, R., Qian, K., Li, H., Li, K., Wang, S., Yu, Q., Liu, M., Ganapathy, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201806620 · Cited by 673
Self-citationYang, H., Wu, H., Ge, M., Li, L., Yuan, Y., Yao, Q., Chen, J., Xia, L., Zheng, J., Chen, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808825 · Cited by 630
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries
Manthiram, A., Song, B., & Li, W. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.007 · Cited by 628
Recent advances of thermal safety of lithium ion battery for energy storage
Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.042 · Cited by 624
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
A review of Ni-based layered oxides for rechargeable Li-ion batteries
Xu, J., Lin, F., Doeff, M. M., & Tong, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07991a · Cited by 517
Park, K., Jung, H., Kuo, L., Kaghazchi, P., Yoon, C. S., & Sun, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801202 · Cited by 502
A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries
Ren, D., Hsu, H., Li, R., Feng, X., Guo, D., Han, X., Lu, L., He, X., Gao, S., Hou, J., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100034 · Cited by 489
Ren, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Yu, H., Cao, Y., Chen, L., Hu, Y., Duan, X., Dai, S., Li, C., & Jiang, H. (2021) · Nature Communications · doi:10.1038/s41467-021-24893-0 · Cited by 408
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Choi, J. U., Voronina, N., Sun, Y., & Myung, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002027 · Cited by 394
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Mao, J., Ye, C., Zhang, S., Xie, F., Zeng, R., Davey, K., Guo, Z., & Qiao, S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00162d · Cited by 365
Holoubek, J., Yu, M., Yu, S., Li, M., Wu, Z., Xia, D., Bhaladhare, P., Gonzalez, M. S., Pascal, T. A., Liu, P., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00643 · Cited by 351
Yang, J., & Xia, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09938 · Cited by 334
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 322
Xu, G., Liu, X., Daali, A., Amine, R., Chen, Z., & Amine, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004748 · Cited by 313
Kim, Y., Seong, W. M., & Manthiram, A. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.020 · Cited by 299
Kim, U., Ryu, H., Kim, J., Mücke, R., Kaghazchi, P., Yoon, C. S., & Sun, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803902 · Cited by 298
Schöberl, J., Ank, M., Schreiber, M., Wassiliadis, N., & Lienkamp, M. (2024) · eTransportation · doi:10.1016/j.etran.2023.100305 · Cited by 165
Kim, T., Ono, L. K., & Qi, Y. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta07565b · Cited by 119
Metadata
- Authors
- Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-05
- Volume
- 6
- Issue
- 24
- Pages
- 22594-22601
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1971672415
- Cited by
- 1,010
- References
- 21
- FWCI
- 10.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.