Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 663

The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.

Fate and Risks of Nanomaterials in Aquatic and Terrestrial Environments

Batley, Graeme E., Kirby, Jason K., McLaughlin, Michael J.·2013·Accounts of Chemical Research

Abstract

Over the last decade, nanoparticles have been used more frequently in industrial applications and in consumer and medical products, and these applications of nanoparticles will likely continue to increase. Concerns about the environmental fate and effects of these materials have stimulated studies to predict environmental concentrations in air, water, and soils and to determine threshold concentrations for their ecotoxicological effects on aquatic or terrestrial biota. Nanoparticles can be added to soils directly in fertilizers orplant protection products or indirectly through application to land or wastewater treatment products such as sludges or biosolids. Nanoparticles may enter aquatic systems directly through industrial discharges or from disposal of wastewater treatment effluents or indirectly through surface runoff from soils. Researchers have used laboratory experiments to begin to understand the effects of nanoparticles on waters and soils, and this Account reviews that research and the translation of those results to natural conditions. In the environment, nanoparticles can undergo a number of potential transformations that depend on the properties both of the nanoparticle and of the receiving medium. These transformations largely involve chemical and physical processes, but they can involve biodegradation of surface coatings used to stabilize many nanomaterial formulations. The toxicity of nanomaterials to algae involves adsorption to cell surfaces and disruption to membrane transport. Higher organisms can directly ingest nanoparticles, and within the food web, both aquatic and terrestrial organisms can accumulate nanoparticles. The dissolution of nanoparticles may release potentially toxic components into the environment. Aggregation with other nanoparticles (homoaggregation) or with natural mineral and organic colloids (heteroaggregation) will dramatically change their fate and potential toxicity in the environment. Soluble natural organic matter may interact with nanoparticles to change surface charge and mobility and affect the interactions of those nanoparticles with biota. Ultimately, aquatic nanomaterials accumulate in bottom sediments, facilitated in natural systems by heteroaggregation. Homoaggregates of nanoparticles sediment more slowly. Nanomaterials from urban, medical, and industrial sources may undergo significant transformations during wastewater treatment processes. For example, sulfidation of silver nanoparticles in wastewater treatment systems converts most of the nanoparticles to silver sulfides (Ag₂S). Aggregation of the nanomaterials with other mineral and organic components of the wastewater often results in most of the nanomaterial being associated with other solids rather than remaining as dispersed nanosized suspensions. Risk assessments for nanomaterial releases to the environment are still in their infancy, and reliable measurements of nanomaterials at environmental concentrations remain challenging. Predicted environmental concentrations based on current usage are low but are expected to increase as use increases. At this early stage, comparisons of estimated exposure data with known toxicity data indicate that the predicted environmental concentrations are orders of magnitude below those known to have environmental effects on biota. As more toxicity data are generated under environmentally-relevant conditions, risk assessments for nanomaterials will improve to produce accurate assessments that assure environmental safety.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ar2003368

Cites

45 of 45 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 663

Metadata

Authors
Batley, G. E., Kirby, J. K., & McLaughlin, M. J.
Venue
Accounts of Chemical Research
Published
2012-07-03
Volume
46
Issue
3
Pages
854-862
ISSN
  • 0001-4842 (ISSN-L)
  • 1520-4898
OpenAlex
W1967436592
Cited by
663
References
45
FWCI
16.65
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.