The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Poly(ε-caprolactone) Polyurethane and Its Shape-Memory Property
Abstract
A series of segmented poly(epsilon-caprolactone) polyurethanes (PCLUs) were prepared from poly(epsilon-caprolactone) (PCL) diol, 2,4-toluene diisocyanate and ethylene glycol. The molecular weight (M(n)) of PCL was 500-10,000, and the soft-to-hard molar ratio was 1:2 to 1:6. Their shape-memory behaviors were investigated as a function of PCL molecular weight, PCLU composition, and thermal/mechanical history. When a deformation temperature 15-20 degrees C below T(m) was chosen, the lowest recovery temperature (LRT) was 15-18 degrees C below T(m), and the recovery ratio was 94-100% for tensile deformation of 300% and for compression of 2.7-fold. The reasons for this deformation-recovery procedure and the mechanism for this shape recovery below T(m) were discussed. The shape recovery was associated with the premelting of the crystals formed during the deformation and fixation, and, thus, it could be accomplished in the solid state. Its driving force was the inner stress stored in the deformed specimen during deformation and crystallization. Therefore, the LRT was a more practical temperature for shape-memory PCLU than T(m). It could be conveniently measured by means of thermal mechanical analysis. By adjusting the molecular weight of the PCL diol and the hard-to-soft ratio, the LRT of PCLU could be adjusted to the range of 37-42 degrees C, and reasonable rigidity could be retained after shape recovery, fulfilling the essential requirements of medical implantations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Designing materials for biology and medicine
Langer, R., & Tirrell, D. A. (2004) · Nature · doi:10.1038/nature02388 · Cited by 3,198
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750
Polyurethanes having shape memory effects
Kim, B. K., Lee, S. Y., & Xu, M. (1996) · Polymer · doi:10.1016/s0032-3861(96)00442-9 · Cited by 693
Shape-memory materials and hybrid composites for smart systems: Part I Shape-memory materials
Wei, Z. G., Sandstroröm, R., & Miyazaki, S. (1998) · Journal of Materials Science · doi:10.1023/a:1004692329247 · Cited by 574
Synthesis and Application of Modulated Polymer Gels
Hu, Z., Zhang, X., & Li, Y. (1995) · Science · doi:10.1126/science.269.5223.525 · Cited by 544
Kowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma000125o · Cited by 482
Osada, Y., & Matsuda, A. (1995) · Nature · doi:10.1038/376219a0 · Cited by 478
Shape Memory Materials for Biomedical Applications
El Feninat, F., Laroche, G., Fiset, M., & Mantovani, D. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(200203)4:3<91::aid-adem91>3.0.co;2-b · Cited by 458
Cited by
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
Recent advances in shape memory polymers and composites: a review
Ratna, D., & Karger-Kocsis, J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2176-7 · Cited by 942
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819
Smart polymeric gels: Redefining the limits of biomedical devices
Chaterji, S., Kwon, I. K., & Park, K. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.018 · Cited by 615
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Biomedical applications of thermally activated shape memory polymers
Small, IV, Singhal, P., Wilson, T. S., & Maitland, D. J. (2010) · Journal of Materials Chemistry · doi:10.1039/b923717h · Cited by 450
Yilgor, I., Yilgor, E., Guler, I. G., Ward, T. C., & Wilkes, G. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.027 · Cited by 350
Shape-memory polymers for multiple applications in the materials world
Pilate, F., Toncheva, A., Dubois, P., & Raquez, J.-M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.004 · Cited by 332
Cao, X., Habibi, Y., & Lucia, L. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b910517d · Cited by 312
Huang, W. M., Zhao, Y., Wang, C. C., Ding, Z., Purnawali, H., Tang, C., & Zhang, J. L. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-9952-z · Cited by 299
A review of actively moving polymers in textile applications
Hu, J., & Chen, S. (2010) · Journal of Materials Chemistry · doi:10.1039/b922872a · Cited by 262
Evaluation of nanoparticulate fillers for development of shape memory polyurethane nanocomposites
Gunes, I. S., Cao, F., & Jana, S. C. (2008) · Polymer · doi:10.1016/j.polymer.2008.03.021 · Cited by 255
Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins
Xie, T., Page, K. A., & Eastman, S. A. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002579 · Cited by 170
Two-way shape memory effect in polymer laminates
Chen, S., Hu, J., Zhuo, H., & Zhu, Y. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.05.073 · Cited by 158
Temperature‐Memory Polymer Networks with Crystallizable Controlling Units
Kratz, K., Madbouly, S. A., Wagermaier, W., & Lendlein, A. (2011) · Advanced Materials · doi:10.1002/adma.201102225 · Cited by 150
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
Li, G., Ajisafe, O., & Meng, H. (2013) · Polymer · doi:10.1016/j.polymer.2012.12.046 · Cited by 126
Biodegradable Shape-Memory Polymers Exhibiting Sharp Thermal Transitions and Controlled Drug Release
Nagahama, K., Ueda, Y., Ouchi, T., & Ohya, Y. (2009) · Biomacromolecules · doi:10.1021/bm9002078 · Cited by 124
Nan, W., Wang, W., Gao, H., & Liu, W. (2013) · Soft Matter · doi:10.1039/c2sm26918j · Cited by 121
Self-citationA viscoplastic theory of shape memory polymer fibres with application to self-healing materials
Li, G., & Shojaei, A. (2012) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2011.0628 · Cited by 117
Lendlein, A., Zotzmann, J., Feng, Y., Alteheld, A., & Kelch, S. (2009) · Biomacromolecules · doi:10.1021/bm900038e · Cited by 115
Rational design of biodegradable thermoplastic polyurethanes for tissue repair
Xu, C., & Hong, Y. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.029 · Cited by 109
Design of Triple-Shape Memory Polyurethane with Photo-cross-linking of Cinnamon Groups
Wang, L., Yang, X., Chen, H., Gong, T., Li, W., Yang, G., & Zhou, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402091m · Cited by 108
Saralegi, A., Gonzalez, M. L., Valea, A., Eceiza, A., & Corcuera, M. A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.12.001 · Cited by 97
Cai, Y., Jiang, J., Zheng, B., & Xie, M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.36849 · Cited by 81
Shojaei, A., Li, G., & Voyiadjis, G. Z. (2013) · Journal of Applied Mechanics · doi:10.1115/1.4007140 · Cited by 67
Novel synthetic strategy toward shape memory polyurethanes with a well-defined switching temperature
D'hollander, S., Van Assche, G., Van Mele, B., & Du Prez, F. (2009) · Polymer · doi:10.1016/j.polymer.2009.07.021 · Cited by 66
Wang, H., Yu, J., Fang, H., Wei, H., Wang, X., & Ding, Y. (2018) · Polymer · doi:10.1016/j.polymer.2017.12.067 · Cited by 56
Functional fatigue of shape memory polymers
Schmidt, C., Neuking, K., & Eggeler, G. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800213 · Cited by 55
Fan, L. F., Rong, M. Z., Zhang, M. Q., & Chen, X. D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700124 · Cited by 47
Self-citationNagata, M., & Kitazima, I. (2006) · Colloid and Polymer Science · doi:10.1007/s00396-005-1393-3 · Cited by 47
Designing temperature-memory effects in semicrystalline polyurethane
Mirtschin, N., & Pretsch, T. (2015) · RSC Advances · doi:10.1039/c5ra05492c · Cited by 39
Peponi, L., Arrieta, M. P., Mujica-Garcia, A., & López, D. (2017) · Modification of Polymer Properties · doi:10.1016/b978-0-323-44353-1.00006-3 · Cited by 30
Metadata
- Authors
- Ping, P., Wang, W., Chen, X., & Jing, X.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-14
- Volume
- 6
- Issue
- 2
- Pages
- 587-592
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1966760934
- Cited by
- 354
- References
- 27
- FWCI
- 13.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.