Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Toward exploiting the attractive mechanical properties of cellulose I nanoelements, a novel route is demonstrated, which combines enzymatic hydrolysis and mechanical shearing. Previously, an aggressive acid hydrolysis and sonication of cellulose I containing fibers was shown to lead to a network of weakly hydrogen-bonded rodlike cellulose elements typically with a low aspect ratio. On the other hand, high mechanical shearing resulted in longer and entangled nanoscale cellulose elements leading to stronger networks and gels. Nevertheless, a widespread use of the latter concept has been hindered because of lack of feasible methods of preparation, suggesting a combination of mild hydrolysis and shearing to disintegrate cellulose I containing fibers into high aspect ratio cellulose I nanoscale elements. In this work, mild enzymatic hydrolysis has been introduced and combined with mechanical shearing and a high-pressure homogenization, leading to a controlled fibrillation down to nanoscale and a network of long and highly entangled cellulose I elements. The resulting strong aqueous gels exhibit more than 5 orders of magnitude tunable storage modulus G' upon changing the concentration. Cryotransmission electron microscopy, atomic force microscopy, and cross-polarization/magic-angle spinning (CP/MAS) 13C NMR suggest that the cellulose I structural elements obtained are dominated by two fractions, one with lateral dimension of 5-6 nm and one with lateral dimensions of about 10-20 nm. The thicker diameter regions may act as the junction zones for the networks. The resulting material will herein be referred to as MFC (microfibrillated cellulose). Dynamical rheology showed that the aqueous suspensions behaved as gels in the whole investigated concentration range 0.125-5.9% w/w, G' ranging from 1.5 Pa to 105 Pa. The maximum G' was high, about 2 orders of magnitude larger than typically observed for the corresponding nonentangled low aspect ratio cellulose I gels, and G' scales with concentration with the power of approximately three. The described preparation method of MFC allows control over the final properties that opens novel applications in materials science, for example, as reinforcement in composites and as templates for surface modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to the more aggressive acid hydrolysis treatment, the enzymatic treatment yielded longer and highly entangled nanoscale fibrils.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Finally, the enzymatic step leads to reduced energy consumption allowing widespread use of the material”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“They demonstrated that the enzymatic hydrolysis step avoids blocking problems during the homogenization treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Xylanases are hydrolytic enzymes that modify the random amorphous compounds (hemicelluloses) present in the plant fiber.”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
In the citing paper
“They can also initiate the random hydrolysis of the b-1,4 non-reducing terminal regions located between the glycosidic linkages of the glucose units (Hubbe, Rojas, Lucia, & Sain, 2008;Pääkko et al., 2007).”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Numerical Recipes: The Art of Scientific Computing
Ziegel, E. (1987) · Technometrics · doi:10.1080/00401706.1987.10488304 · Cited by 6,702
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Native cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Dynamics of concentrated polymer systems. Part 3.—The constitutive equation
Doi, M., & Edwards, S. F. (1978) · J. Chem. Soc., Faraday Trans. 2 · doi:10.1039/f29787401818 · Cited by 615
Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy
Wickholm, K., Larsson, P. T., & Iversen, T. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(98)00236-5 · Cited by 423
Self-citationA CP/MAS13C NMR investigation of molecular ordering in celluloses
Larsson, P. T., Wickholm, K., & Iversen, T. (1997) · Carbohydrate Research · doi:10.1016/s0008-6215(97)00130-4 · Cited by 399
Self-citationChemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Research works printed but not linked: 28
- Hult E. L., 2001, Polymer, 42, 3314
- Hult E. L., 2002, Holzforschung, 56, 184
- Liu H., 2002, Part B: Polym. Phys
- Kim C.-W., 2006, Polymer, 47, 5107
- Fleming K., 2001, ChemEur. J., 7, 1835
- Lima M. M. D., 2004, Macromol. Rapid Commun., 25, 787
- Araki J., 1998, Physicochem. Eng. Aspects
- Turbak A. F., 1983, Appl. Polym. Symp.
- Herrick F. W., 1983, Appl. Polym. Symp.
- Nakagaito A. N., 2004, Process
- Berglund L. A., 2005, Natural Fibers, Biopolymers, and Biocomposites
- Nakagaito A. N., 2005, Process
- Nakagaito A. N., 2005, Process
- Henriksson M., 2007, Eur. Polym. J.
- Ono H., 2004, Polym. J., 36, 694
- Tatsumi D., 2002, J. Soc. Rheol., Jpn., 30, 32
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 61
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 73
- Lowys M.-P., 2001, Food Hydrocolloids, 15, 32
- Ono H., 1998, Cellulose, 5, 247
- Ono H., 2001, Trans. Mater. Res. Soc. Jpn., 26, 572
- Engström A.-C., 2006, Biomacromolecules, 7, 2031
- Hausalo T., 1999, Pulp and Paper Testing, 63
- Hiltunen E., 1999, Pulp and Paper Testing, 135
- Katz K., 1984, Sven. Papperstid., 87, R48
- Guenet J.-M., 2000, J. Rheol., 44, 960
- Sahimi M., 1998, Phys. Rep., 306, 395
- Soft Matter Physics, 1999, Springer-Verlag: Berlin
Cited by
Items 901–1,000 of 1,002
Sirviö, J. A., & Lakovaara, M. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00466 · Cited by 36
Structure and rheological studies of phosphorylated cellulose nanofibrils suspensions
Patoary, M. K., Farooq, A., Yinan, F., Chaudary, A., Islam, S. R., Zhao, Y., Ge, A., Wang, F., & Liu, L. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.114581 · Cited by 38
Campo, R., Carretti, E., Lubello, C., & Lotti, T. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.116247 · Cited by 37
Preparation of carboxylic acid-bearing polysaccharide nanofiber made from euglenoid β-1,3-glucans
Shibakami, M., Tsubouchi, G., Nakamura, M. M., & Hayashi, M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.026 · Cited by 37
Viscoelasticity and water plasticization of polymer-cellulose composite films and paper sheets
Myllytie, P., Salmén, L., Haimi, E., & Laine, J. (2009) · Cellulose · doi:10.1007/s10570-009-9376-z · Cited by 41
Self-citationWater sorption in microfibrillated cellulose (MFC): The effect of temperature and pretreatment
Meriçer, Ç., Minelli, M., Baschetti, M. G., & Lindström, T. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.023 · Cited by 39
Self-citationBioinspired lubricating films of cellulose nanofibrils and hyaluronic acid
Valle‐Delgado, J. J., Johansson, L., & Österberg, M. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.11.047 · Cited by 41
Self-citationFlocculation and retention of fillers with nanocelluloses
Korhonen, M., & Laine, J. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p119-128 · Cited by 43
“Cellulose nanofibrils (CNF) or cellulose microfibrils (CMF) can be produced by mechanically disintegrating chemical pulps (Pääkkö et al. 2007), in which they preserve their chemical composition and high aspect ratio of cellulose fibrils.”
BackgroundSelf-citationOriented Cellulose Nanopaper (OCNP) based on bagasse cellulose nanofibrils
Petroudy, S. R. D., Garmaroody, E. R., & Rudi, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.11.074 · Cited by 37
Efficiency of Cellulose Carbonates to Produce Cellulose Nanofibers
Khiari, R., Rol, F., Brochier-Salon, M.-C., Bras, J., & Belgacem, M. N. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06039 · Cited by 38
Qin, C., Yao, M., Liu, Y., Yang, Y., Zong, Y., & Zhao, H. (2020) · Materials · doi:10.3390/ma13235568 · Cited by 38
“In the actual extraction process, pretreatment methods [41,42] (acid, alkali, enzyme and oxidation, etc.”
MethodWu, M., Liao, K., Liu, C., Yu, G., Rahmaninia, M., Li, H., & Li, B. (2021) · Cellulose · doi:10.1007/s10570-021-04157-2 · Cited by 36
Ultrasound in cellulose-based hydrogel for biomedical use: From extraction to preparation
Liu, Y., Li, S., Wang, Z., & Wang, L. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112368 · Cited by 39
Arola, S., Kou, Z., Rooijakkers, B. J. M., Velagapudi, R., Sammalkorpi, M., & Linder, M. B. (2022) · Cellulose · doi:10.1007/s10570-022-04664-w · Cited by 40
Rapid and Complete Enzyme Hydrolysis of Lignocellulosic Nanofibrils
Martín‐Sampedro, R., Filpponen, I., Hoeger, I. C., Zhu, J. Y., Laine, J., & Rojas, O. J. (2012) · ACS Macro Letters · doi:10.1021/mz300484b · Cited by 36
Self-citationKuijk, A., Koppert, R. J., Versluis, P., van Dalen, G., Remijn, C., Hazekamp, J., Nijsse, J., & Velikov, K. P. (2013) · Langmuir · doi:10.1021/la403397d · Cited by 36
Chen, Y., He, Y., Fan, D., Han, Y., Li, G., & Wang, S. (2017) · Journal of Nanomaterials · doi:10.1155/2017/1591504 · Cited by 40
Nanocelluloses From Sugarcane Biomass
Pereira, B., & Arantes, V. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-804534-3.00009-4 · Cited by 42
Ikkala, O. T., Ras, R. H. A., Houbenov, N., Ruokolainen, J., Pääkkö, M., Laine, J., Leskelä, M. A., Berglund, L. A., Lindström, T., ten Brinke, G., et al. (2009) · Faraday Discussions · doi:10.1039/b905204f · Cited by 42
Self-citationNanotechnology - Methods of Manufacturing Cellulose Nanofibres
Szczęsna‐Antczak, M., Kazimierczak, J., & Antczak, T. (2012) · Fibres and Textiles in Eastern Europe · Cited by 54
Tian, X., Lü, P., Song, X., Nie, S., Liu, Y., Liu, M., & Wang, Z. (2017) · Cellulose · doi:10.1007/s10570-017-1382-y · Cited by 35
Bondancia, T. J., Corrêa, L. J., Cruz, A. J. G., Junior, A. C. B., Mattoso, L. H. C., Marconcini, J. M., & Farinas, C. S. (2018) · Cellulose · doi:10.1007/s10570-018-1876-2 · Cited by 36
“Enzymeassisted processes have also been employed to obtain CNF, in combination with a mechanical disintegration or other process step (Campos et al. 2013; Henriksson et al. 2007; Paakko et al. 2007; Zhu et al. 2011).”
MethodRamakrishnan, A., Ravishankar, K., & Dhamodharan, R. (2019) · Cellulose · doi:10.1007/s10570-019-02312-4 · Cited by 35
“Some chemical pretreatments such as mild acid hydrolysis, enzymatic reactions, TEMPO mediated oxidation have been applied to the cellulosic pulp (Pääkko et al. 2007; Saito et al. 2007).”
MethodSimple centrifugal fractionation to reduce the size distribution of cellulose nanofibers
Zhai, L., Kim, H. C., Kim, J. W., & Kim, J. (2020) · Scientific Reports · doi:10.1038/s41598-020-68642-7 · Cited by 36
Novel aspects of nanocellulose
Hettrich, K., Pinnow, M., Volkert, B., Passauer, L. P., & Fischer, S. (2014) · Cellulose · doi:10.1007/s10570-014-0265-8 · Cited by 35
“In general, nanotechnology deals with structures sized between 1 and 100 nm. Due to the decreasing size of particles or molecules, corresponding nanomaterials feature unique surface and colloidal properties (Pelster and Simon 1999).”
BackgroundModeling the viscosity and aggregation of suspensions of highly anisotropic nanoparticles
Puisto, A., Illa, X., Mohtaschemi, M., & Alava, M. J. (2012) · The European Physical Journal E · doi:10.1140/epje/i2012-12006-1 · Cited by 42
Vuoriluoto, M., Orelma, H., Johansson, L., Zhu, B., Poutanen, M., Walther, A., Laine, J., & Rojas, O. J. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b07628 · Cited by 42
Self-citationNanofibrillation of TEMPO-oxidized bleached hardwood kraft cellulose at high solids content
Kekäläinen, K., Liimatainen, H., Biale, F., & Niinimäki, J. (2015) · Holzforschung · doi:10.1515/hf-2014-0269 · Cited by 40
Production of cellulose nanofibers using phenolic enhanced surface oxidation
Tabar, I. B., Zhang, X., Youngblood, J. P., & Mosier, N. S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.058 · Cited by 37
Industrial application of orange tree nanocellulose as papermaking reinforcement agent
Espinosa, E., Arrebola, R. I., Bascón-Villegas, I., Sánchez-Gutiérrez, M., Domínguez‐Robles, J., & Rodríguez, A. (2020) · Cellulose · doi:10.1007/s10570-020-03353-w · Cited by 35
Novel Micro- and Nanocellulose-Based Delivery Systems for Liposoluble Compounds
Casanova, F., Pereira, C. F., Ribeiro, A. B., Freixo, R. J., Costa, E. M., Pintado, M., Fernandes, J. C., & Ramos, Ó. L. (2021) · Nanomaterials · doi:10.3390/nano11102593 · Cited by 39
Advanced Cellulosic Materials Toward High‐Performance Metal Ion Batteries
Wei, J., Ma, Q., Teng, Y., Yang, T., Wong, K. H., Cui, Y., Zheng, B., Li, D., Luo, D., & Yu, A. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202400208 · Cited by 36
The non-trivial role of native xylans on the preparation of TEMPO-oxidized cellulose nanofibrils
Meng, Q., Li, H., Fu, S., & Lucia, L. A. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.07.021 · Cited by 38
CHEMICAL TREATMENT AND MODIFICATION OF JUTE FIBER SURFACE
Amantes, B. D. P., de Melo, R. P., Neto, R. P. C., & Marques, M. D. F. V. (2017) · Chemistry & Chemical Technology · doi:10.23939/chcht11.03.333 · Cited by 35
Dimić‐Mišić, K., Maloney, T. C., & Gane, P. A. C. (2017) · Cellulose · doi:10.1007/s10570-017-1584-3 · Cited by 36
“2013a, b), the high surface charge on NFC, Table 1, increases the level of bound water and particle– particle repellence, with a consequential increase in stability against flocculation of the system (Pääkkö et al. 2007; Ono et al. 2004).”
BackgroundInteractions between microfibrillar cellulose and carboxymethyl cellulose in an aqueous suspension
Agarwal, D., MacNaughtan, W., & Foster, T. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.12.086 · Cited by 42
Schenker, M., Schoelkopf, J., Gane, P. A. C., & Mangin, P. J. (2018) · Cellulose · doi:10.1007/s10570-018-2117-4 · Cited by 34
Zhou, H., John, F. J. S., & Zhu, J. Y. (2019) · Cellulose · doi:10.1007/s10570-019-02250-1 · Cited by 36
Souza, L. O., Lessa, O. A., Dias, M. C., Tonoli, G. H. D., Rezende, D. V. B., Martins, M. A., Neves, I. C. O., de Resende, J. V., Carvalho, E. E. N., Boas, E. V. D. B. V., et al. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.03.037 · Cited by 34
Arginine/Nanocellulose Membranes for Carbon Capture Applications
Venturi, D., Chrysanthou, A., Dhuiège, B., Missoum, K., & Baschetti, M. G. (2019) · Nanomaterials · doi:10.3390/nano9060877 · Cited by 34
Nanocellulose—fabrication, structure, properties, and application in the area of care and cure
Ioelovich, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-41533-0.00009-x · Cited by 40
Chen, G., Yu, H., Zhang, C., Zhou, Y., & Yao, J. (2016) · Journal of Nanoparticle Research · doi:10.1007/s11051-016-3355-8 · Cited by 35
Prakobna, K., Berthold, F., Medina, L., & Berglund, L. A. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.023 · Cited by 35
Ghamari, M., Suvish, See, C. H., Yu, H., Anitha, T., Balamurugan, V. T., Velusamy, S., Hughes, D. J., & Sundaram, S. (2025) · The Chemical Record · doi:10.1002/tcr.202400249 · Cited by 36
Hokkanen, S., Repo, E., Bhatnagar, A., Tang, W. Z., & Sillanpää, M. E. T. (2014) · Environmental Technology · doi:10.1080/09593330.2014.903300 · Cited by 33
Plant-derived oxidized nanofibrillar cellulose-chitosan composite as an absorbable hemostat
Sukul, M., Ventura, R. D., Bae, S. H., Choi, H. J., Lee, S. Y., & Lee, B. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.03.102 · Cited by 33
Asghari, M., Zarchi, A. A. K., & Taheri, R. A. (2021) · Starch - Stärke · doi:10.1002/star.202000033 · Cited by 33
Obele, C. M., Ibenta, M. E., Chukwuneke, J. L., & Nwanonenyi, S. C. (2021) · Cellulose · doi:10.1007/s10570-021-03694-0 · Cited by 33
Shen, Z., Kwon, S., Lee, H. L., Toivakka, M., & Oh, K. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.10.075 · Cited by 34
Facile preparation of optically transparent and hydrophobic cellulose nanofibril composite films
Qing, Y., Cai, Z., Wu, Y., Yao, C. J., Wu, Q., & Li, X. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.08.016 · Cited by 35
“…of pulp fiber into microfibrils and microfibril bundles ith nano-scale diameter, under repeated high-shear mechanical omogenization (Herrick et al., 1983; Spence et al., 2010; Zhao t al., 2015), in combination with chemical (Saito et al., 2009), r enzymatic pretreatment (Pääkkö et al., 2007).”
BackgroundReinforcing effect of carboxymethylated nanofibrillated cellulose powder on hydroxypropyl cellulose
Eyholzer, C., López-Suevos, F., Tingaut, P., Zimmermann, T., & Oksman, K. (2010) · Cellulose · doi:10.1007/s10570-010-9423-9 · Cited by 40
Development of facture free clay-based aerogel: Formulation and architectural mechanisms
Huang, P., & Fan, M. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.01.058 · Cited by 33
Nanofibrillar cellulose-alginate hydrogel coated surgical sutures as cell-carrier systems
Laurén, P., Somersalo, P., Pitkänen, I., Lou, Y., Urtti, A. O., Partanen, J. P., Seppälä, J. V., Madetoja, M., Laaksonen, T., Mäkitie, A. A., et al. (2017) · PLoS ONE · doi:10.1371/journal.pone.0183487 · Cited by 37
Wang, Y.-C., Feng, Y., Wang, X., Ji, C., Xiao, Z., & Luo, Y. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110193 · Cited by 32
Advanced Nano-biocomposites Based on Starch
Xie, F., Pollet, É., Halley, P. J., & Avérous, L. (2014) · Springer eBooks · doi:10.1007/978-3-319-03751-6_50-1 · Cited by 40
Extensional viscosity of microfibrillated cellulose suspensions
Moberg, T., Rigdahl, M., Stading, M., & Bragd, E. L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.041 · Cited by 33
Yoo, S., & Hsieh, J. S. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901621n · Cited by 38
Dimić‐Mišić, K., Salo, T., Paltakari, J., & Gane, P. A. C. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-02-p253-270 · Cited by 33
“These properties, in turn, depend on the origin of the raw cellulosic micro and macroscopic fibres (Ahola et al. 2008, Pääkko et al. 2007, Siqueira et al. 2010).”
BackgroundAgricultural crop residue as a source for the production of cellulose nanofibrils
Boufi, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00006-1 · Cited by 36
Olejnik, K., Skalski, B., Stanisławska, A., & Wysocka-Robak, A. (2017) · Cellulose · doi:10.1007/s10570-017-1404-9 · Cited by 32
Oil-in-water Pickering emulsions from three plant-derived regenerated celluloses
Li, X., Ding, L., Zhang, Y., Wang, B., Jiang, Y., Feng, X., Mao, Z., & Sui, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.037 · Cited by 32
Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges
Liu, H., Liu, K., Han, X., Xie, H., Si, C., Liu, W., & Bae, Y. (2020) · Current Medicinal Chemistry · doi:10.2174/0929867327666200303102859 · Cited by 33
Navarro, J. R. G., Rostami, J., Ahlinder, A., Mietner, J. B., Bernin, D., Saake, B., & Edlund, U. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00210 · Cited by 33
Junka, K., Filpponen, I., Lindström, T., & Laine, J. (2013) · Cellulose · doi:10.1007/s10570-013-0043-z · Cited by 32
“…the pre-treatment techniques (chemical, enzymatic and physical) to facilitate the disintegration and lower the energy consumption of NFC production have added to the appeal of this material for commercial processes (Isogai et al. 2011; Klemm et al. 2011; Pääkkö et al. 2007; Saito et al. 2007).”
Self-citationCellulose nanofiber aerogel production and applications
Nakagaito, A. N., Kondo, H., & Takagi, H. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413494110 · Cited by 33
“The cellulose nanofibers were produced by a unique method of enzymatic pre-treatment and mechanical fibrillation by a microfluidizer.(7) Sehaqui et al.”
MethodTechnical Aspects on Rheological Characterization of Microfibrillar Cellulose Water Suspensions
Saarinen, T., Lille, M. E., & Seppälä, J. V. (2009) · Cited by 32
Paajanen, A., Sonavane, Y., Ignasiak, D., Ketoja, J. A., Maloney, T. C., & Paavilainen, S. (2016) · Cellulose · doi:10.1007/s10570-016-1076-x · Cited by 35
“2008) and enzymatic (Pääkkö et al. 2007; Henriksson et al. 2007) pretreatments have been suggested to reduce the disintegration energy in the production of MFC and NFC.”
BackgroundStructural, rheological and dynamics insights of hydroxypropyl guar gel-like systems
Berlangieri, C., Poggi, G., Murgia, S., Monduzzi, M., Dei, L., & Carretti, E. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.02.025 · Cited by 32
Ru, J., Tong, C., Chen, N., Shan, P., Zhao, X., Liu, X., Chen, J., Li, Q., Liu, X., Liu, H., et al. (2018) · Cellulose · doi:10.1007/s10570-018-2146-z · Cited by 36
Chemical Composition and Properties of Wood
Stevanović, T. (2016) · Wiley eBooks · doi:10.1002/9781118773727.ch3 · Cited by 39
Surface Chemistry of Nanocellulose
Zhu, G., & Lin, N. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch5 · Cited by 36
A quick pipeline for the isolation of 3D cell culture‐derived extracellular vesicles
Kyykallio, H., Faria, A. V. D. S., Hartman, R., Capra, J., Rilla, K. J., & Siljander, P. R. M. (2022) · Journal of Extracellular Vesicles · doi:10.1002/jev2.12273 · Cited by 34
“(Bhattacharya et al., 2012; Pääkkö et al., 2007).”
Banvillet, G., Grange, C., Curtil, D., Putaux, J., Déprès, G., Belgacem, M. N., & Bras, J. (2023) · Cellulose · doi:10.1007/s10570-022-05016-4 · Cited by 33
Nanocellulose from a colloidal material perspective
Sanchez-Salvador, J. L., Xu, H., Balea, A., Negro, C., & Blanco, Á. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1231404 · Cited by 37
Paper strength improvement by inclusion of nano-lignocellulose to Chemi-thermomechanical pulp
Osong, S. H., Norgren, S., & Engstrand, P. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-02-p309-316 · Cited by 37
“In recent years, there has been tremendous work in the research field of nanocellulose (Andresen et al. 2006; Henriksson et al. 2007; Pääkkö et al. 2007; Eichhorn et al. 2010; Spence et al. 2010a; Spence et al. 2010b) but, few scholars have envisaged the use of the low quality fine fractions that…”
BackgroundMethodMalho, J., Ouellet‐Plamondon, C., Rüggeberg, M., Laaksonen, P. H., Ikkala, O. T., Burgert, I., & Linder, M. B. (2014) · Biomacromolecules · doi:10.1021/bm501514w · Cited by 33
Self-citationMesh size analysis of cellulose nanofibril hydrogels using solute exclusion and PFG-NMR spectroscopy
Jowkarderis, L., & van de Ven, T. G. M. (2015) · Soft Matter · doi:10.1039/c5sm01752a · Cited by 36
Effect of Chemical Functionality on the Mechanical and Barrier Performance of Nanocellulose Films
Durán, V. L., Hellwig, J., Larsson, P. T., Wågberg, L., & Larsson, P. T. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00452 · Cited by 35
Self-citationJadhav, H., Jadhav, A., Takkalkar, P., Hossain, N., Nizamuddin, S., Zahoor, M., Jamal, M., Mubarak, N. M., Griffin, G. J., & Kao, N. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02287-y · Cited by 31
Pu, J., Wang, L., Zhang, W., Ma, J., Zhang, X., & Putnis, C. V. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118057 · Cited by 31
The use of enzymes to isolate cellulose nanomaterials: A systematic map review
Squinca, P., Bilatto, S., Junior, A. C. B., & Farinas, C. S. (2022) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2022.100212 · Cited by 41
Wang, X., Zeng, J., & Zhu, J. Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119885 · Cited by 33
Moreau, C., Falourd, X., Talantikite, M., Cathala, B., & Villares, A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c03754 · Cited by 33
All-cellulose multilayers: long nanofibrils assembled with short nanocrystals
Olszewska, A., Kontturi, E., Laine, J., & Österberg, M. (2013) · Cellulose · doi:10.1007/s10570-013-9949-8 · Cited by 34
“The most common and still the most efficient way to prepare NFC is to disintegrate wood pulp fibers by mechanical shearing alone or in combination with enzymatic or chemical pretreatment before the fibrillation (Isogai et al. 2011; Pääkkö et al. 2007; Turbak et al. 1983; Wågberg et al. 2008).”
BackgroundSelf-citationNge, T. T., Lee, S. H., & Endo, T. (2013) · Cellulose · doi:10.1007/s10570-013-9962-y · Cited by 31
“In addition, Pääkkö et al. (2007) have reported that MFC can be prepared by enzymatic hydrolysis combined with mechanical shearing and HPH. MFCs obtained by these methods were separated into two fractions with different lateral dimensions of 5–6 nm and 10–20 nm (Pääkkö et al. 2007).”
MethodSorvari, A., Saarinen, T., Haavisto, S., Salmela, J., Vuoriluoto, M., & Seppälä, J. V. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.032 · Cited by 32
Salmi, J., Nypelö, T., Österberg, M., & Laine, J. (2009) · BioResources · doi:10.15376/biores.4.2.602-625 · Cited by 31
“The development of nanofibrillar cellulose has opened the possibility to use cellulose nanofibrils as part of molecular architectures ( Paakko et al. 2007 ).”
BackgroundMethodInfluentialSelf-citationDirect Adhesive Measurements between Wood Biopolymer Model Surfaces
Gustafsson, E., Johansson, E. E., Wågberg, L., & Pettersson, T. (2012) · Biomacromolecules · doi:10.1021/bm300762e · Cited by 32
The role of heteropolysaccharides in developing oxidized cellulose nanofibrils
Meng, Q., Fu, S., & Lucia, L. A. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.058 · Cited by 31
Colson, J., Bauer, W., Mayr, M., Fischer, W. J., & Gindl‐Altmutter, W. (2016) · Cellulose · doi:10.1007/s10570-016-0987-x · Cited by 33
“This result is the exact opposite to what has been found with similar measurements on hard sphere suspensions, where a viscosity minimum was observed at a content of 25 % of small spheres (Parkinson et al. 1970).”
ResultNanocellulose and Its Interface: On the Road to the Design of Emerging Materials
Bettotti, P., & Scarpa, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202101593 · Cited by 33
Zhang, L.-Q., Niu, B., Yang, S.-G., Huang, H., Zhong, G., & Li, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01171 · Cited by 31
Chemically Modified Nanocellulose from Rice Husk: Synthesis and Characterisation
Kaur, M., Kumari, S., & Sharma, P. (2018) · Advances in Research · doi:10.9734/air/2018/38934 · Cited by 31
Emerging Cellulose-Based Nanomaterials and Nanocomposites
Sheikhi, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-814615-6.00009-6 · Cited by 37
Gouda, K., Bhowmik, S., & Das, B. (2021) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2021-0024 · Cited by 31
“This enzymatic treatment also reduces the rate of energy consumption with endoglucanase enzymatic treatment and exhibits better structure in wood nanofiber compared to acid hydrolysis treatment [84].”
BackgroundXyloglucan-cellulose nanocrystal-chitosan double network hydrogels for soft actuators
Leray, N., Talantikite, M., Villares, A., & Cathala, B. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119753 · Cited by 31
Cellulose Nanocrystals Examined by Atomic Force Microscopy: Applications and Fundamentals
Moud, A. A. (2022) · ACS Food Science & Technology · doi:10.1021/acsfoodscitech.2c00289 · Cited by 33
Supramolecular Nanofibrillar Polymer Hydrogels
Chau, M., Sriskandha, S. E., Thérien‐Aubin, H., & Kumacheva, E. (2015) · Advances in polymer science · doi:10.1007/978-3-319-15404-6_5 · Cited by 32
Clean and reactive nanostructured cellulose surface
Österberg, M., Peresin, M. S., Johansson, L., & Tammelin, T. (2013) · Cellulose · doi:10.1007/s10570-013-9920-8 · Cited by 30
“The main reasons for the growing interest in nanocellulose are the development of energy efficient and up-scalable production methods (Pääkkö et al. 2007; Saito et al. 2006; Wågberg et al. 2008) and the extraordinary properties of this renewable material (Eichhorn et al. 2010).”
MethodSelf-citationAfewerki, S., Alimohammadzadeh, R., Osong, S. H., Tai, C., Engstrand, P., & Córdova, A. (2017) · Global Challenges · doi:10.1002/gch2.201700045 · Cited by 31
Metadata
- Authors
- Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., & Lindström, T.
- Affiliations
- Trinity College Dublin (IE)
- Corresponding author
- Ikkala, O.
- Lindström, T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-03
- Volume
- 8
- Issue
- 6
- Pages
- 1934-1941
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2001245625
- Cited by
- 1,962
- References
- 23
- Citations by year
- 2026: 54 · 2025: 65 · 2024: 65 · 2023: 99 · 2022: 130 · 2021: 127 · 2020: 164 · 2019: 145 · 2018: 144 · 2017: 178 · 2016: 126 · 2015: 146 · 2014: 133 · 2013: 105 · 2012: 93
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- VINNOVA
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- microfibrillated cellulose, enzymatic hydrolysis, mechanical shearing, high-pressure homogenization, cellulose fibrillation, cellulose gels, storage modulus, cellulose reinforcement
- MeSH terms
- Cellulose, Gels, Hydrogen-Ion Concentration, Hydrolysis, Magnetic Resonance Spectroscopy, Rheology, Stress, Mechanical, Temperature, Viscosity, Wood, Microscopy, Atomic Force, Cryoelectron Microscopy, Microscopy, Electron, Transmission, Macromolecular Substances, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.