Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Toward exploiting the attractive mechanical properties of cellulose I nanoelements, a novel route is demonstrated, which combines enzymatic hydrolysis and mechanical shearing. Previously, an aggressive acid hydrolysis and sonication of cellulose I containing fibers was shown to lead to a network of weakly hydrogen-bonded rodlike cellulose elements typically with a low aspect ratio. On the other hand, high mechanical shearing resulted in longer and entangled nanoscale cellulose elements leading to stronger networks and gels. Nevertheless, a widespread use of the latter concept has been hindered because of lack of feasible methods of preparation, suggesting a combination of mild hydrolysis and shearing to disintegrate cellulose I containing fibers into high aspect ratio cellulose I nanoscale elements. In this work, mild enzymatic hydrolysis has been introduced and combined with mechanical shearing and a high-pressure homogenization, leading to a controlled fibrillation down to nanoscale and a network of long and highly entangled cellulose I elements. The resulting strong aqueous gels exhibit more than 5 orders of magnitude tunable storage modulus G' upon changing the concentration. Cryotransmission electron microscopy, atomic force microscopy, and cross-polarization/magic-angle spinning (CP/MAS) 13C NMR suggest that the cellulose I structural elements obtained are dominated by two fractions, one with lateral dimension of 5-6 nm and one with lateral dimensions of about 10-20 nm. The thicker diameter regions may act as the junction zones for the networks. The resulting material will herein be referred to as MFC (microfibrillated cellulose). Dynamical rheology showed that the aqueous suspensions behaved as gels in the whole investigated concentration range 0.125-5.9% w/w, G' ranging from 1.5 Pa to 105 Pa. The maximum G' was high, about 2 orders of magnitude larger than typically observed for the corresponding nonentangled low aspect ratio cellulose I gels, and G' scales with concentration with the power of approximately three. The described preparation method of MFC allows control over the final properties that opens novel applications in materials science, for example, as reinforcement in composites and as templates for surface modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to the more aggressive acid hydrolysis treatment, the enzymatic treatment yielded longer and highly entangled nanoscale fibrils.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Finally, the enzymatic step leads to reduced energy consumption allowing widespread use of the material”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“They demonstrated that the enzymatic hydrolysis step avoids blocking problems during the homogenization treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Xylanases are hydrolytic enzymes that modify the random amorphous compounds (hemicelluloses) present in the plant fiber.”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
In the citing paper
“They can also initiate the random hydrolysis of the b-1,4 non-reducing terminal regions located between the glycosidic linkages of the glucose units (Hubbe, Rojas, Lucia, & Sain, 2008;Pääkko et al., 2007).”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Numerical Recipes: The Art of Scientific Computing
Ziegel, E. (1987) · Technometrics · doi:10.1080/00401706.1987.10488304 · Cited by 6,702
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Native cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Dynamics of concentrated polymer systems. Part 3.—The constitutive equation
Doi, M., & Edwards, S. F. (1978) · J. Chem. Soc., Faraday Trans. 2 · doi:10.1039/f29787401818 · Cited by 615
Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy
Wickholm, K., Larsson, P. T., & Iversen, T. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(98)00236-5 · Cited by 423
Self-citationA CP/MAS13C NMR investigation of molecular ordering in celluloses
Larsson, P. T., Wickholm, K., & Iversen, T. (1997) · Carbohydrate Research · doi:10.1016/s0008-6215(97)00130-4 · Cited by 399
Self-citationChemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Research works printed but not linked: 28
- Hult E. L., 2001, Polymer, 42, 3314
- Hult E. L., 2002, Holzforschung, 56, 184
- Liu H., 2002, Part B: Polym. Phys
- Kim C.-W., 2006, Polymer, 47, 5107
- Fleming K., 2001, ChemEur. J., 7, 1835
- Lima M. M. D., 2004, Macromol. Rapid Commun., 25, 787
- Araki J., 1998, Physicochem. Eng. Aspects
- Turbak A. F., 1983, Appl. Polym. Symp.
- Herrick F. W., 1983, Appl. Polym. Symp.
- Nakagaito A. N., 2004, Process
- Berglund L. A., 2005, Natural Fibers, Biopolymers, and Biocomposites
- Nakagaito A. N., 2005, Process
- Nakagaito A. N., 2005, Process
- Henriksson M., 2007, Eur. Polym. J.
- Ono H., 2004, Polym. J., 36, 694
- Tatsumi D., 2002, J. Soc. Rheol., Jpn., 30, 32
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 61
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 73
- Lowys M.-P., 2001, Food Hydrocolloids, 15, 32
- Ono H., 1998, Cellulose, 5, 247
- Ono H., 2001, Trans. Mater. Res. Soc. Jpn., 26, 572
- Engström A.-C., 2006, Biomacromolecules, 7, 2031
- Hausalo T., 1999, Pulp and Paper Testing, 63
- Hiltunen E., 1999, Pulp and Paper Testing, 135
- Katz K., 1984, Sven. Papperstid., 87, R48
- Guenet J.-M., 2000, J. Rheol., 44, 960
- Sahimi M., 1998, Phys. Rep., 306, 395
- Soft Matter Physics, 1999, Springer-Verlag: Berlin
Cited by
Items 801–900 of 1,002
Naderi, A., Lindström, T., Sundström, J., Flodberg, G., & Erlandsson, J. (2016) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2016-31-03-p364-371 · Cited by 48
“Finally, it is noted that the OP values of NFCEnz and NFCCarb (measured at 23C/50% RH) are comparable to those reported for several well-delaminated NFC systems (Siró et al. 2011; Aulin et al. 2012; Chinga-Carrasco, Syverud 2012; Naderi et al. 2016).”
ResultSelf-citationPérez‐Pacheco, E., Canto-Pinto, J. C., Moo‐Huchin, V. M., Estrada-Mota, I. A., Estrada‐León, R. J., & Chel‐Guerrero, L. (2016) · InTech eBooks · doi:10.5772/65397 · Cited by 52
Characterization of cellulose nanofibrils prepared by direct TEMPO-mediated oxidation of hemp bast
Puangsin, B., Soeta, H., Saito, T., & Isogai, A. (2017) · Cellulose · doi:10.1007/s10570-017-1390-y · Cited by 47
Jongaroontaprangsee, S., Chiewchan, N., & Devahastin, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.008 · Cited by 48
Cellulose nanofibrils for biomaterial applications
Sharip, N. S., & Ariffin, H. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.074 · Cited by 48
Impact of microfluidization on the microstructure and functional properties of pea hull fibre
Morales‐Medina, R., Dong, D., Schalow, S., & Drusch, S. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105660 · Cited by 49
Liao, J., Pham, K. A., & Breedveld, V. (2020) · Cellulose · doi:10.1007/s10570-020-03572-1 · Cited by 50
“This scaling, together with the scaling of specific viscosity, gsp * c a, has been extensively studied for chitosan suspensions, where gsp = (g0 – gs)/gs and gs is the solvent viscosity (Cho et al. 2006; Klossner et al. 2008; Pakravan et al. 2011).”
BackgroundSorghum as a novel biomass for the sustainable production of cellulose nanofibers
Pennells, J., Cruickshank, A., Chaléat, C. M., Godwin, I. D., & Martin, D. J. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113917 · Cited by 47
Swelling of cellulosic fibers in aqueous systems: A Review of chemical and mechanistic factors
Hubbe, M. A., Sjöstrand, B., Lestelius, M., Håkansson, H., Swerin, A., & Henriksson, G. (2024) · BioResources · doi:10.15376/biores.19.3.hubbe · Cited by 57
Affibody conjugation onto bacterial cellulose tubes and bioseparation of human serum albumin
Orelma, H., Morales, L. O., Johansson, L., Hoeger, I. C., Filpponen, I., Castro, C. I., Rojas, O. J., & Laine, J. (2014) · RSC Advances · doi:10.1039/c4ra08882d · Cited by 50
Self-citationLight-stimulated mechanically switchable, photopatternable cellulose nanocomposites
Biyani, M. V., Jorfi, M., Weder, C., & Foster, E. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00487f · Cited by 48
Substrate role in coating of microfibrillated cellulose suspensions
Kumar, V., Koppolu, V. R., Bousfield, D. W., & Toivakka, M. (2017) · Cellulose · doi:10.1007/s10570-017-1201-5 · Cited by 53
Rol, F., Banvillet, G., Meyer, V., Petit‐Conil, M., & Bras, J. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2414-1 · Cited by 49
“refining step followed by an enzymatic [21, 22] or chemical pretreatment as well as a common mechanical treatment such as a grinder [14–16, 23, 24], a microfluidizer [25–27], or a homogenizer [28–33].”
MethodMaterials from trees assembled by 3D printing – Wood tissue beyond nature limits
Markstedt, K., Håkansson, K. M. O., Toríz, G., & Gatenholm, P. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.02.005 · Cited by 46
Valls, C., Pastor, F. I. J., Roncero, M. B., Vidal, T., Dı́az, P., Martínez, J., & Valenzuela, S. V. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1502-z · Cited by 47
Onyianta, A. J., O’Rourke, D., Sun, D., Popescu, C., & Dorris, M. (2020) · Cellulose · doi:10.1007/s10570-020-03223-5 · Cited by 47
“…unmodified kraft wood cellulose suspension at 0.5 wt. % (Taheri and Samyn 2016) and the successive four-step CNF production from wood cellulose suspension involving a refining step, an enzymatic treatment step, a second refining step, and a high-pressure homogenisation step (Pääkko et al. 2007).”
MethodInfluentialXu, Y. B., Yang, S., Zhao, P., Wu, M., Song, X., & Ragauskas, A. J. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117253 · Cited by 44
Use of Endoglucanase and Accessory Enzymes to Facilitate Mechanical Pulp Nanofibrillation
Han, X., Bi, R., Khatri, V., Oğuzlu, H., Takada, M., Jiang, J., Jiang, F., Bao, J., & Saddler, J. N. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08588 · Cited by 46
Henriksson, M., Fogelström, L., Berglund, L. A., Johansson, M. K. G., & Hult, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.09.006 · Cited by 47
“In a previous study, an enzymatic pretreatment procedure was developed in order to facilitate preparation of cellulose nanofibers from wood pulp [10,11].”
MethodOnline determination of anisotropy during cellulose nanofibril assembly in a flow focusing device
Håkansson, K. M. O. (2015) · RSC Advances · doi:10.1039/c4ra12285b · Cited by 43
Controlled release of chlorhexidine digluconate using β-cyclodextrin and microfibrillated cellulose
Lavoine, N., Tabary, N., Desloges, I., Martel, B., & Bras, J. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.06.021 · Cited by 54
A Bottom-up Route to a Chemically End-to-End Assembly of Nanocellulose Fibers
Yang, H., & van de Ven, T. G. M. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00480 · Cited by 46
Navarro, J. R. G., & Edlund, U. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00398 · Cited by 43
Lee, Y. R., Park, D.-H., Choi, S. K., Kim, M., Baek, H. S., Nam, J., Chung, C. B., Osuji, C. O., & Kim, J. W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08783 · Cited by 44
Cellulose nanofibers from residues to improve linting and mechanical properties of recycled paper
Balea, A., Merayo, N., Fuente, E., Negro, C., Delgado‐Aguilar, M., Mutjé, P., & Blanco, Á. (2017) · Cellulose · doi:10.1007/s10570-017-1618-x · Cited by 49
Nanofibrillated cellulose as a coating agent to improve print quality of synthetic fiber sheets
Hamada, H., & Bousfield, D. W. (2010) · TAPPI Journal · doi:10.32964/tj9.11.25 · Cited by 49
Nanocellulose: Sustainable biomaterial for developing novel adhesives and composites
Candan, Z., Tozluoğlu, A., Gönültaş, O., Yıldırım, M., Fidan, H., Alma, M. H., & Salan, T. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89909-3.00015-8 · Cited by 49
Ion-regulating Hybrid Electrolyte Interface for Long-life and Low N/P Ratio Lithium Metal Batteries
Ding, C., Liu, Y., Ono, L. K., Tong, G., Zhang, C., Zhang, J., Lan, J., Yu, Y., Chen, B., & Qi, Y. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.05.035 · Cited by 43
Interactions between inorganic nanoparticles and cellulose nanofibrils
Nypelö, T., Pynnönen, H., Österberg, M., Paltakari, J., & Laine, J. (2012) · Cellulose · doi:10.1007/s10570-012-9656-x · Cited by 46
“By combining chemical pretreatment of pulp with mechanical refining, cellulose fibers can be disintegrated into nanosized fibrils (Pääkkö et al. 2007) or processed into cellulose nanocrystals (Habibi et al.”
BackgroundSelf-citation3D bioprinting for the repair of articular cartilage and osteochondral tissue
Chartrain, N. A., Gilchrist, K. H., Ho, V. B., & Klarmann, G. J. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00239 · Cited by 44
Rana, M. M., & Siegler, H. D. L. H. (2022) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-022-00797-7 · Cited by 44
Cellulose Gel Mechanoreceptors – Principles, Applications and Prospects
Shen, X., Zhao, D., Xie, Y., Wang, Q., Shamshina, J. L., Rogers, R. D., & Sun, Q. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214317 · Cited by 44
Multi-level toxicity assessment of engineered cellulose nanofibrils inDaphnia magna
Ogonowski, M., Edlund, U., Gorokhova, E., Linde, M., Ek, K., Liewenborg, B., Könnecke, O., Navarro, J. R. G., & Breitholtz, M. (2018) · Nanotoxicology · doi:10.1080/17435390.2018.1464229 · Cited by 48
Trigui, K., de Loubens, C., Magnin, A., Putaux, J., & Boufi, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116342 · Cited by 46
Morphology and Rheology of Heavy Crude Oil/Water Emulsions Stabilized by Microfibrillated Cellulose
Gorbacheva, S. N., & Ilyin, S. O. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02797 · Cited by 45
Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review
Moud, A. A., & Moud, A. A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123391 · Cited by 47
Bader, Q. A., Al-Sharify, Z. T., Dhabab, J. M., Zaidan, H. K., Rheima, A. M., Athair, D. M., Joseph, T. M., & Kianfar, E. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100993 · Cited by 45
Janardhnan, S., & Sain, M. M. (2011) · BioResources · doi:10.15376/biores.6.2.1242-1250 · Cited by 45
Ren, S., Sun, X., Lei, T., & Wu, Q. (2014) · Journal of Nanomaterials · doi:10.1155/2014/582913 · Cited by 44
“[14] demonstrated that a combination of high-pressure shear forces and mild enzymatic hydrolysis constitutes a new and efficient method to prepare MFC with a well-controlled diameter in the nanometer range and to maintain high aspect ratio, in contrast to acid hydrolysis.”
MethodChitin Microfibers Reinforce Soy Protein Gels Cross-Linked by Transglutaminase
Yuan, Y., Sun, Y., Wan, Z.-L., Yang, X., Wu, J.-F., Yin, S., Wang, J., & Guo, J. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf500922n · Cited by 41
Han, S., Yao, Q., Jin, C., Fan, B., Zheng, H., & Sun, Q. (2016) · Polymer Composites · doi:10.1002/pc.24249 · Cited by 41
Parize, D. D. D. S., de Oliveira, J. E., Williams, T., Wood, D. F., Avena‐Bustillos, R. J., Klamczynski, A. P., Glenn, G. M., Marconcini, J. M., & Mattoso, L. H. C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.019 · Cited by 46
“CNC can also be obtained by combining mechanical shear with enzymatic hydrolysis (Pa & Ahola, 2007; Sun, Xu, Xu, & Sun, 2013), although acid hydrolysis is the most widely used route for CNC production (Eichhorn et al., 2010; Figueirêdo et al., 2012).”
MethodPoly (vinyl alcohol) as a capping agent in oven dried cellulose nanofibrils
Velásquez-Cock, J. A., H, B. G., Posada, P., G., A. S., Hoyos, C. G., Castro, C. I., Gañán, P. F., & Zuluaga, R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.089 · Cited by 41
Liu, J., Bacher, M., Rosenau, T., Willför, S. M., & Mihranyan, A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01334 · Cited by 45
Wet stable and mechanically robust cellulose nanofibrils (CNF) based hydrogel
Hossen, M. R., Dadoo, N., Holomakoff, D. G., Co, A., Gramlich, W. M., & Mason, M. D. (2018) · Polymer · doi:10.1016/j.polymer.2018.07.016 · Cited by 48
Starch replacement in gluten free bread by cellulose and fibrillated cellulose
Ren, Y., Linter, B. R., & Foster, T. J. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105957 · Cited by 43
Zhang, C., Cha, R., Zhang, P., Luo, H., & Jiang, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132562 · Cited by 44
Three-Dimensional Microstructural Properties of Nanofibrillated Cellulose Films
Miettinen, A., Chinga‐Carrasco, G., & Kataja, M. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15046423 · Cited by 50
Effect of pretreatment of bagasse pulp on properties of isolated nanofibers and nanopaper sheets
Hassan, M. L., Mathew, A. P., Hassan, E. A., & Oksman, K. (2010) · Wood and Fiber Science · Cited by 57
Hybrid films from cellulose nanomaterials—properties and defined optical patterns
Leppänen, I., Hokkanen, A. P., Österberg, M., Vähä‐Nissi, M., Harlin, A., & Orelma, H. (2022) · Cellulose · doi:10.1007/s10570-022-04795-0 · Cited by 46
Self-citationFrom Nature to Innovation: Advances in Nanocellulose Extraction and Its Multifunctional Applications
Hansini, A. M. P., Galpaya, C., Gunasena, M. D. K. M., Abeysundara, P. M., Kirthika, V., Bhagya, L., Gunawardana, N., & Koswattage, K. R. (2025) · Molecules · doi:10.3390/molecules30132670 · Cited by 45
Rapid nanopaper production by spray deposition of concentrated microfibrillated cellulose slurries
Beneventi, D., Zeno, E., & Chaussy, D. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.023 · Cited by 44
Antibacterial paperboard packaging using microfibrillated cellulose
Lavoine, N., Desloges, I., Manship, B. M., & Bras, J. (2015) · Journal of Food Science and Technology · doi:10.1007/s13197-014-1675-1 · Cited by 45
The effect of Fenton chemistry on the properties of microfibrillated cellulose
Hellström, P., Heijnesson-Hultén, A., Paulsson, M., Håkansson, H., & Germgård, U. (2014) · Cellulose · doi:10.1007/s10570-014-0243-1 · Cited by 45
“Another method has been proposed by Pääkkö et al. (2007) who demonstrated that a mild enzymatic hydrolysis with endoglucanase in combination with high pressure shear forces produced MFC with a well-defined diameter and a high aspect ratio.”
MethodNanocomposite films based on cellulose nanofibrils and water-soluble polysaccharides
Lucenius, J., Parikka, K., & Österberg, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.08.001 · Cited by 40
Self-citationWang, Q., Zhu, J. Y., Hunt, C. G., & Zhan, H. Y. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24483 · Cited by 42
Bacterial NanoCellulose Characterization
Kondo, T., Rytczak, P., & Bielecki, S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-444-63458-0.00004-4 · Cited by 50
Mesoporous guar galactomannan based biocomposite aerogels through enzymatic crosslinking
Ghafar, A., Gurikov, P. A., Subrahmanyam, R. P., Parikka, K., Tenkanen, M., Smirnova, I. V., & Mikkonen, K. S. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.12.013 · Cited by 42
Nanofibers Produced from Agro-Industrial Plant Waste Using Entirely Enzymatic Pretreatments
Holland, C., Perzon, A., Cassland, P., Jensen, J. P., Langebeck, B., Sørensen, O. B., Whale, E., Hepworth, D., Plaice-Inglis, R., Moestrup, Ø., et al. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01435 · Cited by 43
Claro, F. C., Matos, M., Jordão, C., Avelino, F., Lomonaco, D., & Magalhães, W. L. E. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.089 · Cited by 41
Wang, C., Li, L., Sun, X., Qin, W., Wu, D., Hu, B., Raheem, D., Yang, W., Dong, H., Vasanthan, T., et al. (2019) · LWT · doi:10.1016/j.lwt.2019.108505 · Cited by 40
Alle, M., Bandi, R., Lee, S. H., & Kim, J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817852-2.00003-2 · Cited by 47
Marquez-Bravo, S., Doench, I., Molina, P., Bentley, F. E., Tamo, A. K., Passieux, R., Lossada, F., David, L., & Osorio‐Madrazo, A. (2021) · Polymers · doi:10.3390/polym13101563 · Cited by 43
Nanocellulose as an Avenue for Drug Delivery Applications: A Mini-Review
Varghese, R. S., Cherian, R. M., Chirayil, C. J., Antony, T., Kargarzadeh, H., & Thomas, S. (2023) · Journal of Composites Science · doi:10.3390/jcs7060210 · Cited by 40
Song, J., Tang, A., Liu, T., & Wang, J. (2013) · Nanoscale · doi:10.1039/c3nr33615h · Cited by 42
Nanocellulose‐Based Polymer Nanocomposite: Isolation, Characterization and Applications
Khalil, H. P. S. A., Davoudpour, Y., Aprilia, N. A. S., Mustapha, A., Hossain, S., Islam, N., & Dungani, R. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch11 · Cited by 45
Song, H. Y., Park, S. Y., Kim, S., Youn, H. J., & Hyun, K. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118765 · Cited by 39
Cellular biocomposites from polylactide and microfibrillated cellulose
Boissard, C. I. R., Bourban, P. ‐., Plummer, C. J. G., Neagu, R. C., & Månson, J. E. (2012) · Journal of Cellular Plastics · doi:10.1177/0021955x12448190 · Cited by 46
“procedure described in detail elsewhere.(22) The cellulose pulp was exposed to a combination of high pressure shear forces, enzymatic hydrolysis and a final homogenization step to give a water slurry with a dry MFC content of 3.”
MethodModification of nanofibrillated cellulose using amphiphilic block-structured galactoglucomannans
Lozhechnikova, A., Dax, D., Vartiainen, J., Willför, S. M., Xu, C., & Österberg, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.087 · Cited by 44
Self-citationZhang, Y., Wei, L., Hu, H., Zhao, Z., Huang, Z., Huang, A., Shen, F., Liang, J., & Qin, Y. (2018) · Cellulose · doi:10.1007/s10570-018-1780-9 · Cited by 39
“Moreover, cellulose esters as lubricant additives need to be evenly dispersed and dissolved in base oils, it is important to reduce the particle size or even to prepare nanoscale cellulose esters by highpressure homogenization (Paakko et al. 2007; Salaberria et al. 2015; Wang et al. 2017).”
BackgroundFneich, F., Ville, J., Seantier, B., & Aubry, T. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.099 · Cited by 40
Sun, H. Y., Bi, H., Ren, Z., Zhou, X., Ji, T., Xu, M., Huang, Z., & Cai, L. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109615 · Cited by 42
Hop, T. T. T., Mai, D. T., Cong, T. D., Nhi, T. T. Y., Loi, V. D., Hương, N. T. M., & Tung, N. T. (2022) · Results in Chemistry · doi:10.1016/j.rechem.2022.100540 · Cited by 43
Polysaccharide nanofiber made from euglenoid alga
Shibakami, M., Tsubouchi, G., Makoto, N., & Hayashi, M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.12.040 · Cited by 39
Gao, W., Xiang, Z., Chen, K., Yang, R., & Yang, F. Y. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.005 · Cited by 40
Wasim, M., Shi, F., Liu, J., Khan, M. R., Farooq, A., Sanbhal, N., Mensah, A., Li, X., Chen, Y., & Zhao, X. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06215-3 · Cited by 42
“Biotechnol 100(5):2063–2072 [103] Pääkkö M et al (2007) Enzymatic hydrolysis combined”
MethodWang, W., Ji, S., & Lee, I. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.037 · Cited by 40
Olszewska, A., Junka, K., Nordgren, N., Laine, J., Rutland, M. W., & Österberg, M. (2013) · Soft Matter · doi:10.1039/c3sm50578b · Cited by 45
Self-citationNanofibril Alignment in Flow Focusing: Measurements and Calculations
Håkansson, K. M. O., Lundell, F., Wittberg, L. P., & Söderberg, D. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b02972 · Cited by 41
Cheng, D., Wei, P., Zhang, L., & Cai, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02424 · Cited by 38
Preparing Bombyx mori Silk Nanofibers Using a Sustainable and Scalable Approach
Uddin, M. G., Batchelor, W. J., Allardyce, B. J., Byrne, N., Barrow, C. J., Wang, X., & Rajkhowa, R. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06138 · Cited by 40
Rheological behavior of high consistency enzymatically fibrillated cellulose suspensions
Jaiswal, A. K., Kumar, V., Khakalo, A., Lahtinen, P., Solin, K., Pere, J., & Toivakka, M. (2021) · Cellulose · doi:10.1007/s10570-021-03688-y · Cited by 44
Banvillet, G., Gatt, E., Belgacem, M. N., & Bras, J. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.124819 · Cited by 42
Biomedical engineering aspects of nanocellulose: a review
Rai, R., & Dhar, P. (2022) · Nanotechnology · doi:10.1088/1361-6528/ac6fef · Cited by 40
Processing and characterization of nanofibrillated cellulose/layered silicate systems
Ho, T. T. T., Ko, Y. S., Zimmermann, T., Geiger, T., & Caseri, W. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6291-8 · Cited by 41
Stiffness contribution of cellulose nanofibrils to composite materials
Josefsson, G., Berthold, F., & Gamstedt, E. K. (2013) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2013.11.018 · Cited by 41
“By chemomechanical treatment of wood fibers it is possible to liberate the fibrils into so called nanofibrillated cellulose (NFC) (Pääkkö et al., 2007).”
BackgroundMaestri, C. A., Abrami, M., Hazan, S., Chistè, E., Golan, Y., Rohrer, J., Bernkop‐Schnürch, A., Grassi, M., Scarpa, M., & Bettotti, P. (2017) · Scientific Reports · doi:10.1038/s41598-017-11649-4 · Cited by 44
Chao, F.-C., Wu, M., Chen, L.-C., Lin, H.-L., Liu, D.-Z., Ho, H., & Sheu, M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115507 · Cited by 38
Huang, J. T., Ma, X., Yang, G., & Dufresne, A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch1 · Cited by 42
Top-down fabrication of wood hydrogels: From preparation to application
Wang, Z., Zhang, X., Kong, X., & Yao, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151518 · Cited by 38
The Cellulose Nanofibers for Optoelectronic Conversion and Energy Storage
Luo, Y., Zhang, J., Li, X., Liao, C., & Li, X. (2014) · Journal of Nanomaterials · doi:10.1155/2014/654512 · Cited by 40
Photoswitchable nanocomposites made from coumarin-functionalized cellulose nanocrystals
Biyani, M. V., Weder, C., & Foster, E. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00486h · Cited by 44
Use of Chemically Modified Nanocelluloses in Flotation of Hematite and Quartz
Laitinen, O., Kemppainen, K., Ämmälä, A. Ä., Sirviö, J. A., Liimatainen, H., & Niinimäki, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503415t · Cited by 41
Biofilms from micro/nanocellulose of $$\hbox {NaBH}_{4}$$ NaBH 4 -modified kraft pulp
Tozluoğlu, A., Poyraz, B., Candan, Z., Yavuz, M., & Arslan, R. (2017) · Bulletin of Materials Science · doi:10.1007/s12034-017-1416-y · Cited by 39
Cheng, L., Zhang, D., Gu, Z., Li, Z., Hong, Y., & Li, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.056 · Cited by 40
Mechanically Robust Gels Formed from Hydrophobized Cellulose Nanocrystals
Nigmatullin, R., Harniman, R. L., Gabrielli, V., Muñoz-García, J. C., Khimyak, Y. Z., Angulo, J., & Eichhorn, S. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05067 · Cited by 37
Nanobiopolymers Fabrication and Their Life Cycle Assessments
Yang, N., Zhang, W., Ye, C., Chen, X., & Ling, S. (2018) · Biotechnology Journal · doi:10.1002/biot.201700754 · Cited by 39
Production and modification of nanofibrillated cellulose composites and potential applications
Islam, N., & Rahman, F. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102177-4.00006-9 · Cited by 49
Çınar, G., Larsson, P. A., Riazanova, A. V., Øvrebø, H. H., Wågberg, L., & Berglund, L. A. (2020) · Cellulose · doi:10.1007/s10570-020-03438-6 · Cited by 37
Self-citationEffects of hemicellulose composition and content on the interaction between cellulose nanofibers
Kumagai, A., & Endo, T. (2020) · Cellulose · doi:10.1007/s10570-020-03530-x · Cited by 37
Metadata
- Authors
- Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., & Lindström, T.
- Affiliations
- Trinity College Dublin (IE)
- Corresponding author
- Ikkala, O.
- Lindström, T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-03
- Volume
- 8
- Issue
- 6
- Pages
- 1934-1941
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2001245625
- Cited by
- 1,962
- References
- 23
- Citations by year
- 2026: 54 · 2025: 65 · 2024: 65 · 2023: 99 · 2022: 130 · 2021: 127 · 2020: 164 · 2019: 145 · 2018: 144 · 2017: 178 · 2016: 126 · 2015: 146 · 2014: 133 · 2013: 105 · 2012: 93
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- VINNOVA
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- microfibrillated cellulose, enzymatic hydrolysis, mechanical shearing, high-pressure homogenization, cellulose fibrillation, cellulose gels, storage modulus, cellulose reinforcement
- MeSH terms
- Cellulose, Gels, Hydrogen-Ion Concentration, Hydrolysis, Magnetic Resonance Spectroscopy, Rheology, Stress, Mechanical, Temperature, Viscosity, Wood, Microscopy, Atomic Force, Cryoelectron Microscopy, Microscopy, Electron, Transmission, Macromolecular Substances, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.