Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Toward exploiting the attractive mechanical properties of cellulose I nanoelements, a novel route is demonstrated, which combines enzymatic hydrolysis and mechanical shearing. Previously, an aggressive acid hydrolysis and sonication of cellulose I containing fibers was shown to lead to a network of weakly hydrogen-bonded rodlike cellulose elements typically with a low aspect ratio. On the other hand, high mechanical shearing resulted in longer and entangled nanoscale cellulose elements leading to stronger networks and gels. Nevertheless, a widespread use of the latter concept has been hindered because of lack of feasible methods of preparation, suggesting a combination of mild hydrolysis and shearing to disintegrate cellulose I containing fibers into high aspect ratio cellulose I nanoscale elements. In this work, mild enzymatic hydrolysis has been introduced and combined with mechanical shearing and a high-pressure homogenization, leading to a controlled fibrillation down to nanoscale and a network of long and highly entangled cellulose I elements. The resulting strong aqueous gels exhibit more than 5 orders of magnitude tunable storage modulus G' upon changing the concentration. Cryotransmission electron microscopy, atomic force microscopy, and cross-polarization/magic-angle spinning (CP/MAS) 13C NMR suggest that the cellulose I structural elements obtained are dominated by two fractions, one with lateral dimension of 5-6 nm and one with lateral dimensions of about 10-20 nm. The thicker diameter regions may act as the junction zones for the networks. The resulting material will herein be referred to as MFC (microfibrillated cellulose). Dynamical rheology showed that the aqueous suspensions behaved as gels in the whole investigated concentration range 0.125-5.9% w/w, G' ranging from 1.5 Pa to 105 Pa. The maximum G' was high, about 2 orders of magnitude larger than typically observed for the corresponding nonentangled low aspect ratio cellulose I gels, and G' scales with concentration with the power of approximately three. The described preparation method of MFC allows control over the final properties that opens novel applications in materials science, for example, as reinforcement in composites and as templates for surface modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to the more aggressive acid hydrolysis treatment, the enzymatic treatment yielded longer and highly entangled nanoscale fibrils.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Finally, the enzymatic step leads to reduced energy consumption allowing widespread use of the material”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“They demonstrated that the enzymatic hydrolysis step avoids blocking problems during the homogenization treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Xylanases are hydrolytic enzymes that modify the random amorphous compounds (hemicelluloses) present in the plant fiber.”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
In the citing paper
“They can also initiate the random hydrolysis of the b-1,4 non-reducing terminal regions located between the glycosidic linkages of the glucose units (Hubbe, Rojas, Lucia, & Sain, 2008;Pääkko et al., 2007).”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Numerical Recipes: The Art of Scientific Computing
Ziegel, E. (1987) · Technometrics · doi:10.1080/00401706.1987.10488304 · Cited by 6,702
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Native cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Dynamics of concentrated polymer systems. Part 3.—The constitutive equation
Doi, M., & Edwards, S. F. (1978) · J. Chem. Soc., Faraday Trans. 2 · doi:10.1039/f29787401818 · Cited by 615
Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy
Wickholm, K., Larsson, P. T., & Iversen, T. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(98)00236-5 · Cited by 423
Self-citationA CP/MAS13C NMR investigation of molecular ordering in celluloses
Larsson, P. T., Wickholm, K., & Iversen, T. (1997) · Carbohydrate Research · doi:10.1016/s0008-6215(97)00130-4 · Cited by 399
Self-citationChemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Research works printed but not linked: 28
- Hult E. L., 2001, Polymer, 42, 3314
- Hult E. L., 2002, Holzforschung, 56, 184
- Liu H., 2002, Part B: Polym. Phys
- Kim C.-W., 2006, Polymer, 47, 5107
- Fleming K., 2001, ChemEur. J., 7, 1835
- Lima M. M. D., 2004, Macromol. Rapid Commun., 25, 787
- Araki J., 1998, Physicochem. Eng. Aspects
- Turbak A. F., 1983, Appl. Polym. Symp.
- Herrick F. W., 1983, Appl. Polym. Symp.
- Nakagaito A. N., 2004, Process
- Berglund L. A., 2005, Natural Fibers, Biopolymers, and Biocomposites
- Nakagaito A. N., 2005, Process
- Nakagaito A. N., 2005, Process
- Henriksson M., 2007, Eur. Polym. J.
- Ono H., 2004, Polym. J., 36, 694
- Tatsumi D., 2002, J. Soc. Rheol., Jpn., 30, 32
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 61
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 73
- Lowys M.-P., 2001, Food Hydrocolloids, 15, 32
- Ono H., 1998, Cellulose, 5, 247
- Ono H., 2001, Trans. Mater. Res. Soc. Jpn., 26, 572
- Engström A.-C., 2006, Biomacromolecules, 7, 2031
- Hausalo T., 1999, Pulp and Paper Testing, 63
- Hiltunen E., 1999, Pulp and Paper Testing, 135
- Katz K., 1984, Sven. Papperstid., 87, R48
- Guenet J.-M., 2000, J. Rheol., 44, 960
- Sahimi M., 1998, Phys. Rep., 306, 395
- Soft Matter Physics, 1999, Springer-Verlag: Berlin
Cited by
Items 101–200 of 1,002
Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications
Li, M., Wu, Q., Moon, R. J., Hubbe, M. A., & Bortner, M. J. (2021) · Advanced Materials · doi:10.1002/adma.202006052 · Cited by 324
Inorganic Hollow Nanotube Aerogels by Atomic Layer Deposition onto Native Nanocellulose Templates
Korhonen, J. T., Hiekkataipale, P., Malm, J., Karppinen, M., Ikkala, O., & Ras, R. H. A. (2011) · ACS Nano · doi:10.1021/nn200108s · Cited by 326
Self-citationXie, H., Du, H., Yang, X., & Si, C. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7923068 · Cited by 328
3D network of cellulose-based energy storage devices and related emerging applications
Dutta, S., Kim, J., Ide, Y., Ho Kim, J., Hossain, M. S. A., Bando, Y., Yamauchi, Y., & Wu, K. C.-W. (2017) · Materials Horizons · doi:10.1039/c6mh00500d · Cited by 323
Cellulose Nanofibril Film as a Piezoelectric Sensor Material
Rajala, S., Siponkoski, T., Sarlin, E., Mettänen, M., Vuoriluoto, M., Pammo, A., Juuti, J., Rojas, O. J., Franssila, S., & Tuukkanen, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03597 · Cited by 320
Cellulose micro/nanofibres from eucalyptus kraft pulp: preparation and properties
Tonoli, G. H. D., Teixeira, E. M., Corrêa, A. C., Marconcini, J. M., Caixeta, L. A., Pereira-da-Silva, M. A., & Mattoso, L. H. C. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.02.052 · Cited by 315
A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches
Qing, Y., Sabo, R., Zhu, J. Y., Agarwal, U., Cai, Z., & Wu, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.086 · Cited by 311
Hoo, D. Y., Low, Z. L., Low, D. Y. S., Tang, S. Y., Manickam, S., Tan, K. W., & Ban, Z. H. (2022) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2022.106176 · Cited by 309
“the solid cellulose surface, which leads to a longer hydrolysis period that ranges from 24 h to 120 h, depending on the cellulose source and enzyme loading [181,199,200].”
BackgroundBenítez, A. J., & Walther, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02006f · Cited by 310
Zhao, S., Zhang, Z., Sèbe, G., Wu, R., Rivera Virtudazo, R. V., Tingaut, P., & Koebel, M. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404368 · Cited by 307
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Jin, H., Kettunen, M., Laiho, A., Pynnönen, H., Paltakari, J., Marmur, A., Ikkala, O., & Ras, R. H. A. (2011) · Langmuir · doi:10.1021/la103877r · Cited by 306
Self-citationColloidal Stability of Aqueous Nanofibrillated Cellulose Dispersions
Fall, A. B., Lindström, S. B., Sundman, O., Ödberg, L., & Wågberg, L. (2011) · Langmuir · doi:10.1021/la201947x · Cited by 307
Aerogels from nanofibrillated cellulose with tunable oleophobicity
Aulin, C., Netrval, J., Wågberg, L., & Lindström, T. (2010) · Soft Matter · doi:10.1039/c001939a · Cited by 306
Self-citationPreparation and characterization of water-redispersible nanofibrillated cellulose in powder form
Eyholzer, C., Bordeanu, N., Lopez-Suevos, F., Rentsch, D., Zimmermann, T., & Oksman, K. (2010) · Cellulose · doi:10.1007/s10570-009-9372-3 · Cited by 304
“The isolation of NFC from wood pulp has been achieved by applying mechanical treatment, using a high-pressure homogenizer (Turbak et al. 1983; Herrick et al. 1983; Wågberg et al. 1987; Pääkkö et al. 2007) or grinding with previous chemical treatment (Abe et al.”
MethodNanocellulose-stabilized Pickering emulsions and their applications
Fujisawa, S., Togawa, E., & Kuroda, K. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1401423 · Cited by 298
Wang, Q. Q., Zhu, J. Y., Gleisner, R., Kuster, T. A., Baxa, U., & McNeil, S. E. (2012) · Cellulose · doi:10.1007/s10570-012-9745-x · Cited by 302
Nanocellulose: Recent advances and its prospects in environmental remediation
Shak, K. P. Y., Pang, Y. L., & Mah, S. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.232 · Cited by 286
Rheological Studies of Microfibrillar Cellulose Water Dispersions
Iotti, M., Gregersen, Ø. W., Moe, S., & Lenes, M. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0248-2 · Cited by 293
Yi, T., Zhao, H., Mo, Q., Pan, D., Liu, Y., Huang, L., Xu, H., Hu, B., & Song, H. (2020) · Materials · doi:10.3390/ma13225062 · Cited by 287
“[46] used a combination of enzymatic hydrolysis and high pressure homogenization to prepare CNFs with a high aspect ratio and network structure.”
MethodRheology of nanocellulose-rich aqueous suspensions: A Review
Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017) · BioResources · doi:10.15376/biores.12.4.hubbe · Cited by 289
Current Progress in Rheology of Cellulose Nanofibril Suspensions
Nechyporchuk, O., Belgacem, M. N., & Pignon, F. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00668 · Cited by 288
De France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
Methods for Extraction of Nanocellulose from Various Sources
Kargarzadeh, H., Ioelovich, M., Ahmad, I., Thomas, S., & Dufresne, A. (2017) · Handbook of Nanocellulose and Cellulose Nanocomposites · doi:10.1002/9783527689972.ch1 · Cited by 244
Mihranyan, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32959 · Cited by 279
Walther, A., Timonen, J. V. I., Díez, I., Laukkanen, A., & Ikkala, O. (2011) · Advanced Materials · doi:10.1002/adma.201100580 · Cited by 279
Self-citationEnhancement of the fermentation process and properties of bacterial cellulose: a review
Campano, C., Balea, A., Blanco, A., & Negro, C. (2016) · Cellulose · doi:10.1007/s10570-015-0802-0 · Cited by 279
Environmental science and engineering applications of nanocellulose-based nanocomposites
Wei, H., Rodriguez, K., Renneckar, S., & Vikesland, P. J. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00059e · Cited by 277
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
A Nanocellulose Polypyrrole Composite Based on Microfibrillated Cellulose from Wood
Nyström, G., Mihranyan, A., Razaq, A., Lindström, T., Nyholm, L., & Strømme, M. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp911272m · Cited by 278
Self-citationCurrent status and future prospects of nanotechnology in cosmetics
Mihranyan, A., Ferraz, N., & Strømme, M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.10.001 · Cited by 268
Wang, M., Anoshkin, I. V., Nasibulin, A. G., Korhonen, J. T., Seitsonen, J., Pere, J., Kauppinen, E. I., Ras, R. H. A., & Ikkala, O. (2013) · Advanced Materials · doi:10.1002/adma.201300256 · Cited by 270
Self-citationNanocellulose for Sustainable Water Purification
Das, R., Lindström, T., Sharma, P. R., Chi, K., & Hsiao, B. S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00683 · Cited by 261
Self-citationTingaut, P., Zimmermann, T., & Sèbe, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32956e · Cited by 266
Supramolecular Structure Characterization of Molecularly Thin Cellulose I Nanoparticles
Li, Q., & Renneckar, S. (2011) · Biomacromolecules · doi:10.1021/bm101315y · Cited by 267
Nanocellulose Life Cycle Assessment
Li, Q., McGinnis, S., Sydnor, C., Wong, A., & Renneckar, S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc4000225 · Cited by 262
Aulin, C., Salazar-Alvarez, G., & Lindström, T. (2012) · Nanoscale · doi:10.1039/c2nr31726e · Cited by 260
Self-citationPhotoswitchable Superabsorbency Based on Nanocellulose Aerogels
Kettunen, M., Silvennoinen, R. J., Houbenov, N., Nykänen, A., Ruokolainen, J., Sainio, J., Pore, V., Kemell, M., Ankerfors, M., Lindström, T., et al. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001431 · Cited by 259
Self-citationProcessing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Nanofibrillation of Wood Pulp Using a High-Speed Blender
Uetani, K., & Yano, H. (2011) · Biomacromolecules · doi:10.1021/bm101103p · Cited by 258
Brodin, F. W., Gregersen, Ø. W., & Syverud, K. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p156-166 · Cited by 256
“These features make CNF bind a substantial amount of water to its surface and form gels at low concentrations and, consequently, the viscosity is increased when CNF is added to a suspension (Turbak et al. 1983; Herrick et al. 1983; Pääkkö et al. 2007).”
BackgroundPrakash Menon, M., Selvakumar, R., Suresh kumar, P., & Ramakrishna, S. (2017) · RSC Advances · doi:10.1039/c7ra06713e · Cited by 252
Functional nanocomposites from sustainable regenerated cellulose aerogels: A review
Wan, C., Jiao, Y., Wei, S., Zhang, L., Wu, Y., & Li, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.115 · Cited by 256
Rees, A., Powell, L. C., Chinga-Carrasco, G., Gethin, D. T., Syverud, K., Hill, K. E., & Thomas, D. W. (2015) · BioMed Research International · doi:10.1155/2015/925757 · Cited by 253
Rheological characterization of microfibrillated cellulose suspensions after freezing
Agoda-Tandjawa, G., Durand, S., Berot, S., Blassel, C., Gaillard, C., Garnier, C., & Doublier, J.-L. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.045 · Cited by 252
“The present results are compared to the ones reported by Pääkkö et al. (2007).”
BackgroundMethodResultInfluentialGaremark, J., Yang, X., Sheng, X., Cheung, O., Sun, L., Berglund, L. A., & Li, Y. (2020) · ACS Nano · doi:10.1021/acsnano.0c01888 · Cited by 256
Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials
Österberg, M., Henn, K. A., Farooq, M., & Valle-Delgado, J. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00492 · Cited by 238
Self-citationIsogai, A., & Zhou, Y. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.01.001 · Cited by 253
Nanofibrillar cellulose films for controlled drug delivery
Kolakovic, R., Peltonen, L., Laukkanen, A., Hirvonen, J., & Laaksonen, T. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.06.011 · Cited by 249
Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State
Yang, X., Reid, M. S., Olsén, P., & Berglund, L. A. (2020) · ACS Nano · doi:10.1021/acsnano.9b07659 · Cited by 249
Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications
Xu, W., Wang, X., Sandler, N., Willför, S., & Xu, C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03924 · Cited by 248
Polyethylenimine-Grafted Cellulose Nanofibril Aerogels as Versatile Vehicles for Drug Delivery
Zhao, J., Lu, C., He, X., Zhang, X., Zhang, W., & Zhang, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507601m · Cited by 248
Transitional properties of starch colloid with particle size reduction from micro- to nanometer
Liu, D., Wu, Q., Chen, H., & Chang, P. R. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.07.035 · Cited by 249
Functionality and nutritional aspects of microcrystalline cellulose in food
Nsor-Atindana, J., Chen, M., Goff, H. D., Zhong, F., Sharif, H. R., & Li, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.021 · Cited by 243
Charreau, H., L. Foresti, M., & Vazquez, A. (2013) · Recent Patents on Nanotechnology · doi:10.2174/187221013804484854 · Cited by 238
Qasim, U., Osman, A. I., Al-Muhtaseb, A. H., Farrell, C., Al-Abri, M., Ali, M., Vo, D.-V. N., Jamil, F., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01090-x · Cited by 235
Arvidsson, R., Nguyen, D., & Svanström, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00888 · Cited by 241
The Potential of NanoCellulose in the Packaging Field: A Review
Li, F., Mascheroni, E., & Piergiovanni, L. (2015) · Packaging Technology and Science · doi:10.1002/pts.2121 · Cited by 243
“To overcome such problems, cellulose materials are generally run in multiples passes through the mechanical treatment and several variants and technological supports have been proposed in the last 30 years.(27,67,97,98) An attempt of summarizing the main routes available in mechanical treatments of cellulose materials…”
BackgroundBarhoum, A., Jeevanandam, J., Rastogi, A., Samyn, P., Boluk, Y., Dufresne, A., Danquah, M. K., & Bechelany, M. (2020) · Nanoscale · doi:10.1039/d0nr04795c · Cited by 234
Cellulose as a nanostructured polymer: A short review
Ioelovich, M. (2008) · BioResources · doi:10.15376/biores.3.4.1403-1418 · Cited by 242
Cytotoxicity tests of cellulose nanofibril-based structures
Alexandrescu, L., Syverud, K., Gatti, A., & Chinga-Carrasco, G. (2013) · Cellulose · doi:10.1007/s10570-013-9948-9 · Cited by 240
“Research on the MFC material has gained renewed interest after it was shown that it is possible to produce MFC with relatively low energy consumption, based on various pathways that facilitate the fibrillation (Saito et al. 2006; Pääkkö et al. 2007; Heijnes-Son-Hultén 2007; Zimmermann et al. 2010).”
BackgroundCervin, N. T., Andersson, L., Ng, J. B. S., Olin, P., Bergström, L., & Wågberg, L. (2013) · Biomacromolecules · doi:10.1021/bm301755u · Cited by 241
Preparation and characterization of cellulose nanofibers from de-pectinated sugar beet pulp
Li, M., Wang, L.-J., Li, D., Cheng, Y.-L., & Adhikari, B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.021 · Cited by 234
Zhu, J. Y., Sabo, R., & Luo, X. (2011) · Green Chemistry · doi:10.1039/c1gc15103g · Cited by 243
Ahola, S., Österberg, M., & Laine, J. (2008) · Cellulose · doi:10.1007/s10570-007-9167-3 · Cited by 239
Self-citationKhawas, P., & Deka, S. C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.11.020 · Cited by 238
Xie, J., Hse, C.-Y., De Hoop, C. F., Hu, T., Qi, J., & Shupe, T. F. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.011 · Cited by 234
Ultralight and highly flexible aerogels with long cellulose I nanofibers
Chen, W., Yu, H., Li, Q., Liu, Y., & Li, J. (2011) · Soft Matter · doi:10.1039/c1sm06179h · Cited by 238
Model Films from Native Cellulose Nanofibrils. Preparation, Swelling, and Surface Interactions
Ahola, S., Salmi, J., Johansson, L.-S., Laine, J., & Österberg, M. (2008) · Biomacromolecules · doi:10.1021/bm701317k · Cited by 236
Self-citationSustainable cellulose and its derivatives for promising biomedical applications
Cheng, W., Zhu, Y., Jiang, G., Cao, K., Zeng, S., Chen, W., Zhao, D., & Yu, H. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101152 · Cited by 232
Nanocellulose in Emulsions and Heterogeneous Water‐Based Polymer Systems: A Review
Kedzior, S. A., Gabriel, V. A., Dubé, M. A., & Cranston, E. D. (2021) · Advanced Materials · doi:10.1002/adma.202002404 · Cited by 230
Lytic polysaccharide monooxygenases disrupt the cellulose fibers structure
Villares, A., Moreau, C., Bennati-Granier, C., Garajova, S., Foucat, L., Falourd, X., Saake, B., Berrin, J.-G., & Cathala, B. (2017) · Scientific Reports · doi:10.1038/srep40262 · Cited by 236
“This behavior was similar to endoglucanase treatments 30,31 , or the TEMPO oxidation 32 , which apparently do not significantly modify the fiber morphology.”
Ferreira, F., Pinheiro, I., de Souza, S., Mei, L., & Lona, L. (2019) · Journal of Composites Science · doi:10.3390/jcs3020051 · Cited by 231
“Other methods combine enzymatic hydrolysis with mechanical shearing [90].”
MethodAdvanced Flexible Materials from Nanocellulose
Chen, Z., Hu, Y., Shi, G., Zhuo, H., Ali, M. A., Jamróz, E., Zhang, H., Zhong, L., & Peng, X. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214245 · Cited by 229
Torres‐Rendon, J. G., Femmer, T., De Laporte, L., Tigges, T., Rahimi, K., Gremse, F., Zafarnia, S., Lederle, W., Ifuku, S., Wessling, M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405873 · Cited by 226
Ferreira, F. V., Otoni, C. G., De France, K. J., Barud, H. S., Lona, L. M. F., Cranston, E. D., & Rojas, O. J. (2020) · Materials Today · doi:10.1016/j.mattod.2020.03.003 · Cited by 222
Cellulose nanocomposites by supramolecular chemistry engineering
Chen, L., Yu, L., Qi, L., Eichhorn, S. J., Isogai, A., Lizundia, E., Zhu, J. Y., & Chen, C. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00810-5 · Cited by 196
Effective Young’s Modulus of Bacterial and Microfibrillated Cellulose Fibrils in Fibrous Networks
Tanpichai, S., Quero, F., Nogi, M., Yano, H., Young, R. J., Lindström, T., Sampson, W. W., & Eichhorn, S. J. (2012) · Biomacromolecules · doi:10.1021/bm300042t · Cited by 221
Self-citationCrystalline Nanocellulose — Preparation, Modification, and Properties
Börjesson, M., & Westman, G. (2015) · Cellulose - Fundamental Aspects and Current Trends · doi:10.5772/61899 · Cited by 216
Morphological, chemical and thermal analysis of cellulose nanocrystals extracted from bamboo fibre
Rasheed, M., Jawaid, M., Parveez, B., Zuriyati, A., & Khan, A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.170 · Cited by 210
Winuprasith, T., & Suphantharika, M. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.07.027 · Cited by 216
Winuprasith, T., & Suphantharika, M. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.01.023 · Cited by 217
Emulsion Formation and Stabilization by Biomolecules: The Leading Role of Cellulose
Costa, C., Medronho, B., Filipe, A., Mira, I., Lindman, B., Edlund, H., & Norgren, M. (2019) · Polymers · doi:10.3390/polym11101570 · Cited by 209
“On the other hand, the more entangled network of MFC gradually broke, and at a sufficiently high shear rate, the suspension flowed as individual flocs and its viscosity remained high, thus reducing the efficiency of the emulsification process [85,86].”
BackgroundBesbes, I., Vilar, M. R., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.015 · Cited by 215
Preparation of millimeter-long cellulose I nanofibers with diameters of 30–80nm from bamboo fibers
Chen, W., Yu, H., & Liu, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.061 · Cited by 211
Reduced water vapour sorption in cellulose nanocomposites with starch matrix
Svagan, A. J., Hedenqvist, M. S., & Berglund, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.016 · Cited by 212
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
Mechanics Design in Cellulose‐Enabled High‐Performance Functional Materials
Ray, U., Zhu, S., Pang, Z., & Li, T. (2021) · Advanced Materials · doi:10.1002/adma.202002504 · Cited by 204
Daicho, K., Saito, T., Fujisawa, S., & Isogai, A. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b01438 · Cited by 213
Nanocellulose‐Enabled Membranes for Water Purification: Perspectives
Sharma, P. R., Sharma, S. K., Lindström, T., & Hsiao, B. S. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900114 · Cited by 210
Self-citationLou, Y.-R., Kanninen, L., Kuisma, T., Niklander, J., Noon, L. A., Burks, D., Urtti, A., & Yliperttula, M. (2014) · Stem Cells and Development · doi:10.1089/scd.2013.0314 · Cited by 211
Tang, Y., Shen, X., Zhang, J., Guo, D., Kong, F., & Zhang, N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.02.063 · Cited by 209
Fritsch, C., Staebler, A., Happel, A., Cubero Márquez, M., Aguiló-Aguayo, I., Abadias, M., Gallur, M., Cigognini, I., Montanari, A., López, M., et al. (2017) · Sustainability · doi:10.3390/su9081492 · Cited by 209
Martelli-Tosi, M., Masson, M. M., Silva, N. C., Esposto, B. S., Barros, T. T., Assis, O. B. G., & Tapia-Blácido, D. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.053 · Cited by 212
Rebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
“These problems are associated with: (i) clogging of the homogenizer, when the pulp is pumped through high pressure/homogenizers, (ii) excessive energy consumption [109,113] unless the pulp is subjected to: acid hydrolysis prior to refining [114], oxidation by TEMPO, chemical purifications [115], enzymatic pretreatment…”
BackgroundInfluentialNanocellulose Production: Exploring the Enzymatic Route and Residues of Pulp and Paper Industry
Michelin, M., Gomes, D. G., Romaní, A., Polizeli, M. D. L. T. M., & Teixeira, J. A. (2020) · Molecules · doi:10.3390/molecules25153411 · Cited by 205
“[63] already reported the utilization of a pH of 7.”
BackgroundInfluentialLu, H., Gui, Y., Zheng, L., & Liu, X. (2013) · Food Research International · doi:10.1016/j.foodres.2012.10.013 · Cited by 206
Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review
Moohan, J., Stewart, S. A., Espinosa, E., Rosal, A., Rodríguez, A., Larrañeta, E., Donnelly, R. F., & Domínguez-Robles, J. (2019) · Applied Sciences · doi:10.3390/app10010065 · Cited by 198
“In order to reduce energy consumption and make disintegration more efficient, different pretreatments, such as enzymatic hydrolysis [14], partial carboxymethylation [15], catalytic oxidation using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) [16], and mechanical refining [17] were employed.”
MethodNanocellulose in green food packaging
Vilarinho, F., Sanches Silva, A., Vaz, M. F., & Farinha, J. P. (2018) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2016.1270254 · Cited by 203
“For example, in order to facilitate disintegration of the cellulosic fibers, enzymatic pre-treatments followed by mechanical treatments may be applied (P€a€akk€o et al., 2007).”
BackgroundMethod
Metadata
- Authors
- Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., & Lindström, T.
- Affiliations
- Trinity College Dublin (IE)
- Corresponding author
- Ikkala, O.
- Lindström, T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-03
- Volume
- 8
- Issue
- 6
- Pages
- 1934-1941
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2001245625
- Cited by
- 1,962
- References
- 23
- Citations by year
- 2026: 54 · 2025: 65 · 2024: 65 · 2023: 99 · 2022: 130 · 2021: 127 · 2020: 164 · 2019: 145 · 2018: 144 · 2017: 178 · 2016: 126 · 2015: 146 · 2014: 133 · 2013: 105 · 2012: 93
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- VINNOVA
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- microfibrillated cellulose, enzymatic hydrolysis, mechanical shearing, high-pressure homogenization, cellulose fibrillation, cellulose gels, storage modulus, cellulose reinforcement
- MeSH terms
- Cellulose, Gels, Hydrogen-Ion Concentration, Hydrolysis, Magnetic Resonance Spectroscopy, Rheology, Stress, Mechanical, Temperature, Viscosity, Wood, Microscopy, Atomic Force, Cryoelectron Microscopy, Microscopy, Electron, Transmission, Macromolecular Substances, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.