Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Toward exploiting the attractive mechanical properties of cellulose I nanoelements, a novel route is demonstrated, which combines enzymatic hydrolysis and mechanical shearing. Previously, an aggressive acid hydrolysis and sonication of cellulose I containing fibers was shown to lead to a network of weakly hydrogen-bonded rodlike cellulose elements typically with a low aspect ratio. On the other hand, high mechanical shearing resulted in longer and entangled nanoscale cellulose elements leading to stronger networks and gels. Nevertheless, a widespread use of the latter concept has been hindered because of lack of feasible methods of preparation, suggesting a combination of mild hydrolysis and shearing to disintegrate cellulose I containing fibers into high aspect ratio cellulose I nanoscale elements. In this work, mild enzymatic hydrolysis has been introduced and combined with mechanical shearing and a high-pressure homogenization, leading to a controlled fibrillation down to nanoscale and a network of long and highly entangled cellulose I elements. The resulting strong aqueous gels exhibit more than 5 orders of magnitude tunable storage modulus G' upon changing the concentration. Cryotransmission electron microscopy, atomic force microscopy, and cross-polarization/magic-angle spinning (CP/MAS) 13C NMR suggest that the cellulose I structural elements obtained are dominated by two fractions, one with lateral dimension of 5-6 nm and one with lateral dimensions of about 10-20 nm. The thicker diameter regions may act as the junction zones for the networks. The resulting material will herein be referred to as MFC (microfibrillated cellulose). Dynamical rheology showed that the aqueous suspensions behaved as gels in the whole investigated concentration range 0.125-5.9% w/w, G' ranging from 1.5 Pa to 105 Pa. The maximum G' was high, about 2 orders of magnitude larger than typically observed for the corresponding nonentangled low aspect ratio cellulose I gels, and G' scales with concentration with the power of approximately three. The described preparation method of MFC allows control over the final properties that opens novel applications in materials science, for example, as reinforcement in composites and as templates for surface modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to the more aggressive acid hydrolysis treatment, the enzymatic treatment yielded longer and highly entangled nanoscale fibrils.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Finally, the enzymatic step leads to reduced energy consumption allowing widespread use of the material”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“They demonstrated that the enzymatic hydrolysis step avoids blocking problems during the homogenization treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Xylanases are hydrolytic enzymes that modify the random amorphous compounds (hemicelluloses) present in the plant fiber.”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
In the citing paper
“They can also initiate the random hydrolysis of the b-1,4 non-reducing terminal regions located between the glycosidic linkages of the glucose units (Hubbe, Rojas, Lucia, & Sain, 2008;Pääkko et al., 2007).”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Numerical Recipes: The Art of Scientific Computing
Ziegel, E. (1987) · Technometrics · doi:10.1080/00401706.1987.10488304 · Cited by 6,702
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Native cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Dynamics of concentrated polymer systems. Part 3.—The constitutive equation
Doi, M., & Edwards, S. F. (1978) · J. Chem. Soc., Faraday Trans. 2 · doi:10.1039/f29787401818 · Cited by 615
Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy
Wickholm, K., Larsson, P. T., & Iversen, T. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(98)00236-5 · Cited by 423
Self-citationA CP/MAS13C NMR investigation of molecular ordering in celluloses
Larsson, P. T., Wickholm, K., & Iversen, T. (1997) · Carbohydrate Research · doi:10.1016/s0008-6215(97)00130-4 · Cited by 399
Self-citationChemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Research works printed but not linked: 28
- Hult E. L., 2001, Polymer, 42, 3314
- Hult E. L., 2002, Holzforschung, 56, 184
- Liu H., 2002, Part B: Polym. Phys
- Kim C.-W., 2006, Polymer, 47, 5107
- Fleming K., 2001, ChemEur. J., 7, 1835
- Lima M. M. D., 2004, Macromol. Rapid Commun., 25, 787
- Araki J., 1998, Physicochem. Eng. Aspects
- Turbak A. F., 1983, Appl. Polym. Symp.
- Herrick F. W., 1983, Appl. Polym. Symp.
- Nakagaito A. N., 2004, Process
- Berglund L. A., 2005, Natural Fibers, Biopolymers, and Biocomposites
- Nakagaito A. N., 2005, Process
- Nakagaito A. N., 2005, Process
- Henriksson M., 2007, Eur. Polym. J.
- Ono H., 2004, Polym. J., 36, 694
- Tatsumi D., 2002, J. Soc. Rheol., Jpn., 30, 32
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 61
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 73
- Lowys M.-P., 2001, Food Hydrocolloids, 15, 32
- Ono H., 1998, Cellulose, 5, 247
- Ono H., 2001, Trans. Mater. Res. Soc. Jpn., 26, 572
- Engström A.-C., 2006, Biomacromolecules, 7, 2031
- Hausalo T., 1999, Pulp and Paper Testing, 63
- Hiltunen E., 1999, Pulp and Paper Testing, 135
- Katz K., 1984, Sven. Papperstid., 87, R48
- Guenet J.-M., 2000, J. Rheol., 44, 960
- Sahimi M., 1998, Phys. Rep., 306, 395
- Soft Matter Physics, 1999, Springer-Verlag: Berlin
Cited by
Items 301–400 of 1,002
Siqueira, P., Siqueira, É. J., Lima, A. E. D., Siqueira, G. D. F., Pinzón-García, A. D., Lopes, A. P., Cortés, M. E., Isaac, A. C., Pereira, F. V., & Botaro, V. R. (2019) · Nanomaterials · doi:10.3390/nano9010078 · Cited by 153
“This crystalline structure corresponds to two parallel glycosidic chains, which have been referred to as the cellulose polymorph of greater mechanical strength [43].”
BackgroundManufacturing of Food Packaging Based on Nanocellulose: Current Advances and Challenges
Fotie, G., Limbo, S., & Piergiovanni, L. (2020) · Nanomaterials · doi:10.3390/nano10091726 · Cited by 156
Spray-Dried Cellulose Nanofibers as Novel Tablet Excipient
Kolakovic, R., Peltonen, L., Laaksonen, T., Putkisto, K., Laukkanen, A., & Hirvonen, J. J. (2011) · AAPS PharmSciTech · doi:10.1208/s12249-011-9705-z · Cited by 156
Malho, J., Laaksonen, P. H., Walther, A., Ikkala, O. T., & Linder, M. B. (2012) · Biomacromolecules · doi:10.1021/bm2018189 · Cited by 151
Self-citationConversion Economics of Forest Biomaterials: Risk and Financial Analysis of CNC Manufacturing
de Assis, C. A., Houtman, C. J., Phillips, R., Bilek, E. M., Rojas, O. J., Pal, L., Peresin, M. S., Jameel, H., & González, R. (2017) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1782 · Cited by 154
Chinga‐Carrasco, G. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00053 · Cited by 142
Preparation of Nanocellulose: A Review
Islam, M. T., Alam, M. M., Patrucco, A., Montarsolo, A., & Zoccola, M. (2014) · AATCC Journal of Research · doi:10.14504/ajr.1.5.3 · Cited by 161
Nasir, M., Hashim, R., Sulaiman, O., & Asim, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00011-5 · Cited by 158
Influence of cellulose nanofibrils on the structural elements of ice cream
Velásquez-Cock, J. A., Serpa, A., Acosta, L. M. V., Gañán, P. F., Hoyos, C. G., Castro, C. I., Duizer, L. M., Goff, H. D., & Zuluaga, R. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.07.035 · Cited by 139
On the toxicity of cellulose nanocrystals and nanofibrils in animal and cellular models
Ventura, C., Pinto, F., Lourenço, A. F., Ferreira, P. J., Louro, H., & Silva, M. J. (2020) · Cellulose · doi:10.1007/s10570-020-03176-9 · Cited by 141
Lu, Y., Sun, Q., Yang, D., She, X., Yao, X., Zhu, G., Li, P., Zhao, H., & Li, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31310c · Cited by 137
Interactions of structurally different hemicelluloses with nanofibrillar cellulose
Eronen, P., Österberg, M., Heikkinen, S. L., Tenkanen, M., & Laine, J. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.031 · Cited by 144
“The dvantages of these extra small fibrils include their flexibility and igh aspect ratio (Pääkkö et al., 2007).”
BackgroundSelf-citationde Campos, A., Corrêa, A. C., Cannella, D., Teixeira, E. D. M., Marconcini, J. M., Dufresne, A., Mattoso, L. H. C., Cassland, P., & Sanadi, A. R. (2013) · Cellulose · doi:10.1007/s10570-013-9909-3 · Cited by 149
“Most methods that use enzymes to perform the hydrolysis, contain predominantly endoglucanase and/or exoglucanase (Henriksson et al. 2007, 2008; Paakko et al. 2007; Filson et al. 2009; Siqueira et al. 2010).”
Nanocellulose: A mini-review on types and use in drug delivery systems
Raghav, N., Sharma, M. R., & Kennedy, J. F. (2020) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2020.100031 · Cited by 161
Sulaiman, S., Mokhtar, M. N., Naim, M. N., Baharuddin, A. S., & Sulaiman, A. (2014) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-014-1417-x · Cited by 146
Delgado‐Aguilar, M., González, I., Tarrés, Q., Pèlach, M. À., Alcalà, M., & Mutjé, P. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.010 · Cited by 141
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 132
Necessity of enzymatic hydrolysis for production and functionalization of nanocelluloses
Karim, Z., Afrin, S., Husain, Q., & Danish, R. (2016) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2016.1163322 · Cited by 141
Rol, F., Karakashov, B., Nechyporchuk, O., Terrien, M., Meyer, V., Dufresne, A., Belgacem, M. N., & Bras, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00630 · Cited by 142
Nanocellulose as sustainable biomaterials for drug delivery
Das, S., Ghosh, B., & Sarkar, K. (2021) · Sensors International · doi:10.1016/j.sintl.2021.100135 · Cited by 144
Surface cationized cellulose nanofibrils for the production of contact active antimicrobial surfaces
Saini, S., Falco, Ç. Y., Belgacem, M. N., & Bras, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.002 · Cited by 144
Thermal conductivity analysis and applications of nanocellulose materials
Uetani, K., & Hatori, K. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1390692 · Cited by 140
Serrà, A., González, I., Oliver-Ortega, H., Tarrés, Q., Delgado‐Aguilar, M., & Mutjé, P. (2017) · Polymers · doi:10.3390/polym9110557 · Cited by 143
Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose
Butchosa, N., & Zhou, Q. (2014) · Cellulose · doi:10.1007/s10570-014-0452-7 · Cited by 139
Cellulose nanofibrils: a rapid adsorbent for the removal of methylene blue
Chan, C. H., Chia, C. H., Zakaria, S., Sajab, M. S., & Chin, S. X. (2015) · RSC Advances · doi:10.1039/c4ra15754k · Cited by 133
A mechanochemical approach to manufacturing bamboo cellulose nanocrystals
Lu, Q., Lin, W., Tang, L., Wang, S., Chen, X., & Huang, B. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8620-6 · Cited by 149
“This structure was performed by repeating b-(1 ? 4)-D-glucopyranose units, building blocks of parallel glucan chains [29].”
BackgroundHuang, Y., Yao, M., Zheng, X., Liang, X., Su, X., Zhang, Y. X., Lu, A., & Zhang, L. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00928 · Cited by 130
Wang, R., Chen, L., Zhu, J. Y., & Yang, R. (2017) · ChemNanoMat · doi:10.1002/cnma.201700015 · Cited by 132
Zhou, T., Cheng, X., Pan, Y., Li, C., & Gong, L. (2018) · Cellulose · doi:10.1007/s10570-018-2179-3 · Cited by 133
Patents involving nanocellulose: Analysis of their evolution since 2010
Charreau, H., Cavallo, E., & Foresti, M. L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116039 · Cited by 138
Preparation and Characterization of Cellulose Regenerated from Phosphoric Acid
Jia, X., Chen, Y., Shi, C., Ye, Y., Wang, P., Zeng, X., & Wu, T. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf4042358 · Cited by 129
Fiorati, A., Bellingeri, A., Punta, C., Corsi, I., & Venditti, I. (2020) · Polymers · doi:10.3390/polym12081635 · Cited by 132
Yadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Marakana, P. G., Dey, A., & Saini, B. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106606 · Cited by 138
Espinosa, E., Tarrés, Q., Delgado‐Aguilar, M., González, I., Mutjé, P., & Rodríguez, A. (2015) · Cellulose · doi:10.1007/s10570-015-0807-8 · Cited by 139
“2014) or enzymatic (Janardhnan and Sain 2006; Pääkkö et al. 2007; Henriksson et al. 2007) pre-treatments are applied to cellulose fibres in order to facilitate the mechanical treatment step and reduce energy consumption.”
MethodProcessable polyaniline suspensions through in situ polymerization onto nanocellulose
Luong, N. D., Korhonen, J. T., Soininen, A. J., Ruokolainen, J., Johansson, L., & Seppälä, J. V. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.10.026 · Cited by 133
Self-citationCellulose nanofibers as excipient for the delivery of poorly soluble drugs
Löbmann, K., & Svagan, A. J. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.064 · Cited by 135
Nanomaterials Derived from Fungal Sources─Is It the New Hype?
Nawawi, W. M. F. W., Jones, M. P., Murphy, R., Lee, K., Kontturi, E., & Bismarck, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01141 · Cited by 139
Aulin, C., & Ström, G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301785a · Cited by 138
Yang, X., & Berglund, L. A. (2020) · Advanced Materials · doi:10.1002/adma.202001118 · Cited by 135
Saarikoski, E., Saarinen, T., Salmela, J., & Seppälä, J. V. (2012) · Cellulose · doi:10.1007/s10570-012-9661-0 · Cited by 148
Modification of Cellulose Nanofibrils with Luminescent Carbon Dots
Junka, K., Guo, J., Filpponen, I., Laine, J., & Rojas, O. J. (2014) · Biomacromolecules · doi:10.1021/bm4017176 · Cited by 126
Self-citationOrasugh, J. T., Saha, N. R., Rana, D. K., Sarkar, G., Mollick, M. M. R., Chattopadhyay, A. K., Mitra, B. C., Mondal, D., Ghosh, S. K., & Chattopadhyay, D. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.12.069 · Cited by 128
Zhao, G., Du, J., Chen, W., Pan, M., & Chen, D. (2019) · Cellulose · doi:10.1007/s10570-019-02683-8 · Cited by 130
Corsi, I., Venditti, I., Trotta, F., & Punta, C. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.161181 · Cited by 140
The role of hemicellulose in nanofibrillated cellulose networks
Arola, S., Malho, J., Laaksonen, P. H., Lille, M. E., & Linder, M. B. (2013) · Soft Matter · doi:10.1039/c2sm26932e · Cited by 143
Superior Flame-Resistant Cellulose Nanofibril Aerogels Modified with Hybrid Layer-by-Layer Coatings
Köklükaya, O., Carosio, F., & Wågberg, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08018 · Cited by 126
Heggset, E. B., Strand, B. L., Sundby, K. W., Simon, S., Chinga‐Carrasco, G., & Syverud, K. (2018) · Cellulose · doi:10.1007/s10570-018-2142-3 · Cited by 127
Biopolymer Nanoscale Assemblies as Building Blocks for New Materials: A Review
Pei, Y., Wang, L., Tang, K., & Kaplan, D. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008552 · Cited by 126
TEMPO-Oxidized Cellulose Nanofibrils Dispersed in Organic Solvents
Okita, Y., Fujisawa, S., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm101255x · Cited by 141
Dilamian, M., & Noroozi, B. (2019) · Cellulose · doi:10.1007/s10570-019-02469-y · Cited by 135
Petroudy, S. R. D., Syverud, K., Chinga‐Carrasco, G., Ghasemain, A., & Resalati, H. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.073 · Cited by 126
Yarbrough, J. M., Zhang, R., Mittal, A., Wall, T. V., Bomble, Y. J., Decker, S. R., Himmel, M. E., & Ciesielski, P. N. (2017) · ACS Nano · doi:10.1021/acsnano.7b00086 · Cited by 130
“and Pääkkö et al.(28) published investigations wherein”
Jun, D., Zhao, G., Mingzhu, P., Leilei, Z., Li, D., & Zhang, R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.03.076 · Cited by 125
“CNFs are produced from mechanical shearing, enzymatic hydrolysis and oxidation, etc (Paakko et al., 2007; Jiang et al, 2013; Xu et al., 2013).”
BackgroundHo, T. T. T., Zimmermann, T., Ohr, S., & Caseri, W. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3011737 · Cited by 125
Isolation and characterization of lignocellulose nanofibers from different wheat straw pulps
Sánchez, R., Espinosa, E., Domínguez‐Robles, J., Loaiza, J. M., & Rodríguez, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.019 · Cited by 126
Cellulose nanofibers produced from banana peel by enzymatic treatment: Study of process conditions
Tibolla, H., Pelissari, F. M., Rodrigues, M. I., & Menegalli, F. C. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.035 · Cited by 133
Ni, Y., Li, J., & Fan, L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.263 · Cited by 121
Wang, W., Mozuch, M. D., Sabo, R. C., Kersten, P. J., Zhu, J. Y., & Jin, Y. (2014) · Cellulose · doi:10.1007/s10570-014-0465-2 · Cited by 130
“4), suggesting increased hydrogen bonding between water and accessible hydroxyl groups resulting from fibrillation (Pääkko et al. 2007).”
InfluentialWater Redispersible Dried Nanofibrillated Cellulose by Adding Sodium Chloride
Missoum, K., Bras, J., & Belgacem, M. N. (2012) · Biomacromolecules · doi:10.1021/bm301378n · Cited by 131
Rheology of cellulose nanofibrils in the presence of surfactants
Quennouz, N., Hashmi, S. M., Choi, H. S., Kim, J. W., & Osuji, C. O. (2016) · Soft Matter · doi:10.1039/c5sm01803j · Cited by 128
Dimic-Misic, K., Gane, P. A. C., & Paltakari, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4028878 · Cited by 133
Lupin hull cellulose nanofiber aerogel preparation by supercritical CO2 and freeze drying
Ciftci, D., Ubeyitogullari, A., Huerta, R. R., Ciftci, O. N., Flores, R. A., & Saldaña, M. D. A. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2017.04.002 · Cited by 119
Effect of high residual lignin on the properties of cellulose nanofibrils/films
Chen, Y., Fan, D., Han, Y., Lyu, S., Lu, Y., Li, G., Jiang, F., & Wang, S. (2018) · Cellulose · doi:10.1007/s10570-018-2006-x · Cited by 124
“Recently, the large-scale production of CNFs has been achieved mainly by combining with enzymatic hydrolysis (Pääkkö et al. 2007) or chemical (Saito”
MethodBras, D. L., Strømme, M., & Mihranyan, A. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b00715 · Cited by 116
Reduction of water wettability of nanofibrillated cellulose by adsorption of cationic surfactants
Xhanari, K., Syverud, K., Chinga‐Carrasco, G., Paso, K. G., & Stenius, P. J. (2010) · Cellulose · doi:10.1007/s10570-010-9482-y · Cited by 140
“using techniques such as pretreatment by enzymatic hydrolysis combined with mechanical shearing and high pressure homogenization (Pääkkö et al. 2007) or acid hydrolysis combined with mechanical shearing (Henriksson et al.”
MethodNanocellulose Production in Future Biorefineries: An Integrated Approach Using Tailor-Made Enzymes
Squinca, P., Bilatto, S., Junior, A. C. B., & Farinas, C. S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06790 · Cited by 123
Paximada, P., Koutinas, A., Scholten, E., & Mandala, I. G. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.10.014 · Cited by 126
Review of Cellulose Nanocrystals Patents: Preparation, Composites and General Applications
Durán, N., Lemes, A. P., & Seabra, A. B. (2011) · Recent Patents on Nanotechnology · doi:10.2174/187221012798109255 · Cited by 128
“Recently, important advances in the synthesis of cellulose nanocrystals by chemical hydrolysis were performed [20, 21] by high pressure homogenization [22], steam explosion [23, 24] and enzymatic hydrolysis [25-29].”
BackgroundLv, D., Du, H., Che, X., Wu, M., Zhang, Y., Liu, C., Nie, S., Zhang, X., & Li, B. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00714 · Cited by 114
Drying techniques applied to cellulose nanofibers
Zimmermann, M. V., Borsoi, C., Lavoratti, A., Zanini, M., Zattera, A. J., & Santana, R. M. C. (2016) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684415626286 · Cited by 123
“This structure can be broken down by chemical or mechanical methods to obtain nanoscale cellulose materials that have superior properties when compared to pulp fibers in the micrometer range.(22,25) The CNCs are obtained from various vegetable fibers, and according to the vegetal origin and the method applied, such as…”
MethodEasy production of cellulose nanofibrils from corn stalk by a conventional high speed blender
Boufi, S., & Chaker, A. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.05.030 · Cited by 117
Sirviö, J. A., Hyypiö, K., Asaadi, S., Junka, K., & Liimatainen, H. (2020) · Green Chemistry · doi:10.1039/c9gc04119b · Cited by 117
Rheology of cellulose nanofibers suspensions: Boundary driven flow
Nazari, B., Kumar, V., Bousfield, D. W., & Toivakka, M. (2016) · Journal of Rheology · doi:10.1122/1.4960336 · Cited by 121
Cellulose Nanofiber-Reinforced Chitosan Hydrogel Composites for Intervertebral Disc Tissue Repair
Doench, I., Tran, T. D.-X., David, L., Montembault, A., Viguier, É., Gorzelanny, C., Sudre, G., Cachon, T., Louback-Mohamed, M., Horbelt, N., et al. (2019) · Biomimetics · doi:10.3390/biomimetics4010019 · Cited by 117
“Thus, nanofibrils are able to inherently entangle [47].”
BackgroundInfluentialRecent Advances in Cellulose Nanofibers Preparation through Energy-Efficient Approaches: A Review
Petroudy, S. R. D., Chabot, B., Loranger, É., Naebe, M., Shojaeiarani, J., Gharehkhani, S., Ahvazi, B. C., Hu, J., & Thomas, S. (2021) · Energies · doi:10.3390/en14206792 · Cited by 135
Recent advances in cellulose nanocrystals-based sensors: a review
Singh, S., Bhardwaj, S., Tiwari, P., Dev, K., Ghosh, K., & Maji, P. K. (2024) · Materials Advances · doi:10.1039/d3ma00601h · Cited by 125
Taheri, H., & Samyn, P. (2016) · Cellulose · doi:10.1007/s10570-016-0866-5 · Cited by 116
Yang, X., Berthold, F., & Berglund, L. A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00585 · Cited by 120
Lossada, F., Guo, J., Jiao, D., Groeer, S., Bourgeat‐Lami, É., Montarnal, D., & Walther, A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01659 · Cited by 116
Rheology of nanofibrillated cellulose/acrylate systems for coating applications
Grüneberger, F., Künniger, T., Zimmermann, T., & Arnold, M. (2014) · Cellulose · doi:10.1007/s10570-014-0248-9 · Cited by 119
Hydrogels Prepared from Cross-Linked Nanofibrillated Cellulose
Nair, S. S., Zhu, J. Y., Deng, Y., & Ragauskas, A. J. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400445t · Cited by 115
Paukkonen, H., Kunnari, M., Laurén, P., Hakkarainen, T., Auvinen, V.-V., Oksanen, T., Koivuniemi, R., Yliperttula, M., & Laaksonen, T. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.002 · Cited by 109
PROPOSED NANO-SCALE COALESCENCE OF CELLULOSE IN CHEMICAL PULP FIBERS DURING TECHNICAL TREATMENTS
Pönni, R., Vuorinen, T., & Kontturi, E. (2012) · BioResources · doi:10.15376/biores.7.4.6077-6108 · Cited by 123
“The macrofibrils are not easily broken as they are retained even if the cell wall has been completely disintegrated into nanoscale cellulose fibrils (Pääkkö et al. 2007; Abe et al. 2007) or crystallites (Elazzouzi-Haffraoui et al. 2008).”
BackgroundArola, S., Tammelin, T., Setälä, H., Tullila, A., & Linder, M. B. (2012) · Biomacromolecules · doi:10.1021/bm201676q · Cited by 121
Ivanova, A., Fattakhova‐Rohlfing, D., Kayaalp, B., Rathouský, J., & Bein, T. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411292u · Cited by 109
Li, W., Jiao, B., Li, S., Faisal, S., Shi, A., Fu, W., Chen, Y., & Wang, Q. (2022) · Frontiers in Nutrition · doi:10.3389/fnut.2022.864943 · Cited by 109
Fortunati, E., Yang, W., Luzi, F., Kenny, J. M., Torre, L., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.013 · Cited by 117
Cellulose micro‐ and nanofibrils (CMNF) manufacturing ‐ financial and risk assessment
de Assis, C. A., Iglesias, M. C., Bilodeau, M., Johnson, D. A., Phillips, R., Peresin, M. S., Bilek, E. M., Rojas, O. J., Venditti, R. A., & González, R. (2017) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.1835 · Cited by 125
Czaikoski, A., Cunha, R. L., & Menegalli, F. C. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116744 · Cited by 115
Svagan, A. J., Jensen, P., Двинских, С. В., Furó, I., & Berglund, L. A. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00779j · Cited by 114
Solala, I., Voļperts, A., Andersone, A., Dizhbite, T., Mironova-Ulmane, N., Vehniäinen, A., Pere, J., & Vuorinen, T. (2011) · Holzforschung · doi:10.1515/hf.2011.183 · Cited by 116
Nematic structuring of transparent and multifunctional nanocellulose papers
Zhao, M., Ansari, F., Takeuchi, M., Shimizu, M., Saito, T., Berglund, L. A., & Isogai, A. (2017) · Nanoscale Horizons · doi:10.1039/c7nh00104e · Cited by 108
Zhu, J. Y., Agarwal, U. P., Ciesielski, P. N., Himmel, M. E., Gao, R., Deng, Y., Morits, M., & Österberg, M. (2021) · Biotechnology for Biofuels · doi:10.1186/s13068-021-01963-5 · Cited by 114
Self-citationWu, T., Farnood, R., O’Kelly, K., & Chen, B. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.01.014 · Cited by 108
“NFC has been proposed as rheology modifiers due to the long and entangled fibrils (Pääkkö et al., 2007), as materials for functional aerogels (Olsson et al., 2010) and as matrix materials in transparent paper, packaging, coatings and pharmaceutical products (Henriksson et al., 2008; Herrick et al.,…”
Karabulut, E., Pettersson, T., Ankerfors, M., & Wågberg, L. (2012) · ACS Nano · doi:10.1021/nn204620j · Cited by 121
Self-citationTough nanopaper structures based on cellulose nanofibers and carbon nanotubes
Salajková, M., Valentini, L., Zhou, Q., & Berglund, L. A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.014 · Cited by 109
Naderi, A., Lindström, T., & Sundström, J. (2015) · Cellulose · doi:10.1007/s10570-015-0576-4 · Cited by 118
Self-citationWang, H., Zhang, X., Jiang, Z., Li, W., & Yu, Y. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.086 · Cited by 108
Rheological properties of an amorphous cellulose suspension
Jia, X., Chen, Y., Shi, C., Ye, Y., Abid, M., Jabbar, S., Wang, P., Zeng, X., & Wu, T. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.12.026 · Cited by 107
Metadata
- Authors
- Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., & Lindström, T.
- Affiliations
- Trinity College Dublin (IE)
- Corresponding author
- Ikkala, O.
- Lindström, T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-03
- Volume
- 8
- Issue
- 6
- Pages
- 1934-1941
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2001245625
- Cited by
- 1,962
- References
- 23
- Citations by year
- 2026: 54 · 2025: 65 · 2024: 65 · 2023: 99 · 2022: 130 · 2021: 127 · 2020: 164 · 2019: 145 · 2018: 144 · 2017: 178 · 2016: 126 · 2015: 146 · 2014: 133 · 2013: 105 · 2012: 93
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- VINNOVA
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- microfibrillated cellulose, enzymatic hydrolysis, mechanical shearing, high-pressure homogenization, cellulose fibrillation, cellulose gels, storage modulus, cellulose reinforcement
- MeSH terms
- Cellulose, Gels, Hydrogen-Ion Concentration, Hydrolysis, Magnetic Resonance Spectroscopy, Rheology, Stress, Mechanical, Temperature, Viscosity, Wood, Microscopy, Atomic Force, Cryoelectron Microscopy, Microscopy, Electron, Transmission, Macromolecular Substances, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.