Enzymatic Hydrolysis Combined with Mechanical Shearing and High-Pressure Homogenization for Nanoscale Cellulose Fibrils and Strong Gels
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Toward exploiting the attractive mechanical properties of cellulose I nanoelements, a novel route is demonstrated, which combines enzymatic hydrolysis and mechanical shearing. Previously, an aggressive acid hydrolysis and sonication of cellulose I containing fibers was shown to lead to a network of weakly hydrogen-bonded rodlike cellulose elements typically with a low aspect ratio. On the other hand, high mechanical shearing resulted in longer and entangled nanoscale cellulose elements leading to stronger networks and gels. Nevertheless, a widespread use of the latter concept has been hindered because of lack of feasible methods of preparation, suggesting a combination of mild hydrolysis and shearing to disintegrate cellulose I containing fibers into high aspect ratio cellulose I nanoscale elements. In this work, mild enzymatic hydrolysis has been introduced and combined with mechanical shearing and a high-pressure homogenization, leading to a controlled fibrillation down to nanoscale and a network of long and highly entangled cellulose I elements. The resulting strong aqueous gels exhibit more than 5 orders of magnitude tunable storage modulus G' upon changing the concentration. Cryotransmission electron microscopy, atomic force microscopy, and cross-polarization/magic-angle spinning (CP/MAS) 13C NMR suggest that the cellulose I structural elements obtained are dominated by two fractions, one with lateral dimension of 5-6 nm and one with lateral dimensions of about 10-20 nm. The thicker diameter regions may act as the junction zones for the networks. The resulting material will herein be referred to as MFC (microfibrillated cellulose). Dynamical rheology showed that the aqueous suspensions behaved as gels in the whole investigated concentration range 0.125-5.9% w/w, G' ranging from 1.5 Pa to 105 Pa. The maximum G' was high, about 2 orders of magnitude larger than typically observed for the corresponding nonentangled low aspect ratio cellulose I gels, and G' scales with concentration with the power of approximately three. The described preparation method of MFC allows control over the final properties that opens novel applications in materials science, for example, as reinforcement in composites and as templates for surface modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared to the more aggressive acid hydrolysis treatment, the enzymatic treatment yielded longer and highly entangled nanoscale fibrils.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Finally, the enzymatic step leads to reduced energy consumption allowing widespread use of the material”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“They demonstrated that the enzymatic hydrolysis step avoids blocking problems during the homogenization treatment.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [84]
In the citing paper
“Xylanases are hydrolytic enzymes that modify the random amorphous compounds (hemicelluloses) present in the plant fiber.”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
In the citing paper
“They can also initiate the random hydrolysis of the b-1,4 non-reducing terminal regions located between the glycosidic linkages of the glucose units (Hubbe, Rojas, Lucia, & Sain, 2008;Pääkko et al., 2007).”
From Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment (2014) · cites this paper as Pääkko et al., 2007
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Numerical Recipes: The Art of Scientific Computing
Ziegel, E. (1987) · Technometrics · doi:10.1080/00401706.1987.10488304 · Cited by 6,702
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Native cellulose: A composite of two distinct crystalline forms
Atalla, R. H., & VanderHart, D. L. (1984) · Science · doi:10.1126/science.223.4633.283 · Cited by 1,196
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Dynamics of concentrated polymer systems. Part 3.—The constitutive equation
Doi, M., & Edwards, S. F. (1978) · J. Chem. Soc., Faraday Trans. 2 · doi:10.1039/f29787401818 · Cited by 615
Assignment of non-crystalline forms in cellulose I by CP/MAS 13C NMR spectroscopy
Wickholm, K., Larsson, P. T., & Iversen, T. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(98)00236-5 · Cited by 423
Self-citationA CP/MAS13C NMR investigation of molecular ordering in celluloses
Larsson, P. T., Wickholm, K., & Iversen, T. (1997) · Carbohydrate Research · doi:10.1016/s0008-6215(97)00130-4 · Cited by 399
Self-citationChemical Modification of Lignocellulosic Materials
(2017) · Routledge eBooks · doi:10.1201/9781315139142 · Cited by 339
Research works printed but not linked: 28
- Hult E. L., 2001, Polymer, 42, 3314
- Hult E. L., 2002, Holzforschung, 56, 184
- Liu H., 2002, Part B: Polym. Phys
- Kim C.-W., 2006, Polymer, 47, 5107
- Fleming K., 2001, ChemEur. J., 7, 1835
- Lima M. M. D., 2004, Macromol. Rapid Commun., 25, 787
- Araki J., 1998, Physicochem. Eng. Aspects
- Turbak A. F., 1983, Appl. Polym. Symp.
- Herrick F. W., 1983, Appl. Polym. Symp.
- Nakagaito A. N., 2004, Process
- Berglund L. A., 2005, Natural Fibers, Biopolymers, and Biocomposites
- Nakagaito A. N., 2005, Process
- Nakagaito A. N., 2005, Process
- Henriksson M., 2007, Eur. Polym. J.
- Ono H., 2004, Polym. J., 36, 694
- Tatsumi D., 2002, J. Soc. Rheol., Jpn., 30, 32
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 61
- Rudraraju V. S., 2005, Int. J. Pharm., 292, 73
- Lowys M.-P., 2001, Food Hydrocolloids, 15, 32
- Ono H., 1998, Cellulose, 5, 247
- Ono H., 2001, Trans. Mater. Res. Soc. Jpn., 26, 572
- Engström A.-C., 2006, Biomacromolecules, 7, 2031
- Hausalo T., 1999, Pulp and Paper Testing, 63
- Hiltunen E., 1999, Pulp and Paper Testing, 135
- Katz K., 1984, Sven. Papperstid., 87, R48
- Guenet J.-M., 2000, J. Rheol., 44, 960
- Sahimi M., 1998, Phys. Rep., 306, 395
- Soft Matter Physics, 1999, Springer-Verlag: Berlin
Cited by
Items 701–800 of 1,002
Liao, J., Pham, K. A., & Breedveld, V. (2020) · Cellulose · doi:10.1007/s10570-020-03048-2 · Cited by 55
Mianehrow, H., Re, G. L., Carosio, F., Fina, A., Larsson, P. T., Chen, P., & Berglund, L. A. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04406g · Cited by 56
Self-citationShen, Z., Oh, K., Kwon, S., Toivakka, M., & Lee, H. L. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.01.183 · Cited by 56
In Vitro Biological Impact of Nanocellulose Fibers on Human Gut Bacteria and Gastrointestinal Cells
Lopes, V. R., Strømme, M., & Ferraz, N. (2020) · Nanomaterials · doi:10.3390/nano10061159 · Cited by 59
Nadeem, H., Athar, M., Dehghani, M., Garnier, G., & Batchelor, W. J. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155654 · Cited by 58
Safari, S., Sheikhi, A., & van de Ven, T. G. M. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.06.061 · Cited by 61
Low surface area graphene/cellulose composite as a host matrix for lithium sulphur batteries
Patel, M. U. M., Luong, N. D., Seppälä, J. V., Tchernychova, E., & Dominko, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.081 · Cited by 54
Nordqvist, D., Idermark, J., Hedenqvist, M. S., Gällstedt, M., Ankerfors, M., & Lindström, T. (2007) · Biomacromolecules · doi:10.1021/bm070246x · Cited by 62
Self-citationXu, Y., Salmi, J., Kloser, E., Perrin, F., Große, S., Denault, J., & Lau, P. C. K. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.029 · Cited by 58
Nurani, M., Akbari, V., & Taheri, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.067 · Cited by 60
Yan, J., Hu, J., Yang, R., Zhang, Z., & Zhao, W. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03765 · Cited by 57
Leguy, J., Nishiyama, Y., Jean, B., & Heux, L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03772 · Cited by 54
Espinosa, E., Rol, F., Bras, J., & Rodríguez, A. (2020) · Cellulose · doi:10.1007/s10570-020-03136-3 · Cited by 59
Cai, Y., Geng, L., Chen, S., Shi, S., Hsiao, B. S., & Peng, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04504 · Cited by 54
Blok, A. E., Bolhuis, D. P., Kibbelaar, H. V. M., Bonn, D., Velikov, K. P., & Stieger, M. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.107052 · Cited by 55
Lavoine, N., Desloges, I., Sillard, C., & Bras, J. (2014) · Cellulose · doi:10.1007/s10570-014-0392-2 · Cited by 61
“Enzymatic pre-treatment (Pääkkö et al. 2007) or TEMPO oxidation (Isogai et al.”
BackgroundMethodChinga‐Carrasco, G., Tobjörk, D., & Österbacka, R. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1213-x · Cited by 54
Missoum, K., Sadocco, P., Causio, J., Belgacem, M. N., & Bras, J. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.09.037 · Cited by 62
Zhang, Y., Xu, W., Wang, X., Ni, S., Rosqvist, E., Smått, J., Peltonen, J. P. K., Hou, Q., Qin, M., Willför, S. M., et al. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05502 · Cited by 53
The potential of TEMPO-oxidized cellulose nanofibrils as rheology modifiers in food systems
Aaen, R., Simon, S., Brodin, F. W., & Syverud, K. (2019) · Cellulose · doi:10.1007/s10570-019-02448-3 · Cited by 58
“Cellulose, a material consisting of glucose chains, is known as the most abundant biopolymer on earth, and is the main constituent of the cell walls of higher plants (Payen 1838; Purves 1954; Saxena and Brown Jr 2005).”
BackgroundHydrophobic composite foams based on nanocellulose-sepiolite for oil sorption applications
Sanguanwong, A., Flood, A. E., Ogawa, M., Martín‐Sampedro, R., Darder, M., Wicklein, B., Aranda, P., & Ruiz‐Hitzky, E. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126068 · Cited by 54
Exploring the multi‐scale structure of printing paper – a review of modern technology
Chinga‐Carrasco, G. (2009) · Journal of Microscopy · doi:10.1111/j.1365-2818.2009.03164.x · Cited by 58
“This novel material, which may be applied as a strength promoter in paper, has been denominated microfibrillated cellulose, nanofibrillated cellulose, nanofibres or nanofibrils (see e.g. Abe et al., 2007; Pääkkö et al., 2007; Ahola et al., 2008; Eriksen et al., 2008; Syverud & Stenius, 2008; Mörseburg & ChingaCarrasco…”
BackgroundMicrofibrillated cellulose : Energy-efficient preparation techniques and key properties
Ankerfors, M. (2012) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 86
Self-citationBedell, M. L., Torres, A. L., Hogan, K. J., Wang, Z., Wang, B., Melchiorri, A. J., Grande-Allen, K. J., & Mikos, A. G. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8768 · Cited by 56
“For all extrusion groups, the additional inclusion of 2% w/v NFC gave these inks the relatively highest solid material content and greater dynamic viscosity and gel-like rheological properties, which can increase the imparted shear forces under flow conditions [143, 144].”
Ridgway, C. J., & Gane, P. A. C. (2011) · Cellulose · doi:10.1007/s10570-011-9634-8 · Cited by 63
“The function of an homogenizer is explained in detail by Rees (1974).”
BackgroundNaderi, A., Lindström, T., Sundström, J., Pettersson, T., Flodberg, G., & Erlandsson, J. (2015) · Cellulose · doi:10.1007/s10570-015-0577-3 · Cited by 58
“NFCENZ.”
BackgroundMethodSelf-citationBettaieb, F., Nechyporchuk, O., Khiari, R., Mhenni, M. F., Dufresne, A., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.091 · Cited by 57
Interfacial properties of cellulose nanoparticles with different lengths from ginkgo seed shells
Ni, Y., Fan, L., & Sun, Y. Q. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106121 · Cited by 52
Isolation and characterization of cellulose nanowhiskers from Acacia caesia plant
Thomas, S. K., Begum, P. M. S., D., M. D. C., Salim, N. V., Hameed, N., Rangappa, S. M., Siengchin, S., & Parameswaranpillai, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50213 · Cited by 55
Lindström, T., Aulin, C., Naderi, A., & Ankerfors, M. (2014) · Wiley eBooks · doi:10.1002/0471440264.pst614 · Cited by 64
Self-citationEmploying Cellulose Nanofiber-Based Hydrogels for Burn Dressing
Basti, A. T. K., Jonoobi, M., Sepahvand, S., Ashori, A., Siracusa, V., Rabie, D., Mekonnen, T. H., & Naeijian, F. (2022) · Polymers · doi:10.3390/polym14061207 · Cited by 51
“Paakko et al. (2007) reported that the modulus of elasticity of CNF suspension is much higher than its modulus of loss [43].”
BackgroundInfluentialDias, M. C., Belgacem, M. N., de Resende, J. V., Martins, M. A., Damásio, R. A. P., Tonoli, G. H. D., & Ferreira, S. R. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.04.005 · Cited by 55
Ilyin, S. O., Gorbacheva, S. N., & Yadykova, A. Y. (2022) · Tribology International · doi:10.1016/j.triboint.2022.108080 · Cited by 53
Enzymatic hydrolysis of different allomorphic forms of microcrystalline cellulose
Ciolacu, D. E., Gorgieva, S., Tampu, D., & Kokol, V. (2011) · Cellulose · doi:10.1007/s10570-011-9601-4 · Cited by 56
Naderi, A., & Lindström, T. (2014) · Cellulose · doi:10.1007/s10570-014-0394-0 · Cited by 55
“…fibrillation (Saarikoski et al. 2012; Shogren et al. 2011), the effect of temperature (Herrick et al. 1983; Iotti et al. 2011; Lowys et al. 2001), pH (Pääkkö et al. 2007; Jowkarderis and van de Ven 2014), and the effect of addition of various polymeric additives on the rheology of…”
BackgroundSelf-citationMihranyan, A., Esmaeili, M., Razaq, A., Alexeichik, D., & Lindström, T. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6305-6 · Cited by 52
Self-citationChinga‐Carrasco, G., & Syverud, K. (2009) · Journal of Nanoparticle Research · doi:10.1007/s11051-009-9710-2 · Cited by 60
Guo, J., Filpponen, I., Su, P., Laine, J., & Rojas, O. J. (2016) · Cellulose · doi:10.1007/s10570-016-1042-7 · Cited by 53
Self-citationGuirimand, G. G. Y., Inokuma, K., Bamba, T., Matsuda, M., Morita, K., Sasaki, K., Ogino, C., Berrin, J., Hasunuma, T., & Kondo, A. (2019) · Green Chemistry · doi:10.1039/c8gc03864c · Cited by 56
Berto, G. L., Mattos, B. D., Rojas, O. J., & Arantes, V. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08162 · Cited by 59
Sustainable Wood Nanotechnologies for Wood Composites Processed by In-Situ Polymerization
Montanari, C., Olsén, P., & Berglund, L. A. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.682883 · Cited by 56
Research progress of smart response composite hydrogels based on nanocellulose
Hu, S., Zhi, Y., Shan, S., & Ni, Y. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118741 · Cited by 51
Micro- and nanocelluloses from non-wood waste sources; processes and use in industrial applications
Gröndahl, J., Karisalmi, K., & Vapaavuori, J. (2021) · Soft Matter · doi:10.1039/d1sm00958c · Cited by 55
Sustainable production of nanocellulose: Technoeconomic assessment, energy savings and scalability
Kargupta, W., Stevenson, T., Sharman, S., Tanner, J., & Batchelor, W. J. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.138748 · Cited by 52
Nanotechnology in wood science: Innovations and applications
Bansal, R., Barshilia, H. C., & Pandey, K. K. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130025 · Cited by 55
Larsson, K., Berglund, L. A., Ankerfors, M., & Lindström, T. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36413 · Cited by 63
Self-citationMeyabadi, T. F., & Dadashian, F. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0313-7 · Cited by 55
Elastic Modulus of Microfibrillar Cellulose Gels
Hill, R. J. (2008) · Biomacromolecules · doi:10.1021/bm800490x · Cited by 58
Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites
Hietala, M., Sain, S., & Oksman, K. (2017) · Cellulose · doi:10.1007/s10570-017-1245-6 · Cited by 53
“The viscosity of the nanofiber suspension could be related to the strength of the network formed from entangled nanofibers, their aspect ratio and ability to form hydrogen bonds (Pääkkö et al. 2007; Liimatainen et al. 2013).”
BackgroundInfluentialImlimthan, S., Otaru, S., Keinänen, O. M., Correia, A., Lintinen, K., Santos, H. A., Airaksinen, A. J., Kostiainen, M. A., & Sarparanta, M. P. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01313 · Cited by 53
Basu, A., Celma, G., Strømme, M., & Ferraz, N. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00370 · Cited by 54
Karnaouri, A., Antonopoulou, I., Zerva, A., Dimarogona, M., Topakas, E., Rova, U., & Christakopoulos, P. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.062 · Cited by 55
A process for deriving high quality cellulose nanofibrils from water hyacinth invasive species
Sun, D., Onyianta, A. J., O’Rourke, D., Perrin, G., Popescu, C., Saw, L. H., Cai, Z., & Dorris, M. (2020) · Cellulose · doi:10.1007/s10570-020-03038-4 · Cited by 59
Phosphorylated cellulose nanofibrils: structure-morphology-rheology relationships
Patoary, M. K., Farooq, A., Zaarour, B., & Liu, L. (2021) · Cellulose · doi:10.1007/s10570-021-03786-x · Cited by 50
Molecular weight and crystallinity alteration of cellulose via prolonged ultrasound fragmentation
Wong, S., Kasapis, S., & Huang, D. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2011.02.028 · Cited by 52
An approach to produce nano-ligno-cellulose from mechanical pulp fine materials
Osong, S. H., Norgren, S., & Engstrand, P. (2013) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2013-28-04-p472-479 · Cited by 50
“The curve in Fig 10 is quite similar to that of Pääkkö et al. (2007) at 0.66% and 0.33% concentrations.”
BackgroundMethodResultInfluentialCellulosic nanofibrils from eucalyptus, acacia and pine fibers
Fall, A. B., Burman, A., & Wågberg, L. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p176-184 · Cited by 53
“2013), even though recent developments in chemical (Wågberg et al. 1987; Isogai, Kato 1998; Wågberg et al. 2008) or enzymatic (Henriksson et al. 2007; Pääkkö et al. 2007) pretreatment of the fibers greatly reduces the energy required to disintegrate the fiber wall.”
BackgroundMeriçer, Ç., Minelli, M., Angelis, M. G. D., Baschetti, M. G., Stancampiano, A., Laurita, R., Gherardi, M., Colombo, V., Trifol, J., Szabó, P., et al. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.03.020 · Cited by 54
Self-citationIsolating nanocellulose fibrills from bamboo parenchymal cells with high intensity ultrasonication
Wang, H., Zhang, X., Jiang, Z., Yu, Z., & Yu, Y. (2015) · Holzforschung · doi:10.1515/hf-2015-0114 · Cited by 52
“In the high-pressure homogenization method both shearing and impact forces are exerted on cell walls through rapid opening and closing of valves during homogenization and this leads to a high degree of fibrillation (Nakagaito and Yano 2005; Pääkkö et al. 2007; Stenstad et al. 2008; Hu et al. 2015).”
MethodTanaka, R., Saito, T., Hänninen, T., Ono, Y., Hakalahti, M., Tammelin, T., & Isogai, A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00316 · Cited by 56
Poyraz, B., Tozluoğlu, A., Candan, Z., & Demir, A. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2017-0022 · Cited by 49
Quantification of a tightly adsorbed monolayer of xylan on cellulose surface
Falcoz-Vigne, L., Ogawa, Y., Molina-Boisseau, S., Nishiyama, Y., Meyer, V., Petit‐Conil, M., Mazeau, K., & Heux, L. (2017) · Cellulose · doi:10.1007/s10570-017-1401-z · Cited by 49
“These samples were subjected to a mechano-enzymatic treatment, adapted at the Centre Technique du Papier, from the method described by Pääkkö et al. (2007).”
MethodGeng, L., Chen, B., Peng, X., & Kuang, T. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.054 · Cited by 53
Characterization of pulp derived nanocellulose hydrogels using AVAP® technology
Kyle, S., Jessop, Z. M., Al‐Sabah, A., Hawkins, K. M., Lewis, A. R., Maffeïs, T. G. G., Charbonneau, C. M. E., Gazze, A. S., Francis, L. W., Iakovlev, M., et al. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.091 · Cited by 52
“…for tissue engineering applications due to its biocompatibility, nanostructure, water-holding capacity, high strength and morphological similarities to collagen, thereby providing good cell support (Ahrem et al., 2014; Dugan, Gough, & Eichhorn, 2013; Markstedt et al., 2015; Paakko et al., 2007).”
Kosel, J., Šinkovec, A., & Dular, M. (2019) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2019.104721 · Cited by 49
“Refining techniques include acid hydrolysis [9], high-pressure homogenization [10] and mechanical processes including grinding [11], ultrasonic cavitation [12] and freeze crushing [13].”
MethodPere, J., Tammelin, T., Niemi, P., Lille, M. E., Virtanen, T., Penttilä, P. A., Ahvenainen, P., & Grönqvist, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05202 · Cited by 58
Health and toxicological effects of nanocellulose when used as a food ingredient: A review
Cañas, A. I., Hoyos, C. G., Velásquez-Cock, J. A., Gañán, P. F., Triana, O., Cogollo-Flórez, J., Romero‐Sáez, M., Hincapié, N. C., & Zuluaga, R. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121382 · Cited by 52
Comparison of Multilayer Formation Between Different Cellulose Nanofibrils and Cationic Polymers
Eronen, P., Laine, J., Ruokolainen, J., & Österberg, M. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.028 · Cited by 59
Self-citationNanostructured Cellulose II Gel Consisting of Spherical Particles
Beaumont, M., Rennhofer, H., Opietnik, M., Lichtenegger, H. C., Potthast, A., & Rosenau, T. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01036 · Cited by 51
Huang, F. Y., Wu, X., Yu, Y., Lu, Y., & Chen, Q. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.010 · Cited by 49
Shear rheology of micro-fibrillar cellulose aqueous suspensions
Shafiei-Sabet, S., Martinez, M., & Olson, J. A. (2016) · Cellulose · doi:10.1007/s10570-016-1040-9 · Cited by 49
“…(Nechyporchuk et al. 2014; Jia et al. 2014; Jowkarderis and Van de Ven 2014; Karppinen et al. 2012; Iotti et al. 2011; Lasseuguette et al. 2008; Pääkkö et al. 2007; Tatsumi 2007; Tatsumi et al. 1999 and 2002) and cellulose nanocrystals (CNC) (Shafiei-Sabet et al. 2012, 2013, 2014; Lu et al.…”
BackgroundMethodResultInfluentialPiezoelectric Sensitivity of a Layered Film of Chitosan and Cellulose Nanocrystals
Hänninen, A., Rajala, S., Salpavaara, T., Kellomäki, M., & Tuukkanen, S. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.11.397 · Cited by 49
Paukkonen, H., Ukkonen, A., Szilvay, G. R., Yliperttula, M. L., & Laaksonen, T. (2017) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2017.01.029 · Cited by 52
“It has been shown for both NFC grades in several previous studies that the concentration affects the viscosity and intense shear thinning behavior is observed (Benhamou et al., 2014; Bhattacharya et al., 2012; Nechyporchuk et al., 2014; Pääkkö et al., 2007).”
BackgroundHigh aspect ratio nanocellulose from an extremophile spinifex grass by controlled acid hydrolysis
Amiralian, N., Annamalai, P. K., Garvey, C. J., Jiang, E., Memmott, P. C., & Martin, D. J. (2017) · Cellulose · doi:10.1007/s10570-017-1379-6 · Cited by 48
“…2009; Lahiji et al. 2010; Tanaka and Iwata 2006; Tashiro and Kobayashi 1991), and only a few reports have concentrated on the transverse elastic modulus of an individual CNC using AFM or theoretical modelling (Jaswon et al. 1968; Lahiji et al. 2010; Pakzad et al. 2012; Tashiro and Kobayashi 1991).”
BackgroundMethodInfluentialLarsson, P. A., Riazanova, A. V., Çınar, G., Rojas, R., Øvrebø, H. H., Wågberg, L., & Berglund, L. A. (2018) · Cellulose · doi:10.1007/s10570-018-2214-4 · Cited by 51
Self-citationBenselfelt, T., & Wågberg, L. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00401 · Cited by 50
Nanocellulose in polymer composites and biomedical applications
Lü, Y., Tekinalp, H., Eberle, C. C., Peter, W. H., Naskar, A. K., & Ozcan, S. (2014) · TAPPI Journal · doi:10.32964/tj13.6.47 · Cited by 54
Fire retardancy and thermal behaviors of Cellulose nanofiber/zinc borate aerogel
Cheng, X., Zhu, S., Pan, Y., Deng, Y., Shi, L. X., & Gong, L. (2020) · Cellulose · doi:10.1007/s10570-020-03289-1 · Cited by 49
Serra-Parareda, F., Tarrés, Q., Sanchez-Salvador, J. L., Campano, C., Pèlach, M. À., Mutjé, P., Negro, C., & Delgado‐Aguilar, M. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113877 · Cited by 49
Kumar, A., Zhang, S., Wu, G., Wu, C. C., Chen, J., Baskaran, R., & Liu, Z. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.11.006 · Cited by 47
Nechyporchuk, O., Belgacem, M. N., & Pignon, F. (2015) · Cellulose · doi:10.1007/s10570-015-0640-0 · Cited by 56
“It has been reported that the viscosity increases sharply with a slight increase of cellulose concentration (Pääkkö et al. 2007; Agoda-Tandjawa et al. 2010; Shogren et al. 2011).”
BackgroundResultBinding of cellulose binding modules reveal differences between cellulose substrates
Arola, S., & Linder, M. B. (2016) · Scientific Reports · doi:10.1038/srep35358 · Cited by 53
“The features, which are origin dependent in cellulose substrates are their crystalline structure and amorphous to crystalline ratio; wood cellulose crystalline regions compose mainly of cellulose I β and BMCC of cellulose I α , and BMCC is more crystalline 29–31 .”
Gupta, S., Martoïa, F., Orgéas, L., & Dumont, P. (2018) · Applied Sciences · doi:10.3390/app8122463 · Cited by 56
Cellulose nanofibrils as rheology modifier in mayonnaise – A pilot scale demonstration
Heggset, E. B., Aaen, R., Veslum, T., Henriksson, M., Simon, S., & Syverud, K. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106084 · Cited by 52
Burger, D., Winter, A., Subbiahdoss, G., Oberlerchner, J. T., Beaumont, M., Tamada, Y., & Rosenau, T. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03492 · Cited by 51
Han, X., Bi, R., Oğuzlu, H., Takada, M., Jiang, J., Jiang, F., Bao, J., & Saddler, J. N. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05183 · Cited by 48
Li, Z., Bai, B., Xu, D., Meng, Z., Ma, T., Gou, C., Gao, K. S., Sun, R., Wu, H., Hou, J., et al. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02999 · Cited by 46
Zambrano, F., Wang, Y., Zwilling, J. D., Venditti, R. A., Jameel, H., Rojas, O. J., & González, R. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117430 · Cited by 46
Manhas, N., Kandasubramanian, B., Prajith, P., Rule, P., & Nimje, S. V. (2015) · RSC Advances · doi:10.1039/c4ra17191h · Cited by 49
Navarro, J. R. G., Wennmalm, S., Godfrey, J., Breitholtz, M., & Edlund, U. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01716 · Cited by 50
He, M. H., Yang, G., Cho, B., Lee, Y. K., & Won, J. M. (2017) · Cellulose · doi:10.1007/s10570-017-1495-3 · Cited by 47
Zhai, L., Kim, H. C., Kim, J. W., Kang, J., & Kim, J. (2018) · Cellulose · doi:10.1007/s10570-018-1836-x · Cited by 47
“2007), high pressure homogenization (Pääkko et al. 2007), ball milling (Gilberto et al.”
BackgroundMethodVadodaria, S. S., Onyianta, A. J., & Sun, D. (2018) · Cellulose · doi:10.1007/s10570-018-1963-4 · Cited by 46
Molecular Weight Dependence of Methylcellulose Fibrillar Networks
Schmidt, P. W., Morozova, S., Owens, P. M., Adden, R., Li, Y., Bates, F. S., & Lodge, T. P. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01292 · Cited by 46
Nanocellulose-Based Conductive Membranes for Free-Standing Supercapacitors: A Review
Hsu, H. H., & Zhong, W. (2019) · Membranes · doi:10.3390/membranes9060074 · Cited by 51
“Refining and high-pressure homogenizing processes are now performed by manufactures because of their high efficiency and productivity [34,35].”
BackgroundXue, B., Yang, Y., Tang, R. H., Sun, Y., Sun, S., Cao, X., Li, P., Zhang, Z., & Li, X. (2019) · Cellulose · doi:10.1007/s10570-019-02846-7 · Cited by 46
Fayaz, G., Soleimanian, Y., Mhamadi, M., Turgeon, S. L., & Khalloufi, S. (2022) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12934 · Cited by 48
Nanofiber-reinforced biocomposites
Orasugh, J. T., Ghosh, S. K., & Chattopadhyay, D. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819904-6.00010-4 · Cited by 54
When nanocellulose meets hydrogels: the exciting story of nanocellulose hydrogels taking flight
Du, Y., & Feng, G. (2023) · Green Chemistry · doi:10.1039/d3gc01829f · Cited by 47
Contact-active antibacterial aerogels from cellulose nanofibrils
Henschen, J., Illergård, J., Larsson, P. A., Ek, M., & Wågberg, L. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.06.031 · Cited by 46
Self-citation
Metadata
- Authors
- Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., & Lindström, T.
- Affiliations
- Trinity College Dublin (IE)
- Corresponding author
- Ikkala, O.
- Lindström, T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-05-03
- Volume
- 8
- Issue
- 6
- Pages
- 1934-1941
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2001245625
- Cited by
- 1,962
- References
- 23
- Citations by year
- 2026: 54 · 2025: 65 · 2024: 65 · 2023: 99 · 2022: 130 · 2021: 127 · 2020: 164 · 2019: 145 · 2018: 144 · 2017: 178 · 2016: 126 · 2015: 146 · 2014: 133 · 2013: 105 · 2012: 93
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- VINNOVA
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Food Science › Polysaccharides Composition and Applications
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- microfibrillated cellulose, enzymatic hydrolysis, mechanical shearing, high-pressure homogenization, cellulose fibrillation, cellulose gels, storage modulus, cellulose reinforcement
- MeSH terms
- Cellulose, Gels, Hydrogen-Ion Concentration, Hydrolysis, Magnetic Resonance Spectroscopy, Rheology, Stress, Mechanical, Temperature, Viscosity, Wood, Microscopy, Atomic Force, Cryoelectron Microscopy, Microscopy, Electron, Transmission, Macromolecular Substances, Nanoparticles
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.