The DOI matches its Crossref record; 150 of the 150 references it cites were found in a registry or an index.
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Abstract
The quality of the monomers lactic acid and lactide as well as the chemical changes induced during polymerization and processing are crucial parameters for controlling the properties of the resulting poly(lactic acid) (PLA) products. This review presents the most important analysis and characterization methods for quality assessment of PLA and its precursors. The impurities typically present in lactic acid or lactide monomers and their possible origins and effects on resulting PLA products are discussed. The significance of the analyses for the different polymer production stages is considered, and special applications of the methods for studying features specific for PLA-based materials are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Interest in its mass production stems from its good performance; for example, polylactic acid has good physical properties and can be used to yield various plastic products, such as fast-food lunch boxes, and fabrics for industrial and civilian use [44,48,49,50].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [44]
In the citing paper
“Commercially feasible methods for obtaining and purifying lactide involve steps such as condensing lactic acid at 115–179 °C, removing the condensed water, and removing the mesolactic acid and low-molecular polymer through recrystallization to obtain pure l- or d, l-lactide with high molecular weight [9,43,44].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [44]
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Lactic acid: recent advances in products, processes and technologies — a review
Datta, R., & Henry, M. (2006) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1486 · Cited by 973
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Research works printed but not linked: 7
- Faisal M., 2007, Asian J. Chem., 19, 1714
- Annual Book of ASTM Standards, 6
- Annual Book of ASTM Standards, 6
- Li R., 2000, Huaxue Shijie, 41, 103
- Witzke D. R., 1998, Diss. Abstr. Int., B, 59, 327
- Grodowska K., 2010, Acta Pol. Pharm., 67, 13
- Li S., 1990, J. Mater. Sci.: Mater. Med., 1, 198
Cited by
Isikgor, F. H., & Becer, C. R. (2015) · Polymer Chemistry · doi:10.1039/c5py00263j · Cited by 2,775
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Conducting Polymers for Tissue Engineering
Guo, B., & Ma, P. X. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00276 · Cited by 835
Lactic acid as a platform chemical in the biobased economy: the role of chemocatalysis
Dusselier, M., Van Wouwe, P., Dewaele, A., Makshina, E., & Sels, B. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00069a · Cited by 827
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Ring-opening copolymerization (ROCOP): synthesis and properties of polyesters and polycarbonates
Paul, S., Zhu, Y., Romain, C., Brooks, R., Saini, P. K., & Williams, C. K. (2015) · Chemical Communications · doi:10.1039/c4cc10113h · Cited by 593
Applications of PLA in modern medicine
DeStefano, V., Khan, S., & Tabada, A. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.08.002 · Cited by 547
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
“mesolactic acid and low‐molecular polymer through recrystallization to obtain pure L‐ or D, L‐lactide with high molecular weight [9,43,44].”
BackgroundComplete Photocatalytic Mineralization of Microplastic on TiO2 Nanoparticle Film
Nabi, I., Bacha, A.-U.-R., Li, K., Cheng, H., Wang, T., Liu, Y., Ajmal, S., Yang, Y., Feng, Y., & Zhang, L. (2020) · iScience · doi:10.1016/j.isci.2020.101326 · Cited by 446
de Clippel, F., Dusselier, M., Van Rompaey, R., Vanelderen, P., Dijkmans, J., Makshina, E., Giebeler, L., Oswald, S., Baron, G. V., Denayer, J. F. M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja301678w · Cited by 382
Shape-selective zeolite catalysis for bioplastics production
Dusselier, M., Van Wouwe, P., Dewaele, A., Jacobs, P. A., & Sels, B. F. (2015) · Science · doi:10.1126/science.aaa7169 · Cited by 376
Recycling of Bioplastics: Routes and Benefits
Lamberti, F. M., Román-Ramírez, L. A., & Wood, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01795-8 · Cited by 365
Albertsson, A.-C., & Hakkarainen, M. (2017) · Science · doi:10.1126/science.aap8115 · Cited by 344
Self-citationStereochemical enhancement of polymer properties
Worch, J. C., Prydderch, H., Jimaja, S., Bexis, P., Becker, M. L., & Dove, A. P. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0117-z · Cited by 336
Electrospinning production of nanofibrous membranes
Mishra, R. K., Mishra, P., Verma, K., Mondal, A., Chaudhary, R. G., Abolhasani, M. M., & Loganathan, S. (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-00838-w · Cited by 244
Transparent Films Based on PLA and Montmorillonite with Tunable Oxygen Barrier Properties
Svagan, A. J., Åkesson, A., Cárdenas, M., Bulut, S., Knudsen, J. C., Risbo, J., & Plackett, D. (2012) · Biomacromolecules · doi:10.1021/bm201438m · Cited by 244
MOF catalysts in biomass upgrading towards value-added fine chemicals
Herbst, A., & Janiak, C. (2017) · CrystEngComm · doi:10.1039/c6ce01782g · Cited by 233
Bakewell, C., Cao, T.-P.-A., Long, N., Le Goff, X. F., Auffrant, A., & Williams, C. K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja310003v · Cited by 226
Polylactide-Based Bionanocomposites: A Promising Class of Hybrid Materials
Sinha Ray, S. (2012) · Accounts of Chemical Research · doi:10.1021/ar3000376 · Cited by 221
Stimuli-responsive materials in additive manufacturing
Shafranek, R. T., Millik, S. C., Smith, P. T., Lee, C.-U., Boydston, A. J., & Nelson, A. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.002 · Cited by 210
Past, Present, and Future of Nerve Conduits in the Treatment of Peripheral Nerve Injury
Muheremu, A., & Ao, Q. (2015) · BioMed Research International · doi:10.1155/2015/237507 · Cited by 199
Ferreira, F. V., Dufresne, A., Pinheiro, I. F., Souza, D. H. S., Gouveia, R. F., Mei, L. H. I., & Lona, L. M. F. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.045 · Cited by 196
Hydrolysis and Biodegradation of Poly(lactic acid)
Gorrasi, G., & Pantani, R. (2017) · Advances in Polymer Science · doi:10.1007/12_2016_12 · Cited by 181
Ramos, M., Jiménez, A., Peltzer, M., & Garrigós, M. C. (2014) · Food Chemistry · doi:10.1016/j.foodchem.2014.04.026 · Cited by 186
“33 PLA is a highly transparent and rigid material with a relatively low crystallization rate, 34 making it a promising candidate for the fabrication of biaxial oriented films, 35 thermoformed containers and stretch-blown bottles (Inkinen et al., 2011).”
BackgroundPleissner, D., Demichelis, F., Mariano, S., Fiore, S., Navarro Gutiérrez, I. M., Schneider, R., & Venus, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.065 · Cited by 185
“Inkinen et al. reviewed the quality 464 requirements of lactic acid formulation used in poly(lactic acid) synthesis and stated that the 465 impurities should be below 0.05 mol % (Inkinen et al., 2011).”
BackgroundInfluentialLactide Synthesis and Chirality Control for Polylactic acid Production
Van Wouwe, P., Dusselier, M., Vanleeuw, E., & Sels, B. (2016) · ChemSusChem · doi:10.1002/cssc.201501695 · Cited by 179
Metal‐Size Influence in Iso‐Selective Lactide Polymerization
Bakewell, C., White, A. J. P., Long, N. J., & Williams, C. K. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403643 · Cited by 178
Zhu, J.-B., & Chen, E. Y.-X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08658 · Cited by 173
Chen, H.-L., Dutta, S., Huang, P.-Y., & Lin, C.-C. (2012) · Organometallics · doi:10.1021/om201281w · Cited by 170
PLA bioplastic production: From monomer to the polymer
Yu, J., Xu, S., Liu, B., Wang, H., Qiao, F., Ren, X., & Wei, Q. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112076 · Cited by 167
Biobased building blocks for the rational design of renewable block polymers
Holmberg, A. L., Reno, K. H., Wool, R. P., & Epps, III (2014) · Soft Matter · doi:10.1039/c4sm01220h · Cited by 161
Burgos, N., Tolaguera, D., Fiori, S., & Jiménez, A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0628-5 · Cited by 160
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
O’Dea, R. M., Willie, J. A., & Epps, T. H. I. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00024 · Cited by 168
Thevenon, A., Romain, C., Bennington, M. S., White, A. J. P., Davidson, H. J., Brooker, S., & Williams, C. K. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602930 · Cited by 151
Notta‐Cuvier, D., Odent, J., Delille, R., Murariu, M., Lauro, F., Raquez, J., Bennani, B., & Dúbois, P. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.007 · Cited by 167
Gregory, G. L., López‐Vidal, E. M., & Buchard, A. (2017) · Chemical Communications · doi:10.1039/c6cc09578j · Cited by 159
Photochemical Behavior of Polylactide/ZnO Nanocomposite Films
Thérias, S., Larché, J.-F., Bussière, P., Gardette, J., Murariu, M., & Dúbois, P. (2012) · Biomacromolecules · doi:10.1021/bm301071w · Cited by 150
Polysaccharide nanocrystals as fillers for PLA based nanocomposites
Scaffaro, R., Botta, L., Lopresti, F., Maio, A., & Sutera, F. (2016) · Cellulose · doi:10.1007/s10570-016-1143-3 · Cited by 155
Mauck, S. C., Wang, S., Ding, W., Rohde, B. J., Fortune, C. K., Yang, G., Ahn, S., & Robertson, M. L. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02613 · Cited by 149
Functionalized cellulose nanocrystals as reinforcement in biodegradable polymer nanocomposites
Ferreira, F. V., Pinheiro, I. F., Gouveia, R. F., Thim, G. P., & Lona, L. M. F. (2017) · Polymer Composites · doi:10.1002/pc.24583 · Cited by 158
Initiators for the stereoselective ring-opening polymerization of meso-lactide
Buffet, J., & Okuda, J. (2011) · Polymer Chemistry · doi:10.1039/c1py00206f · Cited by 147
Tsuji, H. (2013) · Wiley eBooks · doi:10.1002/9781118676646.ch8 · Cited by 163
Film forming microbial biopolymers for commercial applications—A review
Vijayendra, S. V. N., & Shamala, T. R. (2013) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2013.798254 · Cited by 169
“…Saranya Devi et al. (2012) (b) Polylactic acid from lactic acid Lactobacillus bulgaricus, L. delbrueckii, L. amylophilus, L. leichmanii, L. rhamnosus Inkinen et al. (2011); Lasprilla et al. (2012); Lunelli et al. (2010) the polymer is envisaged to attain the status of commodity polymer shortly.”
BackgroundMethodThe crystallization behavior of poly(lactic acid) with different types of nucleating agents
Feng, Y., Ma, P., Xu, P., Wang, R., Dong, W., Chen, M., & Joziasse, C. A. P. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.095 · Cited by 138
“Poly(lactic acid) (PLA), as a bio-based and biodegradable polyester, its monomers are mainly derived from renewable resources like corn, potato, sugarcane, and the wastes of its products can degrade into CO2 and H2O completely under composting conditions [4,5], which results in reduction of environmental pollution in…”
BackgroundShi, X., Zhang, G., Phuong, T. V., & Lazzeri, A. (2015) · Molecules · doi:10.3390/molecules20011579 · Cited by 139
“By and large, commercial PLA products with a high molar mass are usually produced from lactide, the ring-formed dimer of lactic acid, via the ring-opening polymerization (ROP) route [4].”
BackgroundCacciotti, I., Mori, S., Cherubini, V., & Nanni, F. M. C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.018 · Cited by 137
“In addition to the typical PLA vibrational modes [26-29], some extra peaks can be evidenced in the case of the films containing the extract, including a double peak around 1750 cm-1 (precisely at 1746 cm-1 and at 1753 cm-1) and the peaks at 2920 cm-1, 2850 cm-1 and 737 cm-1.”
BackgroundManzanares‐Palenzuela, C. L., Hermanová, S., Sofer, Z., & Pumera, M. (2019) · Nanoscale · doi:10.1039/c9nr02754h · Cited by 127
Bioplastics: Innovation for Green Transition
Costa, A. F., Encarnação, T., Tavares, R., Bom, T. T., & Mateus, A. (2023) · Polymers · doi:10.3390/polym15030517 · Cited by 151
Lactide Polymerisation with Complexes of Neutral N‐Donors – New Strategies for Robust Catalysts
Vieira, I. D. S., & Herres‐Pawlis, S. (2012) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201101131 · Cited by 136
Triblock copolymers from lactide and telechelic poly(cyclohexene carbonate)
Kember, M. R., Copley, J., Buchard, A., & Williams, C. K. (2012) · Polymer Chemistry · doi:10.1039/c2py00543c · Cited by 126
Goffin, A., Habibi, Y., Raquez, J., & Dúbois, P. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3008196 · Cited by 125
Dielectric Properties of 3D Printed Polylactic Acid
Dichtl, C., Sippel, P., & Krohns, S. (2017) · Advances in Materials Science and Engineering · doi:10.1155/2017/6913835 · Cited by 120
Nie, K., Fang, L., Yao, Y., Zhang, Y., Shen, Q., & Wang, Y. (2012) · Inorganic Chemistry · doi:10.1021/ic301746c · Cited by 127
Eltouby, P., Shyha, I., Li, C., & Khaliq, J. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.03.126 · Cited by 121
Medical applications and prospects of polylactic acid materials
Yang, Z., Yin, G., Sun, S., & Xu, P. (2024) · iScience · doi:10.1016/j.isci.2024.111512 · Cited by 136
Aydoğdu, A., Yıldız, E., Ayhan, Z., Aydogdu, Y., Şümnü, G., & Şahin, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.006 · Cited by 117
Xu, H., Xie, L., Chen, Y., Huang, H., Xu, J., Zhong, G., Hsiao, B. S., & Li, Z. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc4003032 · Cited by 114
Kalita, N. K., Nagar, M. K., Mudenur, C., Kalamdhad, A. S., & Katiyar, V. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.02.021 · Cited by 119
Cao, T., Buchard, A., Goff, X. F. L., Auffrant, A., & Williams, C. K. (2012) · Inorganic Chemistry · doi:10.1021/ic202015z · Cited by 114
Villegas, C., Torres, A., Rios, M., Rojas, A., Romero, J., de Dicastillo, C. L., Valenzuela, X., Galotto, M. J., & Guarda, A. (2017) · Food Research International · doi:10.1016/j.foodres.2017.06.031 · Cited by 114
Aznar, M., Úbeda, S., Dreolin, N., & Nerín, C. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.10.055 · Cited by 112
Zhang, J., Yin, Z., Ren, L., Liu, Q., Ren, L., Yang, X., & Zhou, X. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101568 · Cited by 116
de França, J. O. C., Valadares, D. D. S., Paiva, M. F., Dias, S. C. L., & Dias, J. A. (2022) · Polymers · doi:10.3390/polym14122317 · Cited by 122
“Even though the packaging segment is currently the main one in terms of application of these polymers [28], others tend to increase their use, due to the possibility of modeling their properties from functionalization, copolymerization, blending with other polymers, the addition of plasticizers and additives [29,30].”
BackgroundPhosphasalen Indium Complexes Showing High Rates and Isoselectivities in rac‐Lactide Polymerizations
Myers, D., White, A. J. P., Forsyth, C. M., Bown, M., & Williams, C. K. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701745 · Cited by 113
Singh, D., Babbar, A., Jain, V., Gupta, D., Saxena, S., & Dwibedi, V. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1625-y · Cited by 109
Catalytic metal-based systems for controlled statistical copolymerisation of lactide with a lactone
Stirling, E., Champouret, Y., & Visseaux, M. (2018) · Polymer Chemistry · doi:10.1039/c8py00310f · Cited by 108
Pang, X., Duan, R., Li, X., Hu, C., Wang, X., & Chen, X. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02662 · Cited by 100
Synthesis of Lactide from Alkyl Lactate via a Prepolymer Route
Upare, P. P., Hwang, Y. K., Chang, J.-S., & Hwang, D. W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202714n · Cited by 99
Kumar, A., Tumu, V. R., Chowdhury, S. R., & Ramana Reddy, S. V. S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.057 · Cited by 99
Bakewell, C., Platel, R. H., Cary, S. K., Hubbard, S. M., Roaf, J. M., Levine, A. C., White, A. J. P., Long, N. J., Haaf, M., & Williams, C. K. (2012) · Organometallics · doi:10.1021/om300307t · Cited by 99
Migration of oligomers from a food contact biopolymer based on polylactic acid (PLA) and polyester
Úbeda, S., Aznar, M., Alfaro, P., & Nerín, C. (2019) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-019-01831-0 · Cited by 104
Biodegradable poly(lactic acid)-based scaffolds: synthesis and biomedical applications
Ghalia, M. A., & Dahman, Y. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1227-2 · Cited by 97
Exosome-mimetics as an engineered gene-activated matrix induces in-situ vascularized osteogenesis
Zha, Y., Lin, T., Li, Y., Zhang, X., Wang, Z., Li, Z., Ye, Y., Wang, B., Zhang, S., & Wang, J. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.119985 · Cited by 94
Mistry, A. N., Kachenchart, B., Wongthanaroj, A., Somwangthanaroj, A., & Luepromchai, E. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110051 · Cited by 93
Ji, D., Liu, Z., Lan, X., Wu, F., Xie, B., & Yang, M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39580 · Cited by 93
Biodegradable Agricultural Mulches Derived from Biopolymers
Hayes, D. G., Dharmalingam, S., Wadsworth, L. C., Leonas, K. K., Miles, C. A., & Inglis, D. A. (2012) · ACS symposium series · doi:10.1021/bk-2012-1114.ch013 · Cited by 99
Xie, L., Xu, H., Chen, J.-B., Zhang, Z., Hsiao, B. S., Zhong, G., Chen, J., & Li, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00294 · Cited by 89
Development of novel antimicrobial films based on poly(lactic acid) and essential oils
Yahyaoui, M., Gordobil, O., Herrera, R., Abderrabba, M., & Labidi, J. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.09.001 · Cited by 85
Liu, Y., He, H., Tian, G., Wang, Y., Gao, J., Wang, C., Li, X., & Zhang, H. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108956 · Cited by 85
Functionalized Polymers from Lignocellulosic Biomass: State of the Art
Ten, E., & Vermerris, W. (2013) · Polymers · doi:10.3390/polym5020600 · Cited by 100
“The use of different microbial strains enables the production of chemical feedstocks that can be used for the production of bio-based products, including polymers, with poly-lactic acid (PLA) used for bio-degradable plastics currently representing the main application [28,29].”
BackgroundAmbrosio‐Martín, J., Fabra, M. J., López‐Rubio, A., & Lagaron, J. M. (2015) · Cellulose · doi:10.1007/s10570-014-0523-9 · Cited by 92
Limsukon, W., Auras, R. A., & Selke, S. E. M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106108 · Cited by 86
Zhang, Z., Lv, Q., Gao, X., Chen, L., Cao, Y. Z., Yu, S., He, C., & Chen, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01213 · Cited by 81
Recent Advancements and Perspectives of Biodegradable Polymers for Supercapacitors
Wu, L. H., Shi, X., & Wu, Z. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202211454 · Cited by 86
Effects of interfacial stereocomplexation in cellulose nanocrystal-filled polylactide nanocomposites
Habibi, Y., Aouadi, S., Raquez, J., & Dúbois, P. (2013) · Cellulose · doi:10.1007/s10570-013-0058-5 · Cited by 82
Biodegradable Plastic Mulch Films for Sustainable Specialty Crop Production
Hayes, D. G., Anunciado, M. B., DeBruyn, J. M., Bandopadhyay, S., Schaeffer, S. M., English, M., Ghimire, S., Miles, C. A., Flury, M., & Sintim, H. Y. (2019) · Springer eBooks · doi:10.1007/978-3-030-19416-1_11 · Cited by 98
Chen, C., Law, W., Aalinkeel, R., Nair, B., Kopwitthaya, A., Mahajan, S. D., Reynolds, J. L., Zou, J., Schwartz, S. A., Prasad, P. N., et al. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200094 · Cited by 82
Yang, Y., Wang, H., & Ma, H. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b00558 · Cited by 80
Liang, Y., Xu, J., Liu, X., Zhong, G., & Li, Z. (2013) · Polymer · doi:10.1016/j.polymer.2013.09.027 · Cited by 79
Guerin, W., Helou, M., Carpentier, J.-F., Slawinski, M., Brusson, J.-M., & Guillaume, S. M. (2013) · Polym. Chem. · doi:10.1039/c2py20859h · Cited by 75
Square-Planar Cu(II) Diketiminate Complexes in Lactide Polymerization
Whitehorne, T. J. J., & Schaper, F. (2013) · Inorganic Chemistry · doi:10.1021/ic402133c · Cited by 77
Poly(lactic acid)-Based Blends: A Comprehensive Review
ВАЙШБЕЙН, Л. И., Mastalygina, E. E., Olkhov, A. A., & Podzorova, M. V. (2023) · Applied Sciences · doi:10.3390/app13085148 · Cited by 82
Foaming of PLA Composites by Supercritical Fluid-Assisted Processes: A Review
Jiménez, J. A. V., Moigne, N. L., Bénézet, J., Sauceau, M., Sescousse, R., & Fages, J. (2020) · Molecules · doi:10.3390/molecules25153408 · Cited by 77
“It is well known that up until recent decades, the main uses of PLA have been limited to medical applications [50], but its interesting properties have made it the most studied biopolymer [52,55,56], and consequently generated a great amount of interest in different industrial fields [50,53,57,58].”
BackgroundControlled drug release through regulated biodegradation of poly(lactic acid) using inorganic salts
Kumar, S., Singh, S., Senapati, S., Singh, A. P., Ray, B., & Maiti, P. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.06.033 · Cited by 77
Strategies for the synthesis of block copolymers with biodegradable polyester segments
Diaz, C., & Mehrkhodavandi, P. (2021) · Polymer Chemistry · doi:10.1039/d0py01534b · Cited by 74
Metadata
- Authors
- Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A.
- Affiliations
- Åbo Akademi University (FI)
- KTH Royal Institute of Technology (SE)
- Corresponding author
- Södergård, Anders
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-18
- Volume
- 12
- Issue
- 3
- Pages
- 523-532
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2003081124
- Cited by
- 710
- References
- 148
- Citations by year
- 2026: 33 · 2025: 46 · 2024: 46 · 2023: 46 · 2022: 57 · 2021: 49 · 2020: 48 · 2019: 49 · 2018: 54 · 2017: 57 · 2016: 54 · 2015: 47 · 2014: 34 · 2013: 40 · 2012: 40
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Keywords
- polylactic acid, lactic acid, lactide, polymerization, polymer processing, quality assessment, characterization techniques, biodegradable polymers
- MeSH terms
- Drug Contamination, Polyesters, Polymers, Quality Control, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.