Long-Term Strategies for Increased Recycling of Automotive Aluminum and Its Alloying Elements
The DOI matches its Crossref record; 26 of the 28 references it cites were found in a registry or an index.
Abstract
Aluminum recycling currently occurs in a cascading fashion, where some alloys, used in a limited number of applications, absorb most of the end-of-life scrap. An expected increase in scrap supply in coming decades necessitates restructuring of the aluminum cycle to open up new recycling paths for alloys and avoid a potential scrap surplus. This paper explores various interventions in end-of-life management and recycling of automotive aluminum, using a dynamic substance flow analysis model of aluminum and its alloying elements with resolution on component and alloy level (vehicle-component-alloy-element model). It was found that increased component dismantling before vehicle shredding can be an effective, so far underestimated, intervention in the medium term, especially if combined with development of safety-relevant components such as wheels from secondary material. In the long term, automatic alloy sorting technologies are most likely required, but could at the same time reduce the need for magnesium removal in refining. Cooperation between the primary and secondary aluminum industries, the automotive industry, and end-of-life vehicle dismantlers is therefore essential to ensure continued recycling of automotive aluminum and its alloying elements.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“| | | ↑50% metals fleet (Al replacing steel) [153, 154] | | | | → ↑fuel efficiency standards |”
From Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review (2019) · cites this paper as [154]
Experimental — accuracy not yet measuredIn the citing paper
“Through alloy-specific recycling of the aluminum components, the additional energy use for producing aluminum components can be more than offset [154].”
From Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review (2019) · cites this paper as [154]
In the citing paper
“| | | ↓50% Al in fleet [153, 154] | | | | |”
From Material efficiency strategies to reducing greenhouse gas emissions associated with buildings, vehicles, and electronics—a review (2019) · cites this paper as [154]
In the citing paper
“Light-weighting of passenger cars by material substitution can be a”
From Global Carbon Benefits of Material Substitution in Passenger Cars until 2050 and the Impact on the Steel and Aluminum Industries (2014) · cites this paper as [57]
Citations
Cites
Recent development in aluminium alloys for the automotive industry
Miller, W. S., Zhuang, L., Bottema, J., Wittebrood, A. J., De Smet, P., Haszler, A., & Vieregge, A. (2000) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(99)00653-x · Cited by 2,498
Improving aluminum recycling: A survey of sorting and impurity removal technologies
Gaustad, G., Olivetti, E., & Kirchain, R. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.10.010 · Cited by 412
Stock dynamics and emission pathways of the global aluminium cycle
Liu, G., Bangs, C. E., & Müller, D. B. (2013) · Nature Climate Change · doi:10.1038/nclimate1698 · Cited by 304
Self-citationThermodynamic Analysis of Contamination by Alloying Elements in Aluminum Recycling
Nakajima, K., Takeda, O., Miki, T., Matsubae, K., Nakamura, S., & Nagasaka, T. (2010) · Environmental Science & Technology · doi:10.1021/es9038769 · Cited by 168
Centennial Evolution of Aluminum In-Use Stocks on Our Aluminized Planet
Liu, G., & Müller, D. B. (2013) · Environmental Science & Technology · doi:10.1021/es305108p · Cited by 144
Self-citationHatayama, H., Daigo, I., Matsuno, Y., & Adachi, Y. (2012) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2012.06.006 · Cited by 139
The role of automobiles for the future of aluminum recycling
Modaresi, R., & Müller, D. B. (2012) · Environmental Science & Technology · doi:10.1021/es300648w · Cited by 138
Self-citationBriskham, P., Blundell, N., Li, H., Hewitt, R., Young, K. W., & Boomer, D. R. (2006) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2006-01-0774 · Cited by 113
Stock dynamics and emission pathways of the global aluminum cycle
Müller, D. B., Liu, G., & Bangs, C. E. (2013) · Springer eBooks · doi:10.1007/978-3-319-48763-2_19 · Cited by 108
Self-citationThe development of recycle-friendly automotive aluminum alloys
Das, S. K., Green, J. A. S., & Kaufman, J. G. (2007) · JOM · doi:10.1007/s11837-007-0140-2 · Cited by 89
Research works printed but not linked: 9
- International Aluminium Institute, 2011, Global Aluminium Recycling Committee, Global Aluminium Recycling Model (GARC)
- Rombach, G.,Future availability of aluminium scrap. InLight Metals, Proceedings of the 131st TMS Annual Meeting;Schneider, W. A., Ed. Seattle, WA, 2002; pp1011–1018.
- Das, S.; Green, J.,The recycling of aluminum from building and construction applications. InLight Metals, Proceedings of the 137th TMS Annual Meeting & Exhibition,DeYoung, D. H., Ed.; New Orleans, LA, 2008; pp1113–1118.
- Gesing, A.; Harbeck, H.,Particle sorting of light-metal alloys and expanded use of manufacturing scrap in automotive, marine and aerospace markets. InProceedings of REWAS 2008, Global Symposium on Recycling, Waste Treatment and Clean Technology,Mishra, B.; Ludwig, C.; Das, S., Eds.; Cancun, Mexico, 2008.
- Furrer P., 2003, SAE Technical paper series, 2003, 319
- Altenpohl D., 1998, Aluminum: Technology, Applications, and Environment: a Profile of a Modern Metal
- Briskham P., 2006, SAE Tech. Pap. Ser., 2006
- Verbrugge M. W., 2010, Light Metals, Proceedings of the technical sessions presented by the TMS Aluminium Committee at the TMS 2010 Annual Meeting & Exhibition
- Fragner W., 2014, Light Metals 2014
Cited by
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Pauliuk, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.019 · Cited by 554
Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., et al. (2019) · Environmental Research Letters · doi:10.1088/1748-9326/ab0fe3 · Cited by 477
Solid Waste and the Circular Economy: A Global Analysis of Waste Treatment and Waste Footprints
Tisserant, A., Pauliuk, S., Merciai, S., Schmidt, J., Fry, J., Wood, R., & Tukker, A. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12562 · Cited by 376
Czerwinski, F. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03892-z · Cited by 244
Ziemann, S., Müller, D. B., Schebek, L., & Weil, M. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.031 · Cited by 212
Self-citationNiero, M., & Olsen, S. I. (2016) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.023 · Cited by 176
A solid-state electrolysis process for upcycling aluminium scrap
Lu, X., Zhang, Z., Hiraki, T., Takeda, O., Zhu, H., Matsubae, K., & Nagasaka, T. (2022) · Nature · doi:10.1038/s41586-022-04748-4 · Cited by 173
Li, X., Shi, T., Li, B., Chen, X., Zhang, C., Guo, Z., & Zhang, Q. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108152 · Cited by 171
Does material circularity rhyme with environmental efficiency? Case studies on used tires
Lonca, G., Muggéo, R., Imbeault‐Tétreault, H., Bernard, S., & Margni, M. D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.108 · Cited by 186
Sverdrup, H. U., Ragnarsdottir, K. V., & Koca, D. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.085 · Cited by 159
Modaresi, R., Pauliuk, S., Løvik, A. N., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es502930w · Cited by 137
Self-citationPauliuk, S., Kondo, Y., Nakamura, S., & Nakajima, K. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.09.029 · Cited by 126
Circular economy framework for automobiles: Closing energy and material loops
Esteva, L. C. A., Kasliwal, A., Kinzler, M. S., Kim, H. C., & Keoleian, G. A. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.13088 · Cited by 155
Sverdrup, H. U., Ragnarsdottir, K. V., & Koca, D. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.06.008 · Cited by 132
Improving supply security of critical metals: Current developments and research in the EU
Løvik, A. N., Hagelüken, C., & Wäger, P. A. (2018) · Sustainable materials and technologies · doi:10.1016/j.susmat.2018.01.003 · Cited by 128
Self-citationPauliuk, S., & Heeren, N. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12952 · Cited by 129
Shen, A., & Zhang, J. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113965 · Cited by 120
Bertram, M., Ramkumar, S., Rechberger, H., Rombach, G., Bayliss, C., Martchek, K. J., Müller, D. B., & Liu, G. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.05.014 · Cited by 116
Self-citationHelbig, C., Huether, J., Joachimsthaler, C., Lehmann, C. W., Raatz, S., Thorenz, A., Faulstich, M., & Tuma, A. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13289 · Cited by 118
Nakamura, S., Kondo, Y., Nakajima, K., Ohno, H., & Pauliuk, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b01683 · Cited by 96
Aluminium use in passenger cars poses systemic challenges for recycling and GHG emissions
Billy, R. G., & Müller, D. B. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106827 · Cited by 95
Self-citationAssessment of strategic raw materials in the automobile sector
Ortego, A., Calvo, G., Valero, A., Iglesias-Émbil, M., Valero, A., & Villacampa, M. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104968 · Cited by 97
Raabe, D., Klug, M. J., Ponge, D., Gramlich, A., da Silva, A. K., Grundy, A. N., Springer, H., Filho, I. R. D. S., & Ma, Y. (2024) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080222-123648 · Cited by 98
Dai, M., Wang, P., Chen, W., & Liu, G. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.029 · Cited by 88
Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm
Krall, P., Weißensteiner, I., & Pogatscher, S. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107370 · Cited by 82
Resource pressure – A circular design method
Desing, H., Braun, G., & Hischier, R. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.105179 · Cited by 86
Vehicles and Critical Raw Materials: A Sustainability Assessment Using Thermodynamic Rarity
Ortego, A., Valero, A., Valero, A., & Restrepo, E. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12737 · Cited by 74
Adding Value to Secondary Aluminum Casting Alloys: A Review on Trends and Achievements
Nunes, H., Emadinia, O., Soares, R., Vieira, M. F., & Reis, A. R. (2023) · Materials · doi:10.3390/ma16030895 · Cited by 73
A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications
Cinkilic, E., Moodispaw, M. P., Zhang, J., Miao, J., & Luo, A. A. (2022) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-022-06711-4 · Cited by 72
Stocks, Flows, and Distribution of Critical Metals in Embedded Electronics in Passenger Vehicles
Restrepo, E., Løvik, A. N., Wäger, P., Widmer, R., Lonka, R., & Müller, D. B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b05743 · Cited by 71
Self-citationThe coming wave of aluminum sheet scrap from vehicle recycling in the United States
Zhu, Y., Chappuis, L. B., Kleine, R. D. D., Kim, H. C., Wallington, T. J., Luckey, G. W., & Cooper, D. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.105208 · Cited by 76
Industrial Sustainability: Reviewing the Past and Envisioning the Future
Sutherland, J. W., Skerlos, S. J., Haapala, K. R., Cooper, D., Zhao, F., & Huang, A. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047620 · Cited by 72
Ohno, H., Matsubae, K., Nakajima, K., Kondo, Y., Nakamura, S., Fukushima, Y., & Nagasaka, T. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b04477 · Cited by 67
Downcycling in automobile recycling process: A thermodynamic assessment
Ortego, A., Valero, A., Valero, A., & Iglesias-Émbil, M. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.006 · Cited by 73
Closing the low-carbon material loop using a dynamic whole system approach
Busch, J., Dawson, D., & Roelich, K. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.166 · Cited by 53
Raw material use in a battery electric car – a thermodynamic rarity assessment
Iglesias-Émbil, M., Valero, A., Ortego, A., Villacampa, M., Vilaró, J., & Villalba, G. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104820 · Cited by 65
Econometric modeling of recycled copper supply
Fu, X., Ueland, S. M., & Olivetti, E. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.02.012 · Cited by 61
Deriving the Metal and Alloy Networks of Modern Technology
Ohno, H., Nuss, P., Chen, W.-Q., & Graedel, T. E. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b05093 · Cited by 53
Palazzo, J., & Geyer, R. (2019) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2018.12.001 · Cited by 52
Quo vadis MFA? Integrated material flow analysis to support material efficiency
Baars, J., Rajaeifar, M. A., & Heidrich, O. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13288 · Cited by 56
Wang, B., Zhang, Z., Xu, G., Zeng, X., Hu, W., & Matsubae, K. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.106877 · Cited by 50
Rolseth, A., Carlson, M., Ghassemali, E., Caro, L. P., & Jarfors, A. E. W. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107532 · Cited by 53
Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market
Nguyen, R. T., Imholte, D. D., Rios, O. R., Weiss, D. J., Sims, Z. C., Stromme, E. T., & McCall, S. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.009 · Cited by 52
In-depth analysis of aluminum flows in Austria as a basis to increase resource efficiency
Buchner, H., Laner, D., Rechberger, H., & Fellner, J. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.09.016 · Cited by 49
Cao, Z., Liu, G., Zhong, S., Dai, H., & Pauliuk, S. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.8b03633 · Cited by 44
Prospective Models of Society’s Future Metabolism: What Industrial Ecology Has to Contribute
Pauliuk, S., & Hertwich, E. G. (2015) · Springer eBooks · doi:10.1007/978-3-319-20571-7_2 · Cited by 42
Pedneault, J., Majeau‐Bettez, G., Pauliuk, S., & Margni, M. D. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13321 · Cited by 41
Material Stock Demographics: Cars in Great Britain
Cabrera Serrenho, A., & Allwood, J. M. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b05012 · Cited by 38
Yang, C., Zhang, L., Chen, Z., Gao, Y., & Xu, Z. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130544 · Cited by 37
Buchner, H., Laner, D., Rechberger, H., & Fellner, J. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.01.014 · Cited by 35
Tan, J., Wehde, M. V., Brønd, F., & Kalvig, P. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.105242 · Cited by 37
Paraskevas, D., Ingarao, G., Deng, Y., Duflou, J. R., Pontikes, Y., & Blanpain, B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.097 · Cited by 32
Du, S., Zhang, S., Wang, J., Lv, Z., Xu, Z., Liu, C., Liu, J., & Liu, J. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141176 · Cited by 29
Dardor, D., Florez-Orrego, D. A., Germanier, R., Margni, M. D., & Marechal, F. M. A. (2025) · Energy Strategy Reviews · doi:10.1016/j.esr.2025.101853 · Cited by 32
Recycling of additive manufactured AlSi10Mg and its effect on mechanical properties
Coşkun, M., Dizdar, K. C., Tarakçı, G., Özer, G., & Dışpınar, D. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126411 · Cited by 29
Fitness of product and service design for closed-loop material recycling: A framework and indicator
Hummen, T., & Sudheshwar, A. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106661 · Cited by 32
Driving vehicle dismantling forward - A combined literature and empirical study
Tarrar, M., Despeisse, M., & Johansson, B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126410 · Cited by 30
Resource effectiveness of the European automotive sector – a statistical entropy analysis over time
Parchomenko, A., Nelen, D., Gillabel, J., Vrancken, K. C., & Rechberger, H. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105558 · Cited by 28
Xi, X., & Chung, D. D. L. (2019) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2019.02.013 · Cited by 26
Bridging the gap: Enhancing mitigation ambition and action at G20 level and globally
United Nations Environment Programme (2019) · The emissions gap report · doi:10.18356/9789210022262c008 · Cited by 22
Mobilizing materials to enable a fast energy transition: A conceptual framework
Desing, H., Widmer, R., Bardi, U., Beylot, A., Billy, R. G., Gasser, M., Gauch, M., Monfort, D., Müller, D. B., Raugei, M., et al. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107314 · Cited by 22
Self-citationThe beginning and the end of the aluminium value chain
Kolbeinsen, L. (2020) · Matériaux & Techniques · doi:10.1051/mattech/2021008 · Cited by 23
Quality Evaluation of Remelted A356 Scraps
Yüksel, Ç., Tamer, O., Erzi, E., Aybarç, U., Çubuklusu, H. E., Topçuoğlu, Ö. Y., Çiğdem, M., & Dispinar, D. (2016) · Archives of Foundry Engineering · doi:10.1515/afe-2016-0069 · Cited by 20
Agarwal, M., & Srivastava, R. (2018) · Materials and Manufacturing Processes · doi:10.1080/10426914.2018.1512124 · Cited by 20
Ortego, A., Valero, A., Valero, A., & Iglesias-Émbil, M. (2018) · SAE International Journal of Materials and Manufacturing · doi:10.4271/05-11-03-0021 · Cited by 20
Simultaneously tracing the fate of seven metals at a global level with MaTrace‐multi
Helbig, C., Kondo, Y., & Nakamura, S. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13219 · Cited by 20
How much sorting is required for a circular low carbon aluminum economy?
Pedneault, J., Majeau‐Bettez, G., & Margni, M. D. (2023) · Journal of Industrial Ecology · doi:10.1111/jiec.13388 · Cited by 20
A review of research progress in upcycling technology for scrap aluminum alloys
Guo, B., Wang, Y., Qiao, J., Peng, J., Di, Y., Wang, C., & Wang, K. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2025.107588 · Cited by 18
Tu, Q., & Hertwich, E. G. (2021) · Journal of Industrial Ecology · doi:10.1111/jiec.13223 · Cited by 18
Bridging the Gap – Enhancing mitigation ambition and action at G20 level and globally
Rogelj, J., & den Elzen, M. G. J. (2019) · IIASA PURE (International Institute of Applied Systems Analysis) · Cited by 17
Jarrin Jacome, M. G., Godoy León, M. F., Freitas de Alvarenga, R., & Dewulf, J. P. (2013) · Resources · doi:10.3390/resources · Cited by 17
Causal inference for quantifying displaced primary production from recycling
Palazzo, J., Geyer, R., Startz, R., & Steigerwald, D. G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.006 · Cited by 16
Low- and High-Pressure Casting Aluminum Alloys: A Review
Nunes, H., Emadinia, O., Vieira, M. F., & Reis, A. R. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.109869 · Cited by 14
Faraji, M., Karimi, S., Esmailzadeh, M., & Pezzato, L. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-07807-7 · Cited by 14
Yoon, T.-J., Jung, B.-H., & Kang, C.-Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.063 · Cited by 14
Dissolution Characteristics of Al-Si Alloys in AlCl3-NaCl-KCl Molten Salt at 423 K
Shoki, O. Y. A., Nunomura, J., Matsushima, H., Kyo, Y., KOJIMA, Y., & Ueda, M. (2022) · Electrochemistry · doi:10.5796/electrochemistry.22-00115 · Cited by 13
Langhorst, M., Billy, R. G., Schwotzer, C., Kaiser, F., & Müller, D. B. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.4c00976 · Cited by 13
Self-citationThe Collapse of the Global Consumption Model: in Search of Sustainability
Бобылев, С. Н., Solovyeva, S., & Kiryushin, P. (2022) · World Economy and International Relations · doi:10.20542/0131-2227-2022-66-11-92-100 · Cited by 16
Yang, Q., Zhao, Z., Dong, Y., Liu, Y., Liu, X., Tang, Y., Wang, Y., Wang, X., & Qiu, J. (2016) · ChemElectroChem · doi:10.1002/celc.201600497 · Cited by 13
Zhu, Y., Khan, O., Heidari, S. M., Tsai, A., Chappuis, L. B., Chiriac, C., Freiberg, D. S., Hamid, A., Kim, H. C., Kleine, R. D. D., et al. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108199 · Cited by 12
Sustainable extraction and recycling of non-ferrous metals: a review from a European perspective
Gerold, E., Luznik, L., Samberger, S., & Antrekowitsch, H. (2024) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0173 · Cited by 15
Die-cast Al–Si–Cu alloy (ADC12) as a phase change material for medium–high-temperature heat storage
Shimizu, Y., & Nomura, T. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.179006 · Cited by 11
Heidari, M., Zhu, Y., Tsai, A., Keoleian, G. A., Kim, H. C., Kleine, R. D. D., Kelly, J., Shukla, S., & Cooper, D. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108654 · Cited by 12
da Silva, C. A. P., Barros, A. D. S., Rodrigues, A. V., Kakitani, R., Soares, T., Garcia, A., & Cheung, N. (2022) · Sustainability · doi:10.3390/su142113859 · Cited by 10
Influence of Different Fe Levels on Mechanical Properties of AlSi7Mg0.3 Aluminum Casting Alloys
Karabulut, C., Malkoç, G., Kaya, A. Y., Özaydın, O., & Yayla, P. (2023) · International Journal of Metalcasting · doi:10.1007/s40962-023-01227-y · Cited by 10
Alloy selective optical sorting of mixed post-consumer aluminum scrap streams
Efe, M., Rohatgi, A., Dai, Q., Stapleton, B., Rader, K. E., Lipson, A. L., & Spangenberger, J. S. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108500 · Cited by 9
Tracking the Fate of Aluminium in the EU Using the MaTrace Model
Jácome, G. J., León, M. F. G., Alvarenga, R. A. F., & Dewulf, J. P. (2021) · Resources · doi:10.3390/resources10070072 · Cited by 9
Synthesis of Nanostructured Alumina from Byproduct Aluminum Filings: Production and Characterization
Esaifan, M., Al-Mobydeen, A., Al-Masri, A. N., Altwaiq, A. M., Al-Saqarat, B., Mahmoud, W., Hamaideh, A., Moosa, I. S., Hamadneh, I., & AlShamaileh, E. M. (2023) · Inorganics · doi:10.3390/inorganics11090355 · Cited by 10
Efe, M., Rader, K. E., Overman, N. R., Nasim, W., Ortiz, Á. L., Soulami, A., & Choi, K. S. (2024) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2024.118709 · Cited by 8
Recent Advancements in Aluminum Alloys
Rajendrachari, S. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.103993 · Cited by 8
Pauliuk, S. (2020) · SocArXiv (OSF Preprints) · doi:10.31235/osf.io/y4xcv · Cited by 11
Excessive Fe Contamination in Secondary Al Alloys: Microstructure, Porosity, and Corrosion Behaviour
Nunes, H., Madureira, R., Vieira, M. F., Reis, A. R., & Emadinia, O. (2025) · Metals · doi:10.3390/met15040451 · Cited by 7
Pascual, S. A., Ortego, A., Villanueva, N., van Schaik, A., Reuter, M. A., Iglesias-Émbil, M., & Valero, A. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145725 · Cited by 7
Pastor-Vallés, E., Llamas, A. A., & Pettersen, J. B. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c04666 · Cited by 7
Direct aluminium-alloy upcycling from entire end-of life vehicles
Krall, P., Weißensteiner, I., Aster, P., Dumitraschkewitz, P., Tunes, M. A., Kremmer, T., Samberger, S., Trink, B., & Pogatscher, S. (2026) · Nature Communications · doi:10.1038/s41467-026-69492-z · Cited by 7
Effects of car electronics penetration, integration and downsizing on their recycling potentials
Restrepo, E., Løvik, A. N., Widmer, R., Wäger, P. A., & Müller, D. B. (2020) · Resources Conservation & Recycling X · doi:10.1016/j.rcrx.2020.100032 · Cited by 9
Self-citationSchlesinger, M. E. (2018) · ASM International eBooks · doi:10.31399/asm.hb.v02a.a0006484 · Cited by 7
Holzschuh, G. G., Moraes, J. A. R., Garcia, S. B., Zanesco, I., Schneider, R. D. C. D. S., & Kipper, L. M. (2022) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-022-00552-6 · Cited by 6
Allocation Procedures for Generic Cascade Use Cases - An Evaluation Using Monte Carlo Analysis
Rehberger, M., & Hiete, M. (2019) · Materials science forum · doi:10.4028/www.scientific.net/msf.959.32 · Cited by 5
Metadata
- Authors
- Løvik, A. N., Modaresi, R., & Müller, D. B.
- Affiliations
- Norwegian University of Science and Technology (NO)
- Corresponding author
- Løvik, Amund N.
- Müller, Daniel B.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-04-02
- Volume
- 48
- Issue
- 8
- Pages
- 4257-4265
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2323688192
- Cited by
- 136
- References
- 28
- Citations by year
- 2026: 10 · 2025: 16 · 2024: 16 · 2023: 18 · 2022: 17 · 2021: 4 · 2020: 10 · 2019: 11 · 2018: 10 · 2017: 9 · 2016: 7 · 2015: 4 · 2014: 3
- FWCI
- 12.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Environmental Science › Waste Management and Disposal › Municipal Solid Waste Management
- Keywords
- end-of-life vehicles, alloying elements, magnesium removal, recycled aluminum, recycling pathway
- MeSH terms
- Alloys, Aluminum, Automobiles, Computer Simulation, Time Factors, Recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.