The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Abstract
Stabilizing the polysulfide shuttle while ensuring high sulfur loading holds the key to realizing high theoretical energy of lithium-sulfur (Li-S) batteries. Herein, we present an electrocatalysis approach to demonstrate preferential adsorption of a soluble polysulfide species, formed during discharge process, toward the catalyst anchored sites of graphene and their efficient transformation to long-chain polysulfides in the subsequent redox process. Uniform dispersion of catalyst nanoparticles on graphene layers has shown a 40% enhancement in the specific capacity over pristine graphene and stability over 100 cycles with a Coulombic efficiency of 99.3% at a current rate of 0.2 C. Interaction between electrocatalyst and polysulfides has been evaluated by conducting X-ray photoelectron spectroscopy and electron microscopy studies at various electrochemical conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Cited by
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Li, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries
Shen, Z., Jin, X., Tian, J., Li, M., Yuan, Y., Zhang, S., Fang, S., Fan, X., Xu, W., Lu, H., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00804-4 · Cited by 621
A novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Porous membranes in secondary battery technologies
Lu, W., Yuan, Z., Zhao, Y., Zhang, H., Zhang, H., & Li, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00823b · Cited by 479
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.046 · Cited by 422
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Propelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Xu, Z.-L., Lin, S., Onofrio, N., Zhou, L., Shi, F., Lu, W., Kang, K., Zhang, Q., & Lau, S. P. (2018) · Nature Communications · doi:10.1038/s41467-018-06629-9 · Cited by 391
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08681 · Cited by 386
Self-citationMultifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Zhao, M., Peng, H., Zhang, Z., Li, B., Chen, X., Xie, J., Chen, X., Wei, J., Zhang, Q., & Huang, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812062 · Cited by 364
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
A Review of Heteroatom Doped Materials for Advanced Lithium–Sulfur Batteries
Wang, J., & Han, W. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107166 · Cited by 351
Cao, J., Chen, C., Zhao, Q., Zhang, N., Lu, Q., Wang, X., Niu, Z., & Chen, J. (2016) · Advanced Materials · doi:10.1002/adma.201602262 · Cited by 339
Chen, K., Sun, Z., Fang, R., Shi, Y., Cheng, H., & Li, F. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707592 · Cited by 339
Zhou, F., Li, Z., Luo, X., Wu, T., Jiang, B., Lu, L.-L., Yao, H.-B., Antonietti, M., & Yu, S.-H. (2018) · Nano Letters · doi:10.1021/acs.nanolett.7b04505 · Cited by 316
Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312
Lei, J., Fan, X.-X., Liu, T., Xu, P., Hou, Q., Li, K., Yuan, R.-M., Zheng, M.-S., Dong, Q.-F., & Chen, J.-J. (2022) · Nature Communications · doi:10.1038/s41467-021-27866-5 · Cited by 308
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Exploring and Understanding the Roles of Li2Sn and the Strategies to beyond Present Li-S Batteries
Lei, J., Liu, T., Chen, J., Zheng, M., Zhang, Q., Mao, B., & Dong, Q. (2020) · Chem · doi:10.1016/j.chempr.2020.06.032 · Cited by 268
Metadata
- Authors
- Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-08
- Volume
- 137
- Issue
- 36
- Pages
- 11542-11545
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2272188882
- Cited by
- 753
- References
- 1
- FWCI
- 25.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.