The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Stable Li Plating/Stripping Electrochemistry Realized by a Hybrid Li Reservoir in Spherical Carbon Granules with 3D Conducting Skeletons
Abstract
Lithium metal is a promising battery anode. However, inhomogeneous mass and charge transfers across the Li/electrolyte interface result in formation of dendritic Li and "dead" Li, and an unstable solid electrolyte interphase, which incur serious problems to impede its service in rechargeable batteries. Here, we show that the above problems can be mitigated by regulating the interfacial mass/charge transfer. The key to our strategy is hybrid Li storage in onion-like, graphitized spherical C granules wired on a three-dimensional conducting skeleton, which enhances the negativity of surface charge of the C host to contribute to a uniform Li plating while also forming stable Li/C intercalation compounds to offset any irreversible Li loss during cycling. As a result, the anode shows a suppressed dendrite formation and a high Li utilization >95%, enabling a practical Li battery to strike a long lifespan of 1000 cycles at a surplus Li of merely 5%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
An ultrafast rechargeable aluminium-ion battery
Lin, M.-C., Gong, M., Lu, B., Wu, Y., Wang, D.-Y., Guan, M., Angell, M., Chen, C., Yang, J., Hwang, B.-J., et al. (2015) · Nature · doi:10.1038/nature14340 · Cited by 2,491
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
A Metal-Organic Framework Host for Highly Reversible Dendrite-free Zinc Metal Anodes
Wang, Z., Huang, J., Guo, Z., Dong, X., Liu, Y., Wang, Y., & Xia, Y. (2019) · Joule · doi:10.1016/j.joule.2019.02.012 · Cited by 938
Gao, Y., Yan, Z., Gray, J. L., He, X., Wang, D., Chen, T., Huang, Q., Li, Y. C., Wang, H., Kim, S. H., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0305-8 · Cited by 790
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Self-citationTowards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Self-citationStrategies for Dendrite‐Free Anode in Aqueous Rechargeable Zinc Ion Batteries
Cao, Z., Zhuang, P., Zhang, X., Ye, M., Shen, J., & Ajayan, P. M. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001599 · Cited by 627
Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions
Niu, C., Pan, H., Xu, W., Xiao, J., Zhang, J.-G., Luo, L., Wang, C., Mei, D., Meng, J., Wang, X., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0427-9 · Cited by 589
Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries
Liu, F.-Q., Wang, W.-P., Yin, Y.-X., Zhang, S.-F., Shi, J.-L., Wang, L., Zhang, X.-D., Zheng, Y., Zhou, J.-J., Li, L., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat5383 · Cited by 556
Self-citationLiu, L., Yin, Y., Li, J., Wang, S., Guo, Y., & Wan, L. (2018) · Advanced Materials · doi:10.1002/adma.201706216 · Cited by 538
Self-citationLei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Li, G., Liu, Z., Huang, Q., Gao, Y., Regula, M., Wang, D., Chen, L.-Q., & Wang, D. (2018) · Nature Energy · doi:10.1038/s41560-018-0276-z · Cited by 444
Li, D., Chen, L., Wang, T., & Fan, L.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18123 · Cited by 398
Solid–Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode
Jin, S., Ye, Y., Niu, Y., Xu, Y., Jin, H., Wang, J., Sun, Z., Cao, A., Wu, X., Luo, Y., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c01811 · Cited by 391
Self-citationConductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits
Pu, J., Li, J., Zhang, K., Zhang, T., Li, C., Ma, H., Zhu, J., Braun, P. V., Lu, J., & Zhang, H. (2019) · Nature Communications · doi:10.1038/s41467-019-09932-1 · Cited by 387
Self-citationElectrode material–ionic liquid coupling for electrochemical energy storage
Wang, X., Salari, M., Jiang, D.-E., Chapman Varela, J., Anasori, B., Wesolowski, D. J., Dai, S., Grinstaff, M. W., & Gogotsi, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0218-9 · Cited by 387
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
Zou, P., Sui, Y., Zhan, H., Wang, C., Xin, H. L., Cheng, H.-M., Kang, F., & Yang, C. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01100 · Cited by 368
Chen, S., Dai, F., & Cai, M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01545 · Cited by 362
Ye, H., Zheng, Z., Yao, H., Liu, S., Zuo, T., Wu, X., Yin, Y., Li, N., Gu, J., Cao, F., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811955 · Cited by 360
Self-citationLithiophilic LiC6 Layers on Carbon Hosts Enabling Stable Li Metal Anode in Working Batteries
Shi, P., Li, T., Zhang, R., Shen, X., Cheng, X., Xu, R., Huang, J., Chen, X., Liu, H., & Zhang, Q. (2019) · Advanced Materials · doi:10.1002/adma.201807131 · Cited by 352
Crumpled Graphene Balls Stabilized Dendrite-free Lithium Metal Anodes
Liu, S., Wang, A., Li, Q., Wu, J., Chiou, K., Huang, J., & Luo, J. (2018) · Joule · doi:10.1016/j.joule.2017.11.004 · Cited by 347
Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Toward Practical High-Energy and High-Power Lithium Battery Anodes: Present and Future
Wang, C., Yang, C., & Zheng, Z. (2022) · Advanced Science · doi:10.1002/advs.202105213 · Cited by 337
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Self-citationHuang, G., Han, J., Zhang, F., Wang, Z., Kashani, H., Watanabe, K., & Chen, M. (2019) · Advanced Materials · doi:10.1002/adma.201805334 · Cited by 313
Gao, Y., Zhao, Y., Li, Y. C., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06437 · Cited by 297
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Self-citationReview—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Nucleation and Growth Mechanism of Lithium Metal Electroplating
Thirumalraj, B., Hagos, T. T., Huang, C.-J., Teshager, M. A., Cheng, J.-H., Su, W.-N., & Hwang, B.-J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10195 · Cited by 273
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes
Ye, H., Xin, S., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700530 · Cited by 261
Self-citationRecent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries
Zhang, X.-Q., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2018) · Engineering · doi:10.1016/j.eng.2018.10.008 · Cited by 259
Metadata
- Authors
- Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-14
- Volume
- 139
- Issue
- 16
- Pages
- 5916-5922
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2604559385
- Cited by
- 451
- References
- 47
- FWCI
- 28.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.