The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium–Sulfur Batteries
Abstract
Lithium–sulfur batteries (Li–S) have attracted soaring attention due to the particularly high energy density for advanced energy storage system. However, the practical application of Li–S batteries still faces multiple challenges, including the shuttle effect of intermediate polysulfides, the low conductivity of sulfur and the large volume variation of sulfur cathode. To overcome these issues, here we reported a self-templated approach to prepare interconnected carbon nanotubes inserted/wired hollow Co 3 S 4 nanoboxes (CNTs/Co 3 S 4 –NBs) as an efficient sulfur host material. Originating from the combination of three-dimensional CNT conductive network and polar Co 3 S 4 –NBs, the obtained hybrid nanocomposite of CNTs/Co 3 S 4 –NBs can offer ultrahigh charge transfer properties, and efficiently restrain polysulfides in hollow Co 3 S 4 –NBs via the synergistic effect of structural confinement and chemical bonding. Benefiting from the above advantages, the S@CNTs/Co 3 S 4 –NBs cathode shows a significantly improved electrochemical performance in terms of high reversible capacity, good rate performance, and long-term cyclability. More remarkably, even at an elevated temperature (50 °C), it still exhibits high capacity retention and good rate capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Self-citationUnderstanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
Song, J., Gordin, M. L., Xu, T., Chen, S., Yu, Z., Sohn, H., Lu, J., Ren, Y., Duan, Y., & Wang, D. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411109 · Cited by 776
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Zheng, G., Zhang, Q., Cha, J. J., Yang, Y., Li, W., Seh, Z. W., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl304795g · Cited by 705
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium–sulfur batteries
Li, Z., Zhang, J., Guan, B., Wang, D., Liu, L.-M., & Lou, X. W. (2016) · Nature Communications · doi:10.1038/ncomms13065 · Cited by 677
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Carbon materials for Li–S batteries: Functional evolution and performance improvement
Liang, J., Sun, Z.-H., Li, F., & Cheng, H.-M. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.007 · Cited by 593
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries
Sun, J., Sun, Y., Pasta, M., Zhou, G., Li, Y., Liu, W., Xiong, F., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602172 · Cited by 516
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Yu, M., Ma, J., Song, H., Wang, A., Tian, F., Wang, Y., Qiu, H., & Wang, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03902a · Cited by 345
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Lu, S., Cheng, Y., Wu, X., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400543y · Cited by 319
Self-citationLee, J. T., Zhao, Y., Thieme, S., Kim, H., Oschatz, M., Borchardt, L., Magasinski, A., Cho, W., Kaskel, S., & Yushin, G. (2013) · Advanced Materials · doi:10.1002/adma.201301579 · Cited by 315
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Rehman, S., Guo, S., & Hou, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506111 · Cited by 302
Sun, L., Li, M., Jiang, Y., Kong, W., Jiang, K., Wang, J., & Fan, S. (2014) · Nano Letters · doi:10.1021/nl501486n · Cited by 288
Zhang, J., Shi, Y., Ding, Y., Zhang, W., & Yu, G. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03849 · Cited by 280
Gu, X., Tong, C.-J., Lai, C., Qiu, J., Huang, X., Yang, W., Wen, B., Liu, L.-M., Hou, Y., & Zhang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04255k · Cited by 270
Crab Shells as Sustainable Templates from Nature for Nanostructured Battery Electrodes
Yao, H., Zheng, G., Li, W., McDowell, M. T., Seh, Z., Liu, N., Lu, Z., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl401729r · Cited by 228
Rehman, S., Tang, T., Ali, Z., Huang, X., & Hou, Y. (2017) · Small · doi:10.1002/smll.201700087 · Cited by 216
Nanostructured cathode materials for lithium–sulfur batteries: progress, challenges and perspectives
Rehman, S., Khan, K., Zhao, Y., & Hou, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10111a · Cited by 189
Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating
Li, X., Lushington, A., Sun, Q., Xiao, W., Liu, J., Wang, B., Ye, Y., Nie, K., Hu, Y., Xiao, Q., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00577 · Cited by 185
Self-citationYu, M., Wang, Z., Wang, Y., Dong, Y., & Qiu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700018 · Cited by 180
Rehman, S., Gu, X., Khan, K., Mahmood, N., Yang, W., Huang, X., Guo, S., & Hou, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502518 · Cited by 176
Dong, Y., Liu, S., Wang, Z., Liu, Y., Zhao, Z., & Qiu, J. (2015) · Nanoscale · doi:10.1039/c5nr01015b · Cited by 107
Liu, Y., Wang, X., Dong, Y., Tang, Y., Wang, L., Jia, D., Zhao, Z., & Qiu, J. (2016) · Chemical Communications · doi:10.1039/c6cc06094c · Cited by 39
Zhang, M., Yu, C., Yang, J., Zhao, C., Ling, Z., & Qiu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01512g · Cited by 35
Cited by
Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting
Quan, L., Jiang, H., Mei, G., Sun, Y., & You, B. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00332 · Cited by 874
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Recent Advances in Hollow Porous Carbon Materials for Lithium–Sulfur Batteries
Fu, A., Wang, C., Pei, F., Cui, J., Fang, X., & Zheng, N. (2019) · Small · doi:10.1002/smll.201804786 · Cited by 417
Gueon, D., Hwang, J. T., Yang, S. B., Cho, E., Sohn, K., Yang, D.-K., & Moon, J. H. (2018) · ACS Nano · doi:10.1021/acsnano.7b05869 · Cited by 300
Metadata
- Authors
- Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-01
- Volume
- 139
- Issue
- 36
- Pages
- 12710-12715
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2745978578
- Cited by
- 502
- References
- 53
- FWCI
- 31.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
