The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101
Abstract
MIL-101, a chromium-based metal organic framework, is known to adsorb large amounts of green house gases such as CO 2 and CH 4 . Measurement, analysis, and modeling of the pure gas adsorption isotherms of desired gases are necessary for any attempt to use this framework for separation/storage applications. In an attempt to understand adsorption characteristics of this framework, pure gas adsorption properties of CO 2 and CH 4 along with C 3 H 8, SF 6, and Ar were measured at three temperatures 283, 319, and 351 K using a standard gravimetric method. The adsorbates were chosen based on their physical characteristics such as polarizability and quadrupole moment. Dual site Langmuir (DSL) isotherm proved to be useful for modeling adsorption of gases on this type of materials that are known to have heterogeneity. Active metal centers and sites inside the pores of supertetrahedra act as major locations for adsorption. Analysis of enthalpy of adsorption using the DSL model revealed that, for all gases, it initially decreases with loading and remains constant thereafter. For all gases considered, the enthalpies of adsorption were found to be lower than those on purely siliceous zeolite such as silicalite, suggesting that only moderate interaction exists between the gas and the MIL-101 framework. The enthalpy of adsorption at zero coverage and the logarithm of Henry’s constant were found to be linear functions of polarizability of the adsorbate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
From Molecules to Crystal Engineering: Supramolecular Isomerism and Polymorphism in Network Solids
Moulton, B., & Zaworotko, M. J. (2001) · Chemical Reviews · doi:10.1021/cr9900432 · Cited by 6,395
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Eddaoudi, M., Moler, D. B., Li, H., Chen, B., Reineke, T. M., O'Keeffe, M., & Yaghi, O. M. (2001) · Accounts of Chemical Research · doi:10.1021/ar000034b · Cited by 5,180
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Yaghi, O. M., Li, H., Davis, C., Richardson, D., & Groy, T. L. (1998) · Accounts of Chemical Research · doi:10.1021/ar970151f · Cited by 2,201
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Wang, D., Huang, R., Liu, W., Sun, D., & Li, Z. (2014) · ACS Catalysis · doi:10.1021/cs501169t · Cited by 869
Lin, Y., Tian, Z., Zhang, L., Ma, J., Jiang, Z., Deibert, B. J., Ge, R., & Chen, L. (2019) · Nature Communications · doi:10.1038/s41467-018-08144-3 · Cited by 734
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Songolzadeh, M., Soleimani, M., Takht Ravanchi, M., & Songolzadeh, R. (2014) · The Scientific World Journal · doi:10.1155/2014/828131 · Cited by 478
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
Metal–organic frameworks for photocatalysis
Li, Y., Xu, H., Ouyang, S., & Ye, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp05885f · Cited by 362
Yang, K., Sun, Q., Xue, F., & Lin, D. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.08.020 · Cited by 339
Metal organic framework mixed matrix membranes for gas separations
Adams, R., Carson, C., Ward, J., Tannenbaum, R., & Koros, W. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.11.035 · Cited by 338
Zorainy, M. Y., Gar Alalm, M., Kaliaguine, S., & Boffito, D. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06238g · Cited by 326
A new MOF-505@GO composite with high selectivity for CO2/CH4 and CO2/N2 separation
Chen, Y., Lv, D., Wu, J., Xiao, J., Xi, H., Xia, Q., & Li, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.138 · Cited by 325
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Polyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Lin, Y., Yan, Q., Kong, C., & Chen, L. (2013) · Scientific Reports · doi:10.1038/srep01859 · Cited by 311
Bhattacharjee, S., Chen, C., & Ahn, W.-S. (2014) · RSC Adv. · doi:10.1039/c4ra11259h · Cited by 301
Carbon Dioxide in Biomass Processing: Contributions to the Green Biorefinery Concept
Morais, A. R. C., da Costa Lopes, A. M., & Bogel-Łukasik, R. (2015) · Chemical Reviews · doi:10.1021/cr500330z · Cited by 296
Abscheidung von Kohlendioxid: Perspektiven für neue Materialien
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie · doi:10.1002/ange.201000431 · Cited by 291
Li, L., Tang, S., Wang, C., Lv, X., Jiang, M., Wu, H., & Zhao, X. (2014) · Chemical Communications · doi:10.1039/c3cc48275h · Cited by 278
Saha, D., & Kienbaum, M. J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.051 · Cited by 275
Emerging adsorptive removal of azo dye by metal–organic frameworks
Ayati, A., Shahrak, M. N., Tanhaei, B., & Sillanpää, M. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.06.065 · Cited by 271
Wang, T., Zhao, P., Lu, N., Chen, H., Zhang, C., & Hou, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.016 · Cited by 264
Zhang, G., Wei, G., Liu, Z., Oliver, S. R. J., & Fei, H. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02511 · Cited by 217
Metadata
- Authors
- Chowdhury, P., Bikkina, C., & Gumma, S.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-03-31
- Volume
- 113
- Issue
- 16
- Pages
- 6616-6621
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2030333782
- Cited by
- 269
- References
- 33
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.