The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101
Abstract
MIL-101, a chromium-based metal organic framework, is known to adsorb large amounts of green house gases such as CO 2 and CH 4 . Measurement, analysis, and modeling of the pure gas adsorption isotherms of desired gases are necessary for any attempt to use this framework for separation/storage applications. In an attempt to understand adsorption characteristics of this framework, pure gas adsorption properties of CO 2 and CH 4 along with C 3 H 8, SF 6, and Ar were measured at three temperatures 283, 319, and 351 K using a standard gravimetric method. The adsorbates were chosen based on their physical characteristics such as polarizability and quadrupole moment. Dual site Langmuir (DSL) isotherm proved to be useful for modeling adsorption of gases on this type of materials that are known to have heterogeneity. Active metal centers and sites inside the pores of supertetrahedra act as major locations for adsorption. Analysis of enthalpy of adsorption using the DSL model revealed that, for all gases, it initially decreases with loading and remains constant thereafter. For all gases considered, the enthalpies of adsorption were found to be lower than those on purely siliceous zeolite such as silicalite, suggesting that only moderate interaction exists between the gas and the MIL-101 framework. The enthalpy of adsorption at zero coverage and the logarithm of Henry’s constant were found to be linear functions of polarizability of the adsorbate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
From Molecules to Crystal Engineering: Supramolecular Isomerism and Polymorphism in Network Solids
Moulton, B., & Zaworotko, M. J. (2001) · Chemical Reviews · doi:10.1021/cr9900432 · Cited by 6,395
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Eddaoudi, M., Moler, D. B., Li, H., Chen, B., Reineke, T. M., O'Keeffe, M., & Yaghi, O. M. (2001) · Accounts of Chemical Research · doi:10.1021/ar000034b · Cited by 5,180
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Yaghi, O. M., Li, H., Davis, C., Richardson, D., & Groy, T. L. (1998) · Accounts of Chemical Research · doi:10.1021/ar970151f · Cited by 2,201
Metal Carboxylates with Open Architectures
Rao, C. N. R., Natarajan, S., & Vaidhyanathan, R. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300588 · Cited by 1,935
Inorganic crystal engineering using self-assembly of tailored building-blocks
Blake, A. J., Champness, N. R., Hubberstey, P., Li, W.-S., Withersby, M. A., & Schröder, M. (1999) · Coordination Chemistry Reviews · doi:10.1016/s0010-8545(98)00173-8 · Cited by 1,697
Exceptional H2 Saturation Uptake in Microporous Metal−Organic Frameworks
Wong-Foy, A. G., Matzger, A. J., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058213h · Cited by 1,281
Interwoven Metal-Organic Framework on a Periodic Minimal Surface with Extra-Large Pores
Chen, B., Eddaoudi, M., Hyde, S. T., O'Keeffe, M., & Yaghi, O. M. (2001) · Science · doi:10.1126/science.1056598 · Cited by 1,265
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Highly Porous and Stable Metal−Organic Frameworks: Structure Design and Sorption Properties
Eddaoudi, M., Li, H., & Yaghi, O. M. (2000) · Journal of the American Chemical Society · doi:10.1021/ja9933386 · Cited by 1,091
Hydrogen Storage in the Giant‐Pore Metal–Organic Frameworks MIL‐100 and MIL‐101
Latroche, M., Surblé, S., Serre, C., Mellot‐Draznieks, C., Llewellyn, P. L., Lee, J., Chang, J., Jhung, S. H., & Férey, G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600105 · Cited by 799
Design of New Materials for Methane Storage
Düren, T., Sarkisov, L., Yaghi, O. M., & Snurr, R. Q. (2004) · Langmuir · doi:10.1021/la0355500 · Cited by 731
Selective Guest Binding by Tailored Channels in a 3-D Porous Zinc(II)−Benzenetricarboxylate Network
Yaghi, O. M., Davis, C. E., Li, G., & Li, H. (1997) · Journal of the American Chemical Society · doi:10.1021/ja9639473 · Cited by 717
Microporous Metal Organic Materials: Promising Candidates as Sorbents for Hydrogen Storage
Pan, L., Sander, M. B., Huang, X., Li, J., Smith, M. R., Bittner, E. W., BOCKRATH, B. C., & Johnson, J. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0392871 · Cited by 651
High-Capacity Hydrogen and Nitric Oxide Adsorption and Storage in a Metal−Organic Framework
Xiao, B., Wheatley, P. S., Zhao, X., Fletcher, A. J., Fox, S., Rossi, A. G., Megson, I. L., Bordiga, S., Regli, L., Thomas, K. M., et al. (2007) · Journal of the American Chemical Society · doi:10.1021/ja066098k · Cited by 612
Flexibility in metal-organic framework materials: Impact on sorption properties
Fletcher, A. J., Thomas, K. M., & Rosseinsky, M. J. (2005) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2005.05.019 · Cited by 543
Dunne, J. A., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960496r · Cited by 468
Adsorption of Gases in Metal Organic Materials: Comparison of Simulations and Experiments
Garberoglio, G., Skoulidas, A. I., & Johnson, J. K. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp050948l · Cited by 389
Investigation of Acid Sites in a Zeotypic Giant Pores Chromium(III) Carboxylate
Vimont, A., Goupil, J.-M., Lavalley, J.-C., Daturi, M., Surblé, S., Serre, C., Millange, F., Férey, G., & Audebrand, N. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056906s · Cited by 384
Separation of CO2/CH4 mixtures with the MIL-53(Al) metal–organic framework
Finsy, V., Ma, L., Alaerts, L., De Vos, D. E., Baron, G. V., & Denayer, J. F. M. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.007 · Cited by 368
Chowdhury, P., Bikkina, C., Meister, D., Dreisbach, F., & Gumma, S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.07.029 · Cited by 269
Self-citationGolden, T. C., & Sircar, S. (1994) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1994.1023 · Cited by 251
Senkovska, I., & Kaskel, S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.09.016 · Cited by 232
Adsorption Equilibria of C1to C4Alkanes, CO2, and SF6on Silicalite
Sun, M. S., Shah, D. B., Xu, H. H., & Talu, O. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp9730196 · Cited by 220
Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect
LIU, Y., ZENG, J., ZHANG, J., XU, F., & SUN, L. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.04.029 · Cited by 188
Mathias, P. M., Kumar, R., Moyer, J. D., Schork, J. M., Srinivasan, S. R., Auvil, S. R., & Talu, O. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950291y · Cited by 173
Role of adsorbent heterogeneity on mixed gas adsorption
Sircar, S. (1991) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00053a027 · Cited by 68
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Wang, D., Huang, R., Liu, W., Sun, D., & Li, Z. (2014) · ACS Catalysis · doi:10.1021/cs501169t · Cited by 869
Lin, Y., Tian, Z., Zhang, L., Ma, J., Jiang, Z., Deibert, B. J., Ge, R., & Chen, L. (2019) · Nature Communications · doi:10.1038/s41467-018-08144-3 · Cited by 734
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
Metadata
- Authors
- Chowdhury, P., Bikkina, C., & Gumma, S.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-03-31
- Volume
- 113
- Issue
- 16
- Pages
- 6616-6621
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2030333782
- Cited by
- 269
- References
- 33
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.