CoChat

Oligosaccharide/Silicon-Containing Block Copolymers with 5 nm Features for Lithographic Applications

The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.

Abstract

Block copolymers demonstrate potential for use in next-generation lithography due to their ability to self-assemble into well-ordered periodic arrays on the 3-100 nm length scale. The successful lithographic application of block copolymers relies on three critical conditions being met: high Flory-Huggins interaction parameters (χ), which enable formation of <10 nm features, etch selectivity between blocks for facile pattern transfer, and thin film self-assembly control. The present paper describes the synthesis and self-assembly of block copolymers composed of naturally derived oligosaccharides coupled to a silicon-containing polystyrene derivative synthesized by activators regenerated by electron transfer atom transfer radical polymerization. The block copolymers have a large χ and a low degree of polymerization (N) enabling formation of 5 nm feature diameters, incorporate silicon in one block for oxygen reactive ion etch contrast, and exhibit bulk and thin film self-assembly of hexagonally packed cylinders facilitated by a combination of spin coating and solvent annealing techniques. As observed by small angle X-ray scattering and atomic force microscopy, these materials exhibit some of the smallest block copolymer features in the bulk and in thin films reported to date.

Overview

Integrity signals

Registry

Crossref · 10.1021/nn300459r

Cites

42 of 42 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. Lin B. J., 2004, J. Microlithogr. Microfabr. Microsyst., 3, 377

Cited by

See all 211

Metadata

Authors
Cushen, J. D., Otsuka, I., Bates, C. M., Halila, S., Fort, S., Rochas, C., Easley, J. A., Rausch, E. L., Thio, A., Borsali, R., Willson, C. G., & Ellison, C. J.
Affiliations
  • The University of Texas at Austin (US)
  • Centre National de la Recherche Scientifique (FR)
  • Centre de Recherche sur les Macromolécules Végétales-CERMAV, CNRS UPR 5301-ICMG and Joseph Fourier University, BP53, 38041 Grenoble Cedex 9, France
Corresponding author
  • Willson, C. Grant
  • Ellison, Christopher J.
Venue
ACS Nano
Published
2012-04-12
Volume
6
Issue
4
Pages
3424-3433
ISSN
  • 1936-0851 (ISSN-L)
  • 1936-086X
OpenAlex
W2323699776
Cited by
211
References
42
Citations by year
2026: 1 · 2025: 5 · 2024: 8 · 2023: 10 · 2022: 15 · 2021: 14 · 2020: 15 · 2019: 18 · 2018: 17 · 2017: 18 · 2016: 25 · 2015: 22 · 2014: 17 · 2013: 18 · 2012: 8
FWCI
9.55
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Nano (publishedVersion)
  • PubMed (publishedVersion)
  • HAL (submittedVersion)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
  • Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
Keywords
block copolymers, oligosaccharides, activators regenerated by electron transfer, atom transfer radical polymerization, self-assembly, nanolithography, hexagonal cylinders, Flory-Huggins interaction parameter, etch selectivity, reactive ion etching, solvent annealing, spin coating, natural polymers
MeSH terms
Oligosaccharides, Polymers, Printing, Silicon, Solvents, Microscopy, Atomic Force

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.