A Literature Review of Poly(Lactic Acid)
The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“During the ring-opening polymerization of D-lactide, catalyst systems based on aluminum alkoxides are reported to give a polylactide marked by controllable molecular weight with narrow dispersion [25].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [25]
In the citing paper
“There are three widely known ways to acquire PLA (Figure 6): lactic acid condensation, lactic acid azeotropic dehydrative condensation, and ring-opening polymerization (ROP) [25].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [25]
Citations
Cites
A method for estimating both the solubility parameters and molar volumes of liquids
Fedors, R. F. (1974) · Polymer Engineering & Science · doi:10.1002/pen.760140211 · Cited by 1,779 · cited 1×
“R. F. Fedors (1974) Polymer Engineering and Science 14(2), 120.”
BackgroundFischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366 · cited 1×
“J. Lunt (1998) Polymer Degradation and Stability 59, 145–152.crystallization temperature with an increase in the starch 30.”
BackgroundBiodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,187
Stereocomplex Formation between Enantiomeric Poly(lactide)s
박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Kister, G., Cassanas, G., & Vert, M. (1998) · Polymer · doi:10.1016/s0032-3861(97)00229-2 · Cited by 689
Research works printed but not linked: 25
- H. Benninga (Ed.) (1990) A History of Lactic Acid Making, Kluwer Academic Publishing, Boston, London, Dordrecht.
- J. H. Van Ness (1981) in Kirk-Othmer Encyclopedia of Chemical Technology, 3rd ed., Vol. 13, John Wiley and Sons, New York, pp. 80-103.
- R. Datta, S. Tsai, P. Bonsignore, S. Moon, and J. Frank (1995) FEMS Microbiology Reviews 16, 221-231. · doi:10.1111/j.1574-6976.1995.tb00168.x · Paper page
- G. B. Kharas, F. Sanchez-Riera, and D. K. Severson (1994) in D. P. Mobley (Ed.), Plastics From Microbes, Hanser-Gardner, Munich, pp. 93-137.
- T. Kashima, T. Kameoka, C. Higuchi, M. Ajioka, and A. Yamaguchi (1995) U.S. Patent 5,428,126.
- J. Kylma, M. Harkonen, and J. V. Seppala (1995) Abstracts of the Fourth International Workshop on Biodegradable Polymers, Poster 38.
- C. D. Dudgeon (1976) Bis-Orthoesters as Polymer Intermediates, Thesis, University of Massachusetts.
- H. Suizu, M. A. Takagi, A. Yamaguchi, and M. Ajioka (1996) U.S. Patent 5,496,923.
- D. R. Witzke (1996) Properties and Engineering of Polylactide Polymers, Thesis, Michigan State University.
- T. G. Kulagina, B. V. Lebedev, Y. G. Kiparisova, Y. B. Lyudvig, and I. G. Barskaya (1982) Vysokomolekulyarnye Soedineniya Seriya A24, 1496-1501.
- S. J. McLain, T. M. Ford, and N. E. Drysdale (1992) Polymer Preprints 33(2), 463-464.
- N. E. Drysdale, T. M. Ford, and S. J. McLain (1993) U.S. Patent 5,235,031.
- D. M. Bigg (1996) in Society of Plastics Engineers—Annual Technical Conference 54(2), 2028-2039.
- J. Huang, N. Buehler, E. Hall, R. Kean, J. Kolstad, L. Wu, and J. Runt (1996) Polymer Preprints 37(2), 370-371.
- K. Kishore, R. Vasanthakumari, and A. J. Pennings (1984) Journal of Polymer Science: Polymer Physics Edition 22(4), 537-542.
- J. K. Lalla and N. N. Chugh (1990) Indian Drugs 27(10), 516-522.
- M. H. Naitove (1995) Plastics Technology 41(3), 15-17.
- J. A. P. P. Van Dijk, J. A. Smit, F. E. Kohn, and J. Feijen (1983) Journal of Polymer Science: Polymer Chemistry Edition 21(1), 197-208.
- A. Schindler and D. Harper (1979) Journal of Polymer Science: Polymer Chemistry Edition 17, 2593-2599.
- J. W. Park, D. J. Lee, E. S. Yoo, S. S. Im, S. H. Kim, and Y. H. Kim (1999) Korea Polymer Journal 7(2), 93-101.
- G. Rocha, R. A. Gross, and S. P. McCarthy (1992) Polymer Preprints 33(2), 454-456.
- J. Brandrup and E. H. Immergut (1975) Polymer Handbook, 2nd edn., Wiley Intersciences, New York.
- C. M. Hansen (1967) Journal of Paint Technology 39, 104-117.
- A. F. M. Barton (1983) Handbook of Solubility Parameters, CRC Press, Boca Raton, FL.
- S. H. Kim, I-J. Chin, J-S. Yoon, S. H. Kim, and J-S. Jung (1998) Korea Polymer Journal 6(5), 422-427.
Cited by
Items 101–200 of 1,018
Mujtaba, M., Lipponen, J., Ojanen, M., Puttonen, S., & Vaittinen, H. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158328 · Cited by 283
“…was used to produce the fi lms. Decrease the oxygen permeability by 87 % i.e., from 1.4 to 0.6 × 10 Nowadays, PLA can be obtained in different lengths by using different available approaches (polycondensation, ring-opening and enzymatic polymerization, and azeotropic dehydration) (Garlotta, 2001).”
MethodInfluentialZeng, R.-C., Cui, L.-Y., Jiang, K., Liu, R., Zhao, B.-D., & Zheng, Y.-F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00527 · Cited by 314
Torres, J., Cole, M., Owji, A., DeMastry, Z., & Gordon, A. P. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2014-0083 · Cited by 295
“It has been shown that the combination of poly(l-lactic acid) and poly(d-lactic acid) enantiomers produces a stereocomplex with increased crystallization and varied material properties, such as a higher Tm, which will vary depending on the ratio of the mixture, thus giving the wide range of material properties of Tabl…”
BackgroundSwetha, T. A., Ananthi, V., Bora, A., Sengottuvelan, N., Ponnuchamy, K., Muthusamy, G., & Arun, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123703 · Cited by 288
Karamanlioglu, M., & Robson, G. D. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.07.004 · Cited by 301
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Tan, M. J., Owh, C., Chee, P. L., Kyaw, A. K. K., Kai, D., & Loh, X. J. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00678g · Cited by 288
Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions
Iovino, R., Zullo, R., Rao, M. A., Cassar, L., & Gianfreda, L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.10.011 · Cited by 286
Crystallization behavior of poly(l-lactic acid)
Di Lorenzo, M. L. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.020 · Cited by 295
Sustainable polyurethanes: toward new cutting-edge opportunities
Delavarde, A., Savin, G., Derkenne, P., Boursier, M., Morales-Cerrada, R., Nottelet, B., Pinaud, J., & Caillol, S. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101805 · Cited by 275
Past and present developments in polymer bead foams and bead foaming technology
Raps, D., Hossieny, N., Park, C. B., & Altstädt, V. (2015) · Polymer · doi:10.1016/j.polymer.2014.10.078 · Cited by 284
Melt rheology of variable L-content poly(lactic acid)
Dorgan, J. R., Janzen, J., Clayton, M. P., Hait, S. B., & Knauss, D. M. (2005) · Journal of Rheology · doi:10.1122/1.1896957 · Cited by 273
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Recent Development of Biobased Epoxy Resins: A Review
Kumar, S., Samal, S. K., Mohanty, S., & Nayak, S. K. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1253742 · Cited by 268
PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics
Pantani, R., Gorrasi, G., Vigliotta, G., Murariu, M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.08.005 · Cited by 275
“Polylactide (PLA) is an environmental friendly, economical and commercially available polymer that offers great potential as disposable packaging material [27-31].”
BackgroundPolylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C. (2010) · Macromolecules · doi:10.1021/ma9024366 · Cited by 266
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, M.-P., Lau, K.-T., Wang, H., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.05.048 · Cited by 268
Life cycle assessment of the manufacture of lactide and PLA biopolymers from sugarcane in Thailand
Groot, W. J., & Borén, T. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0225-y · Cited by 249
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
Zhou, H., Lawrence, J. G., & Bhaduri, S. B. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.031 · Cited by 267
Rheology and extrusion foaming of chain‐branched poly(lactic acid)
Mihai, M., Huneault, M. A., & Favis, B. D. (2010) · Polymer Engineering & Science · doi:10.1002/pen.21561 · Cited by 264
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
“0 GPa, respectively, depending on the molecular weight and stereochemical composition.(11) In addition, PLA shows melting temperature of 170»180 C which is higher than many other sustainable polymers such as poly(butylene succinate)”
BackgroundBai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Recycling of bioplastic waste: A review
Fredi, G., & Dorigato, A. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.06.006 · Cited by 227
Stereoselective Crystallization and Specific Interactions in Polylactides
Sarasua, J.-R., Rodríguez, N. L., Arraiza, A. L., & Meaurio, E. (2005) · Macromolecules · doi:10.1021/ma051266z · Cited by 252
Castillo, R. V., & Müller, A. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.03.002 · Cited by 253
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.06.013 · Cited by 244
Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
Baran, E. H., & Erbil, H. Y. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020043 · Cited by 248
Biodegradability of poly(butylene succinate) (PBS) composite reinforced with jute fibre
Liu, L., Yu, J., Cheng, L., & Yang, X. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.013 · Cited by 276
Surface-modified nano-cellulose as reinforcement in poly(lactic acid) to conform new composites
Robles, E., Urruzola, I., Labidi, J., & Serrano, L. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.075 · Cited by 247
Development, processing and applications of bio-sourced cellulose nanocrystal composites
Calvino, C., Macke, N., Kato, R., & Rowan, S. J. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101221 · Cited by 245
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L. (2021) · C · doi:10.3390/c7020042 · Cited by 237
“The method is based on the original Cargill-Dow patented process [8,18,33,37,39] and allows obtaining high Mw PLA with narrow molecular weight distribution.”
BackgroundMethodInfluentialSynthesis, properties, and applications of polylactic acid‐based polymers
Ramezani Dana, H., & Ebrahimi, F. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26193 · Cited by 217
Rhim, J., Mohanty, A. K., Singh, S. P., & Ng, P. K. W. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23403 · Cited by 240
A new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends
Akrami, M., Ghasemi, I., Azizi, H., Karrabi, M., & Seyedabadi, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.035 · Cited by 242
Liu, C., Luan, P., Li, Q., Cheng, Z., Sun, X., Cao, D., & Zhu, H. (2020) · Matter · doi:10.1016/j.matt.2020.10.004 · Cited by 236
Compatibility characterization of poly(lactic acid)/poly(propylene carbonate) blends
Ma, X., Yu, J., & Wang, N. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20669 · Cited by 239
Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends
Li, H., & Huneault, M. A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.32956 · Cited by 226
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Kowalczyk, M., Piorkowska, E., Kulpinski, P., & Pracella, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.07.003 · Cited by 236
Ran, N., Zhao, L., Chen, Z., & Tao, J. (2008) · Green Chem. · doi:10.1039/b716045c · Cited by 237
Zhou, G., Zhang, H., Su, Z., Zhang, X., Zhou, H., Yu, L., Chen, C., & Wang, X. (2023) · Advanced Materials · doi:10.1002/adma.202301398 · Cited by 229
Lönnberg, H., Zhou, Q., Brumer, H., Teeri, T. T., Malmström, E., & Hult, A. (2006) · Biomacromolecules · doi:10.1021/bm060178z · Cited by 226
Tailoring the Barrier Properties of PLA: A State-of-the-Art Review for Food Packaging Applications
Marano, S., Laudadio, E., Minnelli, C., & Stipa, P. (2022) · Polymers · doi:10.3390/polym14081626 · Cited by 213
“In addition, it has been widely reported that other factors such as the chain orientation and crystal packing of PLA also affect the crystallinity content, crystal thickness, spherulite size, and morphology, which in turn can strongly influence the final polymer properties [7].”
BackgroundBiopolymer and Synthetic Polymer-Based Nanocomposites in Wound Dressing Applications: A Review
Gobi, R., Ravichandiran, P., Babu, R. S., & Yoo, D. J. (2021) · Polymers · doi:10.3390/polym13121962 · Cited by 211
“There are several distinct types of polylactide ith the chiral structure of lactic acid; poly-L-lactide (PLL ) is the result of L-poly erization, hich is referred to as L-lactide [69,70].”
BackgroundInfluence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 221
Patel, B. B., Walsh, D. J., Kim, D. H., Kwok, J., Lee, B., Guironnet, D., & Diao, Y. (2020) · Science Advances · doi:10.1126/sciadv.aaz7202 · Cited by 221
“46) (34) and weight domain sizes based on a volume fraction (PDMS) of 0.”
BackgroundPoly lactic acid (PLA) polymers: from properties to biomedical applications
Ebrahimi, F., & Ramezani Dana, H. (2022) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2021.1944140 · Cited by 214
“PLA is relatively stiff at room temperature([62,63]), although its Tg is rather low, in the range of 55 65 C([63,64]) with Tm of 160 C([65]).”
BackgroundZeolite H-USY for the production of lactic acid and methyl lactate from C3-sugars
West, R. M., Holm, M. S., Saravanamurugan, S., Xiong, J., Beversdorf, Z., Taarning, E., & Christensen, C. H. (2010) · Journal of Catalysis · doi:10.1016/j.jcat.2009.10.023 · Cited by 224
State of the art and future prospectives of poly(lactic acid) based blends and composites
Sangeetha, V. H., Deka, H., Varghese, T. O., & Nayak, S. K. (2018) · Polymer Composites · doi:10.1002/pc.23906 · Cited by 216
Composites of poly(L‐lactide) with hemp fibers: Morphology and thermal and mechanical properties
Masirek, R., Kulinski, Z., Chionna, D., Piorkowska, E., & Pracella, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26090 · Cited by 218
Huang, M.-H., Li, S., & Vert, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.054 · Cited by 222
Linear Rheological Response of a Series of Densely Branched Brush Polymers
Hu, M., Xia, Y., McKenna, G. B., Kornfield, J. A., & Grubbs, R. H. (2011) · Macromolecules · doi:10.1021/ma2009673 · Cited by 215
Biomaterial strategies for alleviation of myocardial infarction
Venugopal, J. R., Prabhakaran, M. P., Mukherjee, S., Ravichandran, R., Dan, K., & Ramakrishna, S. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2011.0301 · Cited by 211
Hu, Y., Daoud, W., Cheuk, K., & Lin, C. (2016) · Materials · doi:10.3390/ma9030133 · Cited by 194
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Renewable polymers and plastics: Performance beyond the green
Pellis, A., Malinconico, M., Guarneri, A., & Gardossi, L. (2021) · New Biotechnology · doi:10.1016/j.nbt.2020.10.003 · Cited by 205
Essential oils as additives in active starch-based food packaging films: A review
Vianna, T. C., Marinho, C. O., Marangoni Júnior, L., Ibrahim, S. A., & Vieira, R. P. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.170 · Cited by 204
Environment Friendly Composite Materials: Biocomposites and Green Composites
Mitra, B. (2014) · Defence Science Journal · doi:10.14429/dsj.64.7323 · Cited by 205
Rosli, N. A., Karamanlioglu, M., Kargarzadeh, H., & Ahmad, I. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.196 · Cited by 207
Liu, S., Li, Y., & Li, N. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.007 · Cited by 207
Tissue engineering; strategies, tissues, and biomaterials
Bakhshandeh, B., Zarrintaj, P., Oftadeh, M. O., Keramati, F., Fouladiha, H., Sohrabi-jahromi, S., & Ziraksaz, Z. (2017) · Biotechnology and Genetic Engineering Reviews · doi:10.1080/02648725.2018.1430464 · Cited by 203
“direct condensation process under vacuum (Garlotta, 2001).”
Cooperative Catalysis for Multistep Biomass Conversion with Sn/Al Beta Zeolite
Dijkmans, J., Dusselier, M., Gabriëls, D., Houthoofd, K., Magusin, P. C. M. M., Huang, S., Pontikes, Y., Trekels, M., Vantomme, A., Giebeler, L., et al. (2015) · ACS Catalysis · doi:10.1021/cs501388e · Cited by 208
Reactively Modified Poly(lactic acid): Properties and Foam Processing
Di, Y., Iannace, S., Di Maio, E., & Nicolais, L. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500115 · Cited by 205
Hou, Y., Liu, L., Qiu, S., Zhou, X., Gui, Z., & Hu, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19395 · Cited by 208
PLA/banana fiber based sustainable biocomposites: A manufacturing perspective
Komal, U. K., Lila, M. K., & Singh, I. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107535 · Cited by 217
Composites of Wood and Biodegradable Thermoplastics: A Review
Chan, C. M., Vandi, L.-J., Pratt, S., Halley, P., Richardson, D., Werker, A., & Laycock, B. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1380039 · Cited by 207
“However, PLA homopolymers are subject to thermal degradation through hydrolysis at temperatures above 200 C.(57) With a melting temperature of around 175 C,(57) PLA homopolymers therefore have a narrow processing window.”
BackgroundCellulose‐Based Sustainable Polymers: State of the Art and Future Trends
Rose, M., & Palkovits, R. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100230 · Cited by 197
Shekhar, N., & Mondal, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05252-7 · Cited by 174
“By employing this polymerization method, high molecular weight polymers are obtained; however, they may contain notable levels of catalyst impurities [17].”
Biomass to biodegradable polymer (PLA)
Singhvi, M., & Gokhale, D. (2013) · RSC Advances · doi:10.1039/c3ra41592a · Cited by 198
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
Koh, J. J., Zhang, X., & He, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.048 · Cited by 200
Liu, G.-C., He, Y.-S., Zeng, J.-B., Li, Q.-T., & Wang, Y.-Z. (2014) · Biomacromolecules · doi:10.1021/bm5012739 · Cited by 205
Gao, Y., Picot, O. T., Bilotti, E., & Peijs, T. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.045 · Cited by 202
Nair, S. S., Chen, H., Peng, Y., Huang, Y., & Yan, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01405 · Cited by 198
Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review
Martinez Villadiego, K., Arias Tapia, M. J., Useche, J., & Escobar Macías, D. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02207-1 · Cited by 185
Cork–PLA composite filaments for fused deposition modelling
Daver, F., Lee, K. P. M., Brandt, M., & Shanks, R. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.008 · Cited by 190
Avérous, L., & Pollet, E. (2012) · Green Energy and Technology · doi:10.1007/978-1-4471-4108-2_2 · Cited by 172
A comprehensive review on fused deposition modelling of polylactic acid
Sandanamsamy, L., Harun, W. S. W., Ishak, I., Romlay, F. R. M., Kadirgama, K., Ramasamy, D., Idris, S. R. A., & Tsumori, F. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00356-w · Cited by 167
“As a result, PLA is one of the most commonly used biopolymers in the industry [184, 185].”
BackgroundEffect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)
Fernández-Tena, A., Pérez-Camargo, R. A., Coulembier, O., Sangroniz, L., Aranburu, N., Guerrica-Echevarria, G., Liu, G., Wang, D., Cavallo, D., & Müller, A. J. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00234 · Cited by 200
Characterisation of PCL and PCL/PLA Scaffolds for Tissue Engineering
Patrício, T., Domingos, M., Gloria, A., & Bártolo, P. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.022 · Cited by 196
“PLA is a biocompatible and resorbable aliphatic polyester characterized by its high melting temperature ( 160oC) and glass transition temperature ( 60oC) [14].”
BackgroundPolylactic acid production from biotechnological routes: A review
de Albuquerque, T. L., Marques Júnior, J. E., de Queiroz, L. P., Ricardo, A. D. S., & Rocha, M. V. P. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.074 · Cited by 188
Towards sustainability of lactic acid and poly-lactic acid polymers production
Djukić-Vuković, A., Mladenović, D., Ivanović, J., Pejin, J., & Mojović, L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.050 · Cited by 193
Blending poly(butylene succinate) with poly(lactic acid): Ductility and phase inversion effects
Deng, Y., & Thomas, N. L. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.029 · Cited by 191
“Although there are a number of methods for producing high molecular weight PLA, the method that is the most successful, and is therefore used commercially, is by ring-opening polymerisation of the lactide, which is a cyclic dimer consisting of two lactic acid molecules [3].”
BackgroundMethodImprovements in the crystallinity and mechanical properties of PLA by nucleation and annealing
Simmons, H., Tiwary, P., Colwell, J. E., & Kontopoulou, M. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.06.001 · Cited by 190
Effect of Polylactide Stereocomplex on the Crystallization Behavior of Poly(l-lactic acid)
Rahman, N., Kawai, T., Matsuba, G., Nishida, K., Kanaya, T., Watanabe, H., Okamoto, H., Kato, M., Usuki, A., Matsuda, M., et al. (2009) · Macromolecules · doi:10.1021/ma900004d · Cited by 194
Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies
Nofar, M., Tabatabaei, A., Sojoudiasli, H., Park, C. B., Carreau, P. J., Heuzey, M.-C., & Kamal, M. R. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.03.031 · Cited by 192
An overview of fused deposition modelling (FDM): research, development and process optimisation
Lalegani Dezaki, M., Mohd Ariffin, M. K. A., & Hatami, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2019-0230 · Cited by 186
Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties
Rasselet, D., Ruellan, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., & Fayolle, B. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.10.011 · Cited by 196
Naser, A. Z., Deiab, I., Defersha, F., & Yang, S. (2021) · Polymers · doi:10.3390/polym13234271 · Cited by 180
“Different types of PLA show various mechanical properties as well as degradation rates [4,22].”
BackgroundDegradable piezoelectric biomaterials for wearable and implantable bioelectronics
Li, J., Long, Y., Yang, F., & Wang, X. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100806 · Cited by 187
“As a representative synthetic biodegradable polymer, the PLA family has well-known and long-standing experiences in medicals.”
BackgroundInfluentialBio-resorbable polymer stents: a review of material progress and prospects
McMahon, S., Bertollo, N., Cearbhaill, E. D. O., Salber, J., Pierucci, L., Duffy, P., Dürig, T., Bi, V., & Wang, W. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.05.002 · Cited by 194
Extrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends
Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 188
Deng, Y., Yu, C., Wongwiwattana, P., & Thomas, N. L. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1256-x · Cited by 193
Polylactide‐pine wood flour composites
Pilla, S., Gong, S., O'Neill, E., Rowell, R. M., & Krzysik, A. M. (2008) · Polymer Engineering & Science · doi:10.1002/pen.20971 · Cited by 188
Chu, Z., Zhao, T., Li, L., Fan, J., & Qin, Y. (2017) · Materials · doi:10.3390/ma10060659 · Cited by 189
Zhang, R., Xiao, X., Tai, Q., Huang, H., & Hu, Y. Z. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23214 · Cited by 191
Shirai, M. A., Grossmann, M. V. E., Mali, S., Yamashita, F., Garcia, P. S., & Müller, C. M. O. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.038 · Cited by 189
Metadata
- Authors
- Garlotta, D.
- Affiliations
- Agricultural Research Service (US)
- Corresponding author
- Garlotta, Donald
- Venue
- Journal of Polymers and the Environment
- Published
- 2001-04
- Volume
- 9
- Issue
- 2
- Pages
- 63-84
- ISSN
- 1064-7546 (ISSN-L)
- 1566-2543
- 1572-8900
- OpenAlex
- W40301670
- Cited by
- 3,707
- References
- 97
- Citations by year
- 2026: 128 · 2025: 183 · 2024: 185 · 2023: 218 · 2022: 214 · 2021: 277 · 2020: 223 · 2019: 248 · 2018: 235 · 2017: 265 · 2016: 253 · 2015: 186 · 2014: 218 · 2013: 203 · 2012: 183
- FWCI
- 2.84
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Journal of Polymers and the Environment (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, polymer synthesis, crystallinity, annealing, polymer orientation, tensile properties, crystallization kinetics, melt rheology, solution rheology, Mark-Houwink equation, power-law rheology, starch composites, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.