The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ultrastrong ductile and stable high-entropy alloys at small scales
Open accessAbstract
Refractory high-entropy alloys (HEAs) are a class of emerging multi-component alloys, showing superior mechanical properties at elevated temperatures and being technologically interesting. However, they are generally brittle at room temperature, fail by cracking at low compressive strains and suffer from limited formability. Here we report a strategy for the fabrication of refractory HEA thin films and small-sized pillars that consist of strongly textured, columnar and nanometre-sized grains. Such HEA pillars exhibit extraordinarily high yield strengths of ∼10 GPa—among the highest reported strengths in micro-/nano-pillar compression and one order of magnitude higher than that of its bulk form—and their ductility is considerably improved (compressive plastic strains over 30%). Additionally, we demonstrate that such HEA films show substantially enhanced stability for high-temperature, long-duration conditions (at 1,100 °C for 3 days). Small-scale HEAs combining these properties represent a new class of materials in small-dimension devices potentially for high-stress and high-temperature applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Cited by
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
Liu, W. H., Lu, Z. P., He, J. Y., Luan, J. H., Wang, Z. J., Liu, B., Liu, Y., Chen, M. W., & Liu, C. T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.063 · Cited by 1,064
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Gao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Outstanding radiation resistance of tungsten-based high-entropy alloys
El-Atwani, O., Li, N., Li, M., Devaraj, A., Baldwin, J. K. S., Schneider, M. M., Sobieraj, D., Wróbel, J. S., Nguyen-Manh, D., Maloy, S. A., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav2002 · Cited by 658
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Corrosion of high entropy alloys
Qiu, Y., Thomas, S., Gibson, M. A., Fraser, H. L., & Birbilis, N. (2017) · npj Materials Degradation · doi:10.1038/s41529-017-0009-y · Cited by 604
Yang, M., Yan, D., Yuan, F., Jiang, P., Ma, E., & Wu, X. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1807817115 · Cited by 548
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Alloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 509
Microstructures and mechanical properties of Ti NbMoTaW refractory high-entropy alloys
Han, Z. D., Luan, H. W., Liu, X., Chen, N., Li, X. Y., Shao, Y., & Yao, K. F. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.12.004 · Cited by 401
Nanoporous high-entropy alloys for highly stable and efficient catalysts
Qiu, H.-J., Fang, G., Wen, Y., Liu, P., Xie, G., Liu, X., & Sun, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00505f · Cited by 364
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
A ductile high entropy alloy with attractive magnetic properties
Li, P., Wang, A., & Liu, C. T. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.186 · Cited by 277
Enhanced radiation tolerance of the Ni-Co-Cr-Fe high-entropy alloy as revealed from primary damage
Lin, Y., Yang, T., Lang, L., Shan, C., Deng, H., Hu, W., & Gao, F. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.027 · Cited by 265
Li, S., Tang, X., Jia, H., Li, H., Xie, G., Liu, X., Lin, X., & Qiu, H.-J. (2020) · Journal of Catalysis · doi:10.1016/j.jcat.2020.01.024 · Cited by 253
Robust zero resistance in a superconducting high-entropy alloy at pressures up to 190 GPa
Guo, J., Wang, H., von Rohr, F., Wang, Z., Cai, S., Zhou, Y., Yang, K., Li, A., Jiang, S., Wu, Q., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1716981114 · Cited by 212
High-entropy alloy superconductors: Status, opportunities, and challenges
Sun, L., & Cava, R. J. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.090301 · Cited by 213
von Rohr, F., Winiarski, M. J., Tao, J., Klimczuk, T., & Cava, R. J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615926113 · Cited by 198
Sc–Zr–Nb–Rh–Pd and Sc–Zr–Nb–Ta–Rh–Pd High-Entropy Alloy Superconductors on a CsCl-Type Lattice
Stolze, K., Tao, J., von Rohr, F. O., Kong, T., & Cava, R. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04578 · Cited by 122
Superconductivity in a new hexagonal high-entropy alloy
Marik, S., Motla, K., Varghese, M., Sajilesh, K. P., Singh, D., Breard, Y., Boullay, P., & Singh, R. P. (2019) · Physical Review Materials · doi:10.1103/physrevmaterials.3.060602 · Cited by 113
Cutting Edge of High-Entropy Alloy Superconductors from the Perspective of Materials Research
Kitagawa, J., Hamamoto, S., & Ishizu, N. (2020) · Metals · doi:10.3390/met10081078 · Cited by 109
High-entropy alloy superconductors on an α-Mn lattice
Stolze, K., Cevallos, F. A., Kong, T., & Cava, R. J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03337d · Cited by 104
von Rohr, F. O., & Cava, R. J. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.034801 · Cited by 85
Superconductivity in equimolar Nb-Re-Hf-Zr-Ti high entropy alloy
Marik, S., Varghese, M., Sajilesh, K. P., Singh, D., & Singh, R. P. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.039 · Cited by 83
Superconductivity in a uranium containing high entropy alloy
Nelson, W. L., Chemey, A. T., Hertz, M., Choi, E., Graf, D. E., Latturner, S., Albrecht-Schmitt, T. E., Wei, K., & Baumbach, R. E. (2020) · Scientific Reports · doi:10.1038/s41598-020-61666-z · Cited by 47
Fishtail effect and the vortex phase diagram of high-entropy alloy superconductor
Gao, L., Ying, T., Zhao, Y., Cao, W., Li, C., Xiong, L., Wang, Q., Pei, C., Ge, J.-Y., Hosono, H., et al. (2022) · Applied Physics Letters · doi:10.1063/5.0083365 · Cited by 27
Superconductivity with a high upper critical field in an equiatomic high-entropy alloy Sc–V–Ti–Hf–Nb
Jangid, S., Meena, P. K., Kushwaha, R. K., Srivastava, S., Manna, P., Mishra, P., Sharma, S., & Singh, R. P. (2024) · Applied Physics Letters · doi:10.1063/5.0200805 · Cited by 27
Metadata
- Authors
- Zou, Y., Ma, H., & Spolenak, R.
- Venue
- Nature Communications
- Published
- 2015-07-10
- Volume
- 6
- Issue
- 1
- Pages
- 7748-7748
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2253973836
- Cited by
- 634
- References
- 1
- FWCI
- 37.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.