Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 24 of the 25 references it cites were found in a registry or an index; 19 of the 23 sources its claims cite were checked for support.

Droplet Digital PCR versus qPCR for gene expression analysis with low abundant targets: from variable nonsense to publication quality data

Open access
Taylor, Sean C., Laperriere, Genevieve, Germain, Hugo · 2017 · Scientific Reports

Abstract

Quantitative PCR (qPCR) has become the gold standard technique to measure cDNA and gDNA levels but the resulting data can be highly variable, artifactual and non-reproducible without appropriate verification and validation of both samples and primers. The root cause of poor quality data is typically associated with inadequate dilution of residual protein and chemical contaminants that variably inhibit Taq polymerase and primer annealing. The most susceptible, frustrating and often most interesting samples are those containing low abundant targets with small expression differences of 2-fold or lower. Here, Droplet Digital PCR (ddPCR) and qPCR platforms were directly compared for gene expression analysis using low amounts of purified, synthetic DNA in well characterized samples under identical reaction conditions. We conclude that for sample/target combinations with low levels of nucleic acids (Cq ≥ 29) and/or variable amounts of chemical and protein contaminants, ddPCR technology will produce more precise, reproducible and statistically significant results required for publication quality data. A stepwise methodology is also described to choose between these complimentary technologies to obtain the best results for any experiment.

Overview

CoChat Summary

TL;DR

In a direct comparison using synthetic DNA and controlled RT-mix contamination, ddPCR produced more precise, reproducible, and statistically significant quantification than qPCR for low-abundance targets. The authors conclude that for samples with Cq ≥ 29 and/or variable contaminants, ddPCR is preferable for publication-quality gene expression data.

Key findings

  • With clean 1/2 serial dilutions in water, both platforms performed similarly: qPCR efficiencies were 90–110%, with a single melt peak and <15% CV; ddPCR showed good droplet separation and 2-fold dilution correlation.
  • With RT-mix contamination, qPCR efficiency fell to ~89.6% with 4 µL and 67.1% with 5 µL, producing an ~2 Cq shift and a perceived ~4-fold reduction in average relative quantity at each DNA dilution; ddPCR average absolute concentrations remained similar across contamination levels.
  • Combining variable RT contamination (4 vs 5 µL) without normalization, qPCR %CV was 60–87% with p-values 0.0831–0.1492 (log-transformed 0.0801–0.1841), while ddPCR %CV was 7–30% with p < 0.0002 between dilutions.
  • Reference-gene normalization: qPCR reference shifted from 28.5 to 30.0 Cq (~2.8-fold/280% contamination effect); ddPCR showed 34.0 vs 32.0 copies/µL (5.9% difference, no significant contamination effect). Normalization tightened qPCR six-replicate data from ~4-fold to ~1.5-fold, but p-values remained mostly >0.008; ddPCR gave p ≤ 0.0024 for the small set and close to or below 0.001 without normalization.

Methods

  • Synthetic DNA template and primers from the EvaGreen ddPCR Demonstration Kit; template diluted ~400-fold, then 1/2 serial dilutions; iScript RT mix added at 4 or 5 µL to create contamination; a single reaction mix was split 20 µL each to qPCR (CFX96 Touch) and ddPCR (QX200).
  • Cycling was identical for both platforms: 95 °C for 5 min, then 40 cycles of 95 °C for 30 s and 60 °C for 1 min; ddPCR used a 2 °C/s ramp, qPCR used maximum ramp; qPCR included a melt curve from 65 °C to 95 °C.
  • qPCR relative/normalized data were processed with CFX Manager v3.1; ddPCR copies/µL with QuantaSoft v1.7.4; statistical analysis used Excel with Analyze-it v2.20, Shapiro-Wilk normality tests, Student’s t-tests, and %CV; log-transformed normalized qPCR data were also tested.

Limitations

  • No formal limitations section is included; evident from the text: experiments used synthetic DNA and a single primer/template system from a demonstration kit, not complex biological RNA/cDNA samples, so generalizability to real gene expression, miRNA, or mRNA studies is limited.
  • Evident from the text: contamination was modeled only with reverse transcription mix; other protein/chemical inhibitors and variable reverse transcription efficiency were not tested.
  • Stated: ddPCR did not require reference-gene normalization in this experiment because contamination had virtually no effect and a measured amount of DNA was applied, but the authors state reference-gene normalization is always recommended for gene expression analysis with ddPCR.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41598-017-02217-x

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Assessment of primer efficiency, linear dynamic range and precision of ddPCR and qPCR platforms for low target concentration. Five reactions of 45 µL were prepared in triplicate from 1/2 serial dilutions of synthetic DNA in nuclease-free water with primers and ddPCR EvaGreen supermix. Each reaction mix was split for quantification in qPCR and ddPCR (20 µL for each platform). Amplification traces (A), standard curve (A inset), melt analysis (B) and tabulated relative fold difference (ΔCq) results (C) for qPCR. The ddPCR amplitude plot (D) and tabulated absolute concentration data (E). NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100).
Figure 1 Assessment of primer efficiency, linear dynamic range and precision of ddPCR and qPCR platforms for low target concentration. Five reactions of 45 µL were prepared in triplicate from 1/2 serial dilutions of synthetic DNA in nuclease-free water with primers and ddPCR EvaGreen supermix. Each reaction mix was split for quantification in qPCR and ddPCR (20 µL for each platform). Amplification traces (A), standard curve (A inset), melt analysis (B) and tabulated relative fold difference (ΔCq) results (C) for qPCR. The ddPCR amplitude plot (D) and tabulated absolute concentration data (E). NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100).CC BY · PubMed Central
Figure 2 Effect of consistent sample contamination between identical DNA dilutions for ddPCR and qPCR technologies. Four reactions of 50 µL were prepared in triplicate from 1/2 serial dilutions of synthetic DNA in a background of either 10 µL (A) or 12.5 µL (B) of 1X reverse transcription (RT) mix with primers and ddPCR EvaGreen supermix. Each reaction mix was split for quantification in qPCR and ddPCR (20 µL for each platform containing either 4 µL or 5 µL of contaminating RT mix) and run on a single plate for each platform. Amplification traces (A and C), standard curves (B and D) and tabulated relative fold difference (ΔCq) results (E and F) were generated for qPCR. The ddPCR amplitude plots (G and I) and tabulated absolute concentration data (H and J) from the same reactions supplemented with 4 uL (A,B,E,G,H) and 5 uL (C,D,F,I,J) of RT mix were produced. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100).
Figure 2 Effect of consistent sample contamination between identical DNA dilutions for ddPCR and qPCR technologies. Four reactions of 50 µL were prepared in triplicate from 1/2 serial dilutions of synthetic DNA in a background of either 10 µL (A) or 12.5 µL (B) of 1X reverse transcription (RT) mix with primers and ddPCR EvaGreen supermix. Each reaction mix was split for quantification in qPCR and ddPCR (20 µL for each platform containing either 4 µL or 5 µL of contaminating RT mix) and run on a single plate for each platform. Amplification traces (A and C), standard curves (B and D) and tabulated relative fold difference (ΔCq) results (E and F) were generated for qPCR. The ddPCR amplitude plots (G and I) and tabulated absolute concentration data (H and J) from the same reactions supplemented with 4 uL (A,B,E,G,H) and 5 uL (C,D,F,I,J) of RT mix were produced. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100).CC BY · PubMed Central
Figure 3 Effect of inconsistent sample contamination for the combined RT-contaminated samples at each DNA dilution for ddPCR and qPCR platforms without normalization. The reproducibility of the data between the combined reactions containing differing amounts of (RT) mix (Fig. 2) was examined for qPCR and ddPCR technologies. Amplification traces (A) and box plot (A inset) from the combined qPCR reactions supplemented with 4 uL and 5 uL of RT mix (blue and red traces and graphed points respectively) and tabulated relative fold difference (ΔCq) was produced (B). The amplitude plot and tabulated absolute concentration data from the combined ddPCR reactions supplemented with 4 uL and 5 uL of RT mix (C) and tabulated absolute concentration data (D) was generated. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100); p-value: based on a Student t-test of the Avg between each dilution.
Figure 3 Effect of inconsistent sample contamination for the combined RT-contaminated samples at each DNA dilution for ddPCR and qPCR platforms without normalization. The reproducibility of the data between the combined reactions containing differing amounts of (RT) mix (Fig. 2) was examined for qPCR and ddPCR technologies. Amplification traces (A) and box plot (A inset) from the combined qPCR reactions supplemented with 4 uL and 5 uL of RT mix (blue and red traces and graphed points respectively) and tabulated relative fold difference (ΔCq) was produced (B). The amplitude plot and tabulated absolute concentration data from the combined ddPCR reactions supplemented with 4 uL and 5 uL of RT mix (C) and tabulated absolute concentration data (D) was generated. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100); p-value: based on a Student t-test of the Avg between each dilution.CC BY · PubMed Central
Figure 4 Reference gene normalization can improve qPCR precision depending on contaminant levels and number of replicate samples. The reproducibility of the data between the combined reactions at each 1/2 dilution of DNA (Fig. 2) was compared between ddPCR and qPCR technologies with normalization to the same synthetic target amplified from a consistent amount of DNA at each level of RT contaminant. Box plot (A) from four combined ddPCR reactions supplemented with 4 uL and 5 uL of RT mix and tabulated absolute concentration data from the combined ddPCR reactions (B). Box plot (C) from qPCR data generated from the same four reactions as described in A with normalization to the same target at a consistent DNA concentration between the RT contaminated samples (E inset) and tabulated normalized relative fold difference (ΔΔCq) (D). Box plot (E) from qPCR data generated from all six reactions as described in Fig. 2 with normalization to the same target at a consistent DNA concentration between the RT contaminated samples (E inset) and tabulated normalized relative fold difference (ΔΔCq) (F). Blue and Red traces and graphed data points from qPCR and ddPCR reactions supplemented with 4 uL and 5 uL of RT mix respectively. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100); p-value: based on a Student t-test of the Avg between each dilution.
Figure 4 Reference gene normalization can improve qPCR precision depending on contaminant levels and number of replicate samples. The reproducibility of the data between the combined reactions at each 1/2 dilution of DNA (Fig. 2) was compared between ddPCR and qPCR technologies with normalization to the same synthetic target amplified from a consistent amount of DNA at each level of RT contaminant. Box plot (A) from four combined ddPCR reactions supplemented with 4 uL and 5 uL of RT mix and tabulated absolute concentration data from the combined ddPCR reactions (B). Box plot (C) from qPCR data generated from the same four reactions as described in A with normalization to the same target at a consistent DNA concentration between the RT contaminated samples (E inset) and tabulated normalized relative fold difference (ΔΔCq) (D). Box plot (E) from qPCR data generated from all six reactions as described in Fig. 2 with normalization to the same target at a consistent DNA concentration between the RT contaminated samples (E inset) and tabulated normalized relative fold difference (ΔΔCq) (F). Blue and Red traces and graphed data points from qPCR and ddPCR reactions supplemented with 4 uL and 5 uL of RT mix respectively. NTC: No Template Control; Dilution: Dilution factor of DNA samples; Rep: Replicate number; Avg: Average of the replicates; Std. Dev.: Standard Deviation between the replicates; % CV: % Coefficient of Variance (Std. Dev./Avg*100); p-value: based on a Student t-test of the Avg between each dilution.CC BY · PubMed Central

Verification

Claims the paper makes

11 Valid · 1 Not valid · 1 Not checked · 26 Own results and interpretations

14 more claims · 1 with their cited sources checked

Create a free account to see all 39 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 3
  • It may state two separate claims as one. 18

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 25 references

Cited by

See all 638

Metadata

Authors
Taylor, S. C., Laperriere, G., & Germain, H.
Affiliations
  • Bio-Rad (United States) (US)
  • Université du Québec à Trois-Rivières (CA)
Corresponding author
Taylor, Sean C.
Venue
Scientific Reports
Published
2017-05-25
Volume
7
Issue
1
Pages
2409-2409
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2615046465
Cited by
638
References
25
Citations by year
2026: 59 · 2025: 75 · 2024: 83 · 2023: 92 · 2022: 97 · 2021: 84 · 2020: 74 · 2019: 40 · 2018: 32 · 2017: 2
FWCI
14.52
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Le dépôt institutionnel (Université du Québec à Trois-Rivières) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Molecular Biology Techniques and Applications
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Gene expression and cancer classification
  • Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Innovative Microfluidic and Catalytic Techniques Innovation
Keywords
droplet digital PCR, real-time PCR, gene expression analysis, primer annealing, primer design, reproducibility, data quality, synthetic DNA, primer validation
MeSH terms
Gene Expression Regulation, Humans, Reference Standards, Gene Dosage, Gene Expression Profiling, Real-Time Polymerase Chain Reaction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Droplet Digital PCR versus qPCR for gene expression analysis with low abundant targets: from variable nonsense to publication quality data. https://app.cochat.ai/papers/10.1038/s41598-017-02217-x
The paper
Taylor, S. C., Laperriere, G., & Germain, H. (2017). Droplet Digital PCR versus qPCR for gene expression analysis with low abundant targets: from variable nonsense to publication quality data. Scientific Reports. https://doi.org/10.1038/s41598-017-02217-x

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.