The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Polyethyleneimine Incorporated Metal-Organic Frameworks Adsorbent for Highly Selective CO2 Capture
Open accessAbstract
A series of polyethyleneimine (PEI) incorporated MIL-101 adsorbents with different PEI loadings were reported for the first time in the present work. Although the surface area and pore volume of MIL-101 decreased significantly after loading PEI, all the resulting composites exhibited dramatically enhanced CO2 adsorption capacity at low pressures. At 100 wt% PEI loading, the CO2 adsorption capacity at 0.15 bar reached a very competitive value of 4.2 mmol g(-1) at 25°C, and 3.4 mmol g(-1) at 50°C. More importantly, the resulting adsorbents displayed rapid adsorption kinetics and ultrahigh selectivity for CO2 over N2 in the designed flue gas with 0.15 bar CO2 and 0.75 bar N2. The CO2 over N2 selectivity was up to 770 at 25°C, and 1200 at 50°C. We believe that the PEI based metal-organic frameworks is an attractive adsorbent for CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Hwang, Y. K., Hong, D., Chang, J., Jhung, S. H., Seo, Y., Kim, J., Vimont, A., Daturi, M., Serre, C., & Férey, G. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705998 · Cited by 1,243
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Hong, D., Hwang, Y. K., Serre, C., Férey, G., & Chang, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801130 · Cited by 978
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Tuning MOF CO2 Adsorption Properties via Cation Exchange
An, J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1012992 · Cited by 599
Sulfonate-Grafted Porous Polymer Networks for Preferential CO2 Adsorption at Low Pressure
Lu, W., Yuan, D., Sculley, J., Zhao, D., Krishna, R., & Zhou, H.-C. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2087773 · Cited by 571
Metal Insertion in a Microporous Metal−Organic Framework Lined with 2,2′-Bipyridine
Bloch, E. D., Britt, D., Lee, C., Doonan, C. J., Uribe-Romo, F. J., Furukawa, H., Long, J. R., & Yaghi, O. M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106935d · Cited by 568
Carbon Dioxide Capture from the Air Using a Polyamine Based Regenerable Solid Adsorbent
Goeppert, A., Czaun, M., May, R. B., Prakash, G. K. S., Olah, G. A., & Narayanan, S. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2100005 · Cited by 558
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Qi, G., Wang, Y., Estevez, L., Duan, X., Anako, N., Park, A.-H. A., Li, W., Jones, C. W., & Giannelis, E. P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00213e · Cited by 507
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
On the Structure of a Catalyst Surface. II
Sips, R. (1950) · The Journal of Chemical Physics · doi:10.1063/1.1747848 · Cited by 397
Recent advances in carbon dioxide capture with metal‐organic frameworks
Liu, Y., Wang, Z. U., & Zhou, H. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1296 · Cited by 357
Photochemical Removal of Mercury from Flue Gas
Granite, E. J., & Pennline, H. W. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020251b · Cited by 322
Gas Adsorption Properties of the Chromium-Based Metal Organic Framework MIL-101
Chowdhury, P., Bikkina, C., & Gumma, S. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp811418r · Cited by 269
Direct synthesis of amine-functionalized MIL-101(Cr) nanoparticles and application for CO2 capture
Lin, Y., Kong, C., & Chen, L. (2012) · RSC Advances · doi:10.1039/c2ra20641b · Cited by 264
Self-citationSi, X., Jiao, C., Li, F., Zhang, J., Wang, S., Liu, S., Li, Z., Sun, L., Xu, F., Gabelica, Z., et al. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01380g · Cited by 262
Dramatic Enhancement of CO2 Uptake by Poly(ethyleneimine) Using Zirconosilicate Supports
Kuwahara, Y., Kang, D.-Y., Copeland, J. R., Brunelli, N. A., Didas, S. A., Bollini, P., Sievers, C., Kamegawa, T., Yamashita, H., & Jones, C. W. (2012) · Journal of the American Chemical Society · doi:10.1021/ja303136e · Cited by 236
Chaikittisilp, W., Khunsupat, R., Chen, T. T., & Jones, C. W. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201584t · Cited by 222
Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect
LIU, Y., ZENG, J., ZHANG, J., XU, F., & SUN, L. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.04.029 · Cited by 188
Efficient CO2 sorbents based on silica foam with ultra-large mesopores
Qi, G., Fu, L., Choi, B. H., & Giannelis, E. P. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21394j · Cited by 159
Babarao, R., Jiang, J., & Sandler, S. I. (2008) · Langmuir · doi:10.1021/la803074g · Cited by 150
Kauffman, K. L., Culp, J. T., Allen, A. J., Espinal, L., Wong-Ng, W., Brown, T. D., Goodman, A., Bernardo, M. P., Pancoast, R. J., Chirdon, D. N., et al. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201104130 · Cited by 56
Babarao, R., Jiang, J., & Sandler, S. I. (2009) · Langmuir · doi:10.1021/la901515r · Cited by 10
Cited by
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Lin, Y., Tian, Z., Zhang, L., Ma, J., Jiang, Z., Deibert, B. J., Ge, R., & Chen, L. (2019) · Nature Communications · doi:10.1038/s41467-018-08144-3 · Cited by 734
Self-citation
Metadata
- Authors
- Lin, Y., Yan, Q., Kong, C., & Chen, L.
- Venue
- Scientific Reports
- Published
- 2013-05-17
- Volume
- 3
- Issue
- 1
- Pages
- 1859-1859
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2040123693
- Cited by
- 311
- References
- 36
- FWCI
- 23.91
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.