Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Three-dimensional models of kidney tissue that recapitulate human responses are needed for drug screening, disease modeling, and, ultimately, kidney organ engineering. Here, we report a bioprinting method for creating 3D human renal proximal tubules in vitro that are fully embedded within an extracellular matrix and housed in perfusable tissue chips, allowing them to be maintained for greater than two months. Their convoluted tubular architecture is circumscribed by proximal tubule epithelial cells and actively perfused through the open lumen. These engineered 3D proximal tubules on chip exhibit significantly enhanced epithelial morphology and functional properties relative to the same cells grown on 2D controls with or without perfusion. Upon introducing the nephrotoxin, Cyclosporine A, the epithelial barrier is disrupted in a dose-dependent manner. Our bioprinting method provides a new route for programmably fabricating advanced human kidney tissue models on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [67]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Differential Diagnosis of Glomerular Disease: A Systematic and Inclusive Approach
Hebert, L. A., Parikh, S., Prosek, J., Nadasdy, T., & Rovin, B. H. (2013) · American Journal of Nephrology · doi:10.1159/000354390 · Cited by 4,376
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis
Takasato, M., Er, P. X., Chiu, H. S., Maier, B., Baillie, G. J., Ferguson, C., Parton, R. G., Wolvetang, E. J., Roost, M. S., Chuva de Sousa Lopes, S. M., et al. (2015) · Nature · doi:10.1038/nature15695 · Cited by 1,627
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Self-citationNephron organoids derived from human pluripotent stem cells model kidney development and injury
Morizane, R., Lam, A. Q., Freedman, B. S., Kishi, S., Valerius, M. T., & Bonventre, J. V. (2015) · Nature Biotechnology · doi:10.1038/nbt.3392 · Cited by 927
Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment
Jang, K.-J., Mehr, A. P., Hamilton, G. A., McPartlin, L. A., Chung, S., Suh, K.-Y., & Ingber, D. E. (2013) · Integrative Biology · doi:10.1039/c3ib40049b · Cited by 849
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationFreedman, B. S., Brooks, C. R., Lam, A. Q., Fu, H., Morizane, R., Agrawal, V., Saad, A. F., Li, M. K., Hughes, M. R., Werff, R. V., et al. (2015) · Nature Communications · doi:10.1038/ncomms9715 · Cited by 780
Takasato, M., Er, P. X., Becroft, M., Vanslambrouck, J. M., Stanley, E. G., Elefanty, A. G., & Little, M. H. (2014) · Nature Cell Biology · doi:10.1038/ncb2894 · Cited by 720
Research works printed but not linked: 2
- Naughton, C. A. Drug-induced nephrotoxicity. Am. Fam. Physician 78, 743–750 (2008).
- Price, G. & Tien, J. In Biological Microarrays Vol. 671 Methods in Molecular Biology (eds Ali, Khademhosseini, Kahp-Yang, Suh & Mohammed, Zourob ) Ch. 17, 281–293 (Humana Press, 2011).
Cited by
Items 401–500 of 751
Bioinspired micro-structured fibers for biomedical applications
Guo, J., Miao, S., Sun, L., Zhao, Y., & Gu, X. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.012 · Cited by 17
Tunable network architecture in a hydrogel with extreme vibration damping properties
Day, G. J., Zhang, Q., Remillat, C., Comandini, G., Perriman, A. W., & Scarpa, F. L. (2025) · Communications Materials · doi:10.1038/s43246-025-00857-5 · Cited by 17
From organoids to transplantable artificial kidneys
Naganuma, H., & Nishinakamura, R. (2019) · Transplant International · doi:10.1111/tri.13404 · Cited by 17
Application of 3D Bioprinting in Urology
Zhao, Y., Liu, Y., Dai, Y., Yang, L., & Guo, C. Y. (2022) · Micromachines · doi:10.3390/mi13071073 · Cited by 17
Selecting the right therapeutic target for kidney disease
Buvall, L., Menzies, R. I., Williams, J. H., Woollard, K. J., Kumar, C., Granqvist, A., Fritsch, M., Féliers, D., Reznichenko, A., Gianni, D., et al. (2022) · Frontiers in Pharmacology · doi:10.3389/fphar.2022.971065 · Cited by 17
Lee, J.-B., Kim, H., Kim, S., & Sung, G. Y. (2022) · Micromachines · doi:10.3390/mi13111932 · Cited by 17
In Vitro Human Tissues via Multi-material 3-D Bioprinting
Kolesky, D. B., Homan, K. A., Skylar‐Scott, M. A., & Lewis, J. A. (2018) · Alternatives to Laboratory Animals · doi:10.1177/026119291804600404 · Cited by 17
Self-citationAdvanced Biomanufacturing Technologies for Micro-physiological Systems
Kim, M. K., Yoon, J., Kim, D., Kim, J., Kim, J.-S., Go, G., Song, J., Son, S., Park, K., Lee, J., et al. (2025) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-025-01330-6 · Cited by 16
Rederer, A., Rose, V., Krüger, R., Schmittutz, L., Swierzy, I., Fischer, L., Thievessen, I., Bauer, J., Friedrich, O., Schiffer, M., et al. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241210384 · Cited by 16
Lee, G., Kim, S. J., & Park, J. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303716 · Cited by 16
Zhang, F., Jozani, K. A., Chakravarty, A., Lin, D. S. Y., Hollinger, A., Rajasekar, S., & Zhang, B. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202402946 · Cited by 16
Wang, X., Guo, C., Chen, Y., Tozzi, L., Szymkowiak, S., Li, C., & Kaplan, D. L. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36858 · Cited by 16
Challenges to future regenerative applications using kidney organoids
Takasato, M., & Wymeersch, F. J. (2020) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.03.003 · Cited by 16
Plant vs. kidney: Evaluating nephrotoxicity of botanicals with the latest toxicological tools
Pearson, A., Gafner, S., Rider, C. V., Embry, M. R., Ferguson, S., & Mitchell, C. A. (2022) · Current Opinion in Toxicology · doi:10.1016/j.cotox.2022.100371 · Cited by 16
Extended longevity geometrically-inverted proximal tubule organoids
Parigoris, E., Lee, J., Liu, A. Y., Zhao, X., & Takayama, S. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121828 · Cited by 16
Building Blood Vessel Chips with Enhanced Physiological Relevance
Mu, X., Gerhard‐Herman, M. D., & Zhang, Y. S. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201778 · Cited by 16
Yue, T., Liu, N., Liu, Y., Peng, Y., Xie, S., Luo, J., Huang, Q., Takeuchi, M., & Fukuda, T. (2019) · Micromachines · doi:10.3390/mi10120840 · Cited by 16
Sheng, L., Li, M., Zheng, S., & Qi, J. (2021) · Journal of Biomaterials Applications · doi:10.1177/08853282211053081 · Cited by 16
Deep Learning-Assisted Nephrotoxicity Testing with Bioprinted Renal Spheroids
Tröndle, K., Miotto, G., Rizzo, L., Pichler, R., Koch, F., Koltay, P., Zengerle, R., Lienkamp, S. S., Kartmann, S., & Zimmermann, S. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i2.528 · Cited by 16
Kidney microphysiological models for nephrotoxicity assessment
Mahadeo, A., Yeung, C. K., Himmelfarb, J., & Kelly, E. J. (2022) · Current Opinion in Toxicology · doi:10.1016/j.cotox.2022.03.002 · Cited by 15
(Bio)fabrication of microfluidic devices and organs-on-a-chip
Hrynevich, A., Li, Y., Cedillo‐Servín, G., Malda, J., & Castilho, M. D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-89831-7.00001-8 · Cited by 15
Kidney Fibrosis In Vitro and In Vivo Models: Path Toward Physiologically Relevant Humanized Models
Addario, G., Moroni, L., & Mota, C. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202403230 · Cited by 15
Tunable Thermoshrinkable Hydrogels for 4D Fabrication of Cell‐Seeded Channels
Marco, G. D., Falandt, M., Neumann, M., Viola, M., Sampon, T., Valverde, M. G., van Genderen, A. M., Mihaila, S. M., van Nostrum, C. F., van Ravensteijn, B. G. P., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202502042 · Cited by 15
Role of Shear Stress on Renal Proximal Tubular Cells for Nephrotoxicity Assays
Birdsall, H. H., & Hammond, T. G. (2021) · Journal of Toxicology · doi:10.1155/2021/6643324 · Cited by 15
Potential Strategies for Kidney Regeneration With Stem Cells: An Overview
Tsuji, K., Kitamura, S., & Wada, J. (2022) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2022.892356 · Cited by 15
Imam, F., Kothiyal, P., Alshehri, S., Afzal, M., Iqbal, M., Khan, M. R., Alanazi, A. A. H., & Anwer, M. K. (2023) · Biomedicines · doi:10.3390/biomedicines11030804 · Cited by 15
Revolutionizing biomedical research: The imperative need for heart–kidney-connected organoids
Song, S.-S., Park, H., Kim, Y. K., & Kang, S. (2024) · APL Bioengineering · doi:10.1063/5.0190840 · Cited by 15
Biofabrication Directions in Recapitulating the Immune System‐on‐a‐Chip
Janssen, R., Benito‐Zarza, L., Cleijpool, P., Valverde, M. G., Mihaila, S. M., Bastiaan‐Net, S., Garssen, J., Willemsen, L. E. M., & Masereeuw, R. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202304569 · Cited by 14
In Situ Bioprinting Enhances Bone Regeneration in a Live Animal Model with Craniofacial Defect
Hindy, O. A., Pinarbasi, B., Bakıcı, M., Demirtaş, O. B., Gökyer, Ş., Büyüksungur, A., Orhan, K., Oto, Ç., & Yilgor, P. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00780 · Cited by 14
Diabetic proximal tubulopathy: Can we mimic the disease for in vitro screening of SGLT inhibitors?
Faria, J., Gerritsen, K. G. F., Nguyen, T. Q., Mihaila, S. M., & Masereeuw, R. (2021) · European Journal of Pharmacology · doi:10.1016/j.ejphar.2021.174378 · Cited by 14
Acute radiation syndrome drug discovery using organ-on-chip platforms
Singh, V. K., & Seed, T. M. (2022) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2022.2099833 · Cited by 14
Advanced bioengineering of female germ cells to preserve fertility
Ghorbani, S., Eyni, H., Norahan, M. H., Zarrintaj, P., Urban, N., Mohammadzadeh, A., Mostafavi, E., & Sutherland, D. S. (2022) · Biology of Reproduction · doi:10.1093/biolre/ioac160 · Cited by 14
Organ mimicking technologies and their applications in drug discovery
Qu, Y., Ye, J., Lin, B., Luo, Y., & Zhang, X. (2023) · Intelligent Pharmacy · doi:10.1016/j.ipha.2023.05.003 · Cited by 14
Vascularization of kidney organoids: different strategies and perspectives
Raykhel, I. B., Nishikawa, M., Sakai, Y., Vainio, S. J., & Skovorodkin, I. (2024) · Frontiers in Urology · doi:10.3389/fruro.2024.1355042 · Cited by 13
Sacrificial strategy towards the formation of vascular‐like networks in volumetric tissue constructs
Buckley, C., Ibrahim, R., Giordano, F., Xu, N., Sems, B., & Wang, H. (2024) · BMEMat · doi:10.1002/bmm2.12118 · Cited by 13
Current status and future prospects of toxicity assessment using organoids
Nguyen, X., & Yoo, J. (2025) · Toxicological Research · doi:10.1007/s43188-025-00298-9 · Cited by 13
Realizations of vascularized tissues: From in vitro platforms to in vivo grafts
Ren, B., Jiang, Z., Murfee, W. L., Katz, A. J., Siemann, D. W., & Huang, Y. H. (2023) · Biophysics Reviews · doi:10.1063/5.0131972 · Cited by 13
Stokar‐Regenscheit, N., Bell, L., Berridge, B. R., Rudmann, D. G., Tagle, D. A., Hargrove-Grimes, P., Schaudien, D., Hahn, K., Kuehnlenz, J., Ashton, R. S., et al. (2024) · Toxicologic Pathology · doi:10.1177/01926233241253811 · Cited by 13
Nephroscreen: A robust and versatile renal tubule-on-a-chip platform for nephrotoxicity assessment
Vriend, J., Vormann, M. K., Lanz, H. L., Joore, J., Trietsch, S. J., Rüssel, F. G. M., Jacobsen, B., Roth, A. B., Lu, S., Polli, J. W., et al. (2021) · Current Opinion in Toxicology · doi:10.1016/j.cotox.2021.03.001 · Cited by 13
Strategies towards kidney tissue biofabrication
Maharjan, S., Bonilla, D., & Zhang, Y. S. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2021.100362 · Cited by 13
Gupta, N. R., Susa, K., & Morizane, R. (2017) · EMJ Reproductive Health · doi:10.33590/emjreprohealth/10310989 · Cited by 13
A bioprinted and scalable model of human tubulo-interstitial kidney fibrosis
Bouwens, D., Kabgani, N., Bergerbit, C., Kim, H., Ziegler, S., Ijaz, S., Abdallah, A. T., Haraszti, T., Maryam, S., Omidinia‐Anarkoli, A., et al. (2024) · Biomaterials · doi:10.1016/j.biomaterials.2024.123009 · Cited by 12
The Space Within: How Architected Voids Promote Tissue Formation
Puiggalí‐Jou, A., Hui, I. B., Rico, C. F., & Zenobi‐Wong, M. (2025) · Advanced Materials · doi:10.1002/adma.202507385 · Cited by 12
Singh, N. K., Kim, J. Y., Jang, J., Kim, Y. K., & Cho, D. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00421 · Cited by 12
Advances in the Construction and Application of Bone‐on‐a‐Chip Based on Microfluidic Technologies
Zhong, C., Tang, Z., Yu, X., Wang, L., Ren, C., Qin, L., & Zhou, P. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35502 · Cited by 12
Ashammakhi, N. A., ELKHAMMAS, E. A., & Hasan, A. (2017) · Transplantation · doi:10.1097/tp.0000000000001896 · Cited by 12
Biofabrication in Tissue Engineering
Bao, G. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_12 · Cited by 12
Kim, S. J., Lee, G., & Park, J. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101326 · Cited by 12
Application of three-dimensional printing technology in renal diseases
Dai, S., Wang, Q., Jiang, Z., Liu, C., Teng, X., Yan, S., Xia, D., Tuo, Z., & Bi, L. (2022) · Frontiers in Medicine · doi:10.3389/fmed.2022.1088592 · Cited by 12
Lung-on-a-chip platforms for modeling disease pathogenesis
Dellaquila, A., Thomée, E., McMillan, A. H., & Lesher‐Pérez, S. C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817202-5.00004-8 · Cited by 12
Advances in 3D tissue models for neural engineering: self-assembled versus engineered tissue models
Wan, S., Robles, U. A. A., Poole-Warren, L. A., & Esrafilzadeh, D. (2024) · Biomaterials Science · doi:10.1039/d4bm00317a · Cited by 11
Biohybrid-engineered tissue platforms: bridging the gap in tissue engineering
Yong, U., Kim, J., & Jang, J. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.05.018 · Cited by 11
Construction of a Multitubular Perfusable Kidney-on-Chip for the Study of Renal Diseases
Lapin, B., Myram, S., Nguyen, M., Gropplero, G., Coscoy, S., & Descroix, S. (2023) · Methods in molecular biology · doi:10.1007/978-1-0716-3179-9_7 · Cited by 11
Vascularizing Organoids to Promote Long-Term Organogenesis on a Chip
Wang, X., Bijonowski, B. M., & Kurniawan, N. A. (2023) · Organoids · doi:10.3390/organoids2040019 · Cited by 11
Xu, X., Qiu, Y., Chen, C., Carton, M., Campbell, P. M. R., Chowdhury, A. M., Bandyopadhyay, B. C., Bentley, W. E., Smith, B. R., & Sochol, R. D. (2025) · Lab on a Chip · doi:10.1039/d4lc01051e · Cited by 11
Cell sources and methods for producing organotypic in vitro human tissue models
Hayden, P. J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817202-5.00002-4 · Cited by 11
3D In Vitro Human Organ Mimicry Devices for Drug Discovery, Development, and Assessment
Rodríguez‐García, A., Oliva, J., Flores, C., & Hosseini, S. (2020) · Advances in Polymer Technology · doi:10.1155/2020/6187048 · Cited by 11
Recent Advances in Kidney Bioengineering
Pregosin, N. C., Bronstein, R. D., & Mallipattu, S. K. (2021) · Frontiers in Pediatrics · doi:10.3389/fped.2021.743301 · Cited by 11
Additive manufacturing in the development of 3D skin tissues
Retting, K. N., & Nguyen, D. G. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-810545-0.00016-4 · Cited by 11
Biomaterials meet organ-on-chips – a perspective on tumor modeling
Monteiro, C. F., Deus, I. A., Custódio, C. A., & Mano, J. F. (2024) · International Materials Reviews · doi:10.1177/09506608241303436 · Cited by 10
Barua, R., Das, D., & Biswas, N. (2025) · Biomicrofluidics · doi:10.1063/5.0268362 · Cited by 10
Yucha, S. E. V., Quackenbush, D., Chu, T., Lo, F., Sutherland, J. J., Kuzu, G., Roberts, C., Luna, F., Barnes, S. W., Walker, J. R., et al. (2022) · PLoS ONE · doi:10.1371/journal.pone.0277937 · Cited by 10
3D-Microprinted PDMS-Based Microfluidic Vessels for Organ-on-a-Chip Applications
Xu, X., Chen, C., Wen, Z., Young, O. M., Felix, B. M., Bandyopadhyay, B. C., Bentley, W. E., & Sochol, R. D. (2024) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/mems58180.2024.10439438 · Cited by 10
Milla, A. E. F., DeMaria, W., Wells, D., Jeon, O., Alsberg, E., & Rolle, M. W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d8f · Cited by 10
Corredera, I. G., Amato, G., Moya‐Rull, D., Garreta, E., & Montserrat, N. (2025) · Kidney International · doi:10.1016/j.kint.2025.01.043 · Cited by 10
Müller, S., Széliová, D., & Zanghellini, J. (2022) · PLoS Computational Biology · doi:10.1371/journal.pcbi.1009843 · Cited by 10
Dynamics of Endothelial Engagement and Filopodia Formation in Complex 3D Microscaffolds
Ucla, P., Ju, X., Melisa, D., Baïz, S., Muller, L., Germain, S., Monnot, C., Semetey, V., & Coscoy, S. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23052415 · Cited by 10
Lapin, B., Vandensteen, J., Gropplero, G., Mazloum, M., Bienaimé, F., Descroix, S., & Coscoy, S. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.022 · Cited by 9
Sanchez-Rubio, A., Hope, L., Barcelona‐Estaje, E., Jayawarna, V., Williams, J. M., & Manuel, S.-S. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214408 · Cited by 9
Human Stem Cell and Organoid Models to Advance Acute Kidney Injury Diagnostics and Therapeutics
Pode‐Shakked, N., & Devarajan, P. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23137211 · Cited by 9
Replacing renal function using bioengineered tissues
Little, M. H., & Rabelink, T. J. (2023) · Nature Reviews Bioengineering · doi:10.1038/s44222-023-00066-0 · Cited by 9
Yang, J., Rong, Y., Chen, X., & He, C. (2023) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202300365 · Cited by 9
Couto, M., Vasconcelos, D. P., Pereira, C. L., Neto, E., Sarmento, B. F. C. C., & Lamghari, M. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202400496 · Cited by 9
Three-dimensional bioprinting vascularized bone tissue
Gharacheh, H., & Güvendiren, M. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00547-y · Cited by 9
Chowdhry, A., Singh, K. P., Gupta, A., Mohana, D., Tomar, S., Puri, V., Jain, A., Sharma, S., Rai, S., Puri, S., et al. (2024) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/09544089241234107 · Cited by 9
Principles of bioreactor design for tissue engineering
Yu, H., Chong, S. K. M., Hassanbhai, A. M., Teng, Y., Balachander, G. M., Muthukumaran, P., Wen, F., & Teoh, S. H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818422-6.00012-5 · Cited by 9
Kidney tissue engineering for precision medicine
Anandakrishnan, N., & Azeloglu, E. U. (2020) · Nature Reviews Nephrology · doi:10.1038/s41581-020-00355-6 · Cited by 9
Additive manufacturing of biomaterials
Torre, M., Giannitelli, S. M., Mauri, E., Trombetta, M., & Rainer, A. (2021) · Advances in chemical engineering · doi:10.1016/bs.ache.2021.03.003 · Cited by 9
3D Print Technology for Cell Culturing
Haldar, S., Lahiri, D., & Roy, P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00005-0 · Cited by 9
Ajay, A. K. (2022) · Kidney360 · doi:10.34067/kid.0007172021 · Cited by 9
Bernardi, M., Dilmen, E., Kurek, D., Lanz, H. L., Joore, J., Hoenderop, J. G. J., Rookmaaker, M. B., & Verhaar, M. C. (2025) · Kidney360 · doi:10.34067/kid.0000000992 · Cited by 8
Engineering organs-on-a-chip via multi-channel microfluidics
Qiu, J., Yang, J. J., Liu, L., Wen, J., Yang, J. J., Shi, W., Gao, X., Sun, J., Bai, L., Liu, X., et al. (2026) · Lab on a Chip · doi:10.1039/d5lc00598a · Cited by 8
Bioinks for Three-Dimensional Printing in Regenerative Medicine
Navarro, J., Calderon, G. A., Miller, J. S., & Fisher, J. P. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00046-1 · Cited by 8
Valencia, L. J., Tseng, M., Chu, M.-L., Yu, L., Adedeji, A. O., & Kiyota, T. (2023) · Toxicological Sciences · doi:10.1093/toxsci/kfad123 · Cited by 8
Dey, S., Kinoshita, M., Puttick, S. G., Rose, S., Trau, M., Roberts, M. J., & Koo, K. M. (2024) · Advanced Sensor Research · doi:10.1002/adsr.202300193 · Cited by 8
Design and engineering of multiorgan systems
Renggli, K., & Frey, O. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817202-5.00012-7 · Cited by 8
Hammond, T. G., & Birdsall, H. H. (2017) · Journal of Toxicology · doi:10.1155/2017/1907952 · Cited by 8
Juul, C. B., Fedosov, S. N., Nexø, E., & Heegaard, C. W. (2018) · Molecular Biology of the Cell · doi:10.1091/mbc.e18-09-0571 · Cited by 8
Kearney, H., Mihaila, S. M., Moroni, L., & Mota, C. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202504719 · Cited by 7
Perfusable 3D models of ureteric bud and collecting duct tubules
Wolf, K. J., van Gaal, R. C., Uzel, S. G. M., Rubins, J. E., Klaus, A. N., Printz, A., Nair, P., Kroll, K. T., Stankey, P. P., Satlin, L. M., et al. (2025) · Cell Biomaterials · doi:10.1016/j.celbio.2025.100297 · Cited by 7
Self-citation3D Printed Tubulointerstitium Chip as an In Vitro Testing Platform
Addario, G., Eussen, D., Djudjaj, S., Boor, P., Moroni, L., & Mota, C. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300440 · Cited by 7
Recent trends in the development of in vitro 3D kidney models
Gaddam, K., Chameettachal, S., Yeleswarapu, S., Duin, S., Lode, A., Gelinsky, M., Akkineni, A. R., & Pati, F. (2025) · Biofabrication · doi:10.1088/1758-5090/adb999 · Cited by 7
Osafune, K. (2021) · Artificial Organs · doi:10.1111/aor.13943 · Cited by 7
DMD-based rapid 3D bioprinting for precision tissue engineering and regenerative medicine
Yu, C., You, S., Zhu, W. Z., Sun, B., & Chen, S. (2020) · Emerging Digital Micromirror Device-based Systems and Applications · doi:10.1117/12.2550340 · Cited by 7
3D printing equipment in medicine
Bhat, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102542-0.00012-9 · Cited by 7
Farahani, M., Carthew, J., Bhowmik, S., Shard, C., Nunez-Nescolarde, A. B., Gomez, G. A., Cadarso, V. J., Combes, A. N., & Frith, J. E. (2022) · Biointerphases · doi:10.1116/6.0002034 · Cited by 7
Recent Advances in 3 D Printing in the Design and Application of Biopolymer‐Based Scaffolds
Milojević, M., Maver, U., & Vihar, B. (2023) · Wiley eBooks · doi:10.1002/9783527827657.ch17 · Cited by 7
Engineering Strategies to Move from Understanding to Steering Renal Tubulogenesis
Hagelaars, M. J., Rijns, L., Dankers, P. Y. W., Loerakker, S., & Bouten, C. V. C. (2022) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2022.0120 · Cited by 7
Development of a hollow fibre-based renal module for active transport studies
Englezakis, A., Gozalpour, E., Kamran, M., Fenner, K. S., Mele, E., & Coopman, K. (2021) · Journal of Artificial Organs · doi:10.1007/s10047-021-01260-w · Cited by 7
Kiranmai, G., Alam, A., Chameettachal, S., Khandelwal, M., & Pati, F. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09505 · Cited by 6
Metadata
- Authors
- Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A.
- Affiliations
- F. Hoffmann-La Roche AG (CH)
- Harvard University (US)
- Corresponding author
- Moisan, Annie
- Lewis, Jennifer A.
- Venue
- Scientific Reports
- Published
- 2016-10-11
- Volume
- 6
- Issue
- 1
- Pages
- 34845-34845
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5057112
- OpenAlex
- W2530360197
- Cited by
- 699
- References
- 42
- Citations by year
- 2026: 46 · 2025: 64 · 2024: 68 · 2023: 68 · 2022: 83 · 2021: 91 · 2020: 84 · 2019: 74 · 2018: 71 · 2017: 48 · 2016: 1
- FWCI
- 31.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- Funders
- National Science Foundation (1548261)
- Hansjörg Wyss Institute for Biologically Inspired Engineering, Harvard University
- Division of Civil, Mechanical and Manufacturing Innovation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bioprinting, proximal tubule, extracellular matrix, epithelial barrier function, cyclosporine nephrotoxicity, drug screening, disease modeling
- MeSH terms
- Cells, Cultured, Drug Evaluation, Preclinical, Epithelial Cells, Extracellular Matrix, Humans, Kidney Tubules, Proximal, Organ Culture Techniques, Perfusion, Cyclosporine, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.