Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Three-dimensional models of kidney tissue that recapitulate human responses are needed for drug screening, disease modeling, and, ultimately, kidney organ engineering. Here, we report a bioprinting method for creating 3D human renal proximal tubules in vitro that are fully embedded within an extracellular matrix and housed in perfusable tissue chips, allowing them to be maintained for greater than two months. Their convoluted tubular architecture is circumscribed by proximal tubule epithelial cells and actively perfused through the open lumen. These engineered 3D proximal tubules on chip exhibit significantly enhanced epithelial morphology and functional properties relative to the same cells grown on 2D controls with or without perfusion. Upon introducing the nephrotoxin, Cyclosporine A, the epithelial barrier is disrupted in a dose-dependent manner. Our bioprinting method provides a new route for programmably fabricating advanced human kidney tissue models on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [67]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Differential Diagnosis of Glomerular Disease: A Systematic and Inclusive Approach
Hebert, L. A., Parikh, S., Prosek, J., Nadasdy, T., & Rovin, B. H. (2013) · American Journal of Nephrology · doi:10.1159/000354390 · Cited by 4,376
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis
Takasato, M., Er, P. X., Chiu, H. S., Maier, B., Baillie, G. J., Ferguson, C., Parton, R. G., Wolvetang, E. J., Roost, M. S., Chuva de Sousa Lopes, S. M., et al. (2015) · Nature · doi:10.1038/nature15695 · Cited by 1,627
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Self-citationNephron organoids derived from human pluripotent stem cells model kidney development and injury
Morizane, R., Lam, A. Q., Freedman, B. S., Kishi, S., Valerius, M. T., & Bonventre, J. V. (2015) · Nature Biotechnology · doi:10.1038/nbt.3392 · Cited by 927
Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment
Jang, K.-J., Mehr, A. P., Hamilton, G. A., McPartlin, L. A., Chung, S., Suh, K.-Y., & Ingber, D. E. (2013) · Integrative Biology · doi:10.1039/c3ib40049b · Cited by 849
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationFreedman, B. S., Brooks, C. R., Lam, A. Q., Fu, H., Morizane, R., Agrawal, V., Saad, A. F., Li, M. K., Hughes, M. R., Werff, R. V., et al. (2015) · Nature Communications · doi:10.1038/ncomms9715 · Cited by 780
Takasato, M., Er, P. X., Becroft, M., Vanslambrouck, J. M., Stanley, E. G., Elefanty, A. G., & Little, M. H. (2014) · Nature Cell Biology · doi:10.1038/ncb2894 · Cited by 720
Research works printed but not linked: 2
- Naughton, C. A. Drug-induced nephrotoxicity. Am. Fam. Physician 78, 743–750 (2008).
- Price, G. & Tien, J. In Biological Microarrays Vol. 671 Methods in Molecular Biology (eds Ali, Khademhosseini, Kahp-Yang, Suh & Mohammed, Zourob ) Ch. 17, 281–293 (Humana Press, 2011).
Cited by
Items 101–200 of 751
Bioprinting of 3D tissues/organs combined with microfluidics
Ma, J., Wang, Y., & Liu, J. (2018) · RSC Advances · doi:10.1039/c8ra03022g · Cited by 113
Emerging Kidney Models to Investigate Metabolism, Transport, and Toxicity of Drugs and Xenobiotics
Bajaj, P., Chowdhury, S. K., Yucha, R. W., Kelly, E. J., & Xiao, G. (2018) · Drug Metabolism and Disposition · doi:10.1124/dmd.118.082958 · Cited by 123
Bioprinters for organs-on-chips
Miri, A. K., Mostafavi, E., Khorsandi, D., Hu, S.-K., Malpica, M., & Khademhosseini, A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2798 · Cited by 121
Dabbagh, S. R., Sarabi, M. R., Birtek, M. T., Mustafaoğlu, N., Zhang, Y. S., & Taşoğlu, S. (2022) · Aggregate · doi:10.1002/agt2.197 · Cited by 119
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 118
3D bioprinting of complex channels within cell-laden hydrogels
Ji, S., Almeida, E., & Güvendiren, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.038 · Cited by 118
Fang, Y., Guo, Y., Liu, T., Xu, R., Mao, S., Mo, X., Zhang, T., Ouyang, L., Xiong, Z., & Sun, W. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100011 · Cited by 117
Projection-Based 3D Printing of Cell Patterning Scaffolds with Multiscale Channels
Xue, D., Wang, Y., Zhang, J., Mei, D., Wang, Y., & Chen, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03867 · Cited by 116
Lee, S. J., Jeong, W., & Atala, A. (2024) · Advanced Materials · doi:10.1002/adma.202408032 · Cited by 116
In Vitro Strategies to Vascularize 3D Physiologically Relevant Models
Dellaquila, A., Le Bao, C., Letourneur, D., & Simon‐Yarza, T. (2021) · Advanced Science · doi:10.1002/advs.202100798 · Cited by 115
The Role of Microfluidics for Organ on Chip Simulations
Aziz, A. U. R., Geng, C., Fu, M., Yu, X., Qin, K., & Liu, B. (2017) · Bioengineering · doi:10.3390/bioengineering4020039 · Cited by 115
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 115
The emergence of 3D bioprinting in organ-on-chip systems
Fetah, K., Tebon, P., Goudie, M. J., Eichenbaum, J., Ren, L., Barros, N., Nasiri, R., Ahadian, S., Ashammakhi, N., Dokmeci, M. R., et al. (2019) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab23df · Cited by 98
Liu, S., Kumari, S., He, H., Mishra, P., Singh, B. N., Singh, D., Liu, S., Srivastava, P., & Li, C. (2023) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2023.115285 · Cited by 112
Harley, W. S., Li, C. C., Toombs, J. T., O’Connell, C. D., Taylor, H., Heath, D. E., & Collins, D. J. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00147 · Cited by 110
Tissue engineering: current status and future perspectives
Chandra, P. K., Söker, S., & Atala, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818422-6.00004-6 · Cited by 109
3D proximal tubule-on-chip model derived from kidney organoids with improved drug uptake
Aceves, J. O., Heja, S., KOBAYASHI, K. P., Robinson, S. S., Miyoshi, T., Matsumoto, T., Schäffers, O. J. M., Morizane, R., & Lewis, J. A. (2022) · Scientific Reports · doi:10.1038/s41598-022-19293-3 · Cited by 108
Self-citationAddressing Unmet Clinical Needs with 3D Printing Technologies
Ghosh, U., Ning, S., Wang, Y., & Kong, Y. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800417 · Cited by 107
3D printed coaxial nozzles for the extrusion of hydrogel tubes toward modeling vascular endothelium
Millik, S. C., Dostie, A. M., Karis, D., Smith, P. T., McKenna, M., Chan, N. R., Curtis, C., Nance, E. A., Theberge, A. B., & Nelson, A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2b4d · Cited by 107
3D Printing/Bioprinting Based Tailoring of in Vitro Tissue Models: Recent Advances and Challenges
Mehrotra, S., Moses, J. C., Bandyopadhyay, A., & Mandal, B. B. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00073 · Cited by 104
3D printing in personalized medicines: A focus on applications of the technology
Pavan Kalyan, B. G., Mehrotra, S., Marques, S. M., Kumar, L., & Verma, R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105875 · Cited by 104
3D Bioprinted Vascularized Tumour for Drug Testing
Han, S., Kim, S., Chen, Z., Shin, H. K., Lee, S.-Y., Moon, H. E., Paek, S. H., & Park, S. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21082993 · Cited by 103
Beheshtizadeh, N., Gharibshahian, M., Pazhouhnia, Z., Rostami, M., Zangi, A. R., Maleki, R., Azar, H. K., Zalouli, V., Rajavand, H., Farzin, A., et al. (2022) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2022.113431 · Cited by 103
Peela, N., Truong, D., Saini, H., Chu, H., Mashaghi, S., Ham, S. L., Singh, S., Tavana, H., Mosadegh, B., & Nikkhah, M. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.04.017 · Cited by 91
Kreller, T., Distler, T., Heid, S., Gerth, S., Detsch, R., & Boccaccini, A. R. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109877 · Cited by 102
Carletto, R. P., Ko, S. K., Caviglia, C., Wolff, A., Emnéus, J., Keller, S. S., & Dufva, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.047 · Cited by 102
Bioengineered 3D Models to Recapitulate Tissue Fibrosis
Sacchi, M., Bansal, R., & Rouwkema, J. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.010 · Cited by 92
Complex 3D bioprinting methods
Ji, S., & Güvendiren, M. (2021) · APL Bioengineering · doi:10.1063/5.0034901 · Cited by 100
A review of 3D bio-printing for bone and skin tissue engineering: a commercial approach
Beheshtizadeh, N., Lotfibakhshaiesh, N., Pazhouhnia, Z., Hoseinpour, M., & Nafari, M. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-04259-0 · Cited by 99
Immunosuppressive drugs modes of action
Meneghini, M., Bestard, O., & Grinyo, J. M. (2021) · Best Practice & Research Clinical Gastroenterology · doi:10.1016/j.bpg.2021.101757 · Cited by 99
Engineering and monitoring cellular barrier models
Yeste, J., Illa, X., Álvarez, M., & Villa, R. (2018) · Journal of Biological Engineering · doi:10.1186/s13036-018-0108-5 · Cited by 100
Vormann, M. K., Vriend, J., Lanz, H. L., Gijzen, L., van den Heuvel, A., Hutter, S., Joore, J., Trietsch, S. J., Stuut, C., Nieskens, T. T. G., et al. (2021) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2021.01.028 · Cited by 87
InVADE: integrated vasculature for assessing dynamic events
Lai, B. F. L., Huyer, L. D., Lu, R. X. Z., Drecun, S., Radisic, M., & Zhang, B. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703524 · Cited by 97
3D organ models—Revolution in pharmacological research?
Weinhart, M., Hocke, A. C., Hippenstiel, S., Kurreck, J., & Hedtrich, S. (2018) · Pharmacological Research · doi:10.1016/j.phrs.2018.11.002 · Cited by 97
Mimicking Epithelial Tissues in Three-Dimensional Cell Culture Models
Torras, N., García-Díaz, M., Fernández‐Majada, V., & Martínez, E. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00197 · Cited by 98
Screening of Drug-Transporter Interactions in a 3D Microfluidic Renal Proximal Tubule on a Chip
Vriend, J., Nieskens, T. T. G., Vormann, M. K., van den Berge, B. T., van den Heuvel, A., Russel, F. G. M., Suter-Dick, L., Lanz, H. L., Vulto, P., Masereeuw, R., et al. (2018) · The AAPS Journal · doi:10.1208/s12248-018-0247-0 · Cited by 95
Tissue engineering toward organ-specific regeneration and disease modeling
Mandrycky, C., Phong, K. T., & Zheng, Y. Y. (2017) · MRS Communications · doi:10.1557/mrc.2017.58 · Cited by 96
3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility
Weems, A. C., Pérez-Madrigal, M. M., Arno, M. C., & Dove, A. P. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01539 · Cited by 87
Engineering Tissue Barrier Models on Hydrogel Microfluidic Platforms
Vera, D., García-Díaz, M., Torras, N., Álvarez, M., Villa, R., & Martínez, E. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c21573 · Cited by 95
Sun, H. R., Yuan, J. Y., Dong, H., Dong, D., & Zheng, J. (2019) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2019.10.006 · Cited by 94
Microphysiological Systems: Design, Fabrication, and Applications
Wang, K., Man, K., Liu, J., Liu, Y., Chen, Q., Zhou, Y., & Yang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01667 · Cited by 90
Shamma, R. N., Sayed, R. H., Madry, H., Sayed, N. S. E., & Cucchiarini, M. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0026 · Cited by 88
Sakolish, C., Weber, E. J., Kelly, E. J., Himmelfarb, J., Mouneimne, R., Grimm, F. A., House, J. S., Wade, T., Han, A., Chiu, W. A., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-33099-2 · Cited by 82
3D bioprinting strategy for engineering vascularized tissue models
Chae, S., Ha, D., & Lee, H. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.748 · Cited by 88
Organ-on-a-chip for assessing environmental toxicants
Cho, S., & Yoon, J. (2017) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.11.019 · Cited by 87
Tavafoghi, M., Darabi, M. A., Mahmoodi, M., Tutar, R., Xu, C., Mirjafari, A., Billi, F., Święszkowski, W., Nasrollahi, F., Ahadian, S., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0b9a · Cited by 85
Synovial joint-on-a-chip for modeling arthritis: progress, pitfalls, and potential
Li, Z. A., Sant, S., Cho, S. K., Goodman, S. B., Bunnell, B. A., Tuan, R. S., Gold, M. S., & Lin, H. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.07.011 · Cited by 85
Vriend, J., Peters, J. G. P., Nieskens, T. T. G., Škovroňová, R., Blaimschein, N., Schmidts, M., Roepman, R., Schirris, T. J. J., Rüssel, F. G. M., Masereeuw, R., et al. (2019) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2019.129433 · Cited by 84
3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks
Choi, Y., Park, H., Ha, D., Yun, H., Yi, H., & Lee, H. (2021) · Polymers · doi:10.3390/polym13030366 · Cited by 84
Recent Advances in Organ‐on‐Chips Integrated with Bioprinting Technologies for Drug Screening
Rezaei, N. T., Kumar, H., Liu, H., Lee, S. S., Park, S. S., & Kim, K. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203172 · Cited by 83
Hwang, D. G., Choi, Y., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.685507 · Cited by 80
Li, S. R., Gulieva, R. E., Helms, L., Cruz, N. M., Vincent, T., Fu, H., Himmelfarb, J., & Freedman, B. (2022) · Nature Communications · doi:10.1038/s41467-022-35537-2 · Cited by 80
Vessel-on-a-chip models for studying microvascular physiology, transport, and function in vitro
Moses, S. R., Adorno, J. J., Palmer, A. F., & Song, J. W. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00355.2020 · Cited by 80
Bioprinting of kidney in vitro models: cells, biomaterials, and manufacturing techniques
Fransen, M. F. J., Addario, G., Bouten, C. V. C., Halary, F. A., Moroni, L., & Mota, C. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200158 · Cited by 79
4D Printing for Vascular Tissue Engineering: Progress and Challenges
Zeenat, L., Zolfagharian, A., Yeleswarapu, S., Sasikumar, S., Bodaghi, M., & Pati, F. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300200 · Cited by 78
3D bioprinting of cell-laden hydrogels for advanced tissue engineering
Blaeser, A., Campos, D. F. D., & Fischer, H. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.003 · Cited by 77
3D Bioprinting and its application to organ-on-a-chip
Park, J. Y., Jang, J., & Kang, H. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.08.004 · Cited by 79
The crossing and integration between microfluidic technology and 3D printing for organ-on-chips
Mi, S., Du, Z., Xu, Y., & Sun, W. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01661e · Cited by 77
Bonventre, J. V., Hurst, F. P., West, M. R., Wu, I., Roy‐Chaudhury, P., & Sheldon, M. I. (2019) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.02570319 · Cited by 76
Review of extrusion-based multi-material bioprinting processes
Betancourt, N., & Chen, D. (2022) · Bioprinting · doi:10.1016/j.bprint.2021.e00189 · Cited by 76
3D bioprinting: Materials, processes, and applications
Bártolo, P., Malshe, A. P., Ferraris, E., & Koç, B. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.06.001 · Cited by 77
Bioprinting on Organ-on-Chip: Development and Applications
Chliara, M. A., Elezoglou, S., & Zergioti, I. (2022) · Biosensors · doi:10.3390/bios12121135 · Cited by 76
Building three-dimensional lung models for studying pharmacokinetics of inhaled drugs
Barros, A. S., Costa, A., & Sarmento, B. F. C. C. (2020) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2020.09.008 · Cited by 76
Sensing of tubular flow and renal electrolyte transport
Verschuren, E. H. J., Castenmiller, C., Peters, D. J. M., Arjona, F. J., Bindels, R. J. M., & Hoenderop, J. G. J. (2020) · Nature Reviews Nephrology · doi:10.1038/s41581-020-0259-8 · Cited by 75
Development of a high-performance open-source 3D bioprinter
Tashman, J. W., Shiwarski, D. J., & Feinberg, A. W. (2022) · Scientific Reports · doi:10.1038/s41598-022-26809-4 · Cited by 74
Ashammakhi, N. A., Darabi, M. A., Çelebi‐Saltik, B., Tutar, R., Hartel, M. C., Lee, J., Hussein, S. M., Goudie, M. J., Cornelius, M. B., Dokmeci, M. R., et al. (2019) · Small Methods · doi:10.1002/smtd.201900589 · Cited by 74
A perfusable, vascularized kidney organoid-on-chip model
Kroll, K. T., Homan, K. A., Uzel, S. G. M., Mata, M. M., Wolf, K. J., Rubins, J. E., & Lewis, J. A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad5ac0 · Cited by 73
Self-citationOxburgh, L. H., Carroll, T. J., Cleaver, O. B., Gossett, D. R., Hoshizaki, D. K., Hubbell, J. A., Humphreys, B. D., Jain, S., Jensen, J., Kaplan, D. L., et al. (2017) · Journal of the American Society of Nephrology · doi:10.1681/asn.2016101077 · Cited by 73
Bassi, G., Grimaudo, M. A., Panseri, S., & Montesi, M. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031195 · Cited by 73
Sunildutt, N., Parihar, P., Salih, A. R. C., Lee, S. H., & Choi, K. H. (2023) · Frontiers in Pharmacology · doi:10.3389/fphar.2023.1139229 · Cited by 71
RPTEC/TERT1 cells form highly differentiated tubules when cultured in a 3D matrix
Secker, P. F., Luks, L., Schlichenmaier, N., & Dietrich, D. R. (2017) · ALTEX · doi:10.14573/altex.1710181 · Cited by 71
Engineered Vasculature for Organ-on-a-Chip Systems
Aazmi, A., Zhou, H., Li, Y., Yu, M., Xu, X., Wu, Y., Ma, L., Zhang, B., & Yang, H. (2021) · Engineering · doi:10.1016/j.eng.2021.06.020 · Cited by 69
Microfluidic trends in drug screening and drug delivery
Feng, J., Neužil, J., Manz, A., Iliescu, C., & Neužil, P. (2022) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2022.116821 · Cited by 70
Recent advances in 3D-printing-based organ-on-a-chip
Wu, X., Shi, W., Liu, X., & Gu, Z. (2024) · EngMedicine · doi:10.1016/j.engmed.2024.100003 · Cited by 68
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 69
Youhanna, S. C., Kemas, A. M., Preiss, L. C., Zhou, Y., Shen, J. X., Cakal, S. D., Paqualini, F. S., Goparaju, S. K., Shafagh, R. Z., Lind, J. U., et al. (2022) · Pharmacological Reviews · doi:10.1124/pharmrev.120.000238 · Cited by 67
Application Status of Sacrificial Biomaterials in 3D Bioprinting
Liu, S., Wang, T., Li, S., & Wang, X. (2022) · Polymers · doi:10.3390/polym14112182 · Cited by 67
Reconstructing the Human Renal Vascular–Tubular Unit In Vitro
Rayner, S. G., Phong, K. T., Xue, J., Lih, D., Shankland, S. J., Kelly, E. J., Himmelfarb, J., & Zheng, Y. Y. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801120 · Cited by 68
Whole Organ Engineering: Approaches, Challenges, and Future Directions
Sohn, S., Buskirk, M. V., Buckenmeyer, M. J., Londoño, R., & Faulk, D. M. (2020) · Applied Sciences · doi:10.3390/app10124277 · Cited by 67
Rothbauer, M., Eilenberger, C., Spitz, S., Bachmann, B., Kratz, S. R. A., Reihs, E. I., Windhager, R., Toegel, S., & Ertl, P. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.837087 · Cited by 66
Rutz, A. L., Lewis, P. L., & Shah, R. N. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.162 · Cited by 67
Direct process feedback in extrusion-based 3D bioprinting
Armstrong, A. A., Norato, J. A., Alleyne, A. G., & Johnson, A. J. W. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4d97 · Cited by 66
3D bioprinting from the micrometer to millimeter length scales: Size does matter
Hinton, T. J., Lee, A. R., & Feinberg, A. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.02.004 · Cited by 65
Substrate curvature affects the shape, orientation, and polarization of renal epithelial cells
Yu, S.-M., Oh, J. M., Lee, J., Lee‐Kwon, W., Jung, W., Amblard, F., Granick, S., & Cho, Y. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.019 · Cited by 65
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems
Fritschen, A., & Blaeser, A. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120556 · Cited by 65
Kumar, D., Nadda, R., & Repaka, R. (2024) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-024-03062-7 · Cited by 64
Hedegaard, C. L., & Mata, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab84cb · Cited by 58
Kidney-on-a-Chip: Mechanical Stimulation and Sensor Integration
Wang, D., Gust, M. J., & Ferrell, N. J. (2022) · Sensors · doi:10.3390/s22186889 · Cited by 64
Developments with 3D bioprinting for novel drug discovery
Satpathy, A., Datta, P., Wu, Y. B., Ayan, B., Bayram, E., & Ozbolat, I. T. (2018) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2018.1542427 · Cited by 63
van Genderen, A. M., Jansen, K., Kristen, M., van Duijn, J., Li, Y., Schuurmans, C. C. L., Malda, J., Vermonden, T., Jansen, J., Masereeuw, R., et al. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.617364 · Cited by 63
Recent Advances in Microfluidic Platforms for Programming Cell‐Based Living Materials
Zhang, P., Shao, N., & Qin, L. (2021) · Advanced Materials · doi:10.1002/adma.202005944 · Cited by 63
Directing the growth and alignment of biliary epithelium within extracellular matrix hydrogels
Lewis, P. L., Yan, M., Su, J., & Shah, R. N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.039 · Cited by 61
Kidney Disease Modeling with Organoids and Organs-on-Chips
Musah, S., Bhattacharya, R., & Himmelfarb, J. (2024) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-072623-044010 · Cited by 61
Modeling organ-specific vasculature with organ-on-a-chip devices
Lin, D. S. Y., Guo, F., & Zhang, B. (2018) · Nanotechnology · doi:10.1088/1361-6528/aae7de · Cited by 61
Beyond PDMS and Membranes: New Materials for Organ-on-a-Chip Devices
Radisic, M., & Loskill, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00831 · Cited by 61
Advancing Organoid Engineering for Tissue Regeneration and Biofunctional Reconstruction
Jin, H., Xue, Z., Liu, J., Ma, B., Yang, J., & Lei, L. (2024) · Biomaterials Research · doi:10.34133/bmr.0016 · Cited by 60
Kim, J. J., & Cho, D. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2395470 · Cited by 60
Proximal tubule apical endocytosis is modulated by fluid shear stress via an mTOR-dependent pathway
Long, K. R., Shipman, K. E., Rbaibi, Y., Menshikova, E. V., Ritov, V. B., Gliozzi, M. L., Jiang, Y., Jackson, E. K., Baty, C. J., & Weisz, O. A. (2017) · Molecular Biology of the Cell · doi:10.1091/mbc.e17-04-0211 · Cited by 62
Bone-chip system to monitor osteogenic differentiation using optical imaging
Sheyn, D., Yakubovich, D. C., Ben‐David, S., Mel, S. D., Chan, V., Hinojosa, C. D., Wen, N., Hamilton, G. A., Gazit, D., & Gazit, Z. (2019) · Microfluidics and Nanofluidics · doi:10.1007/s10404-019-2261-7 · Cited by 60
3D bioprinting: A powerful tool to leverage tissue engineering and microbial systems
Saygılı, E., Doğan, A. A., Yeşil-Çeliktaş, Ö., & Draz, M. S. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00071 · Cited by 60
Metadata
- Authors
- Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A.
- Affiliations
- F. Hoffmann-La Roche AG (CH)
- Harvard University (US)
- Corresponding author
- Moisan, Annie
- Lewis, Jennifer A.
- Venue
- Scientific Reports
- Published
- 2016-10-11
- Volume
- 6
- Issue
- 1
- Pages
- 34845-34845
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5057112
- OpenAlex
- W2530360197
- Cited by
- 699
- References
- 42
- Citations by year
- 2026: 46 · 2025: 64 · 2024: 68 · 2023: 68 · 2022: 83 · 2021: 91 · 2020: 84 · 2019: 74 · 2018: 71 · 2017: 48 · 2016: 1
- FWCI
- 31.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- Funders
- National Science Foundation (1548261)
- Hansjörg Wyss Institute for Biologically Inspired Engineering, Harvard University
- Division of Civil, Mechanical and Manufacturing Innovation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bioprinting, proximal tubule, extracellular matrix, epithelial barrier function, cyclosporine nephrotoxicity, drug screening, disease modeling
- MeSH terms
- Cells, Cultured, Drug Evaluation, Preclinical, Epithelial Cells, Extracellular Matrix, Humans, Kidney Tubules, Proximal, Organ Culture Techniques, Perfusion, Cyclosporine, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.