Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Three-dimensional models of kidney tissue that recapitulate human responses are needed for drug screening, disease modeling, and, ultimately, kidney organ engineering. Here, we report a bioprinting method for creating 3D human renal proximal tubules in vitro that are fully embedded within an extracellular matrix and housed in perfusable tissue chips, allowing them to be maintained for greater than two months. Their convoluted tubular architecture is circumscribed by proximal tubule epithelial cells and actively perfused through the open lumen. These engineered 3D proximal tubules on chip exhibit significantly enhanced epithelial morphology and functional properties relative to the same cells grown on 2D controls with or without perfusion. Upon introducing the nephrotoxin, Cyclosporine A, the epithelial barrier is disrupted in a dose-dependent manner. Our bioprinting method provides a new route for programmably fabricating advanced human kidney tissue models on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [67]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Differential Diagnosis of Glomerular Disease: A Systematic and Inclusive Approach
Hebert, L. A., Parikh, S., Prosek, J., Nadasdy, T., & Rovin, B. H. (2013) · American Journal of Nephrology · doi:10.1159/000354390 · Cited by 4,376
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis
Takasato, M., Er, P. X., Chiu, H. S., Maier, B., Baillie, G. J., Ferguson, C., Parton, R. G., Wolvetang, E. J., Roost, M. S., Chuva de Sousa Lopes, S. M., et al. (2015) · Nature · doi:10.1038/nature15695 · Cited by 1,627
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Self-citationNephron organoids derived from human pluripotent stem cells model kidney development and injury
Morizane, R., Lam, A. Q., Freedman, B. S., Kishi, S., Valerius, M. T., & Bonventre, J. V. (2015) · Nature Biotechnology · doi:10.1038/nbt.3392 · Cited by 927
Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment
Jang, K.-J., Mehr, A. P., Hamilton, G. A., McPartlin, L. A., Chung, S., Suh, K.-Y., & Ingber, D. E. (2013) · Integrative Biology · doi:10.1039/c3ib40049b · Cited by 849
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationFreedman, B. S., Brooks, C. R., Lam, A. Q., Fu, H., Morizane, R., Agrawal, V., Saad, A. F., Li, M. K., Hughes, M. R., Werff, R. V., et al. (2015) · Nature Communications · doi:10.1038/ncomms9715 · Cited by 780
Takasato, M., Er, P. X., Becroft, M., Vanslambrouck, J. M., Stanley, E. G., Elefanty, A. G., & Little, M. H. (2014) · Nature Cell Biology · doi:10.1038/ncb2894 · Cited by 720
Research works printed but not linked: 2
- Naughton, C. A. Drug-induced nephrotoxicity. Am. Fam. Physician 78, 743–750 (2008).
- Price, G. & Tien, J. In Biological Microarrays Vol. 671 Methods in Molecular Biology (eds Ali, Khademhosseini, Kahp-Yang, Suh & Mohammed, Zourob ) Ch. 17, 281–293 (Humana Press, 2011).
Cited by
Items 701–751 of 751
Engineering Polymeric Scaffolds for Studying Neural Tissue Development, Pathology, and Repair
Schimelman, J. B. (2023) · eScholarship (California Digital Library)
遺伝子導入マウスヘパトーマ細胞を用いた中空糸型バイオ人工肝臓装置の設計および評価
藤井, 祐. (2021) · Institutional Repositories DataBase (IRDB)
A 3D Bioprinted Hydrogel Microfluidic Device for Screening Applications
Bhusal, A. (2023) · Rowan Digitals Works (Rowan University)
Engineering 3D perfusion platforms for recapitulating immune responses in vascularized models
Zhang, F. (2024) · MacSphere (McMaster University) · doi:10.71548/18786
Juste Lanas, Y., & García Aznar, J. M. (2023) · Zaguan (University of Zaragoza Repository)
Гоженко, А. І., Żukow, W., Gozhenko, O., & Ivanov, D. D. (2025) · Pedagogy and Psychology of Sport · doi:10.12775/pps.2025.28.67748
Innovations in Skin Regeneration: The Intersection of 3D Bioprinting and Single-Cell RNA Sequencing
Hyun, J. (2026) · International journal of high school research · doi:10.36838/v8i2.75
Avcı, B. G. (2024) · Dspace Repository (Marmara Üniversitesi)
Bioengineering Functional Grafts for Tracheal Regeneration
Varma, R. (2021) · TSpace (University of Toronto)
Rakotozandriny, K. (2019) · theses.fr (ABES) · doi:10.70675/a42d9399ze1eaz4b49z8c8cz69aa05a8d946
Experimental and computational methods for monitoring of dynamic arterial cellular organization
Chashchiná, O. (2020) · theses.fr (ABES) · doi:10.70675/8e1eab05z6fb7z467bza238z406981a36fcd
Micro-Usinage par laser femtoseconde : Fabrication d'une microfibre glomérulaire perfusée
Vérit, I. (2020) · theses.fr (ABES) · doi:10.70675/48f15f18z8b73z464cz9462z6ec70cfbb380
Faucher, Q. (2021) · theses.fr (ABES) · doi:10.70675/041226aez33d7z4fbdzb88ez6e4632e03dbb
Développement d'un modèle bio-imprimé de muqueuse humaine
Boucard, E. (2021) · theses.fr (ABES) · doi:10.70675/85387666z7b89z40c6z94b2zb6a7f7dca842
Development of a biomimetic multitube system in the case of the ADPKD
Myram, S. (2020) · theses.fr (ABES) · doi:10.70675/c98f29bbz7d68z445az955dz1e062d759a8f
Study of cell-matrix interactions in complex geometries generated by two-photon photopolymerization
Ucla, P. (2024) · theses.fr (ABES) · doi:10.70675/507c9fe9z1aa2z425fzbee3zb1bc24f2bfe1
Introduction and Need for 3D Printing in Biomedical Applications
Sharma, A., Shavita, Jangra, J., Patial, S. K., & Singh, S. (2026) · Springer eBooks · doi:10.1007/978-981-95-6774-4_1
Reconfigurable acoustic self-assembly driven by Faraday waves on micropatterned Petri dishes
Yang, X., Peng, Q., Guo, C., Huang, M., Zhang, Y., Zhang, B., Wu, Q., & Qian, J. (2026) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2026.140147
Shi, J., Zhou, M., Bai, Z., Gu, Y., Qu, P., Li, G., Liang, Q., Cheng, P., & Shu, Q. (2026) · International Journal of Bioprinting · doi:10.36922/ijb026120097
Non-animal Models in Research and Teaching: Organoids and Organs-on-Chips
Teakel, S. L., Walduck, A. K., Connolly, J. H., & Vanniasinkam, T. (2026) · Springer eBooks · doi:10.1007/978-981-92-0038-2_16
Wang, Y., Shao, X., Liao, Z., Zheng, C., Wang, G., & Huang, Y. (2026) · Analytical Chemistry · doi:10.1021/acs.analchem.6c03028
New insights in tumor-on-a-chip models for studying cancer drug resistance
Wang, Y., Shi, L., Li, J., Zhang, X., Ren, J., Jia, Q., Lv, L., Yang, L., Zhang, Z., Yang, J., et al. (2026) · Pathology - Research and Practice · doi:10.1016/j.prp.2026.156562
Araki, Y., Koyama, T., Takao, H., Nakano, D., & Terao, K. (2026) · Research Square · doi:10.21203/rs.3.rs-9842488/v1
Schmidt, I., Fuhrmann, E., Pernevik, E., Linke, P., Kuzmenko, V., Meisner, A., Namro, I., Guttenberg, Z., & Hartmann, H. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.215036
Research Progress of 3D Bioprinting in Tissue Engineering of Major Urinary Organs
周, 虹. (2026) · Advances in Clinical Medicine · doi:10.12677/acm.2026.1662416
313Chapter 11 Bioprinting in Reformative Medicine
Dubey, M., Kacker, R., Singh, S., & Arora, A. (2026) · De Gruyter eBooks · doi:10.1515/9783111719993-011
Evolving models of proximal tubule nephrotoxicity
Kshirsagar, A., & Vanslambrouck, J. M. (2026) · Current Opinion in Toxicology · doi:10.1016/j.cotox.2026.100603
Dairaghi, J., Joseph, D., Petrache, H. I., & Moldovan, N. I. (2026) · Bioengineering · doi:10.3390/bioengineering13070838
Tao, Y., Bernal, P. N., Rodriguez, N. G., Bouwmeester, M., Walraven, T., Wanders, D., Kock, L. M., van Heck, N., Schneeberger, K., van der Laan, L. J. W., et al. (2026) · Cells · doi:10.3390/cells15151342
Ekengwu, I. E., Anyadike, D. C., Ilechukwu, A. E., & Onyegirim, S. N. K. (2026) · 3D Printing Innovations · doi:10.54963/3dpi.v1i2.100439
Bioprinting Vascularized Tissue Constructs
Muller, N., Hansen, O., & Bianchi, E. (2023) · International Archives of Biomedicine, Life sciences and Bioengineering · doi:10.5281/zenodo.19542550
Biomaterials in organoid research: current state and future directions
Klasen, L., Nasehi, R., Selzener, L., & Laporte, L. D. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1895558
King, E., & Atala, A. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-30151-3.00016-4
The Role of Artificial Organs in Blood Purification
Philippe, R., & Holler, S. (2026) · Springer eBooks · doi:10.1007/978-3-032-27033-7_16
Hydrogels and microfluidics: toward more physiologically relevant organ-on-a-chip models
Taromian, F., Mahmoudi, N., Aguilar, L. C., Stamp, M. E. M., Collins, D. J., & Nisbet, D. R. (2026) · Lab on a Chip · doi:10.1039/d6lc00628k
Lahane, V., Mohale, D., & Chandewar, A. V. (2026) · Research Journal of Multidisciplinary Bulletin · doi:10.68007/rjmb.2026.v5.iss3.p5
Rajestari, Z., Clark, C. T., Smith, Q., & Kulinsky, L. (2026) · Biofabrication · doi:10.1088/1758-5090/aea7df
Sensor-Integrated Organ-on-a-Chip Platforms: Advances in Drug Evaluation and Disease Modeling
Huang, Z., Zhang, Y., Li, Y., Li, Y., Xue, Z., Chen, M., Li, W., Li, W., Zhang, Y., Zheng, L., et al. (2026) · ACS Sensors · doi:10.1021/acssensors.6c00932
Pharmaceutical applications of 3D printing: drug delivery, discovery, and development
Gorwill, L., Wu, K. Y., Marchand, M., & Tran, S. D. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-34207-3.00029-0
Sunilkumar, A., & Kasoju, N. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-33889-2.00003-0
Microfabrication techniques for making organ-on-a-chip and body-on-a-chip devices
Azizgolshani, H., & Borenstein, J. T. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-16110-0.00021-2
Advancements in kidney-on-chip applications in (patho-)physiology, toxicology, and pharmacology
van Genderen, A. M., Masereeuw, R., & Mihaila, S. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-16110-0.00016-9
FAIRsharing record for: (Re)Building a Kidney
FAIRsharing Team, & Pearlman, L. (2022) · FAIRsharing.org · doi:10.25504/fairsharing.78d3ad
Scocozza, F., & Conti, M. (2026) · Advances in chemical engineering · doi:10.1016/bs.ache.2026.08.002
do Couto, M. A. M. (2025) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT)
Mosina, Kumari, S., Sharma, P., Hasan, M. R., Suleman, S., Malhotra, N., & Narang, J. (2026) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-026-00636-9
Lacueva-Aparicio, A., Lindoso, R. S., Mihăilă, S. M., & Giménez, I. (2022) · doi:10.3389/fphys.2022.1048738.s001
Metadata
- Authors
- Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A.
- Affiliations
- F. Hoffmann-La Roche AG (CH)
- Harvard University (US)
- Corresponding author
- Moisan, Annie
- Lewis, Jennifer A.
- Venue
- Scientific Reports
- Published
- 2016-10-11
- Volume
- 6
- Issue
- 1
- Pages
- 34845-34845
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5057112
- OpenAlex
- W2530360197
- Cited by
- 699
- References
- 42
- Citations by year
- 2026: 46 · 2025: 64 · 2024: 68 · 2023: 68 · 2022: 83 · 2021: 91 · 2020: 84 · 2019: 74 · 2018: 71 · 2017: 48 · 2016: 1
- FWCI
- 31.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- Funders
- National Science Foundation (1548261)
- Hansjörg Wyss Institute for Biologically Inspired Engineering, Harvard University
- Division of Civil, Mechanical and Manufacturing Innovation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bioprinting, proximal tubule, extracellular matrix, epithelial barrier function, cyclosporine nephrotoxicity, drug screening, disease modeling
- MeSH terms
- Cells, Cultured, Drug Evaluation, Preclinical, Epithelial Cells, Extracellular Matrix, Humans, Kidney Tubules, Proximal, Organ Culture Techniques, Perfusion, Cyclosporine, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.