Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Three-dimensional models of kidney tissue that recapitulate human responses are needed for drug screening, disease modeling, and, ultimately, kidney organ engineering. Here, we report a bioprinting method for creating 3D human renal proximal tubules in vitro that are fully embedded within an extracellular matrix and housed in perfusable tissue chips, allowing them to be maintained for greater than two months. Their convoluted tubular architecture is circumscribed by proximal tubule epithelial cells and actively perfused through the open lumen. These engineered 3D proximal tubules on chip exhibit significantly enhanced epithelial morphology and functional properties relative to the same cells grown on 2D controls with or without perfusion. Upon introducing the nephrotoxin, Cyclosporine A, the epithelial barrier is disrupted in a dose-dependent manner. Our bioprinting method provides a new route for programmably fabricating advanced human kidney tissue models on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [67]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Differential Diagnosis of Glomerular Disease: A Systematic and Inclusive Approach
Hebert, L. A., Parikh, S., Prosek, J., Nadasdy, T., & Rovin, B. H. (2013) · American Journal of Nephrology · doi:10.1159/000354390 · Cited by 4,376
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis
Takasato, M., Er, P. X., Chiu, H. S., Maier, B., Baillie, G. J., Ferguson, C., Parton, R. G., Wolvetang, E. J., Roost, M. S., Chuva de Sousa Lopes, S. M., et al. (2015) · Nature · doi:10.1038/nature15695 · Cited by 1,627
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Self-citationNephron organoids derived from human pluripotent stem cells model kidney development and injury
Morizane, R., Lam, A. Q., Freedman, B. S., Kishi, S., Valerius, M. T., & Bonventre, J. V. (2015) · Nature Biotechnology · doi:10.1038/nbt.3392 · Cited by 927
Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment
Jang, K.-J., Mehr, A. P., Hamilton, G. A., McPartlin, L. A., Chung, S., Suh, K.-Y., & Ingber, D. E. (2013) · Integrative Biology · doi:10.1039/c3ib40049b · Cited by 849
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationFreedman, B. S., Brooks, C. R., Lam, A. Q., Fu, H., Morizane, R., Agrawal, V., Saad, A. F., Li, M. K., Hughes, M. R., Werff, R. V., et al. (2015) · Nature Communications · doi:10.1038/ncomms9715 · Cited by 780
Takasato, M., Er, P. X., Becroft, M., Vanslambrouck, J. M., Stanley, E. G., Elefanty, A. G., & Little, M. H. (2014) · Nature Cell Biology · doi:10.1038/ncb2894 · Cited by 720
Research works printed but not linked: 2
- Naughton, C. A. Drug-induced nephrotoxicity. Am. Fam. Physician 78, 743–750 (2008).
- Price, G. & Tien, J. In Biological Microarrays Vol. 671 Methods in Molecular Biology (eds Ali, Khademhosseini, Kahp-Yang, Suh & Mohammed, Zourob ) Ch. 17, 281–293 (Humana Press, 2011).
Cited by
Human organs-on-chips for disease modelling, drug development and personalized medicine
Ingber, D. E. (2022) · Nature Reviews Genetics · doi:10.1038/s41576-022-00466-9 · Cited by 1,589
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Advances in organ-on-a-chip engineering
Zhang, B., Korolj, A., Lai, B. F. L., & Radisic, M. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0034-7 · Cited by 1,017
Flow-enhanced vascularization and maturation of kidney organoids in vitro
Homan, K. A., Gupta, N., Kroll, K. T., Kolesky, D. B., Skylar-Scott, M., Miyoshi, T., Mau, D., Valerius, M. T., Ferrante, T., Bonventre, J. V., et al. (2019) · Nature Methods · doi:10.1038/s41592-019-0325-y · Cited by 939
Self-citationModelling cancer in microfluidic human organs-on-chips
Sontheimer-Phelps, A., Hassell, B. A., & Ingber, D. E. (2019) · Nature Reviews Cancer · doi:10.1038/s41568-018-0104-6 · Cited by 906
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Nguyen, P. Q., Courchesne, N. D., Duraj‐Thatte, A., Praveschotinunt, P., & Joshi, N. S. (2018) · Advanced Materials · doi:10.1002/adma.201704847 · Cited by 566
Unagolla, J. M., & Jayasuriya, A. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 544
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Cellular and molecular mechanisms of kidney fibrosis
Djudjaj, S., & Boor, P. (2019) · Molecular Aspects of Medicine · doi:10.1016/j.mam.2018.06.002 · Cited by 475
Tubuloids derived from human adult kidney and urine for personalized disease modeling
Schutgens, F., Rookmaaker, M. B., Margaritis, T., Rios, A., Ammerlaan, C., Jansen, J., Gijzen, L., Vormann, M., Vonk, A., Viveen, M., et al. (2019) · Nature Biotechnology · doi:10.1038/s41587-019-0048-8 · Cited by 449
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
Organ-on-a-chip devices advance to market
Zhang, B., & Radisic, M. (2017) · Lab on a Chip · doi:10.1039/c6lc01554a · Cited by 437
Extracellular Matrix in Kidney Fibrosis: More Than Just a Scaffold
Bülow, R. D., & Boor, P. (2019) · Journal of Histochemistry & Cytochemistry · doi:10.1369/0022155419849388 · Cited by 406
3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions
Rodrigues, J., Heinrich, M. A., Teixeira, L. M., & Prakash, J. (2021) · Trends in Cancer · doi:10.1016/j.trecan.2020.10.009 · Cited by 405
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Tumor microenvironment: barrier or opportunity towards effective cancer therapy
Tiwari, A., Trivedi, R., & Lin, S.-Y. (2022) · Journal of Biomedical Science · doi:10.1186/s12929-022-00866-3 · Cited by 377
Renal reabsorption in 3D vascularized proximal tubule models
Lin, N. Y. C., Homan, K. A., Robinson, S. S., Kolesky, D. B., Duarte, N., Moisan, A., & Lewis, J. A. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1815208116 · Cited by 358
Self-citationOrganoids — Preclinical Models of Human Disease
Li, M., & Izpisua Belmonte, J. C. (2019) · New England Journal of Medicine · doi:10.1056/nejmra1806175 · Cited by 355
Advances in Hydrogels in Organoids and Organs‐on‐a‐Chip
Liu, H., Wang, Y., Cui, K., Guo, Y., Zhang, X., & Qin, J. (2019) · Advanced Materials · doi:10.1002/adma.201902042 · Cited by 353
Bioprinting: From Tissue and Organ Development to in Vitro Models
Mota, C., Camarero-Espinosa, S., Baker, M. B., Wieringa, P., & Moroni, L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00789 · Cited by 345
Decellularized matrices in regenerative medicine
Taylor, D. A., Sampaio, L. C., Ferdous, Z., Gobin, A. S., & Taite, L. J. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.044 · Cited by 337
Daly, A. C., Prendergast, M. E., Hughes, A. J., & Burdick, J. A. (2021) · Cell · doi:10.1016/j.cell.2020.12.002 · Cited by 332
4D-bioprinted silk hydrogels for tissue engineering
Kim, S. H., Seo, Y. B., Yeon, Y. K., Lee, Y. J., Park, H. S., Sultan, M. T., Lee, J. M., Lee, J. S., Lee, O. J., Hong, H., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120281 · Cited by 329
Organ-on-a-chip platforms: a convergence of advanced materials, cells, and microscale technologies
Ahadian, S., Civitarese, R., Bannerman, D., Mohammadi, M. H., Lu, R., Wang, E., Davenport‐Huyer, L., Lai, B., Zhang, B., Zhao, Y., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700506 · Cited by 315
3D bioprinting for drug discovery and development in pharmaceutics
Peng, W., Datta, P., Ayan, B., Ozbolat, V., Sosnoski, D., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.025 · Cited by 313
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
Multiscale bioprinting of vascularized models
Miri, A. K., Khalilpour, A., Cecen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 267
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
3D printed drug delivery and testing systems — a passing fad or the future?
Lim, S. H., Kathuria, H., Tan, J. J. Y., & Kang, L. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.05.006 · Cited by 252
Organs-on-a-chip models for biological research
Vunjak-Novakovic, G., Ronaldson-Bouchard, K., & Radisic, M. (2021) · Cell · doi:10.1016/j.cell.2021.08.005 · Cited by 248
“, 2019), kidney glomerulus and proximal tubule (Zhou et al., 2016; Homan et al., 2016), neuromuscular junction (Afshar Bakooshli et al.”
BackgroundComplex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237
The Many Faces of Calcineurin Inhibitor Toxicity—What the FK?
Farouk, S. S., & Rein, J. L. (2020) · Advances in Chronic Kidney Disease · doi:10.1053/j.ackd.2019.08.006 · Cited by 234
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2020) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 234
Effective bioprinting resolution in tissue model fabrication
Miri, A. K., Mirzaee, I., Hassan, S., Mesbah Oskui, S., Nieto, D., Khademhosseini, A., & Zhang, Y. S. (2019) · Lab on a Chip · doi:10.1039/c8lc01037d · Cited by 232
Emergence of microfluidics for next generation biomedical devices
Preetam, S., Nahak, B. K., Patra, S., Toncu, D. C., Park, S., Syväjärvi, M., Orive, G., & Tiwari, A. (2022) · Biosensors and Bioelectronics X · doi:10.1016/j.biosx.2022.100106 · Cited by 225
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
4D printing: Recent advances and proposals in the food sector
Teng, X., Zhang, M., & Mujumdar, A. S. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.01.076 · Cited by 216
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Swieszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 213
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 209
Fang, W., Yang, M., Wang, L., Li, W., Liu, M., Jin, Y., Wang, Y., Yang, R., Wang, Y., Zhang, K., et al. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.759 · Cited by 199
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Schöneberg, J., De Lorenzi, F., Theek, B., Blaeser, A., Rommel, D., Kuehne, A. J. C., Kießling, F., & Fischer, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-28715-0 · Cited by 196
Forbes, T. A., Howden, S. E., Lawlor, K., Phipson, B., Maksimovic, J., Hale, L., Wilson, S., Quinlan, C., Ho, G., Holman, K., et al. (2018) · The American Journal of Human Genetics · doi:10.1016/j.ajhg.2018.03.014 · Cited by 194
3D Printing of Organs-On-Chips
Yi, H.-G., Lee, H., & Cho, D.-W. (2017) · Bioengineering · doi:10.3390/bioengineering4010010 · Cited by 193
Advances in predictive in vitro models of drug-induced nephrotoxicity
Soo, J. Y.-C., Jansen, J., Masereeuw, R., & Little, M. H. (2018) · Nature Reviews Nephrology · doi:10.1038/s41581-018-0003-9 · Cited by 191
Chitosan-based inks for 3D printing and bioprinting
Taghizadeh, M., Taghizadeh, A., Yazdi, M. K., Zarrintaj, P., Stadler, F. J., Ramsey, J. D., Habibzadeh, S., Hosseini Rad, S., Naderi, G., Saeb, M. R., et al. (2022) · Green Chemistry · doi:10.1039/d1gc01799c · Cited by 191
Athirasala, A., Tahayeri, A., Thrivikraman, G., França, C. M., Monteiro, N., Tran, V., Ferracane, J., & Bertassoni, L. E. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9b4e · Cited by 189
Gao, G., Park, J. Y., Kim, B. S., Jang, J., & Cho, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201801102 · Cited by 185
Advances in Engineering Human Tissue Models
Moysidou, C.-M., Barberio, C., & Owens, R. M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.620962 · Cited by 179
Tissue Engineering and Regenerative Medicine: New Trends and Directions—A Year in Review
Gomes, M. E., Rodrigues, M. T., Domingues, R. M. A., & Reis, R. L. (2017) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2017.0081 · Cited by 179
Kidney-on-a-chip: untapped opportunities
Ashammakhi, N., Wesseling-Perry, K., Hasan, A., Elkhammas, E., & Zhang, Y. S. (2018) · Kidney International · doi:10.1016/j.kint.2018.06.034 · Cited by 175
Shin, Y. J., Shafranek, R. T., Tsui, J. H., Walcott, J., Nelson, A., & Kim, D.-H. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.11.006 · Cited by 174
Clinical Applications of 3D Printing
Ballard, D. H., Trace, A. P., Ali, S., Hodgdon, T., Zygmont, M. E., DeBenedectis, C. M., Smith, S. E., Richardson, M. L., Patel, M. J., Decker, S. J., et al. (2018) · Academic Radiology · doi:10.1016/j.acra.2017.08.004 · Cited by 170
Kidney-based in vitro models for drug-induced toxicity testing
Faria, J., Ahmed, S., Gerritsen, K. G. F., Mihaila, S. M., & Masereeuw, R. (2019) · Archives of Toxicology · doi:10.1007/s00204-019-02598-0 · Cited by 168
Engineering of Hydrogel Materials with Perfusable Microchannels for Building Vascularized Tissues
Xie, R., Zheng, W., Guan, L., Ai, Y., & Liang, Q. (2020) · Small · doi:10.1002/smll.201902838 · Cited by 167
Essential steps in bioprinting: From pre- to post-bioprinting
Datta, P., Barui, A., Wu, Y., Ozbolat, V., Moncal, K. K., & Ozbolat, I. T. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.06.003 · Cited by 165
Application of 3D bioprinting in the prevention and the therapy for human diseases
Yi, H.-G., Kim, H., Kwon, J., Choi, Y.-J., Jang, J., & Cho, D.-W. (2021) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-021-00566-8 · Cited by 164
Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct
Kang, D., Hong, G., An, S., Jang, I., Yun, W., Shim, J., & Jin, S. (2020) · Small · doi:10.1002/smll.201905505 · Cited by 164
Nair, M., Johal, R. K., Hamaia, S. W., Best, S. M., & Cameron, R. E. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120109 · Cited by 164
Three-dimensional cell-printing of advanced renal tubular tissue analogue
Singh, N. K., Han, W., Nam, S. A., Kim, J. W., Kim, J. Y., Kim, Y. K., & Cho, D. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119734 · Cited by 164
Pharmaceutical Applications of 3D Printing
Chen, G., Xu, Y., Chi Lip Kwok, P., & Kang, L. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101209 · Cited by 162
Naturally-Derived Biomaterials for Tissue Engineering Applications
Brovold, M., Almeida, J. I., Pla-Palacín, I., Sainz-Arnal, P., Sánchez-Romero, N., Rivas, J. J., Almeida, H., Dachary, P. R., Serrano-Aulló, T., Soker, S., et al. (2018) · Advances in Experimental Medicine and Biology · doi:10.1007/978-981-13-0947-2_23 · Cited by 160
Microfluidic bioprinting for organ-on-a-chip models
Yu, F., & Choudhury, D. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2019.03.025 · Cited by 160
Bioprinting Vasculature: Materials, Cells and Emergent Techniques
Tomasina, C., Bodet, T., Mota, C., Moroni, L., & Camarero‐Espinosa, S. (2019) · Materials · doi:10.3390/ma12172701 · Cited by 159
Kinstlinger, I. S., Saxton, S. H., Calderon, G. A., Ruiz, K. V., Yalacki, D. R., Deme, P. R., Rosenkrantz, J. E., Louis-Rosenberg, J. D., Johansson, F., Janson, K. D., et al. (2020) · Nature Biomedical Engineering · doi:10.1038/s41551-020-0566-1 · Cited by 159
Porous polymeric materials by 3D printing of photocurable resin
Mu, X., Bertron, T., Dunn, C., Qiao, H., Wu, J., Zhao, Z., Saldaña, C., & Qi, H. J. (2017) · Materials Horizons · doi:10.1039/c7mh00084g · Cited by 158
Three-dimensional printing with sacrificial materials for soft matter manufacturing
O’Bryan, C. S., Bhattacharjee, T., Niemi, S. R., Balachandar, S., Baldwin, N., Ellison, S. T., Taylor, C. R., Sawyer, W. G., & Angelini, T. E. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.167 · Cited by 154
Addressing the ethical issues raised by synthetic human entities with embryo-like features
Aach, J., Lunshof, J. E., Iyer, E. P. R., & Church, G. M. (2017) · eLife · doi:10.7554/elife.20674 · Cited by 152
Recent advances in 3D printing with protein-based inks
Mu, X., Agostinacchio, F., Xiang, N., Pei, Y., Khan, Y., Guo, C., Cebe, P., Motta, A., & Kaplan, D. L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101375 · Cited by 152
Advances in Gelatin Bioinks to Optimize Bioprinted Cell Functions
Asim, S., Tabish, T. A., Liaqat, U., Ozbolat, I. T., & Rizwan, M. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203148 · Cited by 152
Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering
Yu, J., Park, S. A., Kim, W. D., Ha, T., Xin, Y.-Z., Lee, J. H., & Lee, D. (2020) · Polymers · doi:10.3390/polym12122958 · Cited by 151
Preparation and Use of Decellularized Extracellular Matrix for Tissue Engineering
McInnes, A. D., Moser, M., & Chen, D. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040240 · Cited by 151
A bioink blend for rotary 3D bioprinting tissue engineered small-diameter vascular constructs
Freeman, S. R., Ramos, R., Chando, P. A., Zhou, L., Reeser, K., Jin, S., Soman, P., & Ye, K. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.06.052 · Cited by 150
Tissue and Organ 3D Bioprinting
Xia, Z., Jin, S., & Ye, K. (2018) · SLAS TECHNOLOGY · doi:10.1177/2472630318760515 · Cited by 149
3D Printed Neural Regeneration Devices
Joung, D., Lavoie, N., Guo, S., Park, S. H., Parr, A. M., & McAlpine, M. C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906237 · Cited by 149
Kidney Organoids: A Translational Journey
Morizane, R., & Bonventre, J. V. (2017) · Trends in Molecular Medicine · doi:10.1016/j.molmed.2017.01.001 · Cited by 145
Emulating Human Tissues and Organs: A Bioprinting Perspective Toward Personalized Medicine
Fonseca, A. C., Melchels, F. P. W., Ferreira, M. J. S., Moxon, S. R., Potjewyd, G., Dargaville, T. R., Kimber, S. J., & Domingos, M. A. N. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00342 · Cited by 143
Bioink Formulation and Machine Learning-Empowered Bioprinting Optimization
Freeman, S. R., Calabro, S., Williams, R., Jin, S., & Ye, K. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.913579 · Cited by 143
Organoid-on-a-chip model of human ARPKD reveals mechanosensing pathomechanisms for drug discovery
Hiratsuka, K., Miyoshi, T., Kroll, K. T., Gupta, N. R., Valerius, M. T., Ferrante, T., Yamashita, M., Lewis, J. A., & Morizane, R. (2022) · Science Advances · doi:10.1126/sciadv.abq0866 · Cited by 140
Self-citationEmerging trends in organ-on-a-chip systems for drug screening
Wang, Y., Gao, Y., Pan, Y., Zhou, D., Liu, Y., Yin, Y. B., Yang, J., Wang, Y., & Song, Y. (2023) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2023.02.006 · Cited by 139
Nephrotoxicity and Kidney Transport Assessment on 3D Perfused Proximal Tubules
Vormann, M. K., Gijzen, L., Hutter, S., Boot, L., Nicolas, A., van den Heuvel, A., Vriend, J., Ng, C. P., Nieskens, T. T. G., van Duinen, V., et al. (2018) · The AAPS Journal · doi:10.1208/s12248-018-0248-z · Cited by 138
3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review
Carvalho, V. M., Gonçalves, I. M., Lage, T., Rodrigues, R. O., Minas, G. M. H., Teixeira, S., Moita, A., Hori, T., Kaji, H., & Lima, R. A. (2021) · Sensors · doi:10.3390/s21093304 · Cited by 138
Developments and Opportunities for 3D Bioprinted Organoids
Ya, R., Yang, X. F., Ma, Z., Sun, X., Zhang, Y., Li, W., Yang, H. S., Qiang, L., Yang, Z., Liu, Y., et al. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i3.364 · Cited by 138
Organ‐On‐A‐Chip Platforms: A Convergence of Advanced Materials, Cells, and Microscale Technologies
Ahadian, S., Civitarese, R., Bannerman, D., Mohammadi, M. H., Lu, R. X. Z., Wang, E. Y., Huyer, L. D., Lai, B., Zhang, B., Zhao, Y., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800734 · Cited by 138
Human-Derived Organ-on-a-Chip for Personalized Drug Development
Jodat, Y. A., Kang, M., Kiaee, K., Kim, G. J., Martinez, A. F. H., Rosenkranz, A., Bae, H., & Shin, S. R. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190308150055 · Cited by 135
Multi-material digital light processing bioprinting of hydrogel-based microfluidic chips
Bhusal, A., Dogan, E., Nguyen, H.-A., Labutina, O., Nieto, D., Khademhosseini, A., & Miri, A. K. (2021) · Biofabrication · doi:10.1088/1758-5090/ac2d78 · Cited by 134
Solid Organ Bioprinting: Strategies to Achieve Organ Function
Jorgensen, A. M., Yoo, J. J., & Atala, A. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00145 · Cited by 130
Applications, advancements, and challenges of 3D bioprinting in organ transplantation
Huang, G., Zhao, Y., Chen, D., Wei, L., Hu, Z., Li, J., Zhou, X., Yang, B., & Chen, Z. (2024) · Biomaterials Science · doi:10.1039/d3bm01934a · Cited by 130
3D Tissue and Organ Printing—Hope and Reality
Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202003751 · Cited by 129
Human organoids as 3D in vitro platforms for drug discovery: opportunities and challenges
Wang, D., Villenave, R., Stokar‐Regenscheit, N., & Clevers, H. C. (2025) · Nature Reviews Drug Discovery · doi:10.1038/s41573-025-01317-y · Cited by 129
3D Cell Printed Tissue Analogues: A New Platform for Theranostics
Choi, Y., Yi, H., Kim, S.-W., & Cho, D. (2017) · Theranostics · doi:10.7150/thno.19396 · Cited by 126
Distler, T., McDonald, K., Heid, S., Karakaya, E., Detsch, R., & Boccaccini, A. R. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00677 · Cited by 126
Organ-on-a-chip platforms for accelerating the evaluation of nanomedicine
Chen, X., Zhang, Y. S., Zhang, X., & Liu, C. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.022 · Cited by 125
Metadata
- Authors
- Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A.
- Affiliations
- F. Hoffmann-La Roche AG (CH)
- Harvard University (US)
- Corresponding author
- Moisan, Annie
- Lewis, Jennifer A.
- Venue
- Scientific Reports
- Published
- 2016-10-11
- Volume
- 6
- Issue
- 1
- Pages
- 34845-34845
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5057112
- OpenAlex
- W2530360197
- Cited by
- 699
- References
- 42
- Citations by year
- 2026: 46 · 2025: 64 · 2024: 68 · 2023: 68 · 2022: 83 · 2021: 91 · 2020: 84 · 2019: 74 · 2018: 71 · 2017: 48 · 2016: 1
- FWCI
- 31.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- Funders
- National Science Foundation (1548261)
- Hansjörg Wyss Institute for Biologically Inspired Engineering, Harvard University
- Division of Civil, Mechanical and Manufacturing Innovation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bioprinting, proximal tubule, extracellular matrix, epithelial barrier function, cyclosporine nephrotoxicity, drug screening, disease modeling
- MeSH terms
- Cells, Cultured, Drug Evaluation, Preclinical, Epithelial Cells, Extracellular Matrix, Humans, Kidney Tubules, Proximal, Organ Culture Techniques, Perfusion, Cyclosporine, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.