Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Three-dimensional models of kidney tissue that recapitulate human responses are needed for drug screening, disease modeling, and, ultimately, kidney organ engineering. Here, we report a bioprinting method for creating 3D human renal proximal tubules in vitro that are fully embedded within an extracellular matrix and housed in perfusable tissue chips, allowing them to be maintained for greater than two months. Their convoluted tubular architecture is circumscribed by proximal tubule epithelial cells and actively perfused through the open lumen. These engineered 3D proximal tubules on chip exhibit significantly enhanced epithelial morphology and functional properties relative to the same cells grown on 2D controls with or without perfusion. Upon introducing the nephrotoxin, Cyclosporine A, the epithelial barrier is disrupted in a dose-dependent manner. Our bioprinting method provides a new route for programmably fabricating advanced human kidney tissue models on demand.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In this context, the fast development of new fabrication techniques, such as 3D bioprinting, has led to a general decline in the cost and the specialized work involved in fabricating these chips [65 -67].”
From 3D In Vitro Model (R)evolution: Unveiling Tumor–Stroma Interactions (2021) · cites this paper as [67]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Differential Diagnosis of Glomerular Disease: A Systematic and Inclusive Approach
Hebert, L. A., Parikh, S., Prosek, J., Nadasdy, T., & Rovin, B. H. (2013) · American Journal of Nephrology · doi:10.1159/000354390 · Cited by 4,376
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationRapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Kidney organoids from human iPS cells contain multiple lineages and model human nephrogenesis
Takasato, M., Er, P. X., Chiu, H. S., Maier, B., Baillie, G. J., Ferguson, C., Parton, R. G., Wolvetang, E. J., Roost, M. S., Chuva de Sousa Lopes, S. M., et al. (2015) · Nature · doi:10.1038/nature15695 · Cited by 1,627
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Self-citationNephron organoids derived from human pluripotent stem cells model kidney development and injury
Morizane, R., Lam, A. Q., Freedman, B. S., Kishi, S., Valerius, M. T., & Bonventre, J. V. (2015) · Nature Biotechnology · doi:10.1038/nbt.3392 · Cited by 927
Human kidney proximal tubule-on-a-chip for drug transport and nephrotoxicity assessment
Jang, K.-J., Mehr, A. P., Hamilton, G. A., McPartlin, L. A., Chung, S., Suh, K.-Y., & Ingber, D. E. (2013) · Integrative Biology · doi:10.1039/c3ib40049b · Cited by 849
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationFreedman, B. S., Brooks, C. R., Lam, A. Q., Fu, H., Morizane, R., Agrawal, V., Saad, A. F., Li, M. K., Hughes, M. R., Werff, R. V., et al. (2015) · Nature Communications · doi:10.1038/ncomms9715 · Cited by 780
Takasato, M., Er, P. X., Becroft, M., Vanslambrouck, J. M., Stanley, E. G., Elefanty, A. G., & Little, M. H. (2014) · Nature Cell Biology · doi:10.1038/ncb2894 · Cited by 720
Research works printed but not linked: 2
- Naughton, C. A. Drug-induced nephrotoxicity. Am. Fam. Physician 78, 743–750 (2008).
- Price, G. & Tien, J. In Biological Microarrays Vol. 671 Methods in Molecular Biology (eds Ali, Khademhosseini, Kahp-Yang, Suh & Mohammed, Zourob ) Ch. 17, 281–293 (Humana Press, 2011).
Cited by
Items 201–300 of 751
Ching, T., Toh, Y., Hashimoto, M., & Zhang, Y. S. (2021) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2021.05.007 · Cited by 60
Recent progress of 3D printed vascularized tissues and organs
Zheng, K., Chai, M., Luo, B., Cheng, K., Wang, Z., Li, N., & Shi, X. (2024) · Smart Materials in Medicine · doi:10.1016/j.smaim.2024.01.001 · Cited by 60
Bottom-up biofabrication using microfluidic techniques
Nie, M., & Takeuchi, S. (2018) · Biofabrication · doi:10.1088/1758-5090/aadef9 · Cited by 59
Wunner, F. M., Eggert, S., Maartens, J. H., Bas, O., Dalton, P. D., De‐Juan‐Pardo, E. M., & Hutmacher, D. W. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0149 · Cited by 59
Engineering Organ-on-a-Chip to Accelerate Translational Research
Ko, J., Park, D., Lee, S., Gümüşcü, B., & Jeon, N. L. (2022) · Micromachines · doi:10.3390/mi13081200 · Cited by 59
Shaughnessey, E. M., Kann, S. H., Azizgolshani, H., Black, L. D., Charest, J. L., & Vedula, E. M. (2022) · Scientific Reports · doi:10.1038/s41598-022-16590-9 · Cited by 59
Bioprinting Scaffolds for Vascular Tissues and Tissue Vascularization
Hauser, P. V., Chang, H.-M., Nishikawa, M., Kimura, H., Yanagawa, N., & Hamon, M. (2021) · Bioengineering · doi:10.3390/bioengineering8110178 · Cited by 58
3D Bioprinting: Recent Trends and Challenges
Chameettachal, S., Yeleswarapu, S., Sasikumar, S., Shukla, P., Hibare, P., Bera, A. K., Bojedla, S. S. R., & Pati, F. (2019) · Journal of the Indian Institute of Science · doi:10.1007/s41745-019-00113-z · Cited by 57
Multi-organ-on-a-chip for pharmacokinetics and toxicokinetic study of drugs
Sung, J. H. (2021) · Expert Opinion on Drug Metabolism & Toxicology · doi:10.1080/17425255.2021.1908996 · Cited by 58
An insight on advances and applications of 3d bioprinting: A review
Bejoy, A. M., Makkithaya, K. N., Hunakunti, B. B., Hegde, A., Krishnamurthy, K., Sarkar, A., Lobo, C. F., Keshav, D. V. S., Gopal, D., Dhivya Dharshini, S., et al. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00176 · Cited by 58
Biomimetic models of the glomerulus
Valverde, M. G., Mille, L. S., Figler, K. P., Cervantes, E., Li, V. Y., Bonventre, J. V., Masereeuw, R., & Zhang, Y. S. (2022) · Nature Reviews Nephrology · doi:10.1038/s41581-021-00528-x · Cited by 57
History and Trends of 3D Bioprinting
Thayer, P., Martinez, H., & Gatenholm, E. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_1 · Cited by 56
Advanced Fabrication Techniques of Microengineered Physiological Systems
Puryear, J. R., Yoon, J., & Kim, Y. (2020) · Micromachines · doi:10.3390/mi11080730 · Cited by 56
A sequential 3D bioprinting and orthogonal bioconjugation approach for precision tissue engineering
Yu, C., Miller, K. L., Schimelman, J. B., Wang, P., Zhu, W. Z., Ma, X., Tang, M., You, S., Lakshmipathy, D. R., He, F., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120294 · Cited by 56
Fluid flow to mimic organ function in 3D in vitro models
Juste-Lanas, Y., Hervás-Raluy, S., García‐Aznar, J. M., & González‐Loyola, A. (2023) · APL Bioengineering · doi:10.1063/5.0146000 · Cited by 55
Brain-on-a-chip Devices for Drug Screening and Disease Modeling Applications
Miccoli, B., Braeken, D., & Li, Y. E. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190220161254 · Cited by 54
Open-source hybrid 3D-bioprinter for simultaneous printing of thermoplastics and hydrogels
Koch, F., Thaden, O., Tröndle, K., Zengerle, R., Zimmermann, S., & Koltay, P. (2021) · HardwareX · doi:10.1016/j.ohx.2021.e00230 · Cited by 54
3D Bioprinting for Spinal Cord Injury Repair
Yuan, T., Zhang, J., Yu, T., Wu, J., & Liu, Q. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.847344 · Cited by 53
Bone and Joint‐on‐Chip Platforms: Construction Strategies and Applications
Du, C., Liu, J., Liu, S., Xiao, P., Chen, Z., Chen, H., Huang, W., & Lei, Y. (2024) · Small Methods · doi:10.1002/smtd.202400436 · Cited by 53
Shpichka, A. I., Bikmulina, P., Peshkova, M., Kosheleva, N. V., Михайловна, З. И., Zahmatkesh, E., Rad, N. K., Lipina, M., Голубева, Е. Н., Butnaru, D. V., et al. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i4.302 · Cited by 52
Cancer-on-a-chip for precision cancer medicine
Liu, L., Wang, H., Chen, R., Song, Y., Wei, W., Baek, D. S. H., Gillin, M., Kurabayashi, K., & Chen, W. (2025) · Lab on a Chip · doi:10.1039/d4lc01043d · Cited by 52
Cardiovascular tissue bioprinting: Physical and chemical processes
Hu, J. B., Tomov, M. L., Buikema, J. W., Chen, C. S., Mahmoudi, M., Wu, S. M., & Serpooshan, V. (2018) · Applied Physics Reviews · doi:10.1063/1.5048807 · Cited by 52
Microfluidic bioprinting towards a renal in vitro model
Addario, G., Djudjaj, S., Farè, S., Boor, P., Moroni, L., & Mota, C. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00108 · Cited by 52
Moreira, A., Müller, M., Costa, P. F., & Kohl, Y. (2021) · Advanced Biology · doi:10.1002/adbi.202101139 · Cited by 52
Polymeric nanoparticles as therapeutic agents against coronavirus disease
Charelli, L. E., de Mattos, G. C., Sousa-Batista, A. J., Pinto, J. C., & Balbino, T. A. (2022) · Journal of Nanoparticle Research · doi:10.1007/s11051-022-05396-5 · Cited by 51
Recent advances in organoid engineering: A comprehensive review
Unagolla, J. M., & Jayasuriya, A. C. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101582 · Cited by 51
Jansen, K., Schuurmans, C. C. L., Jansen, J., Masereeuw, R., & Vermonden, T. (2017) · Current Pharmaceutical Design · doi:10.2174/1381612823666170710155726 · Cited by 51
Shen, J. X., Youhanna, S., Zandi Shafagh, R., Kele, J., & Lauschke, V. M. (2020) · Chemical Research in Toxicology · doi:10.1021/acs.chemrestox.9b00245 · Cited by 49
Concise Review: Kidney Generation with Human Pluripotent Stem Cells
Morizane, R., Miyoshi, T., & Bonventre, J. V. (2017) · Stem Cells · doi:10.1002/stem.2699 · Cited by 50
Scaffolding kidney organoids on silk
Gupta, A., Coburn, J. M., Davis‐Knowlton, J., Kimmerling, E. P., Kaplan, D. L., & Oxburgh, L. H. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2830 · Cited by 51
Bioprinted three dimensional human tissues for toxicology and disease modeling
Nguyen, D. G., & Pentoney, S. L. (2017) · Drug Discovery Today Technologies · doi:10.1016/j.ddtec.2017.03.001 · Cited by 49
Microfluidic based human-on-a-chip: A revolutionary technology in scientific research
Syama, S., & Mohanan, P. V. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.049 · Cited by 49
Ross, E. J., Gordon, E. R., Sothers, H., Darji, R., Baron, O., Haithcock, D. W., Prabhakarpandian, B., Pant, K., Myers, R., Cooper, S. J., et al. (2021) · Scientific Reports · doi:10.1038/s41598-021-93570-5 · Cited by 49
Tien, J., & Dance, Y. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001028 · Cited by 49
Bioprinted vascular tissue: Assessing functions from cellular, tissue to organ levels
Jiang, H., Li, X., Chen, T., Liu, Y., Wang, Q., Wang, Z., & Jia, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100846 · Cited by 48
A Non-woven Path: Electrospun Poly(lactic acid) Scaffolds for Kidney Tissue Engineering
Burton, T. P., & Callanan, A. (2018) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-017-0107-5 · Cited by 46
Yu, C., Zhu, W. Z., Sun, B., Mei, D., Gou, M., & Chen, S. (2018) · Applied Physics Reviews · doi:10.1063/1.5050245 · Cited by 48
Juguilon, C., Khosravi, R., Radisic, M., & Wu, J. C. (2025) · Circulation Research · doi:10.1161/circresaha.125.325497 · Cited by 47
New Frontiers for Biofabrication and Bioreactor Design in Microphysiological System Development
Parrish, J., Lim, K. S., Zhang, B., Radisic, M., & Woodfield, T. B. F. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.04.009 · Cited by 47
Improved Resolution and Fidelity of Droplet-Based Bioprinting by Upward Ejection
Ji, Y., Yang, Q., Huang, G., Shen, M., Jian, Z., Thoraval, M.-J., Lian, Q., Zhang, X., & Xu, F. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00400 · Cited by 47
Engineering Tissue Fabrication With Machine Intelligence: Generating a Blueprint for Regeneration
Kim, J., McKee, J. A., Fontenot, J. J., & Jung, J. P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00443 · Cited by 47
Organs-on-Chips Platforms Are Everywhere: A Zoom on Biomedical Investigation
Zommiti, M., Connil, N., Tahrioui, A., Groboillot, A., Barbey, C., Konto‐Ghiorghi, Y., Lesouhaitier, O., Chevalier, S., & Feuilloley, M. G. J. (2022) · Bioengineering · doi:10.3390/bioengineering9110646 · Cited by 47
Current Challenges of Bioprinted Tissues Toward Clinical Translation
Ke, D., & Murphy, S. V. (2018) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0132 · Cited by 46
Kennedy, C. C., Brown, E., Abutaleb, N. O., & Truskey, G. A. (2021) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2021.625016 · Cited by 46
Recent advances on enhancing 3D printing quality of protein‐based inks: A review
Han, T., Wu, J., Hu, Y., Chen, X., Cai, X., Wen, Y., Chen, H., Huang, J., & Wang, S. (2024) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.13349 · Cited by 45
Pun, S., Prakash, A., Demaree, D., Krummel, D. P., Sciumè, G., Sengupta, S., & Barrile, R. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202401876 · Cited by 45
Self‐Organization of Fibroblast‐Laden 3D Collagen Microstructures from Inkjet‐Printed Cell Patterns
Park, J. A., Lee, H., Park, S., & Jung, S. (2020) · Advanced Biosystems · doi:10.1002/adbi.201900280 · Cited by 45
Hydrogel Microspheres Empowering Organ‐on‐a‐Chip Systems: Innovations and Applications
Liu, J., Du, C., Chen, J., Tang, B., Liu, S., Tan, J., Luo, X., Zhan, J., Liu, J., Chen, Z., et al. (2025) · Small · doi:10.1002/smll.202504563 · Cited by 44
From intricate to integrated: Biofabrication of articulating joints
Groen, W. M. G. A. C., Diloksumpan, P., van Weeren, P. R., Levato, R., & Malda, J. (2017) · Journal of Orthopaedic Research® · doi:10.1002/jor.23602 · Cited by 44
Kopec, A. K., Yokokawa, R., Khan, N., Horii, I., Finley, J. E., Bono, C. P., Donovan, C., Roy, J., Harney, J., Burdick, A. D., et al. (2021) · The Journal of Toxicological Sciences · doi:10.2131/jts.46.99 · Cited by 39
Frankowski, J., Kurzątkowska, M., Sobczak, M., & Piotrowska, U. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123313 · Cited by 44
Fabrication of Kidney Proximal Tubule Grafts Using Biofunctionalized Electrospun Polymer Scaffolds
Jansen, K., Castilho, M. D., Aarts, S., Kaminski, M. M., Lienkamp, S. S., Pichler, R., Malda, J., Vermonden, T., Jansen, J., & Masereeuw, R. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800412 · Cited by 43
Distler, T., Ruther, F., Boccaccini, A. R., & Detsch, R. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900245 · Cited by 43
Immune response against the biomaterials used in 3D bioprinting of organs
Elalouf, A. (2021) · Transplant Immunology · doi:10.1016/j.trim.2021.101446 · Cited by 43
Carvalho, V. M., Bañobre‐López, M., Minas, G. M. H., Teixeira, S., Lima, R. A., & Rodrigues, R. O. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00224 · Cited by 44
Stem cell-derived kidney cells and organoids: Recent breakthroughs and emerging applications
Chuah, J. K. C., & Zink, D. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.001 · Cited by 43
Kostadinova, M., Raykovska, M., Simeonov, R., Lolov, S. R., & Mourdjeva, M. (2025) · Current Issues in Molecular Biology · doi:10.3390/cimb47040287 · Cited by 42
Evolution of bioprinting and current applications
Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., Marcos-Romero, A. C., & Díaz-Parralejo, A. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.742 · Cited by 41
A path forward advancing microphysiological systems
Härtung, T., & Smirnova, L. (2025) · ALTEX · doi:10.14573/altex.2504091 · Cited by 41
Son, J., Li, S., & Jeong, W. (2025) · Gels · doi:10.3390/gels11080636 · Cited by 42
Mir, T. A., Iwanaga, S., Kurooka, T., Toda, H., Sakai, S., & Nakamura, M. M. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v5i1.153 · Cited by 41
Bioengineering strategies for nephrologists: kidney was not built in a day
Peired, A. J., Mazzinghi, B., Chiara, L. D., Guzzi, F., Lasagni, L., Romagnani, P., & Lazzeri, E. (2020) · Expert Opinion on Biological Therapy · doi:10.1080/14712598.2020.1709439 · Cited by 41
In Vitro 3D Modeling of Neurodegenerative Diseases
Louit, A., Galbraith, T., & Berthod, F. (2023) · Bioengineering · doi:10.3390/bioengineering10010093 · Cited by 41
Direct three-dimensional printing of polymeric scaffolds with nanofibrous topography
Prasopthum, A., Shakesheff, K. M., & Yang, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aaa15b · Cited by 41
Understanding Cisplatin Pharmacokinetics and Toxicodynamics to Predict and Prevent Kidney Injury
Thompson, L. E., & Joy, M. S. (2024) · Journal of Pharmacology and Experimental Therapeutics · doi:10.1124/jpet.124.002287 · Cited by 40
Microfluidic-assisted engineering of hydrogels with microscale complexity
Li, Y., Huang, D., Zhang, Y., Xiao, Y., & Zhang, X. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.05.023 · Cited by 41
Phillips, J. A., Grandhi, T. S. P., Davis, M., Gautier, J.-C., Hariparsad, N., Keller, D., Sura, R., & Van Vleet, T. R. (2020) · Lab on a Chip · doi:10.1039/c9lc00925f · Cited by 38
Chapron, A., Chapron, B. D., Hailey, D. W., Chang, S., Imaoka, T., Thummel, K. E., Kelly, E. J., Himmelfarb, J., Shen, D. D., & Yeung, C. K. (2020) · ACS Pharmacology & Translational Science · doi:10.1021/acsptsci.9b00078 · Cited by 40
Holmes, A. M., Charlton, A., Derby, B., Ewart, L. C., Scott, A., & Shu, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7bbd · Cited by 40
Reeser, K., & Doiron, A. L. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0058 · Cited by 39
Recapitulating kidney development: Progress and challenges
Little, M. H., Kumar, S. V. R., & Forbes, T. A. (2018) · Seminars in Cell and Developmental Biology · doi:10.1016/j.semcdb.2018.08.015 · Cited by 39
Generation of proximal tubule-enhanced kidney organoids from human pluripotent stem cells
Vanslambrouck, J. M., Tan, K. S., Mah, S. Y. Y., & Little, M. H. (2023) · Nature Protocols · doi:10.1038/s41596-023-00880-1 · Cited by 38
Advances in 3D Bioprinting and Microfluidics for Organ-on-a-Chip Platforms
de Barros, N. R., Harb, S. V., Horinouchi, C. D. D. S., Tofani, L. B., Santos, D., Elias, G. B., Velho, J. C. M., de Aguiar, A. C., Sant’Ana, M., & Figueira, A. C. M. (2025) · Polymers · doi:10.3390/polym17223078 · Cited by 38
Sacrificial Bioprinting of a Mammary Ductal Carcinoma Model
Duchamp, M., Liu, T., van Genderen, A. M., Kappings, V., Oklu, R., Ellisen, L. W., & Zhang, Y. S. (2019) · Biotechnology Journal · doi:10.1002/biot.201700703 · Cited by 37
Mihevc, M., Petreski, T., Maver, U., & Bevc, S. (2020) · Molecular Biology Reports · doi:10.1007/s11033-020-05977-4 · Cited by 38
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies
Salg, G. A., Blaeser, A., Gerhardus, J. S., Hackert, T., & Kenngott, H. G. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23158589 · Cited by 38
3D printed tissue models: From hydrogels to biomedical applications
Cadamuro, F., Nicotra, F., & Russo, L. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.01.048 · Cited by 38
Saratti, C. M., Rocca, G. T., & Krejci, I. (2018) · Journal of Prosthodontic Research · doi:10.1016/j.jpor.2018.10.005 · Cited by 38
Vyas, J., Raytthatha, N., Vyas, P., Prajapati, B. G., Uttayarat, P., Singh, S. K., & Chittasupho, C. (2025) · Polymers · doi:10.3390/polym17081090 · Cited by 37
Building Complex Life Through Self-Organization
Sthijns, M. M. J. P. E., LaPointe, V. L. S., & van Blitterswijk, C. (2019) · Tissue Engineering Part A · doi:10.1089/ten.tea.2019.0208 · Cited by 37
3D bioprinting in tissue engineering and regenerative medicine
Gupta, S., & Bit, A. (2021) · Cell and Tissue Banking · doi:10.1007/s10561-021-09936-6 · Cited by 37
3D printing of composite materials using ultralow-melt-viscosity polymer and continuous carbon fiber
Kuba, D., Matsuzaki, R., Ochi, S., & Ogihara, S. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100250 · Cited by 37
Pump‐Less Platform Enables Long‐Term Recirculating Perfusion of 3D Printed Tubular Tissues
Zhang, F., Lin, D. S. Y., Rajasekar, S., Sotra, A., & Zhang, B. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300423 · Cited by 37
Applications of kidney organoids derived from human pluripotent stem cells
Kim, Y. K., Nam, S. A., & Yang, C. W. (2018) · The Korean Journal of Internal Medicine · doi:10.3904/kjim.2018.198 · Cited by 37
Revolutionizing nephrology research: expanding horizons with kidney-on-a-chip and beyond
Huang, W., Chen, Y., He, F.-F., & Zhang, C. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1373386 · Cited by 36
Novel Strategies in Artificial Organ Development: What Is the Future of Medicine?
Klak, M., Bryniarski, T., Kowalska, P. D., Gomółka, M., Tymicki, G., Kosowska, K., Cywoniuk, P., Dobrzański, T., Turowski, P., & Wszola, M. (2020) · Micromachines · doi:10.3390/mi11070646 · Cited by 36
3D Bioprinting: The Roller Coaster Ride to Commercialization
Elemoso, A., Shalunov, G., Balakhovsky, Y. M., Ostrovskiy, A. Y., & Khesuani, Y. D. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i3.301 · Cited by 36
Tröndle, K., Rizzo, L., Pichler, R., Koch, F., Itani, A., Zengerle, R., Lienkamp, S. S., Koltay, P., & Zimmermann, S. (2021) · Biofabrication · doi:10.1088/1758-5090/abe185 · Cited by 36
Engineering and Assessing Cardiac Tissue Complexity
Tadevosyan, K., Iglesias‐García, O., Mazo, M. M., Prósper, F., & Raya, Á. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031479 · Cited by 36
Manufacturing of Microfluidic Sensors Utilizing 3D Printing Technologies: A Production System
Khorsandi, D., Nodehi, M., Waqar, T., Shabani, M., Kamare, B., Zare, E. N., Ersoy, S., Annabestani, M., Çelebi, M. F., & Kafadenk, A. (2021) · Journal of Nanomaterials · doi:10.1155/2021/5537074 · Cited by 36
Bioprinting of Organ-on-Chip Systems: A Literature Review from a Manufacturing Perspective
Thakare, K., Jerpseth, L., Pei, Z., Elwany, A. H., Quek, F. K. H., & Qin, H. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5030091 · Cited by 36
Budharaju, H., Singh, R. K., & Kim, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.006 · Cited by 35
Bioprinting stem cells: building physiological tissues one cell at a time
Scognamiglio, C., Soloperto, A., Ruocco, G., & Cidonio, G. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00124.2020 · Cited by 35
Drug delivery and testing via 3D printing
Kumar, V., Kaur, H., Kumari, A., Hooda, G., Garg, V., & Dureja, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00298 · Cited by 35
Yücer, S., Sarac, B., & Çiftçi, F. (2025) · Bioengineering & Translational Medicine · doi:10.1002/btm2.70080 · Cited by 34
Emerging polymeric materials in additive manufacturing for use in biomedical applications
Gladman, A. S., García‐Leiner, M., & Sauer-Budge, A. F. (2019) · AIMS bioengineering · doi:10.3934/bioeng.2019.1.1 · Cited by 34
Abdul, L., Rajasekar, S., Lin, D. S. Y., Raja, S. V., Sotra, A., Feng, Y., Liu, A. Y., & Zhang, B. (2020) · Lab on a Chip · doi:10.1039/d0lc01010c · Cited by 34
Imaging microphysiological systems: a review
Peel, S. E., & Jackman, M. J. (2020) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00186.2020 · Cited by 34
Tissue Chips and Microphysiological Systems for Disease Modeling and Drug Testing
Donoghue, L., Nguyen, K. T. V., Graham, C., & Sethu, P. (2021) · Micromachines · doi:10.3390/mi12020139 · Cited by 34
Human mini-blood–brain barrier models for biomedical neuroscience research: a review
Tran, M., Heo, C., Lee, L. P., & Cho, H. (2022) · Biomaterials Research · doi:10.1186/s40824-022-00332-z · Cited by 34
Metadata
- Authors
- Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., & Lewis, J. A.
- Affiliations
- F. Hoffmann-La Roche AG (CH)
- Harvard University (US)
- Corresponding author
- Moisan, Annie
- Lewis, Jennifer A.
- Venue
- Scientific Reports
- Published
- 2016-10-11
- Volume
- 6
- Issue
- 1
- Pages
- 34845-34845
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5057112
- OpenAlex
- W2530360197
- Cited by
- 699
- References
- 42
- Citations by year
- 2026: 46 · 2025: 64 · 2024: 68 · 2023: 68 · 2022: 83 · 2021: 91 · 2020: 84 · 2019: 74 · 2018: 71 · 2017: 48 · 2016: 1
- FWCI
- 31.13
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- Funders
- National Science Foundation (1548261)
- Hansjörg Wyss Institute for Biologically Inspired Engineering, Harvard University
- Division of Civil, Mechanical and Manufacturing Innovation
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Engineering › Biomedical Engineering › Microfluidic and Capillary Electrophoresis Applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- bioprinting, proximal tubule, extracellular matrix, epithelial barrier function, cyclosporine nephrotoxicity, drug screening, disease modeling
- MeSH terms
- Cells, Cultured, Drug Evaluation, Preclinical, Epithelial Cells, Extracellular Matrix, Humans, Kidney Tubules, Proximal, Organ Culture Techniques, Perfusion, Cyclosporine, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.