The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Nitrogen-doped carbon nanotubes as efficient and durable metal-free cathodic catalysts for oxygen reduction in microbial fuel cells
Abstract
Recently, the application of microbial fuel cells (MFCs) with cost-effective and long durable cathodic catalysts to generate electricity sustainably, has drawn much attention. This study investigated the use of nitrogen-doped carbon nanotubes (NCNTs) as the cathodic catalyst for oxygen reduction in MFCs to produce electricity efficiently and durably. The obtained maximum power density was 1600 ± 50 mW m−2, which was higher than the commonly used platinum (Pt) catalyst (Pt/C) (1393 ± 35 mW m−2). Also, the drop percentage of power densities with NCNTs was lower than with Pt/C over 25 cycles, indicating that MFCs with NCNTs as the cathodic catalyst could generate electricity more durably than those with Pt/C. Further investigation of the mechanisms revealed that MFCs with the bamboo-shaped and vertically aligned NCNTs had lower internal resistance and higher cathode potentials. Rotating ring-disk electrode voltammogram, Raman microspectroscopy and X-ray photoelectron spectroscopic analyses suggested that NCNTs possessed a higher electrocatalytic activity for the oxygen reduction reaction (ORR) via a four-electron pathway in neutral pH phosphate buffer solution (PBS). Cyclic voltammograms on NCNTs and Pt/C electrodes before and after a continuous potentiodynamic swept in neutral PBS demonstrated that NCNTs had a better durability for cathodic ORR than Pt/C, which drove MFCs with NCNTs to generate electricity durably.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction
Gong, K., Du, F., Xia, Z., Durstock, M., & Dai, L. (2009) · Science · doi:10.1126/science.1168049 · Cited by 7,188
Microbial Fuel Cells: Methodology and Technology
Logan, B. E., Hamelers, B., Rozendal, R., Schröder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., & Rabaey, K. (2006) · Environmental Science & Technology · doi:10.1021/es0605016 · Cited by 6,065
Extreme Oxygen Sensitivity of Electronic Properties of Carbon Nanotubes
Collins, P. G., Bradley, K., Ishigami, M., & Zettl, A. (2000) · Science · doi:10.1126/science.287.5459.1801 · Cited by 2,974
Lovley, D. R., & Phillips, E. J. P. (1988) · Applied and Environmental Microbiology · doi:10.1128/aem.54.6.1472-1480.1988 · Cited by 2,395
Exoelectrogenic bacteria that power microbial fuel cells
Logan, B. E. (2009) · Nature Reviews Microbiology · doi:10.1038/nrmicro2113 · Cited by 2,383
Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters
Zhang, J., Sasaki, K., Sutter, E., & Adzic, R. R. (2007) · Science · doi:10.1126/science.1134569 · Cited by 1,779
Graphite Fiber Brush Anodes for Increased Power Production in Air-Cathode Microbial Fuel Cells
Logan, B., Cheng, S., Watson, V., & Estadt, G. (2007) · Environmental Science & Technology · doi:10.1021/es062644y · Cited by 1,236
Electrocatalysts for O2 reduction
Yeager, E. (1984) · Electrochimica Acta · doi:10.1016/0013-4686(84)85006-9 · Cited by 1,222
Increased performance of single-chamber microbial fuel cells using an improved cathode structure
Cheng, S., Liu, H., & Logan, B. E. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.01.010 · Cited by 1,096
Microbial Fuel Cells—Challenges and Applications
Logan, B. E., & Regan, J. M. (2006) · Environmental Science & Technology · doi:10.1021/es0627592 · Cited by 971
Cited by
Metal–air batteries: from oxygen reduction electrochemistry to cathode catalysts
Cheng, F., & Chen, J. (2012) · Chemical Society Reviews · doi:10.1039/c1cs15228a · Cited by 2,677
Metal-Free Catalysts for Oxygen Reduction Reaction
Dai, L., Xue, Y., Qu, L., Choi, H.-J., & Baek, J.-B. (2015) · Chemical Reviews · doi:10.1021/cr5003563 · Cited by 2,380
Lai, L., Potts, J. R., Zhan, D., Wang, L., Poh, C. K., Tang, C., Gong, H., Shen, Z., Lin, J., & Ruoff, R. S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21802j · Cited by 2,277
Self-citationRecent Advancement of Nanostructured Carbon for Energy Applications
Yang, Z., Ren, J., Zhang, Z., Chen, X., Guan, G., Qiu, L., Zhang, Y., & Peng, H. (2015) · Chemical Reviews · doi:10.1021/cr5006217 · Cited by 810
Carbon-based electrocatalysts for advanced energy conversion and storage
Zhang, J., Xia, Z., & Dai, L. (2015) · Science Advances · doi:10.1126/sciadv.1500564 · Cited by 735
Metal-free doped carbon materials as electrocatalysts for the oxygen reduction reaction
Daems, N., Sheng, X., Vankelecom, I. F. J., & Pescarmona, P. P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14043a · Cited by 680
Zhou, M., Wang, H.-L., & Guo, S. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00414d · Cited by 665
Wood, K. N., O'Hayre, R., & Pylypenko, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee44078h · Cited by 634
Parvez, K., Yang, S., Hernandez, Y., Winter, A., Turchanin, A., Feng, X., & Müllen, K. (2012) · ACS Nano · doi:10.1021/nn302674k · Cited by 612
Zhang, J., & Dai, L. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201607405 · Cited by 603
Zhang, J., & Dai, L. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01563 · Cited by 590
Sun, H., Kwan, C., Suvorova, A., Ang, H. M., Tadé, M. O., & Wang, S. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.02.012 · Cited by 509
Xiang, Z., Xue, Y., Cao, D., Huang, L., Chen, J., & Dai, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308896 · Cited by 452
Carbon‐Based Microbial‐Fuel‐Cell Electrodes: From Conductive Supports to Active Catalysts
Li, S., Cheng, C., & Thomas, A. (2017) · Advanced Materials · doi:10.1002/adma.201602547 · Cited by 423
Zhao, Q., Mao, Q., Zhou, Y., Wei, J., Liu, X., Yang, J., Luo, L., Zhang, J., Chen, H., Chen, H., et al. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2017.09.042 · Cited by 413
Effects of Intrinsic Pentagon Defects on Electrochemical Reactivity of Carbon Nanomaterials
Zhu, J., Huang, Y., Mei, W., Zhao, C., Zhang, C., Zhang, J., Amiinu, I. S., & Mu, S. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201813805 · Cited by 407
Self-Supporting Oxygen Reduction Electrocatalysts Made from a Nitrogen-Rich Network Polymer
Zhao, Y., Watanabe, K., & Hashimoto, K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3085934 · Cited by 393
Yuan, H., Hou, Y., Abu-Reesh, I. M., Chen, J., & He, Z. (2016) · Materials Horizons · doi:10.1039/c6mh00093b · Cited by 385
Zn Single Atom Catalyst for Highly Efficient Oxygen Reduction Reaction
Song, P., Luo, M., Liu, X., Xing, W., Xu, W., Jiang, Z., & Gu, L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700802 · Cited by 374
Nitrogen‐Doped Holey Graphitic Carbon from 2D Covalent Organic Polymers for Oxygen Reduction
Xiang, Z., Cao, D., Huang, L., Shui, J., Wang, M., & Dai, L. (2014) · Advanced Materials · doi:10.1002/adma.201306328 · Cited by 338
Ganiyu, S. O., Martínez-Huitle, C. A., & Rodrigo, M. A. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.118857 · Cited by 334
Nanostructured material-based biofuel cells: recent advances and future prospects
Zhao, C.-E., Gai, P., Song, R., Chen, Y., Zhang, J., & Zhu, J.-J. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00044d · Cited by 324
Self-citationZhou, W., Meng, X., Gao, J., & Alshawabkeh, A. N. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.03.042 · Cited by 321
Carbon nanotube-coated macroporous sponge for microbial fuel cell electrodes
Xie, X., Ye, M., Hu, L., Liu, N., McDonough, J. R., Chen, W., Alshareef, H. N., Criddle, C. S., & Cui, Y. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02122b · Cited by 320
Crumpled graphene particles for microbial fuel cell electrodes
Xiao, L., Damien, J., Luo, J., Jang, H. D., Huang, J., & He, Z. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.036 · Cited by 304
Electrode materials for microbial fuel cells: nanomaterial approach
Mustakeem (2015) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-015-0063-8 · Cited by 291
Ye, L., Chai, G., & Wen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606190 · Cited by 287
You, S., Gong, X., Wang, W., Qi, D., Wang, X., Chen, X., & Ren, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501497 · Cited by 284
Zhang, J., & Dai, L. (2016) · Angewandte Chemie · doi:10.1002/ange.201607405 · Cited by 129
Sun, Y., 1. College of Engineering, N. A. U., Zhang, Z., Sun, Y., Yang, G., & 2. Guangzhou Institute of Energy Conversion, C. A. O. S. (2020) · International Journal of Agricultural and Biological Engineering · doi:10.25165/j.ijabe.20201306.5765 · Cited by 70
“Relevant research also proved that O2 adsorption energy could be reduced by the introduction of pyridinic N and pyrrolic N([44]), in addition, the large amount of pyridinic N facilitates the ORR process via a 4e pathway([45]).”
Background
Metadata
- Authors
- Feng, L., Yan, Y., Chen, Y., & Wang, L.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 5
- Pages
- 1892
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2000104829
- Cited by
- 367
- References
- 32
- FWCI
- 23.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.