Effect of pore size on carbon dioxide sorption by carbide derived carbon
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Items 501–600 of 679
Synthesis and characterization of porous carbon from Hawaii nut shells for effective CO2 capture
Liu, X., Wang, Y., Chen, Z., Hu, X., Xiao, Q., Zhao, L., Demir, M., Kilic, M., Mesfer, M. K. A., & Wang, L. (2026) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2026.109531 · Cited by 14
Enhancing CO2 capture through innovating monolithic graphene oxide frameworks
Jha, R. K., Bhunia, H., & Basu, S. (2024) · Environmental Research · doi:10.1016/j.envres.2024.118426 · Cited by 14
Qiao, L., Shu, Y., Gao, Y., Fan, H., Zhao, J., Zhang, J., Uyama, H., & Shen, Y. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.114133 · Cited by 14
Hiremath, V., Lim, A. C., Nagaraju, G., & Seo, J. G. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00167 · Cited by 16
Ha, D., Lee, H., Han, J., & Kim, J. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158358 · Cited by 14
Activated carbon materials with a rich surface chemistry prepared from L-cysteine amino acid
Reljic, S., Collados, C. C., Jardim, E. D. O., Farrando-Pérez, J., Escandell, M. M., & Silvestre‐Albero, J. (2022) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2022.113446 · Cited by 14
Zeolites Derived from Natural Kaolinite for CO2 Adsorption
Celoria, G., Begni, F., Paul, G., Boccaleri, E., Merlo, V., Marchese, L., & Bisio, C. (2024) · Processes · doi:10.3390/pr12010194 · Cited by 14
Optimal Activation of Porous Carbon for High Performance CO2 Capture
Lee, J. H., Kwac, K., Lee, H. J., Lim, S. Y., Jung, D. S., Jung, Y., & Choi, J. W. (2016) · ChemNanoMat · doi:10.1002/cnma.201600082 · Cited by 17
Highly porous carbon derived from litchi pericarp for supercapacitors application
Wang, P., Zhang, G., Chen, W., Jiao, H., Liu, L., Wang, X., Deng, X., & Chen, Q. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-9636-5 · Cited by 14
Liu, S., Sui, Z., Wang, T., Zhou, H., Liu, Y., & Han, B. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00147 · Cited by 14
Barua, A., Mehra, P., & Paul, A. (2023) · Results in Chemistry · doi:10.1016/j.rechem.2023.100807 · Cited by 16
Temperature-Dependent Double-Step CO 2 Occlusion of K 2 CO 3 under Moist Conditions
Chioyama, H., Luo, H., Ohba, T., & Kanoh, H. (2015) · Adsorption Science & Technology · doi:10.1260/0263-6174.33.3.243 · Cited by 14
“Although several studies have examined the use of activated carbons for this purpose (Presser et al. 2011), which have important advantages over zeolites such as greater hydrophobicity, significantly lower cost, and lower energy requirements for regeneration, the CO2 adsorption capacity of…”
BackgroundSedighi, M., Talaie, M. R., Sabzyan, H., & Aghamiri, S. F. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00701 · Cited by 15
CO2 Storage on Nanoporous Carbons
Sevilla, M., Ferrero, G. A., & Fuertes, A. B. (2019) · Green energy and technology · doi:10.1007/978-981-13-3504-4_11 · Cited by 16
Design and preparation of continuous titanium carbide fibers via simple precursor route
Yu, L., Ji, W., Zhang, S., Song, Y. F., Liu, H., Wang, Z., Liu, Q., & Wang, X. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.07.019 · Cited by 13
Staciwa, P., Sibera, D., Pełech, I., Narkiewicz, U., Łojkowski, W., Dąbrowska, S., & Cormia, R. D. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110829 · Cited by 13
Ilic, I. K., & Oschatz, M. (2021) · Small · doi:10.1002/smll.202007508 · Cited by 13
Waste chrysanthemum tea derived hierarchically porous carbon for CO2 capture
Du, J., Liu, L., Zhang, L., Yu, Y., Zhang, Y., & Chen, A. (2017) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.5005867 · Cited by 13
Maceiras, R., Feijoo, J., Alfonsín, V., Feijoo, M. Á. Á., & Azofra, L. M. (2025) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2025.113869 · Cited by 16
Meza-Morales, P. J., Gómez‐Gualdrón, D. A., Arrieta-Pérez, R. R., Hernández‐Maldonado, A. J., Snurr, R. Q., & Curet-Arana, M. C. (2016) · Dalton Transactions · doi:10.1039/c6dt02994a · Cited by 12
Wang, S.-T., & Hong, J. (2019) · ACS Omega · doi:10.1021/acsomega.9b00901 · Cited by 12
Maity, A., Singh, S., Mehta, S., Youngs, T. G. A., Bahadur, J., & Polshettiwar, V. (2023) · Langmuir · doi:10.1021/acs.langmuir.2c03474 · Cited by 12
Tailored Fe3C-derived carbons with embedded Fe nanoparticles for ammonia adsorption
Mangarella, M. C., & Walton, K. S. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.042 · Cited by 12
CO 2 Adsorption Properties of Activated Carbon Fibres under Ambient Conditions
Nakahigashi, Y., Kanoh, H., Ohba, T., Baba, M., Hattori, Y., Inoue, N., & Morimoto, M. (2012) · Adsorption Science & Technology · doi:10.1260/0263-6174.30.7.621 · Cited by 12
“However, several studies in the literature have examined the use of activated carbons (Presser et al. 2011), which present important advantages over zeolites, such as greater hydrophobicity, significantly lower cost and lower energy requirements for regeneration.”
BackgroundPhenol-Formaldehyde Resin-Based Carbons for CO2 Separation at Sub-Atmospheric Pressures
Álvarez-Gutiérrez, N., Gil, M. V., Martínez, M., Rubiera, F., & Pevida, C. (2016) · Energies · doi:10.3390/en9030189 · Cited by 12
“For instance, low-density materials can be prepared by carbonisation of polymeric compounds pretreated by various procedures, including modification with inorganic additives [15].”
BackgroundMethodSrivastava, D., Rani, P., & Srivastava, R. (2020) · Chemistry - An Asian Journal · doi:10.1002/asia.202000001 · Cited by 12
Facile synthesis of flower-like carbon microspheres for carbon dioxide capture
Sharma, M., & Snyder, M. A. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.111801 · Cited by 13
Park, S., Lee, H.-M., Lee, Y.-S., An, S., Yang, J., & Kim, J. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c02943 · Cited by 11
Do Residual Solvent Molecules Always Hinder Gas Sorption in Metal–Organic Frameworks?
Cooley, I., & Besley, E. (2023) · Chemistry of Materials · doi:10.1021/acs.chemmater.3c01940 · Cited by 11
Qi, T., Liu, S., Sun, L., Feng, X., Zhao, B., An, S., Xing, L., Jing, Q., Jiang, H., Li, Q., et al. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.132585 · Cited by 11
Zhang, M., Liu, L., He, T., Wu, G., & Chen, P. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201600396 · Cited by 11
Wang, R., Liu, Q., Peng, Q., Yang, X., Zhao, H., Fan, H., Liu, H., & Cao, X. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111359 · Cited by 11
Preparation and characterization of chemically activated carbon materials for CO2capture
Jeon, D., Bae, S.-T., & Park, S. (2016) · Carbon letters · doi:10.5714/cl.2016.17.1.085 · Cited by 11
MOFs-derived porous carbon materials for gas adsorption and separation
Sun, X., Wang, C., Pan, X., Liu, Y., Chen, K., & Luo, S. (2021) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2020-1670 · Cited by 11
Luo, H., Zhao, S., Ma, A., Sun, K., Zhu, Y., & Sun, Z. (2022) · Fuel · doi:10.1016/j.fuel.2022.127154 · Cited by 11
Novel Carbon Materials for CO2 Adsorption
Silvestre‐Albero, J., & Rodríguez-Reinoso, F. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-097744-7.00019-3 · Cited by 11
Activation-free preparation of porous carbon fiber derived from phenolic resin for CO2 absorption
Jiao, F., Miao, P., Guo, P., Liu, J., & Wang, X. (2024) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2024.105621 · Cited by 10
Wang, M., Gao, S., Wang, L., Yang, X., & Chen, W. (2025) · Energy · doi:10.1016/j.energy.2025.136397 · Cited by 11
Yang, F., Zhang, K., Lin, Q., Pan, H., & Chen, Z. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133505 · Cited by 10
Jin, X., Ge, J., Wu, Z., Zhu, L., Xiong, M., Qi, J., & Ruan, C. (2025) · Molecules · doi:10.3390/molecules30132747 · Cited by 10
Fu, J., Corsi, J. S., Wang, Z., Wei, H., & Detsi, E. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00919 · Cited by 10
Pornaroontham, P., Panomsuwan, G., Chae, S., Saito, N., Thouchprasitchai, N., Phongboonchoo, Y., & Pongstabodee, S. (2019) · Nanomaterials · doi:10.3390/nano9121776 · Cited by 10
Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces
Zhou, Q., Zhou, J., Cao, H., & Xu, X. (2021) · ACS Omega · doi:10.1021/acsomega.0c05260 · Cited by 10
Li, Y., Liu, J., Kong, J., Qi, N., & Chen, Z. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp01867a · Cited by 10
Activated Carbons from Hydrochars Prepared in Milk
Yahia, S. H., Lee, K. K., Ayed, B., Hedin, N., & Church, T. L. (2019) · Scientific Reports · doi:10.1038/s41598-019-53361-5 · Cited by 10
Engineering biomass-derived CO2 capture materials via hydrothermal processes
Nabhai, A., Plaza, N. Z., Bechle, N. J., Abubakr, S., Atihan, M., Springstead, J. R., Wu, Q., Li, K., & Li, J. (2025) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2025.02.011 · Cited by 9
Lee, J., Lee, J. W., Kim, D., Lee, S., & Park, S. (2025) · NPG Asia Materials · doi:10.1038/s41427-025-00609-4 · Cited by 9
“The R 2 values were calculated by dividing the residual sum of squares by the total sum of squares, as follows 56 : where y i is the y value for observation i , y is the mean of y value, and f ð x i Þ is the value of a linear equation.”
Facile synthesis of potassium sodium tartrate-derived self-activated porous carbon for CO2 capture
Che, M., Yin, Y., Liu, X., Liu, Y., Xiao, Q., Zhao, L., Demir, M., Altıncı, O. C., Wang, L., & Hu, X. (2026) · Fuel · doi:10.1016/j.fuel.2026.140503 · Cited by 9
Wang, P., Liu, H., Zhu, W., Chen, W., Wang, X., Yang, L., Yang, B., Chen, Q., Cairang, L., & Cairang, Z. (2024) · Molecules · doi:10.3390/molecules29133153 · Cited by 10
“For example, some reports showed that the narrow micropores have a great contribution to the CO 2 capture capability [40,41].”
BackgroundSiemak, J., Ulejczyk, B., Mikolajczak, G., Pęksiński, J., Sreńscek-Nazzal, J., Młotek, M., Krawczyk, K., & Michalkiewicz, B. (2024) · Applied Sciences · doi:10.3390/app14156438 · Cited by 9
Facile Single-Step Synthesis of Porous Carbons as Efficient CO2 Adsorbents
Liu, S., Li, Q., Wang, L., Ma, R., Zou, J., Huang, L., & Hu, X. D. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03233 · Cited by 9
Optimal Performance of Nanoporous Carbons on Adsorptive Separation of CO2 from Flue Gas
Lin, Z., Liu, L., Liu, C., & Liu, Y. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00086 · Cited by 9
Expanded graphite/phenolic resin-based carbon composite adsorbents for post-combustion CO 2 capture
Jin, Y., Huynh, C., Hawkins, S. C., & Su, S. (2015) · RSC Advances · doi:10.1039/c5ra09853j · Cited by 10
A ribbon-like ultramicroporous conjugated polycarbazole network for gas storage and separation
Qiao, S., Wei, H., Wang, T., Huang, W., Gu, C., Yang, R., & Li, X. (2015) · New Journal of Chemistry · doi:10.1039/c5nj02567b · Cited by 9
Hu, C., Tan, J., Lyu, Q., Feng, G., Shi, J., Wang, K., & Wang, Z. (2022) · Geomechanics and Geophysics for Geo-Energy and Geo-Resources · doi:10.1007/s40948-022-00480-5 · Cited by 9
Electro-oxidation of solid CaC2 to carbon powder in molten salt
Chen, D., Song, Q., Xie, H., Ning, Z., & Xu, Q. (2023) · Powder Technology · doi:10.1016/j.powtec.2022.118214 · Cited by 9
Zaman, A. C. (2021) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2021.122546 · Cited by 8
Moussa, M., Bohli, T., Pevida, C., Querejeta, N., & Ouederni, A. (2022) · Journal of Porous Materials · doi:10.1007/s10934-022-01240-2 · Cited by 8
“15 bar is often taken as an indication of the potential application of an adsorbent in post-combustion CO2 capture, when the flue gas steam from power stations is typically a mixture of 15% CO2 (70–75%) N2 and (5–7%) H2O [52, 53].”
BackgroundInfluentialSeparation performance of CO2 by hybrid membrane comprising nanoporous carbide derived carbon
Najimu, M. O., & Aljundi, I. H. (2018) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2018.08.007 · Cited by 8
CO2 Adsorption in Activated Carbon Materials
Reljic, S., Jardim, E. D. O., Collados, C. C., Bayona, M., Escandell, M. M., Silvestre‐Albero, J., & Rodríguez-Reinoso, F. (2021) · Engineering materials · doi:10.1007/978-3-030-65991-2_5 · Cited by 10
Activated Carbons Produced from Hydrothermally Carbonized Prickly Pear Seed Waste
Hsini, N., Saadattalab, V., Wang, X., Gharred, N., Dhaouadi, H., Dridi‐Dhaouadi, S., & Hedin, N. (2022) · Sustainability · doi:10.3390/su142114559 · Cited by 9
Solovtsova, O. V., Men’shchikov, I. E., Shkolin, A. V., Grinchenko, A. E., Khozina, E. V., & Фомкин, А. А. (2023) · Gases · doi:10.3390/gases3030008 · Cited by 8
“Presser et al. obtained a linear correlation between the CO 2 adsorption capacity of the nitrogen-free carbide-derived ACs and the volume of pores with a size less than 0.8 nm [47].”
BackgroundInfluentialSarkar, K., & Talukder, M. A. (2024) · Materials Advances · doi:10.1039/d4ma00171k · Cited by 8
Nanocomposite Titania–Carbon Spheres as CO2 and CH4 Sorbents
Morawski, A. W., Staciwa, P., Sibera, D., Moszyński, D., Zgrzebnicki, M., & Narkiewicz, U. (2020) · ACS Omega · doi:10.1021/acsomega.9b03806 · Cited by 8
A Peach‐Kernel‐Derived Ultramicroporous Carbon with Extremely High CO 2 ‐Capture Ability
Shui, L., Wang, L., & Lin, Y. (2023) · ChemistrySelect · doi:10.1002/slct.202204287 · Cited by 8
Jiang, H., Xie, X., Chen, J., Guo, X., He, Y., & Lian, Z. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.132812 · Cited by 7
He, X., Zhao, T., Sun, Z., Islam, M. A., Eljamal, O., & Saha, B. B. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.110300 · Cited by 7
Zhang, Y., Sun, F., Yang, C.-W., Wei, G., Wang, J., Qu, Z., Zuo, J., Gao, J., & Liu, S. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c17958 · Cited by 9
Biomass Waste Turning into Low-Cost Microporous Carbon Adsorbents for Post-Combustion CO2 Capture
Swapna, S., Ramesh, A., Venugopal, A., Mallesh, D., Vinod, G., Gangareddy, K., Shashikala, V., Prathap, C., & Radhika, M. (2024) · Russian Journal of General Chemistry · doi:10.1134/s1070363224050165 · Cited by 7
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2022) · Reaction Chemistry & Engineering · doi:10.1039/d2re00003b · Cited by 7
Siemak, J., Wróbel, R. J., Pęksiński, J., & Michalkiewicz, B. (2023) · Materials · doi:10.3390/ma16124390 · Cited by 7
Tailoring Nitrogen‐Doped Activated Carbons: Central Composite Design for Enhanced CO 2 Adsorption
Rangel‐Sequeda, J. F., Loredo‐Cancino, M., Águeda, V. I., & Martínez‐Vargas, D. X. (2024) · ChemistrySelect · doi:10.1002/slct.202302805 · Cited by 8
Jha, R. K., Bhunia, H., & Basu, S. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e27439 · Cited by 7
“The literature also outlines the facilitation of low-pressure CO 2 adsorption through smaller pores [66].”
BackgroundLiu, D., Li, J., Dong, J., Li, S., Feng, W., & Jia, B. (2019) · Processes · doi:10.3390/pr7110801 · Cited by 8
The effects of reactor design on the synthesis of titanium carbide-derived carbon
Dutzer, M. R., Mangarella, M. C., Schott, J. A., Dai, S., & Walton, K. S. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.11.019 · Cited by 7
Xie, C., Huo, F. W., Huang, Y., Cheng, Y., Liu, G., & Xiang, Z. (2016) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201600219 · Cited by 8
Zhang, K., & Zhang, H. J. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.4c12168 · Cited by 6
Amar, M. N., Alatefi, S., Alkouh, A. B., & Agwu, O. E. (2025) · Adsorption · doi:10.1007/s10450-025-00661-0 · Cited by 6
“Additionally, a threshold exists beyond which further increases in pore volume yield diminishing returns for AC, as documented in some prior studies [ 85, 86 ].”
Xie, Y., Wang, Z., Wang, Y., Liu, Y., Zhang, H., Yang, R., Li, W., Marin, E., Pezzotti, G., & Zhu, W. (2024) · Journal of Porous Materials · doi:10.1007/s10934-024-01697-3 · Cited by 6
“For example, at 1 and 0.1 bar (100 and 10 kPa), for pores smaller than 0.8 and 0.5 nm, respectively, AC may have highest contribution to CO 2 adsorption [67], owing to the dynamic diameters of CO 2 with 0.33 nm [68].”
InfluentialKhosravi, A., Khani, M. R., & Shokri, B. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2025.06.010 · Cited by 6
Preparation and CO2 Adsorption Properties of Porous Particles Based on Alkaline Solid Wastes
Lu, W., Su, H., Qi, G., Zhang, H., Wang, M., & Hu, X. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c01667 · Cited by 6
Zhang, X., & Lu, A. (2019) · Wiley eBooks · doi:10.1002/9781119091219.ch3 · Cited by 6
Chang, L.-H., & Yu, H.-Y. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.12.019 · Cited by 6
Peredo-Mancilla, D., Ghouma, I., Hort, C., Bessières, D., & Ghimbeu, C. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814893-8.00009-2 · Cited by 6
“5 nm that are the main contributors (Presser et al., 2011).”
BackgroundMatsutaka, H., Kashifuku, A., Orii, T., Miyajima, D., Uchiyama, N., Wada, S., & Nishihara, H. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta00993f · Cited by 5
Adsorption Mechanisms and AI‐Driven Discovery of Biomass‐Based CO 2 Sorbents
Hajiali, F., Chen, J., Zou, T., Renneckar, S. H., Gopaluni, R. B., Ellis, N., & Rojas, O. J. (2025) · Small · doi:10.1002/smll.202504877 · Cited by 7
Production of Sustainable Adsorbents for CO2 Capture Applications from Food Biowastes
Rubiera, F., Córdoba, C., Pena, T., & Plaza, M. G. (2024) · Energies · doi:10.3390/en17051205 · Cited by 5
Nitrogen-Enriched Hierarchical Porous Carbon for Carbon Dioxide Adsorption and Separation
Jin, Z., Tong., L. I., & Lu, A. (2015) · Acta Physico-Chimica Sinica · doi:10.3866/pku.whxb201506181 · Cited by 5
Sustainable building materials employing solid diamines as CO2 sorbents
Lee, S., Ahn, Y., & Koh, D. (2022) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-022-1061-z · Cited by 5
A simple, sustainable route to flexible microporous carbon cloth for energy storage applications
Alkhaldi, T., Blankenship, L. S., & Mokaya, R. (2023) · Materials Advances · doi:10.1039/d3ma00157a · Cited by 6
Apaydın, D. H., Głowacki, E. D., Portenkirchner, E., & Sariçiftçi, N. S. (2014) · Angewandte Chemie · doi:10.1002/ange.201403618 · Cited by 5
RNA as a Precursor to N-Doped Activated Carbon
Lee, K. K., Church, T. L., & Hedin, N. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00589 · Cited by 5
Zgrzebnicki, M., Michalczyszyn, E., & Wróbel, R. J. (2018) · Green Sciences · doi:10.2478/pjct-2018-0043 · Cited by 5
Activated carbons from common nettle as potential adsorbents for CO 2 capture
Szymańska, A., Skoczek, A., & Przepiórski, J. (2019) · Green Sciences · doi:10.2478/pjct-2019-0011 · Cited by 5
Molten alkaline synthesis of highly porous carbon from calcium carbide
Guo, M. L., Chen, X., Zhang, X., Dang, Q., Qiu, C., Wang, Y., & Zhang, G. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.01.014 · Cited by 5
Ali, D. A., Elgamal, A. A., & Moussa, R. R. (2025) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2025.103919 · Cited by 4
Yue, W., Yu, Z., Liu, H., Xiao, W., Zheng, Z., Wang, X., & Ma, X. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.136596 · Cited by 6
Cho, A. R., Won, Y., Nam, H., Park, J. H., Jo, S.-H., Kim, J., Park, Y. C., Bae, Y., & Lee, Y.-R. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.136930 · Cited by 4
Xuan, K., Wu, J., Zhang, Y., Zhong, L., Othman, R. M., Lithoxoos, G. P., Almansour, F., Shakhs, A. N. A., Wang, J. Y., Sun, X., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173381 · Cited by 5
Song, J., Wang, X., Liu, X., Sun, C., Snape, C. E., Li, J., Hu, Z., & Wang, W. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106674 · Cited by 4
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.