Effect of pore size on carbon dioxide sorption by carbide derived carbon
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Items 201–300 of 679
Gadipelli, S., Howard, C. A., Guo, J., Skipper, N. T., Zhang, H., Shearing, P. R., & Brett, D. J. L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903649 · Cited by 79
Amer, N. M., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02905-3 · Cited by 78
“Studies have indicated that for efficient CO 2 capture at 1 bar, it is necessary to generate a high volume of micropo-res with pore size in the range of 0.5–0.7 nm [130].”
InfluentialZhang, L., Wang, J., Liu, Z., Lu, Y., Chu, G., Wang, W., & Chen, J. (2013) · AIChE Journal · doi:10.1002/aic.14072 · Cited by 74
Review and analysis of porous adsorbents for effective CO2 capture
Foorginezhad, S., Weiland, F., Chen, Y., Hussain, S., & Ji, X. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115589 · Cited by 79
Holey graphene frameworks for highly selective post-combustion carbon capture
Chowdhury, S., & Balasubramanian, R. (2016) · Scientific Reports · doi:10.1038/srep21537 · Cited by 72
New strategy to prepare ultramicroporous carbon by ionic activation for superior CO2 capture
Liu, Z., Zhang, Z., Jia, Z., Zhao, L., Zhang, T., Xing, W., Komarneni, S., Subhan, F., & Yan, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.184 · Cited by 75
Preparation of biomass-derived porous carbons by a facile method and application to CO2 adsorption
Li, Q., Liu, S., Peng, W., Zhu, W., Wang, L., Chen, F., Shao, J., & Hu, X. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.11.001 · Cited by 70
Luo, J., Liu, B., Shi, R., Guo, Y., Feng, Q., Liu, Z., Li, L., & Norinaga, K. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111404 · Cited by 71
Plaza, M. G., Rubiera, F., & Pevida, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01508 · Cited by 68
Bai, J., Huang, J., Jiang, Q., Jiang, W., Demir, M., Kılıç, M., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.131916 · Cited by 70
Micro/Mesoporous Activated Carbons Derived from Polyaniline: Promising Candidates for CO2 Adsorption
Silvestre‐Albero, A., Silvestre‐Albero, J., Escandell, M. M., & Rodríguez-Reinoso, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5013129 · Cited by 72
Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture
Zhang, X., Elsayed, I., Song, X., Shmulsky, R., & Hassan, E. B. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142465 · Cited by 70
Self S-doping activated carbon derived from lignin-based pitch for removal of gaseous benzene
He, S., Shi, G., Xiao, H., Sun, G., Shi, Y., Chen, G., Dai, H., Yuan, B., Chen, X., & Yang, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128286 · Cited by 71
Imidazole-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Sang, Y., & Huang, J. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.08.025 · Cited by 69
Xia, K., Tian, X., Fei, S., & You, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.059 · Cited by 68
“[10] Presser V, McDonough J, Yeon S-H, Gogotsi Y.”
BackgroundEffect of metal oxides modification on CO2 adsorption performance over mesoporous carbon
Li, M., Huang, K., Schott, J. A., Wu, Z., & Dai, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.033 · Cited by 68
Geng, J., Xue, D., Liu, X., Shi, Y., & Sun, L. (2016) · AIChE Journal · doi:10.1002/aic.15531 · Cited by 68
Efficient N-Doped Porous Carbonaceous CO2 Adsorbents Derived from Commercial Urea-Formaldehyde Resin
Huang, J., Bai, J., Demir, M., Hu, X. D., Jiang, Z., & Wang, L. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c00748 · Cited by 67
High selectivity of TiC-CDC for CO2/N2 separation
Silvestre‐Albero, A., Rico‐Francés, S., Rodríguez-Reinoso, F., Kern, A. M., Klumpp, M., Etzold, B. J. M., & Silvestre‐Albero, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.012 · Cited by 67
“Previous studies described in the literature using similar materials have shown that CO2 adsorption capacity correlates with the total volume of specific pores depending on the final pressure achieved [26].”
BackgroundResultInfluentialAdvancing frontiers in CO2 capture: The renaissance of biomass-derived carbon materials
Umar, M., Yusuf, B. O., Aliyu, M., Hussain, I., Alhassan, A. M., Awad, M. M., Taialla, O. A., Ali, B., Alhooshani, K. R., & Ganiyu, S. A. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.216380 · Cited by 68
Yu, Q., Bai, J., Huang, J., Demir, M., Farghaly, A. A., Aghamohammadi, P., Hu, X. D., & Wang, L. (2023) · Molecules · doi:10.3390/molecules28041772 · Cited by 65
“Since the narrow micropores (<1 nm) were well-recognized as the key factor that determines the CO2 uptake of porous carbons under 1 bar and 25 °C conditions [59,60], herein, the volume of narrow micropores (Vn) in the MFC-T-m samples was calculated using the Dubinin−Radushkevich (D−R) equation based on their CO2 adsor…”
Nitrogen-doped porous carbon spheres derived from d-glucose as highly-efficient CO2 sorbents
Xu, L., Guo, L., Hu, G., Chen, J., Hu, X., Wang, S., Dai, W., & Fan, M. (2015) · RSC Advances · doi:10.1039/c5ra04421a · Cited by 64
Taddei, M., & Petit, C. (2021) · Molecular Systems Design & Engineering · doi:10.1039/d1me00085c · Cited by 65
Tian, L., Zhi, Y., Yu, Q., Xu, Q., Demir, M., Çolak, S. G., Farghaly, A. A., Wang, L., & Hu, X. D. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02372 · Cited by 64
Activated carbon derived from waste coffee grounds for stable methane storage
Kemp, K. C., Baek, S. B., Lee, W., Meyyappan, M., & Kim, K. S. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/38/385602 · Cited by 63
Plaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01720 · Cited by 62
Tailored Gas Adsorption Properties of Electrospun Carbon Nanofibers for Gas Separation and Storage
Kretzschmar, A., Selmert, V., Weinrich, H., Kungl, H., Tempel, H., & Eichel, R. (2020) · ChemSusChem · doi:10.1002/cssc.202000520 · Cited by 65
Plaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04856 · Cited by 61
Effect of ZnCl2 activation on CO2 adsorption of N-doped nanoporous carbons from polypyrrole
Meng, L., & Park, S. (2014) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2014.06.005 · Cited by 61
Kim, H. S., Kang, M. S., & Yoo, W. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10552 · Cited by 64
Huang, K., Chai, S., Mayes, R. T., Tan, S., Jones, C. W., & Dai, S. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.041 · Cited by 65
Phosphate removal from synthetic and treated sewage effluent by carbide derive carbon
Almanassra, I. W., Кочкодан, В., Subeh, M. I. A. K., McKay, G., Atieh, M. A., & Al‐Ansari, T. A. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2020.101323 · Cited by 64
Luo, L., Yang, C., Yang, X., Liu, F., Wang, X., Chen, P., & Zhao, T. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122134 · Cited by 60
Nitrogen-Enriched Porous Polyacrylonitrile-Based Carbon Fibers for CO2 Capture
Li, L., Wang, X., Zhong, J., Qian, X., Song, S., Zhang, Y., & Li, D. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b01836 · Cited by 60
Lee, D., Zhang, C., Wei, C., Ashfeld, B. L., & Gao, H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13424e · Cited by 59
Goel, C., Bhunia, H., & Bajpai, P. K. (2015) · RSC Advances · doi:10.1039/c5ra16255f · Cited by 59
Krüner, B., Srimuk, P., Fleischmann, S., Zeiger, M., Schreiber, A., Aslan, M., Quade, A., & Presser, V. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.054 · Cited by 59
Self-citationUltra-microporous N-doped carbon from polycondensed framework precursor for CO2 adsorption
Tian, Z., Huang, J., Zhang, X., Shao, G., He, Q., Cao, S., & Yuan, S. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.012 · Cited by 59
Wilson, S. M. W., Al-Enzi, F., Gabriel, V. A., & Tezel, F. H. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111089 · Cited by 58
Chen, J., Sun, J., Chen, Y., Guo, Y., Han, D., Wang, R., & Zhao, C. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119270 · Cited by 58
Probing the role of O-containing groups in CO2 adsorption of N-doped porous activated carbon
Wang, M., Fan, X., Zhang, L., Liu, J., Wang, B., Cheng, R., Li, M., Tian, J., & Shi, J. (2017) · Nanoscale · doi:10.1039/c7nr05977a · Cited by 57
Xu, C., Ruan, C., Li, Y., Lindh, J., & Strømme, M. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700147 · Cited by 61
Standing out the key role of ultramicroporosity to tailor biomass-derived carbons for CO2 capture
Querejeta, N., Gil, M. V., Pevida, C., & Centeno, T. A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.04.016 · Cited by 59
A review on the effect of amination pretreatment for the selective separation of CO2
Adelodun, A. A., Kim, K., Ngila, J. C., & Szulejko, J. E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.107 · Cited by 56
Wei, Y., Tao, Y., Zhang, C. J., Wang, J., Qiao, W., Ling, L., & Long, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.12.012 · Cited by 56
Krüner, B., Lee, J., Jäckel, N., Tolosa, A., & Presser, V. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00669 · Cited by 56
Self-citationPeng, Z., Guo, Z., Chu, W., & Wei, M. (2016) · RSC Advances · doi:10.1039/c5ra26044b · Cited by 58
Liu, X., Sun, Y. M., Liu, J., Sun, C., Liu, H., Xue, Q., Smith, E. F., & Snape, C. E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06665 · Cited by 64
Enhanced CO2 Adsorption on Nitrogen-Doped Porous Carbons Derived from Commercial Phenolic Resin
Yue, L., Rao, L., Wang, L., Sun, Y. J., Wu, Z., DaCosta, H. F. M., & Hu, X. D. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03646 · Cited by 58
Potassium metaborate-activated boron-doped porous carbons for selective CO2 adsorption
Wang, J., Yin, Y., Liu, X., Liu, Y., Xiao, Q., Zhao, L., Demir, M., Çolak, M. Ö. A., Wang, L., & Hu, X. D. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.134079 · Cited by 55
Hwang, J., Walczak, R., Oschatz, M., Tarakina, N. V., & Schmidt, B. V. K. J. (2019) · Small · doi:10.1002/smll.201901986 · Cited by 55
Decoding Carbon-Based Materials’ Properties for High CO 2 Capture and Selectivity
Mehra, P., & Paul, A. (2022) · ACS Omega · doi:10.1021/acsomega.2c04269 · Cited by 54
Masika, E., & Mokaya, R. (2013) · RSC Advances · doi:10.1039/c3ra43420f · Cited by 53
Shi, J., Yan, N., Cui, H., Liu, Y., Weng, Y., Li, D., & Ji, X. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.010 · Cited by 55
He, X., Liu, J., Jiang, Y.-W., Muhammad, Y., Guan, H., Sun, J., Cui, X., Liao, D., & Tong, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.031 · Cited by 54
Meier, A., Weinberger, M., Pinkert, K., Oschatz, M., Paasch, S., Giebeler, L., Althues, H., Brunner, E., Eckert, J., & Kaskel, S. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.12.022 · Cited by 53
Lee, J., Tolosa, A., Krüner, B., Jäckel, N., Fleischmann, S., Zeiger, M., Kim, D.-K., & Presser, V. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00062b · Cited by 53
Self-citationHeo, Y.-J., & Park, S.-J. (2018) · Green Chemistry · doi:10.1039/c8gc02570c · Cited by 52
Shen, Z., Song, Y., Yin, C., Luo, X., Wang, Y., & Li, X. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2021.111158 · Cited by 53
Shao, J., Wang, Y., Liu, C., Xiao, Q., Demir, M., Mesfer, M. K. A., Danish, M., Wang, L., & Hu, X. D. (2024) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2024.106946 · Cited by 53
Kinetics and Structural Changes in CO2 Capture of K2CO3 under a Moist Condition
Luo, H., Chioyama, H., Thürmer, S., Ohba, T., & Kanoh, H. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00578 · Cited by 52
Zhang, L., Li, W., Liu, H. S., Wang, Q., Tang, L., Hu, Q., Xu, W., Qiao, W., Lu, Z., & Lu, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201712913 · Cited by 52
Zgrzebnicki, M., Nair, V. K., Mitra, S., Kałamaga, A., Przepiórski, J., & Wróbel, R. J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131709 · Cited by 52
Deepak, K. R., Mohan, S., Dinesha, P., & Balasubramanian, R. (2023) · Journal of Environmental Management · doi:10.1016/j.jenvman.2023.118350 · Cited by 53
Modak, A., Maegawa, Y., Goto, Y., & Inagaki, S. (2015) · Polymer Chemistry · doi:10.1039/c5py01900a · Cited by 51
Multiscale textured, ultralight graphene monoliths for enhanced CO2 and SO2 adsorption capacity
Yun, S., Lee, H., Lee, W., & Park, H. S. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.068 · Cited by 51
Krüner, B., Odenwald, C., Tolosa, A., Schreiber, A., Aslan, M., Kickelbick, G., & Presser, V. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00265c · Cited by 51
Self-citationHo, K., Park, D., Park, M.-K., & Lee, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125215 · Cited by 50
Changes in Porous Parameters of the Ion Exchanged X Zeolite and Their Effect on CO2 Adsorption
Gęsikiewicz-Puchalska, A., Zgrzebnicki, M., Michalkiewicz, B., Kałamaga, A., Narkiewicz, U., Morawski, A. W., & Wróbel, R. J. (2021) · Molecules · doi:10.3390/molecules26247520 · Cited by 50
Shao, J., Wang, Y., Che, M., Liu, Y., Jiang, Y., Xiao, Q., Demir, M., Wang, L., & Hu, X. D. (2025) · Molecules · doi:10.3390/molecules30020426 · Cited by 50
“This confinement effect enhances the adsorptive capacity, especially under low pressures and room temperature, making such materials highly suitable for practical applications [21,22].”
CO2 adsorbent pellets produced from pine sawdust: Effect of coal tar pitch addition
Plaza, M. G., Durán, I., Rubiera, F., & Pevida, C. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.090 · Cited by 48
“Narrow micropores are of the utmost importance for the adsorption of CO2 in postcombustion conditions (low partial pressures of CO2) [36-38].”
BackgroundSun, N., Tang, Z., Wei, W., Snape, C. E., & Sun, Y. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00009 · Cited by 55
“…hydrogen, after activation, one of the samples exhibited a high CO2 adsorption capacity of 31.2 wt. % at 0°C and 1 bar, a linearship between CO2 uptake and the pore volume of narrow micropores was observed confirming their importance to the adsorption of CO2 at low pressures (Presser et al., 2011).”
BackgroundInfluentialPrehal, C., Koczwara, C., Jäckel, N., Amenitsch, H. W., Presser, V., & Paris, O. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00736a · Cited by 50
Self-citationRehman, A., & Park, S.-J. (2018) · Scientific Reports · doi:10.1038/s41598-018-24308-z · Cited by 49
Almanassra, I. W., Кочкодан, В., Ponnusamy, G., McKay, G., Atieh, M. A., & Al‐Ansari, T. A. (2020) · Journal of Environmental Health Science and Engineering · doi:10.1007/s40201-020-00554-0 · Cited by 49
N, S Co-doped porous carbons from coconut shell for selective CO2 adsorption
Shao, J., Wang, Y., Che, M., Xiao, Q., Demir, M., Mesfer, M. K. A., Wang, L., Hu, X. D., & Liu, Y. (2025) · Journal of the Energy Institute · doi:10.1016/j.joei.2025.102273 · Cited by 49
Low-cost hierarchical micro/macroporous carbon foams as efficient sorbents for CO 2 capture
Rodríguez, E., & García, R. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.002 · Cited by 51
“These results are in agreement with those reported by Presser [35], confirming that, at sub-atmospheric pressures, CO2 adsorption is proportional to the amount of pores below 0.5 nm, whereas the micropores below 0.8 nm play an important role in the adsorption process at atmospheric pressure and ambient temperature.”
ResultInfluentialTetraethyl orthosilicate-assisted synthesis of nitrogen-containing porous carbon spheres
Ghimire, P. P., Gunathilake, C. A., Wickramaratne, N. P., & Jaroniec, M. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.007 · Cited by 49
Waste wool derived nitrogen-doped hierarchical porous carbon for selective CO 2 capture
Li, Y., Xu, R., Wang, X., Wang, B., Cao, J., Yang, J., & Wei, J. (2018) · RSC Advances · doi:10.1039/c8ra02701c · Cited by 52
Development of sorbent materials for direct air capture of CO2
Shi, X., Lin, Y., & Chen, X. (2022) · MRS Bulletin · doi:10.1557/s43577-022-00320-7 · Cited by 50
Polyacrylonitrile-derived nitrogen enriched porous carbon fiber with high CO2 capture performance
Ma, C., Bai, J., Demir, M., Yu, Q., Hu, X. D., Jiang, W., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122299 · Cited by 49
Li, Z., Wu, D., Liang, Y., Xu, F., & Fu, R. (2013) · Nanoscale · doi:10.1039/c3nr04236g · Cited by 48
Cooperative CO 2 adsorption promotes high CO 2 adsorption density over wide optimal nanopore range
Chen, L., Watanabe, T., Kanoh, H., Hata, K., & Ohba, T. (2017) · Adsorption Science & Technology · doi:10.1177/0263617417713573 · Cited by 48
“…(Chandra et al., 2012; D’Alessandro et al., 2010; Hornbostel et al., 2013; Marco-Lozar et al., 2012; Martı́n et al., 2011, 2010; Plaza et al., 2010; Samanta et al., 2012; Sevilla et al., 2012; Sevilla and Fuertes, 2012; Suzuki, 1994; Wang et al., 2011; Xia et al., 2011; Yoon et al., 2004; Zhao…”
Dang, Y., Guo, W., Zhao, L., & Zhu, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10836 · Cited by 48
Liang, J., Song, Q., Lin, J., Huang, Y., Fang, Y. W., Yu, C., Xue, Y., Liu, Z., & Tang, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.081 · Cited by 48
Influence of ammonia treatment on the CO2 adsorption of activated carbon
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107273 · Cited by 50
Green coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
“The CO2 adsorption performance of a porous carbon is mainly governed by its pore size distribution and the operation conditions (temperature and pressure) [25, 26].”
BackgroundInfluentialPlant derived porous graphene nanosheets for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2014) · RSC Advances · doi:10.1039/c4ra05522e · Cited by 47
Resorcinol–formaldehyde resin-based porous carbon spheres with high CO2 capture capacities
Wang, X., Zhou, J. P., Xing, W., Liu, B., Zhang, J., Lin, H., Cui, H., & Zhuo, S. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.010 · Cited by 49
Ordered mesoporous carbide-derived carbons prepared by soft templating
Borchardt, L., Oschatz, M., Lohe, M. R., Presser, V., Gogotsi, Y. G., & Kaskel, S. (2012) · Carbon · doi:10.1016/j.carbon.2012.04.006 · Cited by 46
“[13] Presser V, McDonough J, Yeon S-H, Gogotsi Y.”
BackgroundSelf-citationPreparation and adsorption properties of aerocellulose-derived activated carbon monoliths
Dassanayake, R. S., Gunathilake, C. A., Jackson, T., Jaroniec, M., & Abidi, N. (2016) · Cellulose · doi:10.1007/s10570-016-0886-1 · Cited by 47
“Presser et al. (2011) and Hu et al. (2011) studied the effect of the micropore size on the CO2 adsorption and showed that the micropores with sizes below 1 nm are responsible for high CO2 uptake at ambient conditions.”
BackgroundWang, Y., Wang, J., Ma, C., Qiao, W., & Ling, L. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.08.063 · Cited by 46
Grundy, M., & Ye, Z. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04038d · Cited by 50
Crystal orientation of epitaxial LiCoO2 films grown on SrTiO3 substrates
Nishio, K., Ohnishi, T., Akatsuka, K., & Takada, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.132 · Cited by 45
Zeng, G., Lou, S., Ying, H., Wu, X., Dou, X., Ai, N., & Wang, J. (2018) · Journal of Chemistry · doi:10.1155/2018/4319149 · Cited by 44
“8 nm played a key role in determining CO2 capture on N-free carbide-derived carbons at 1 bar [22].”
BackgroundCao, M., Shu, Y., Bai, Q., Li, C., Chen, B., Shen, Y., & Uyama, H. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163750 · Cited by 44
Han, M., Jiang, K., Jiao, P., Ji, Y., Zhou, J., Zhuang, W., Chen, Y., Liu, D., Zhu, C., Chen, X., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-12062-7 · Cited by 50
Sulfur doped microporous carbons for CO 2 adsorption
Shi, J., Yan, N., Cui, H., Liu, Y., & Weng, Y. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.002 · Cited by 44
One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance
Yu, Q., Bai, J., Huang, J., Demir, M., Altay, B. N., Hu, X. D., & Wang, L. (2022) · Molecules · doi:10.3390/molecules27206816 · Cited by 44
“Previous studies have pointed out the importance of narrow micropores (<1 nm) that allow higher CO2 adsorption and CO2/N2 selectivity [44,45].”
BackgroundBartolomei, M., & Giorgi, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08743 · Cited by 44
“found[45] that at such conditions the CO2 sorption is mostly determined by pores with diameter smaller than 0.”
Background
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.