Effect of pore size on carbon dioxide sorption by carbide derived carbon
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Items 101–200 of 679
Robertson, C., & Mokaya, R. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.05.025 · Cited by 135
Wei, H., Chen, H., Fu, N., Chen, J., Lan, G., Qian, W., Liu, Y., Lin, H., & Han, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.01.194 · Cited by 135
In-situ ion-activated carbon nanospheres with tunable ultramicroporosity for superior CO2 capture
Zhang, Z., Luo, D., Lui, G., Li, G., Jiang, G., Cano, Z. P., Deng, Y., Du, X., Song, Y., Chen, Y., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.096 · Cited by 138
Liu, S., Ma, R., Hu, X., Wang, L., Wang, X., Radosz, M., & Fan, M. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 133
Dilokekunakul, W., Teerachawanwong, P., Klomkliang, N., Supasitmongkol, S., & Chaemchuen, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124413 · Cited by 129
Schneidermann, C., Jäckel, N., Oswald, S., Giebeler, L., Presser, V., & Borchardt, L. (2017) · ChemSusChem · doi:10.1002/cssc.201700459 · Cited by 134
Self-citationLiu, X., Sun, C., Liu, H., Tan, W. H., Wang, W., & Snape, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.062 · Cited by 132
Nazir, G., Rehman, A., & Park, S. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101641 · Cited by 137
Shao, J., Wang, J., Yu, Q., Yang, F., Demir, M., Altıncı, O. C., Umay, A., Wang, L., & Hu, X. D. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125891 · Cited by 132
Activated carbon monoliths for gas storage at room temperature
Marco-Lozar, J. P., Kunowsky, M., Suárez-García, F., Carruthers, J. D., & Linares-Solano, A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22769j · Cited by 133
Carbon materials as CO2 adsorbents: a review
Sharma, A., Jindal, J., Mittal, A. K., Kumari, K., Maken, S., & Kumar, N. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01153-z · Cited by 146
Qian, D., Lei, C., Wang, E., Li, W., & Lu, A. (2014) · ChemSusChem · doi:10.1002/cssc.201300585 · Cited by 130
Popcorn-Derived Porous Carbon for Energy Storage and CO2Capture
Liang, T., Chen, C., Li, X., & Zhang, J. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01953 · Cited by 129
Rehman, A., Nazir, G., Rhee, K. Y., & Park, S. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.157805 · Cited by 131
Chemically activated fungi-based porous carbons for hydrogen storage
Wang, J., Senkovska, I., Kaskel, S., & Liu, Q. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.016 · Cited by 131
Advances in modification of commercial activated carbon for enhancement of CO2 capture
Sreńscek-Nazzal, J., & Kiełbasa, K. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.07.108 · Cited by 128
Management of surgical mask waste to activated carbons for CO2 capture
Serafin, J., Sreńscek-Nazzal, J., Kamińska, A., Paszkiewicz, O., & Michalkiewicz, B. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101970 · Cited by 124
Biochar as a renewable source for high-performance CO2 sorbent
Li, Y., Ruan, G., Jalilov, A. S., Tarkunde, Y. R., Fei, H., & Tour, J. M. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.010 · Cited by 131
Chen, H., Guo, Y., Xu, L. H., Xu, X., Su, C., Zeng, Z., & Li, L. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128824 · Cited by 128
Lignin-Based Porous Supraparticles for Carbon Capture
Zhao, B., Borghei, M., Zou, T., Wang, L., Johansson, L., Majoinen, J., Sipponen, M. H., Österberg, M., Mattos, B. D., & Rojas, O. J. (2021) · ACS Nano · doi:10.1021/acsnano.0c10307 · Cited by 129
Salt Template Synthesis of Nitrogen and Sulfur Co-Doped Porous Carbons as CO2 Adsorbents
Shi, J., Yan, N., Cui, H., Xu, J., Liu, Y., & Zhang, S. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04574 · Cited by 125
Shi, X., Lee, G. A., Liu, S., Kim, D., Alahmed, A. H., Jamal, A., Wang, L., & Park, A. A. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.004 · Cited by 127
Designed porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
Designing Carbon‐Based Porous Materials for Carbon Dioxide Capture
Singh, R., Wang, L., Ostrikov, K., & Huang, J. (2023) · Advanced Materials Interfaces · doi:10.1002/admi.202202290 · Cited by 125
Strategies to enhance CO 2 capture and separation based on engineering absorbent materials
Lü, X., Jin, D., Wei, S., Wang, Z., An, C., & Guo, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06829g · Cited by 124
Cai, J., Qi, J., Yang, C., & Zhao, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500037b · Cited by 120
Preparation of low-cost activated carbons from amazonian nutshells for CO2 storage
Serafin, J., Ouzzine, M., Cruz Junior, O. F., & Sreńscek-Nazzal, J. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105925 · Cited by 115
Nakatsuka, K., Yoshii, T., Kuwahara, Y., Mori, K., & Yamashita, H. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201704341 · Cited by 119
Li, Q., Lu, T., Wang, L., Pang, R., Shao, J., Liu, L., & Hu, X. D. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.119204 · Cited by 119
Talapaneni, S. N., Lee, J. H., Je, S. H., Büyükçakır, O., Kwon, T., Polychronopoulou, K., Choi, J. W., & Coşkun, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604658 · Cited by 121
Yang, P., Rao, L., Zhu, W., Wang, L., Ma, R., Chen, F., Lin, G., & Hu, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00073 · Cited by 117
Liu, Z., Du, Z., Song, H., Wang, C., Subhan, F., Xing, W., & Yan, Z. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.10.061 · Cited by 121
N-doped porous carbon derived from macadamia nut shell for CO2 adsorption
Bai, J., Huang, J., Yu, Q., Demir, M., Kılıç, M., Altay, B. N., Hu, X. D., & Wang, L. (2023) · Fuel Processing Technology · doi:10.1016/j.fuproc.2023.107854 · Cited by 114
Rouzitalab, Z., Mohammady Maklavany, D., Rashidi, A., & Jafarinejad, S. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.10.035 · Cited by 109
Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112
Schneidermann, C., Kensy, C., Otto, P., Oswald, S., Giebeler, L., Leistenschneider, D., Grätz, S., Dörfler, S., Kaskel, S., & Borchardt, L. (2018) · ChemSusChem · doi:10.1002/cssc.201801997 · Cited by 112
Nitrogen-doped porous carbons from polyacrylonitrile fiber as effective CO2 adsorbents
Ma, C., Bai, J., Hu, X., Jiang, Z., & Wang, L. (2023) · Journal of Environmental Sciences · doi:10.1016/j.jes.2022.03.016 · Cited by 114
Mukhtar, A., Saqib, S., Mellon, N. B., Babar, M., Rafiq, S., Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Muhammad, N., & Chawla, M. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103203 · Cited by 116
Guo, L., Yang, J., Hu, G., Hu, X., Wang, L., Dong, Y., DaCosta, H., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 112
A cost-effective synthesis of heteroatom-doped porous carbons as efficient CO 2 sorbents
Ashourirad, B., Arab, P., İslamoğlu, T., Cychosz, K. A., Thommes, M., & El‐Kaderi, H. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06251b · Cited by 117
Porous organic cages for efficient gas selective separation and iodine capture
Liu, C., Li, W., Liu, Y., Wang, H., Yu, B., Bao, Z., & Jiang, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131129 · Cited by 111
Carbon‐based adsorbents for post‐combustion capture: a review
Zhao, H., Luo, X., Zhang, H., Sun, N., Wei, W., & Sun, Y. (2018) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1758 · Cited by 104
Effective nitrogen and sulfur co-doped porous carbonaceous CO2 adsorbents derived from amino acid
Shao, J., Ma, C., Zhao, J., Wang, L., & Hu, X. D. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127750 · Cited by 109
Wu, D., Li, Z., Zhong, M., Kowalewski, T., & Matyjaszewski, K. A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309836 · Cited by 113
Oxygen-containing functional group-facilitated CO2 capture by carbide-derived carbons
Xing, W., Liu, C., Zhou, Z., Zhou, J., Wang, G., Zhuo, S., Xue, Q., Song, L., & Yan, Z. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-189 · Cited by 101
“The carbide-derived carbons (CDCs) were prepared by chlorinating TiC according to the literatures [30,31].”
MethodAdeniran, B., & Mokaya, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06539e · Cited by 105
Chen, T., Deng, S., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · RSC Adv. · doi:10.1039/c5ra04937g · Cited by 104
Heo, Y., & Park, S. (2015) · Energy · doi:10.1016/j.energy.2015.08.033 · Cited by 106
Sulfur-Enriched Nanoporous Carbon: A Novel Approach to CO 2 Adsorption
Liu, C., Zhi, Y., Yu, Q., Tian, L., Demir, M., Çolak, S. G., Farghaly, A. A., Wang, L., & Hu, X. D. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c06239 · Cited by 104
Gu, S., He, J., Zhu, Y., Wang, Z., Chen, D., Yu, G., Pan, C., Guan, J., & Tao, K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05170 · Cited by 104
Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
Calvo-Muñoz, E. M., García-Mateos, F. J., Rosas, J. M., Rodríguez-Mirasol, J., & Cordero, T. (2016) · Frontiers in Materials · doi:10.3389/fmats.2016.00023 · Cited by 100
Sun, F., Gao, J., Yang, Y., Zhu, Y., Wang, L., Pi, X., Liu, X., Qu, Z., Wu, S., & Qin, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.08.076 · Cited by 103
Yuan, H., Chen, J., Li, D., Chen, H., & Chen, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.206 · Cited by 100
The role of different properties of activated carbon in CO2 adsorption
Yin, G., Liu, Z., Liu, Q., & Wu, W. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.085 · Cited by 102
One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption
Bai, J., Huang, J., Yu, Q., Demir, M., Geçit, F. H., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Fuel Processing Technology · doi:10.1016/j.fuproc.2023.107700 · Cited by 101
Yang, M., Guo, L., Hu, G., Hu, X., Chen, J., Shen, S., Dai, W., & Fan, M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04038 · Cited by 96
Nazir, G., Rehman, A., & Park, S. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.040 · Cited by 98
Nano Day: Celebrating the Next Decade of Nanoscience and Nanotechnology
Kagan, C. R., Fernandez, L. E., Gogotsi, Y. G., Hammond, P. T., Hersam, M. C., Nel, A. E., Penner, R. M., Willson, C. G., & Weiss, P. S. (2016) · ACS Nano · doi:10.1021/acsnano.6b06655 · Cited by 98
Self-citationNazir, G., Rehman, A., & Park, S. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101326 · Cited by 101
Li, Y., Cai, X., Chen, S., Zhang, H., Zhang, K. H. L., Hong, J., Chen, B. H., Kuo, D., & Wang, W. (2018) · ChemSusChem · doi:10.1002/cssc.201800016 · Cited by 96
Konjac glucomannan/cellulose nanofibers composite aerogel supported HKUST-1 for CO2 adsorption
Sun, J., Shang, M., Zhang, M., Yu, S., Yuan, Z., Yi, X., Filatov, S. A., & Zhang, J. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119720 · Cited by 96
Preparation of biomass-based activated carbons and their evaluation for biogas upgrading purposes
Vilella, P. C., Lira, J. A., Azevedo, D. C. S., Bastos-Neto, M., & Stefanutti, R. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.08.017 · Cited by 94
Highly Efficient Nitrogen-Doped Porous Carbonaceous CO2 Adsorbents Derived from Biomass
Pang, R., Lu, T., Shao, J., Wang, L., Wu, X., Qian, X., & Hu, X. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03832 · Cited by 97
Activated carbon‐based composites for capturing CO 2 : a review
Wang, J., Pu, Q., Ning, P., & Lu, S. (2021) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2051 · Cited by 106
Granular KOH-activated carbons from coal-based cokes and their CO2 adsorption capacity
Labus, K., Gryglewicz, S., & Machnikowski, J. (2013) · Fuel · doi:10.1016/j.fuel.2013.10.042 · Cited by 95
Reversible CO2adsorption by an activated nitrogen doped graphene/polyaniline material
Christian Kemp, K., Chandra, V., Saleh, M., & Kim, K. S. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/23/235703 · Cited by 93
Importance of Micropore–Mesopore Interfaces in Carbon Dioxide Capture by Carbon‐Based Materials
Durá, G., Budarin, V. L., Castro‐Osma, J. A., Shuttleworth, P. S., Quek, S. C. Z., Clark, J. H., & NORTH, M. J. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602226 · Cited by 92
Pan, H., Yang, J., Wang, S., Xiong, Z., Cai, W., & Liu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02954f · Cited by 91
Chen, S., Mukherjee, S., Lucier, B. E. G., Guo, Y., Wong, Y. T. A., Terskikh, V. V., Zaworotko, M. J., & Huang, Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06194 · Cited by 91
Luo, L., Chen, T., Li, Z., Zhang, Z., Zhao, W., & Fan, M. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.03.014 · Cited by 92
Nitrogen-containing novolac-derived carbon beads as electrode material for supercapacitors
Krüner, B., Schreiber, A., Tolosa, A., Quade, A., Badaczewski, F. M., Pfaff, T., Smarsly, B. M., & Presser, V. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.029 · Cited by 88
Self-citationSynthesis of PAN/PVDF nanofiber composites-based carbon adsorbents for CO2 capture
Heo, Y., Zhang, Y., Rhee, K. Y., & Park, S. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.08.057 · Cited by 88
Blankenship, L. S., & Mokaya, R. (2022) · Materials Advances · doi:10.1039/d1ma00911g · Cited by 101
Lu, T., Bai, J., Demir, M., Hu, X. D., Huang, J., & Wang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121368 · Cited by 88
Apaydın, D. H., Głowacki, E. D., Portenkirchner, E., & Sariçiftçi, N. S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403618 · Cited by 88
Facile fabrication of nitrogen doped carbon from filter paper for CO2 adsorption
Cui, H., Xu, J., Shi, J., Yan, N., & Liu, Y. (2019) · Energy · doi:10.1016/j.energy.2019.115936 · Cited by 87
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Great Prospects for PAF-1 and its derivatives
Pei, C., Ben, T., & Qiu, S. (2014) · Materials Horizons · doi:10.1039/c4mh00163j · Cited by 86
Bipolar carbide-carbon high voltage aqueous lithium-ion capacitors
Li, J., Kurra, N., Seredych, M., Meng, X., Wang, H., & Gogotsi, Y. G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.11.042 · Cited by 86
Self-citationRehman, A., & Park, S. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.08.015 · Cited by 87
Kou, J., & Sun, L. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02857 · Cited by 87
Samaddar, P., Son, Y., Tsang, D. C. W., Kim, K., & Kumar, S. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.04.013 · Cited by 85
Li, L., Sun, F., Gao, J., Wang, L., Pi, X., & Zhao, G. (2018) · RSC Advances · doi:10.1039/c8ra02127a · Cited by 83
Wang, J., & Liu, Q. (2014) · Nanoscale · doi:10.1039/c3nr05825e · Cited by 82
Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO2 Capture
Xu, C., & Strømme, M. (2019) · Nanomaterials · doi:10.3390/nano9010103 · Cited by 88
“In addition, the plot of CO2 uptake (1 bar, 273 K) versus volumes of ultramicropores in Figure 3c clearly demonstrates that the CO2 uptake at 1 bar correlates strongly with the volume of ultramicropores, which is consistent with previous studies [58,59].”
ResultDíez, N., Álvarez, P., Granda, M., Blanco, C., Santamaría, R., & Menéndez, R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.126 · Cited by 89
Wang, P., Zhang, G., Chen, W., Chen, Q., Jiao, H., Liu, L., Wang, X., & Deng, X. (2020) · ACS Omega · doi:10.1021/acsomega.0c03497 · Cited by 81
Adeniran, B., Masika, E., & Mokaya, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03565h · Cited by 80
Sevilla, M., Sangchoom, W., Balahmar, N., Fuertes, A. B., & Mokaya, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00809 · Cited by 89
Chomiak, K., Gryglewicz, S., Kierzek, K., & Machnikowski, J. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.026 · Cited by 85
Fu, N., Wei, H., Lin, H., Li, L., Ji, C., Yu, N.-B., Chen, H., Han, S., & Xiao, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15723 · Cited by 80
Hao, W., Björnerbäck, F., Trushkina, Y., Oregui Bengoechea, M., Salazar-Alvarez, G., Barth, T., & Hedin, N. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02795 · Cited by 78
Highly selective CO2 capture by nitrogen enriched porous carbons
Cong, H., Zhang, M., Chen, Y., Chen, K., Hao, Y., Zhao, Y., & Feng, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.052 · Cited by 79
“[24] Presser V, McDonough J, Yeon S-H, Gogotsi Y.”
BackgroundLiu, J., Sun, N., Sun, C., Liu, H., Snape, C. E., Li, K., Wei, W., & Sun, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.036 · Cited by 85
Recent progress in materials development for CO 2 conversion: issues and challenges
Ghosh, S., Modak, A., Samanta, A., Kole, K., & Jana, S. (2021) · Materials Advances · doi:10.1039/d1ma00107h · Cited by 78
Zhang, Y., Li, B., Williams, K., Gao, W., & Ma, S. (2013) · Chemical Communications · doi:10.1039/c3cc45252b · Cited by 78
Abdelmoaty, Y. H., Tessema, T.-D., Norouzi, N., El‐Kadri, O. M., Turner, J. B. M., & El‐Kaderi, H. M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09989 · Cited by 77
Comparative study of the CH4/CO2 adsorption selectivity of activated carbons for biogas upgrading
Peredo-Mancilla, D., Ghimbeu, C. M., Ho, B.-N., Jeguirim, M., Hort, C., & Bessières, D. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103368 · Cited by 77
Small-angle X-ray scattering of nanoporous materials
Welborn, S. S., & Detsi, E. (2019) · Nanoscale Horizons · doi:10.1039/c9nh00347a · Cited by 79
Wang, S., Li, W., Zhang, L., Jin, Z., & Lu, A. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15065h · Cited by 81
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.