Effect of pore size on carbon dioxide sorption by carbide derived carbon
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Items 301–400 of 679
Valorization of waste coffee grounds into microporous carbon materials for CO 2 adsorption
Kim, C., Lee, S., & Park, S. (2023) · Green Chemistry · doi:10.1039/d3gc03557c · Cited by 43
D-glucose-derived S-doped porous carbon: Sustainable and effective CO2 adsorption
Xu, Q., Wang, J., Feng, J., Liu, C., Xiao, Q., Demir, M., Şimşek, U. B., Kılıç, M., Wang, L., & Hu, X. D. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.136054 · Cited by 43
One-step synthesis of K3PO4-activated phosphorus-enriched carbons for enhanced carbon capture
Zhi, Y., Yin, Y., Ciren, Q., Xiao, Q., Zhao, L., Demir, M., Şimşek, U. B., Hu, X. D., & Wang, L. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116694 · Cited by 43
Wickramaratne, N. P., & Jaroniec, M. (2013) · Adsorption · doi:10.1007/s10450-013-9572-x · Cited by 43
“This finding is in an excellent agreement with experimental and computer modeling studies reported by Presser et al. (2011), Hu et al. (2011), Yang and Zhong (2004).”
ResultPreparation of nitrogen doped carbon from tree leaves as efficient CO2 adsorbent
Xu, J., Shi, J., Cui, H., Yan, N., & Liu, Y. (2018) · Chemical Physics Letters · doi:10.1016/j.cplett.2018.09.038 · Cited by 43
Ashourirad, B., Arab, P., Verlander, A., & El‐Kaderi, H. M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00567 · Cited by 42
Liu, J., Liu, X., Sun, Y. M., Sun, C., Liu, H., Stevens, L. A., Li, K., & Snape, C. E. (2017) · Advanced Sustainable Systems · doi:10.1002/adsu.201700115 · Cited by 47
Liu, J., Qi, N., Zhou, B., & Chen, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07015 · Cited by 42
Synthesis of functionalized 3D microporous carbon foams for selective CO2 capture
Liu, X., Wang, S., Sun, C., Liu, H., Stevens, L. A., Dwomoh, P. K., & Snape, C. E. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125459 · Cited by 46
Hao, C., Ren, H., Zhu, H., Chi, Y., Zhao, W. J., Liu, X., & Guo, W. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.120804 · Cited by 42
Balahmar, N., Lowbridge, A. M., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06176a · Cited by 46
Liu, X., Yang, F., Li, M., Wang, S., & Sun, C. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.154894 · Cited by 41
Ma, X., Qi, T., Chen, R., Su, R., Zeng, Z., Li, L., & Wang, S. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.04.156 · Cited by 41
Mochizuki, Y., Bud, J., Byambajav, E., & Tsubouchi, N. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100237 · Cited by 75
Nitrogen doped carbide derived carbon aerogels by chlorine etching of a SiCN aerogel
Zera, E., Nickel, W., Hao, G., Vanzetti, L., Kaskel, S., & Sorarù, G. D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00589f · Cited by 43
Tiwari, V. K., Chen, Z., Gao, F., Gu, Z., Sun, X. A., & Ye, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01114h · Cited by 42
Huang, K., Liu, F., Jiang, L., & Dai, S. (2017) · ChemSusChem · doi:10.1002/cssc.201701666 · Cited by 41
Zheng, S., Zeng, S., Li, G., Yao, X., Li, Z., & Zhang, X. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138736 · Cited by 41
Kim, H. S., Kang, M. S., Lee, S., Lee, Y., & Yoo, W. C. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.06.021 · Cited by 42
Zhu, W., Wang, Y., Yao, F., Wang, X., Zheng, H., Ye, G., Cheng, H., Wu, J., Huang, H., & Ye, D. (2023) · Journal of Environmental Sciences · doi:10.1016/j.jes.2023.02.008 · Cited by 40
Eichler, J. E., Leonard, H., Yang, E. K., Smith, L. A., Lauro, S. N., Burrow, J. N., Ribeiro, R. P. P. L., & Mullins, C. B. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202410171 · Cited by 41
Gas storage scale-up at room temperature on high density carbon materials
Marco-Lozar, J. P., Kunowsky, M., Carruthers, J. D., & Linares-Solano, A. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.058 · Cited by 41
“adsorption capacity (surface area, and micropore volume) or the micropore size distribution) are the main factors responsible for the gas uptake [6,13-14,16,21-24].”
BackgroundCharacterization of porous alkali-activated fly ash composite as a solid absorbent
Chindaprasirt, P., & Rattanasak, U. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.03.011 · Cited by 40
Tailoring Low-Cost Granular Activated Carbons Intended for CO2 Adsorption
Prauchner, M. J., Oliveira, S. D. C., & Rodríguez-Reinoso, F. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.581133 · Cited by 41
“Although there are some scarce works reporting the use of these approaches in the production of ACs intended for CO2 adsorption (Presser et al., 2011; Vargas et al., 2011; Bae and Su, 2013; Ello et al., 2013; Balsamo et al., 2014; Ludwinowicz and Jaroniec, 2015; Munusamy et al., 2015; Ahmed et al.,…”
BackgroundResultInfluentialFacile synthesis of MOF-5-derived porous carbon with adjustable pore size for CO2 capture
Wang, Y., Xu, J., Lin, X., Wang, B., Zhang, Z., Xu, Y., & Suo, Y. (2023) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2023.123984 · Cited by 40
Almanassra, I. W., Al‐Ansari, T. A., Ihsanullah, I., Кочкодан, В., Chatla, A., Atieh, M. A., Shanableh, A., & Laoui, T. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135953 · Cited by 39
Lu, D., Ran, Y., Wang, W., & Huang, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.157043 · Cited by 41
Synthesis of carbon monoliths with a tailored hierarchical pore structure for selective CO2 capture
Zabiegaj, D., Caccia, M., Casco, M. E., Ravera, F., & Narciso, J. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.04.020 · Cited by 39
“[43] nicely described systematically the effect of the pore size on carbon dioxide sorption by carbon materials.”
BackgroundZhang, J., Ma, Y., Wu, W., Cai, Z., Cao, Y., Huang, K., & Jiang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137640 · Cited by 39
Lu, T., Bai, J., Huang, J., Yu, Q., Demir, M., Kılıç, M., Altay, B. N., Wang, L., & Hu, X. D. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c04320 · Cited by 38
Epoxy based oxygen enriched porous carbons for CO 2 capture
Tiwari, D., Bhunia, H., & Bajpai, P. K. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.128 · Cited by 38
Pore Characteristics for Efficient CO2 Storage in Hydrated Carbons
Ren, M., Sevilla, M., Fuertes, A. B., Mokaya, R., Tour, J. M., & Jalilov, A. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17833 · Cited by 38
Liu, B., Ma, X., Wei, D., Yang, Y., Zeng, Z., & Li, L. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.028 · Cited by 38
Lu, T., Ma, C., Demir, M., Yu, Q., Aghamohammadi, P., Wang, L., & Hu, X. D. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.122053 · Cited by 38
Li, J., Kossmann, J., Zeng, K., Zhang, K., Wang, B., Weinberger, C., Antonietti, M., Odziomek, M., & López‐Salas, N. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202217808 · Cited by 40
Characterization and evaluation of low-cost biomass-based-AC for CO2 capture: A review
Khoshraftar, Z., Masoumi, H., & Ghaemi, A. (2023) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2023.100373 · Cited by 41
Mechanisms of pore formation on multi-wall carbon nanotubes by KOH activation
Zhang, X., & Chen, W. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.12.002 · Cited by 38
Perspectives on NMR studies of CO2 adsorption
Bernin, D., & Hedin, N. (2018) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2018.02.003 · Cited by 39
Pei, C., Ben, T., Li, Y., & Qiu, S. (2014) · Chemical Communications · doi:10.1039/c4cc00302k · Cited by 37
Rodríguez-García, S., Santiago, R., López‐Díaz, D., Moreno, M. D. M., Velázquez, M. M., Fierro, J. L. G., & Palomar, J. F. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02035 · Cited by 37
Khosrowshahi, M. S., Mashhadimoslem, H., Emrooz, H. B. M., Ghaemi, A., & Hosseini, M. (2022) · Diamond and Related Materials · doi:10.1016/j.diamond.2022.109204 · Cited by 38
Polyacrylonitrile-Derived N-Doped Nanoporous Carbon Fibers for CO 2 Adsorption
Ma, C., Lu, T., Demir, M., Yu, Q., Hu, X. D., Jiang, W., & Wang, L. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c03126 · Cited by 37
An Atomistic Carbide-Derived Carbon Model Generated Using ReaxFF-Based Quenched Molecular Dynamics
Thompson, M. W., Dyatkin, B., Wang, H.-W., Turner, C. H., Sang, X., Unocic, R. R., Iacovella, C. R., Gogotsi, Y. G., van Duin, A. C. T., & Cummings, P. T. (2017) · C – Journal of Carbon Research · doi:10.3390/c3040032 · Cited by 37
Self-citationShahkarami, S., Dalai, A. K., Soltan, J., Hu, Y., & Wang, D. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00470 · Cited by 35
Chiang, Y., Wu, C.-Y., & Chen, Y.-J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116040 · Cited by 36
Park, J.-H., & Park, S. (2019) · Carbon · doi:10.1016/j.carbon.2019.10.100 · Cited by 36
Hu, B., Cheng, Y., He, X., Wang, Z., Jiang, Z., Yi, M., Li, W., & Wang, L. (2020) · Fuel · doi:10.1016/j.fuel.2020.118770 · Cited by 36
Renewable N-doped microporous carbons from walnut shells for CO 2 capture and conversion
Shao, X., Zhang, Y., Miao, X., Wang, W., Liu, Z., Liu, Q., Zhang, T., Ji, J., & Ji, X. (2021) · Sustainable Energy & Fuels · doi:10.1039/d1se01000j · Cited by 37
An, X., Zhao, K., Pang, W., Zhang, W., Wang, L., Guo, T., & Fu, D. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133877 · Cited by 36
Munusamy, K., Somani, R. S., & Bajaj, H. C. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.05.010 · Cited by 36
Shi, W., Wang, R., Liu, H., Chang, B., Yang, B., & Zhang, Z. (2019) · RSC Advances · doi:10.1039/c9ra03659h · Cited by 39
Microporous novolac-derived carbon beads/sulfur hybrid cathode for lithium-sulfur batteries
Choudhury, S., Krüner, B., Massuti-Ballester, P., Tolosa, A., Prehal, C., Grobelsek, I., Paris, O., Borchardt, L., & Presser, V. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.005 · Cited by 35
Self-citationManmuanpom, N., Thubsuang, U., Dubas, S. T., Wongkasemjit, S., & Chaisuwan, T. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.004 · Cited by 35
Ren, Q., Wei, S., Du, J., & Wu, P. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-27749-w · Cited by 36
Influence of nitrogen moieties on CO2 capture by polyaminal-based porous carbon
Rehman, A., & Park, S. (2017) · Macromolecular Research · doi:10.1007/s13233-017-5138-1 · Cited by 35
The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption
Ullah, S., Shariff, A. M., Bustam, M. A., Elkhalifah, A. E. I., Gonfa, G. H., & Kareem, F. A. A. (2016) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.201600277 · Cited by 34
Hu, X., He, Y., Wang, Z., & Yan, J. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.013 · Cited by 36
Metal-free core-shell structured N-doped carbon/carbon heterojunction for efficient CO2 capture
Cai, R., You, B., Chen, M., & Wu, L. (2019) · Carbon · doi:10.1016/j.carbon.2019.05.001 · Cited by 34
Green and simple approach for low-cost bioproducts preparation and CO2 capture
Durán-Jiménez, G., Kostas, E. T., Stevens, L. A., Meredith, W., Erans, M., Hernández‐Montoya, V., Buttress, A. J., Uguna, C. N., & Binner, E. R. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130512 · Cited by 35
“(Presser et al., 2011) where was found that high surface area (> 2900 m(2) g) with large total pore volume (> 1.”
BackgroundChoma, J., Jedynak, K., Fahrenholz, W., Ludwinowicz, J., & Jaroniec, M. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.051 · Cited by 36
Schneidermann, C., Otto, P., Leistenschneider, D., Grätz, S., Eßbach, C., & Borchardt, L. (2019) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.10.157 · Cited by 32
Sang, Y., Chen, G., & Huang, J. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-2009-9 · Cited by 33
Guo, T., Tian, W., & Wang, Y. (2022) · Atmosphere · doi:10.3390/atmos13071110 · Cited by 32
Chiang, Y., & Chin, W.-T. (2022) · Nanomaterials · doi:10.3390/nano12091492 · Cited by 32
Functional Activated Biocarbons Based on Biomass Waste for CO 2 Capture and Heavy Metal Sorption
Serafin, J., Kishibayev, K., Tokpayev, R., Khavaza, T., Atchabarova, А., Ibraimov, Z., Nauryzbayev, M., Sreńscek-Nazzal, J., Giraldo, L., & Moreno‐Piraján, J. C. (2023) · ACS Omega · doi:10.1021/acsomega.3c07120 · Cited by 36
Chen, D., Gu, S., Fu, Y., Fu, X., Zhang, Y., Yu, G., & Pan, C. (2017) · New Journal of Chemistry · doi:10.1039/c7nj00919d · Cited by 32
Huang, K., Li, Z.-L., Zhang, J., Tao, D., Liu, F., & Dai, S. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.07.012 · Cited by 32
Cao, X., Wang, R., Peng, Q., Zhao, H., Fan, H., Liu, H., & Liu, Q. (2021) · Polymer · doi:10.1016/j.polymer.2021.124192 · Cited by 32
Zhou, J. P., Li, Z., Xing, W., Zhu, T., Shen, H., & Zhuo, S. (2015) · Chemical Communications · doi:10.1039/c4cc10364e · Cited by 34
Deng, S., Chen, T., Zhao, T., Yao, X., Wang, B., Huang, J. G., Wang, Y., & Yu, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.10.061 · Cited by 34
Porous Carbons for Carbon Dioxide Capture
Lu, A., Hao, G., & Zhang, X.-Q. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54646-4_2 · Cited by 36
“They found that the average pore size and the total pore volume are not adequate measures to predict the CO2 uptake of microporous carbon sorbents, the pore volume of micropores strongly governs the amount of adsorbed CO2 [161].”
BackgroundMethodInfluentialAlmanassra, I. W., Кочкодан, В., McKay, G., Atieh, M. A., & Al‐Ansari, T. A. (2021) · Journal of Environmental Science and Health Part A · doi:10.1080/10934529.2021.1973822 · Cited by 31
“As such, CDC has been investigated for the removal of pharmaceuticals,([39,40]) phosphate,([41]) tetraethylammonium tetrafluoroborate electrolytes,([42]) carbon dioxide,([43]) acetaldehyde([44]) and cytokines.”
BackgroundLi, H., Guo, H. M., Tong, S., Huang, K., Zhang, C., Wang, X., Zhang, D., Chen, X., & Yang, J. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aafbf3 · Cited by 31
Computational Design of a Photoresponsive Metal–Organic Framework for Post Combustion Carbon Capture
Park, J., Suh, B. L., & Kim, J. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c01878 · Cited by 31
Ghosh, S., & Barron, A. R. (2017) · Sustainable Energy & Fuels · doi:10.1039/c6se00102e · Cited by 34
Carbon Spheres as CO2 Sorbents
Staciwa, P., Narkiewicz, U., Sibera, D., Moszyński, D., Wróbel, R. J., & Cormia, R. D. (2019) · Applied Sciences · doi:10.3390/app9163349 · Cited by 30
“Presser and coworkers [45] claimed that under atmospheric pressure, the contribution of the pores below 0.”
BackgroundLebedev, A. N., Rodygin, K. S., Mironenko, R. M., Saybulina, E. R., & Ananikov, V. P. (2022) · Journal of Catalysis · doi:10.1016/j.jcat.2022.01.034 · Cited by 30
Toward sustainable hydrogen storage and carbon dioxide capture in post-combustion conditions
Moussa, M., Bader, N., Querejeta, N., Durán, I., Pevida, C., & Ouederni, A. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.03.003 · Cited by 30
Apaydın, D. H., Góra, M., Portenkirchner, E., Oppelt, K., Neugebauer, H., Jakešová, M., Głowacki, E. D., Kunze‐Liebhäuser, J., Zagórska, M., Mieczkowski, J. B., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01875 · Cited by 30
Unveiling anomalous CO 2 -to-N 2 selectivity of graphene oxide
Lee, J. H., Lee, H. J., & Choi, J. W. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp04318j · Cited by 30
Nitrogen doped porous carbon derived from EDTA: Effect of pores on hydrogen storage properties
Das, T. K., Banerjee, S., Sharma, P., Sudarsan, V., & Sastry, P. U. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.03.081 · Cited by 30
Sorbenten zur direkten Gewinnung von CO2 aus der Umgebungsluft
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie · doi:10.1002/ange.201906756 · Cited by 31
Burrow, J. N., Pender, J. P., Guerrera, J. V., Wygant, B. R., Eichler, J. E., Calabro, D. C., & Mullins, C. B. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01112 · Cited by 33
López‐Salas, N., Jardim, E. D. O., Silvestre‐Albero, A., Gutiérrez, M. C., Ferrer, M. L., Rodríguez-Reinoso, F., Silvestre‐Albero, J., & del Monte, F. (2014) · Langmuir · doi:10.1021/la5034146 · Cited by 32
Polyacrylonitrile‐Derived Sponge‐Like Micro/Macroporous Carbon for Selective CO2 Separation
Guo, L., Hu, Q., Zhang, P., Li, W., & Lu, A. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201800631 · Cited by 30
Li, M., Liu, X., Sun, C., Stevens, L. A., & Liu, H. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.107471 · Cited by 42
Preparation and characterisation of carbon spheres for carbon dioxide capture
Sibera, D., Narkiewicz, U., Kapica, J., Serafin, J., Michalkiewicz, B., Wróbel, R. J., & Morawski, A. W. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0601-8 · Cited by 29
Islam, M. A., Tan, Y. L., Islam, M. A., Romić, M., & Hameed, B. H. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.06.021 · Cited by 29
Wu, Y., Chen, Z., Liu, Y., Xu, Y., & Liu, Z. (2018) · Fuel · doi:10.1016/j.fuel.2018.06.094 · Cited by 29
Cai, W., Ding, J., He, Y., Chen, X., Yuan, D., Chen, C., Cheng, L., Du, W., Wan, H. L., & Guan, G. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00294 · Cited by 31
Liu, Z., Yang, Y., Du, Z., Xing, W., Komarneni, S., Zhang, Z., Gao, X., & Yan, Z. (2015) · Nanoscale Research Letters · doi:10.1186/s11671-015-1041-x · Cited by 28
“[19] studied the CO2 uptake on microporous carbon in relation to the pore size and found that the micropores smaller than 1 nm are responsible for high CO2 adsorption at 1 bar.”
BackgroundKhodabakhshi, S., Kiani, S., Niu, Y., White, A. O., Suwaileh, W. A., Palmer, R. E., Barron, A. R., & Andreoli, E. (2020) · Carbon · doi:10.1016/j.carbon.2020.08.056 · Cited by 28
N, S, O co-doped porous carbons derived from bio-based polybenzoxazine for efficient CO2 capture
Guo, Z., Lü, X., & Zhong, X. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.128845 · Cited by 28
Enhancing Iodine Capture of Porous Organic Cages through N-Heteroatom Engineering
Zou, D., Dong, X., Tong, T., Gao, W., He, S., Li, Z., Yang, L., & Cao, X. (2024) · Langmuir · doi:10.1021/acs.langmuir.3c03944 · Cited by 28
Almasoudi, A., & Mokaya, R. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.04.044 · Cited by 29
Slow diffusion of methane in ultra-micropores of silicon carbide-derived carbon
Shahtalebi, A., Farmahini, A. H., Shukla, P. R., & Bhatia, S. K. (2014) · Carbon · doi:10.1016/j.carbon.2014.05.061 · Cited by 28
“[64] have also presented a study on the effect of CDC micropore size on low pressure CO2 sorption.”
BackgroundZbair, M., Limousy, L., Drané, M., Richard, C., Juge, M., Aemig, Q., Trably, É., Escudié, R., Peyrelasse, C., & Bennici, S. M. (2024) · Materials · doi:10.3390/ma17143527 · Cited by 30
“The authors noticed the significance of a greater SSA [265], and a suitable pore size (0.5–0.8 nm) [266], along with Van der Waals and electrostatic interactions.”
BackgroundInfluentialSteam activation of pitch-based carbon fibers for increasing CO 2 adsorption behaviors
Kim, C., Kim, M., Lee, J.-I., Choi, H., Lee, S., & Park, S. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta00486a · Cited by 29
Facile synthesis of nitrogen-doped porous carbons for CO2 capture and supercapacitors
Wei, H., Qian, W., Fu, N., Chen, H., Liu, J., Jiang, X., Lan, G., Lin, H., & Han, S. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1087-5 · Cited by 27
Krüner, B., Odenwald, C., Quade, A., Kickelbick, G., & Presser, V. (2018) · Batteries & Supercaps · doi:10.1002/batt.201800051 · Cited by 27
Self-citation
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.