The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Abstract
Energy production and storage have become key issues concerning our welfare in daily life. Present challenges for batteries are twofold. In the first place, the increasing demand for powering systems of portable electronic devices and zero-emission vehicles stimulates research towards high energy and high voltage systems. In the second place, low cost batteries are required in order to advance towards smart electric grids that integrate discontinuous energy flow from renewable sources, optimizing the performance of clean energy sources. Na-ion batteries can be the key for the second point, because of the huge availability of sodium, its low price and the similarity of both Li and Na insertion chemistries. In spite of the lower energy density and voltage of Na-ion based technologies, they can be focused on applications where the weight and footprint requirement is less drastic, such as electrical grid storage. Much work has to be done in the field of Na-ion in order to catch up with Li-ion technology. Cathodic and anodic materials must be optimized, and new electrolytes will be the key point for Na-ion success. This review will gather the up-to-date knowledge about Na-ion battery materials, with the aim of providing a wide view of the systems that have already been explored and a starting point for the new research on this battery technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Mechanisms for Lithium Insertion in Carbonaceous Materials
Dahn, J. R., Zheng, T., Liu, Y., & Xue, J. S. (1995) · Science · doi:10.1126/science.270.5236.590 · Cited by 2,123
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Electrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
Ceramic and polymeric solid electrolytes for lithium-ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.01.076 · Cited by 1,172
Cited by
Items 201–249 of 249
Probing the Failure Mechanism of SnO2 Nanowires for Sodium-Ion Batteries
Gu, M., Kushima, A., Shao, Y., Zhang, J.-G., Liu, J., Browning, N. D., Li, J., & Wang, C. (2013) · Nano Letters · doi:10.1021/nl402633n · Cited by 296
Wang, X., Fan, L., Gong, D., Zhu, J., Zhang, Q., & Lu, B. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504589 · Cited by 295
Goktas, M., Bolli, C., Berg, E. J., Novák, P., Pollok, K., Langenhorst, F., Roeder, M. V., Lenchuk, O., Mollenhauer, D., & Adelhelm, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702724 · Cited by 293
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
Hu, X., Sun, X., Yoo, S. J., Evanko, B., Fan, F., Cai, S., Zheng, C., Hu, W., & Stucky, G. D. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.081 · Cited by 292
Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries
Massé, R. C., Uchaker, E., & Cao, G. (2015) · Science China Materials · doi:10.1007/s40843-015-0084-8 · Cited by 292
Li, H., Yu, X., Bai, Y., Wu, F., Wu, C., Liu, L.-Y., & Yang, X.-Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00277j · Cited by 291
Bianchini, M., Fauth, F., Brisset, N., Weill, F., Suard, E., Masquelier, C., & Croguennec, L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00361 · Cited by 291
Nanostructured metal phosphide-based materials for electrochemical energy storage
Wang, X., Kim, H.-M., Xiao, Y., & Sun, Y.-K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06705k · Cited by 290
Commercialisation of high energy density sodium-ion batteries: Faradion's journey and outlook
Rudola, A., Rennie, A. J. R., Heap, R., Meysami, S. S., Lowbridge, A., Mazzali, F., Sayers, R., Wright, C. J., & Barker, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00376c · Cited by 289
Faradaic Electrodes Open a New Era for Capacitive Deionization
Li, Q., Zheng, Y., Xiao, D., Or, T., Gao, R., Li, Z., Feng, M., Shui, L., Zhou, G., Wang, X., et al. (2020) · Advanced Science · doi:10.1002/advs.202002213 · Cited by 288
First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)3
Song, W., Ji, X., Wu, Z., Zhu, Y., Yang, Y., Chen, J., Jing, M., Li, F., & Banks, C. E. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00230j · Cited by 285
Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401377 · Cited by 285
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
Progress in 3D-MXene Electrodes for Lithium/Sodium/Potassium/Magnesium/Zinc/Aluminum-Ion Batteries
Bashir, T., Zhou, S., Yang, S., Ismail, S. A., Ali, T., Wang, H., Zhao, J., & Gao, L. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00174-2 · Cited by 284
Na-ion mobility in layered Na2FePO4F and olivine Na[Fe,Mn]PO4
Tripathi, R., Wood, S. M., Islam, M. S., & Nazar, L. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40914g · Cited by 282
Gschwind, F., Rodriguez-Garcia, G., Sandbeck, D. J. S., Gross, A., Weil, M., Fichtner, M., & Hörmann, N. (2016) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2015.12.002 · Cited by 281
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Shao, Y., Xiao, J., Wang, W., Engelhard, M., Chen, X., Nie, Z., Gu, M., Saraf, L. V., Exarhos, G., Zhang, J.-G., et al. (2013) · Nano Letters · doi:10.1021/nl401995a · Cited by 280
Defective Hard Carbon Anode for Na-Ion Batteries
Li, Z., Chen, Y., Jian, Z., Jiang, H., Razink, J. J., Stickle, W. F., Neuefeind, J. C., & Ji, X. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00645 · Cited by 280
Transition metal chalcogenide anodes for sodium storage
Ali, Z., Zhang, T., Asif, M., Zhao, L., Yu, Y., & Hou, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.008 · Cited by 280
Graphene-supported Na3V2(PO4)3 as a high rate cathode material for sodium-ion batteries
Jung, Y. H., Lim, C. H., & Kim, D. K. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12116j · Cited by 279
Bhide, A., Hofmann, J., Katharina Dürr, A., Janek, J., & Adelhelm, P. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp53077a · Cited by 275
Ren, W., Zheng, Z., Xu, C., Niu, C., Wei, Q., An, Q., Zhao, K., Yan, M., Qin, M., & Mai, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.018 · Cited by 275
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Lee, J., Lee, Y., Lee, J., Lee, S.-M., Choi, J.-H., Kim, H., Kwon, M.-S., Kang, K., Lee, K. T., & Choi, N.-S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14878 · Cited by 273
Kravchyk, K. V., Bhauriyal, P., Piveteau, L., Guntlin, C. P., Pathak, B., & Kovalenko, M. V. (2018) · Nature Communications · doi:10.1038/s41467-018-06923-6 · Cited by 273
Porous CuO nanowires as the anode of rechargeable Na-ion batteries
Wang, L., Zhang, K., Hu, Z., Duan, W., Cheng, F., & Chen, J. (2014) · Nano Research · doi:10.1007/s12274-013-0387-6 · Cited by 272
Electrochemically Expandable Soft Carbon as Anodes for Na-Ion Batteries
Luo, W., Jian, Z., Xing, Z., Wang, W., Bommier, C., Lerner, M. M., & Ji, X. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00329 · Cited by 270
Li, H., Peng, L., Zhu, Y., Chen, D., Zhang, X., & Yu, G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00794e · Cited by 270
Recent developments in electrode materials for potassium-ion batteries
Xu, Y.-S., Duan, S.-Y., Sun, Y.-G., Bin, D.-S., Tao, X.-S., Zhang, D., Liu, Y., Cao, A.-M., & Wan, L.-J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10953b · Cited by 269
Tang, Y., Zhao, Z., Hao, X., Wang, Y., Liu, Y., Hou, Y., Yang, Q., Wang, X., & Qiu, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02665j · Cited by 268
High capacity potassium-ion battery anodes based on black phosphorus
Sultana, I., Rahman, M. M., Ramireddy, T., Chen, Y., & Glushenkov, A. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02483e · Cited by 267
A Novel Tin‐Graphite Dual‐Ion Battery Based on Sodium‐Ion Electrolyte with High Energy Density
Sheng, M., Zhang, F., Ji, B., Tong, X., & Tang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601963 · Cited by 266
Apple‐Biowaste‐Derived Hard Carbon as a Powerful Anode Material for Na‐Ion Batteries
Wu, L., Buchholz, D., Vaalma, C., Giffin, G. A., & Passerini, S. (2016) · ChemElectroChem · doi:10.1002/celc.201500437 · Cited by 264
Liu, Y., Kang, H., Jiao, L., Chen, C., Cao, K., Wang, Y., & Yuan, H. (2015) · Nanoscale · doi:10.1039/c4nr05106h · Cited by 264
Recent progress in rational design of anode materials for high-performance Na-ion batteries
Cui, J., Yao, S., & Kim, J.-K. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.12.005 · Cited by 261
Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries
Wang, K., Jin, Y., Sun, S., Huang, Y., Peng, J., Luo, J., Zhang, Q., Qiu, Y., Fang, C., & Han, J. (2017) · ACS Omega · doi:10.1021/acsomega.7b00259 · Cited by 260
Micro/Nanostructured Materials for Sodium Ion Batteries and Capacitors
Li, F., & Zhou, Z. (2018) · Small · doi:10.1002/smll.201702961 · Cited by 259
A High-Voltage Aqueous Electrolyte for Sodium-Ion Batteries
Kühnel, R.-S., Reber, D., & Battaglia, C. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00623 · Cited by 257
Cobalt oxide-based nanoarchitectures for electrochemical energy applications
Mei, J., Liao, T., Ayoko, G. A., Bell, J., & Sun, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.001 · Cited by 256
Su, D., Ahn, H.-J., & Wang, G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00031a · Cited by 255
Trends in Aluminium‐Based Intercalation Batteries
Ambroz, F., Macdonald, T. J., & Nann, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602093 · Cited by 253
Low-Potential Sodium Insertion in a NASICON-Type Structure through the Ti(III)/Ti(II) Redox Couple
Senguttuvan, P., Rousse, G., Arroyo y de Dompablo, M. E., Vezin, H., Tarascon, J.-M., & Palacín, M. R. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311044t · Cited by 252
Graphene oxide: An emerging electromaterial for energy storage and conversion
Tian, Y., Yu, Z., Cao, L., Zhang, X. L., Sun, C., & Wang, D.-W. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.07.006 · Cited by 240
Zhang, J., Kang, W., Jiang, M., You, Y., Cao, Y., Ng, T.-W., Yu, D. Y. W., Lee, C.-S., & Xu, J. (2017) · Nanoscale · doi:10.1039/c6nr09166k · Cited by 127
A Na3V2(PO4)3 cathode material for use in hybrid lithium ion batteries
Song, W., Ji, X., Pan, C., Zhu, Y., Chen, Q., & Banks, C. E. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52308j · Cited by 126
Tahmasebi, M. H., Kramer, D., Mönig, R., & Boles, S. T. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0011903jes · Cited by 59
Na3V2(PO4)3/C Composite Prepared by Sol-Gel Method as Cathode for Sodium Ion Batteries
Luo, S.-H., Li, J.-Y., Bao, S., Liu, Y.-Y., & Wang, Z. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0961807jes · Cited by 37
Chekannikov, A., Kapaev, R., Novikova, S., Tabachkova, N., Kulova, T., Skundin, A., & Yaroslavtsev, A. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3524-4 · Cited by 23
Metadata
- Authors
- Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 3
- Pages
- 5884
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2021403769
- Cited by
- 3,564
- References
- 47
- FWCI
- 138.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.