The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Phase stability, electrochemical stability and ionic conductivity of the Li10±1MP2X12(M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors
Abstract
We present an investigation of the phase stability, electrochemical stability and Li+ conductivity of the Li10±1MP2X12 (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors using first principles calculations. The Li10GeP2S12 (LGPS) superionic conductor has the highest Li+ conductivity reported to date, with excellent electrochemical performance demonstrated in a Li-ion rechargeable battery. Our results show that isovalent cation substitutions of Ge4+ have a small effect on the relevant intrinsic properties, with Li10SiP2S12 and Li10SnP2S12 having similar phase stability, electrochemical stability and Li+ conductivity as LGPS. Aliovalent cation substitutions (M = Al or P) with compensating changes in the Li+ concentration also have a small effect on the Li+ conductivity in this structure. Anion substitutions, however, have a much larger effect on these properties. The oxygen-substituted Li10MP2O12 compounds are predicted not to be stable (with equilibrium decomposition energies >90 meV per atom) and have much lower Li+ conductivities than their sulfide counterparts. The selenium-substituted Li10MP2Se12 compounds, on the other hand, show a marginal improvement in conductivity, but at the expense of reduced electrochemical stability. We also studied the effect of lattice parameter changes on the Li+ conductivity and found the same asymmetry in behavior between increases and decreases in the lattice parameters, i.e., decreases in the lattice parameters lower the Li+ conductivity significantly, while increases in the lattice parameters increase the Li+ conductivity only marginally. Based on these results, we conclude that the size of the S2− is near optimal for Li+ conduction in this structural framework.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Canonical dynamics: Equilibrium phase-space distributions
Hoover, W. G. (1985) · Physical Review A · doi:10.1103/physreva.31.1695 · Cited by 23,465
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
A unified formulation of the constant temperature molecular dynamics methods
Nosé, S. (1984) · The Journal of Chemical Physics · doi:10.1063/1.447334 · Cited by 19,152
Rationale for mixing exact exchange with density functional approximations
Perdew, J. P., Ernzerhof, M., & Burke, K. (1996) · The Journal of Chemical Physics · doi:10.1063/1.472933 · Cited by 6,629
Die Berechnung optischer und elektrostatischer Gitterpotentiale
Ewald, P. P. (1921) · Annalen der Physik · doi:10.1002/andp.19213690304 · Cited by 6,013
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2204597 · Cited by 5,288
Cited by
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
Self-citationBachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Self-citationInterface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Self-citationScaling deep learning for materials discovery
Merchant, A., Batzner, S., Schoenholz, S. S., Aykol, M., Cheon, G., & Cubuk, E. D. (2023) · Nature · doi:10.1038/s41586-023-06735-9 · Cited by 1,527
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Self-citationReview on solid electrolytes for all-solid-state lithium-ion batteries
Zheng, F., Kotobuki, M., Song, S., Lai, M. O., & Lu, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.022 · Cited by 1,397
New horizons for inorganic solid state ion conductors
Zhang, Z., Shao, Y., Lotsch, B., Hu, Y.-S., Li, H., Janek, J., Nazar, L. F., Nan, C.-W., Maier, J., Armand, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01053f · Cited by 1,321
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Self-citationElectrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes
Han, F., Zhu, Y., He, X., Mo, Y., & Wang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501590 · Cited by 1,095
Self-citationLi, M., Wang, C., Chen, Z., Xu, K., & Lu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00531 · Cited by 944
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Computational predictions of energy materials using density functional theory
Jain, A., Shin, Y., & Persson, K. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.4 · Cited by 919
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Kim, K. J., Balaish, M., Wadaguchi, M., Kong, L., & Rupp, J. L. M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002689 · Cited by 806
Zhang, Q., Cao, D., Ma, Y., Natan, A., Aurora, P., & Zhu, H. (2019) · Advanced Materials · doi:10.1002/adma.201901131 · Cited by 709
Chen, S., Xie, D., Liu, G., Mwizerwa, J. P., Zhang, Q., Zhao, Y., Xu, X., & Yao, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.020 · Cited by 696
Sulfide Solid Electrolytes for Lithium Battery Applications
Lau, J., DeBlock, R. H., Butts, D. M., Ashby, D. S., Choi, C. S., & Dunn, B. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800933 · Cited by 678
Li10SnP2S12: An Affordable Lithium Superionic Conductor
Bron, P., Johansson, S., Zick, K., Schmedt auf der Günne, J., Dehnen, S., & Roling, B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407393y · Cited by 655
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Recent advances of thermal safety of lithium ion battery for energy storage
Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.042 · Cited by 624
A Critical Review of Machine Learning of Energy Materials
Chen, C., Zuo, Y., Ye, W., Li, X., Deng, Z., & Ong, S. P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903242 · Cited by 609
Self-citationWenzel, S., Sedlmaier, S. J., Dietrich, C., Zeier, W. G., & Janek, J. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2017.07.005 · Cited by 609
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Self-citationNew frontiers for the materials genome initiative
de Pablo, J. J., Jackson, N. E., Webb, M. A., Chen, L.-Q., Moore, J. E., Morgan, D., Jacobs, R., Pollock, T., Schlom, D. G., Toberer, E. S., et al. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0173-4 · Cited by 562
Self-citationCheng, L., Crumlin, E. J., Chen, W., Qiao, R., Hou, H., Franz Lux, S., Zorba, V., Russo, R., Kostecki, R., Liu, Z., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02921f · Cited by 545
Yang, X., Luo, J., & Sun, X. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00635d · Cited by 520
Statistical variances of diffusional properties from ab initio molecular dynamics simulations
He, X., Zhu, Y., Epstein, A., & Mo, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0074-y · Cited by 496
Self-citationWang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Mechanisms and properties of ion-transport in inorganic solid electrolytes
Zhang, B., Tan, R., Yang, L., Zheng, J., Zhang, K., Mo, S., Lin, Z., & Pan, F. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.015 · Cited by 464
Solid-State Electrolytes for Lithium-Ion Batteries: Fundamentals, Challenges and Perspectives
Zhao, W., Yi, J., He, P., & Zhou, H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00048-0 · Cited by 464
Computational Screening of Cathode Coatings for Solid-State Batteries
Xiao, Y., Miara, L. J., Wang, Y., & Ceder, G. (2019) · Joule · doi:10.1016/j.joule.2019.02.006 · Cited by 451
Self-citationLewis, J. A., Cortes, F. J. Q., Liu, Y., Miers, J. C., Verma, A., Vishnugopi, B. S., Tippens, J., Prakash, D., Marchese, T. S., Han, S. Y., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00903-2 · Cited by 444
Self-citationElastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
Self-citationComputation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Self-citationCompatibility issues between electrodes and electrolytes in solid-state batteries
Tian, Y., Shi, T., Richards, W. D., Li, J., Kim, J. C., Bo, S.-H., & Ceder, G. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00534b · Cited by 396
Self-citationFast Charging Lithium Batteries: Recent Progress and Future Prospects
Zhu, G., Zhao, C., Huang, J., He, C., Zhang, J., Chen, S., Xu, L., Yuan, H., & Zhang, Q. (2019) · Small · doi:10.1002/smll.201805389 · Cited by 395
All-Solid-State Lithium Batteries with Sulfide Electrolytes and Oxide Cathodes
Wu, J., Shen, L., Zhang, Z., Liu, G., Wang, Z., Zhou, D., Wan, H., Xu, X., & Yao, X. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00081-4 · Cited by 373
Schlem, R., Muy, S., Prinz, N., Banik, A., Shao‐Horn, Y., Zobel, M., & Zeier, W. G. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903719 · Cited by 362
Cheng, Q., Li, A., Li, N., Li, S., Zangiabadi, A., Li, T.-D., Huang, W., Li, A. C., Jin, T., Song, Q., et al. (2019) · Joule · doi:10.1016/j.joule.2019.03.022 · Cited by 350
Fan, X., Zhong, C., Liu, J., Ding, J., Deng, Y., Han, X., Zhang, L., Hu, W., Wilkinson, D. P., & Zhang, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00196 · Cited by 347
Nikodimos, Y., Huang, C.-J., Taklu, B. W., Su, W.-N., & Hwang, B. J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03032a · Cited by 345
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Data-Driven First-Principles Methods for the Study and Design of Alkali Superionic Conductors
Deng, Z., Zhu, Z., Chu, I.-H., & Ong, S. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02648 · Cited by 321
Self-citationKuhn, A., Gerbig, O., Zhu, C., Falkenberg, F., Maier, J., & Lotsch, B. V. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02046d · Cited by 316
Green, M. L., Choi, C. L., Hattrick-Simpers, J. R., Joshi, A. M., Takeuchi, I., Barron, S. C., Campo, E., Chiang, T., Empedocles, S., Gregoire, J. M., et al. (2017) · Applied Physics Reviews · doi:10.1063/1.4977487 · Cited by 315
Rechargeable Solid‐State Li–Air and Li–S Batteries: Materials, Construction, and Challenges
Liu, Y., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701602 · Cited by 315
Design and synthesis of the superionic conductor Na10SnP2S12
Richards, W. D., Tsujimura, T., Miara, L. J., Wang, Y., Kim, J. C., Ong, S. P., Uechi, I., Suzuki, N., & Ceder, G. (2016) · Nature Communications · doi:10.1038/ncomms11009 · Cited by 312
Self-citationBoosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
A review of challenges and issues concerning interfaces for all-solid-state batteries
Lim, H.-D., Park, J.-H., Shin, H.-J., Jeong, J., Kim, J. T., Nam, K.-W., Jung, H.-G., & Chung, K. Y. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.011 · Cited by 302
Chu, I.-H., Kompella, C. S., Nguyen, H., Zhu, Z., Hy, S., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · Scientific Reports · doi:10.1038/srep33733 · Cited by 290
Self-citationWu, E. A., Banerjee, S., Tang, H., Richardson, P. M., Doux, J.-M., Qi, J., Zhu, Z., Grenier, A., Li, Y., Zhao, E., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21488-7 · Cited by 288
Self-citationAntiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Xu, G., Amine, R., Abouimrane, A., Che, H., Dahbi, M., Ma, Z., Saadoune, I., Alami, J., Mattis, W. L., Pan, F., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702403 · Cited by 287
Tetragonal Li10GeP2S12 and Li7GePS8 – exploring the Li ion dynamics in LGPS Li electrolytes
Kuhn, A., Duppel, V., & Lotsch, B. V. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41728j · Cited by 284
Gao, Y., Nolan, A. M., Du, P., Wu, Y., Yang, C., Chen, Q., Mo, Y., & Bo, S.-H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00747 · Cited by 280
Self-citationWenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Cheng, L., Wu, C. H., Jarry, A., Chen, W., Ye, Y., Zhu, J., Kostecki, R., Persson, K., Guo, J., Salmeron, M., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02528 · Cited by 269
de Klerk, N. J. J., van der Maas, E., & Wagemaker, M. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00457 · Cited by 269
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Self-citationZhu, Z., Chu, I.-H., Deng, Z., & Ong, S. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03656 · Cited by 258
Self-citationChemo-Mechanical Challenges in Solid-State Batteries
Lewis, J. A., Tippens, J., Cortes, F. J. Q., & McDowell, M. T. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.06.013 · Cited by 257
Fujimura, K., Seko, A., Koyama, Y., Kuwabara, A., Kishida, I., Shitara, K., Fisher, C. A. J., Moriwake, H., & Tanaka, I. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300060 · Cited by 244
Lithium superionic conductors with corner-sharing frameworks
Jun, K., Sun, Y., Xiao, Y., Zeng, Y., Kim, R., Kim, H., Miara, L. J., Im, D., Wang, Y., & Ceder, G. (2022) · Nature Materials · doi:10.1038/s41563-022-01222-4 · Cited by 236
Self-citation
Metadata
- Authors
- Ong, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 1
- Pages
- 148-156
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2096694960
- Cited by
- 710
- References
- 31
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.