The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Bio-ink properties and printability for extrusion printing living cells
Open accessAbstract
Additive biofabrication (3D bioprinting) makes it possible to create scaffolds with precise geometries, control over pore interconnectivity and architectures that are not possible with conventional techniques. Inclusion of cells within the ink to form a "bio-ink" presents the potential to print 3D structures that can be implanted into damaged/diseased tissue to promote highly controlled cell-based regeneration and repair. The properties of an 'ink' are defined by its formulation and critically influence the delivery and integrity of structure formed. Importantly, the ink properties need to conform to biological requirements necessary for the cell system that they are intended to support and it is often challenging to find conditions for printing that facilitate this critical aspect of tissue bioengineering. In this study, alginate (Alg) was selected as the major component of the 'bio-ink' formulations for extrusion printing of cells. The rheological properties of alginate-gelatin (Alg-Gel) blends were compared with pre-crosslinked alginate and alginate solution to establish their printability whilst maintaining their ability to support optimal cell growth. Pre-crosslinked alginate on its own was liquid-like during printing. However, by controlling the temperature, Alg-Gel formulations had higher viscosity, storage modulus and consistency which facilitated higher print resolution/precision. Compression and indentation testing were used to examine the mechanical properties of alginate compared to Alg-Gel. Both types of gels yielded similar results with modulus increasing with alginate concentration. Decay in mechanical properties over time suggests that Alg-Gel slowly degrades in cell culture media with more than 60% decrease in initial modulus over 7 days. The viability of primary myoblasts delivered as a myoblast/Alg-Gel bio-ink was not affected by the printing process, indicating that the Alg-Gel matrix provides a potential means to print 3D constructs that may find application in myoregenerative applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Hydrogels for Tissue Engineering
Lee, K. Y., & Mooney, D. J. (2001) · Chemical Reviews · doi:10.1021/cr000108x · Cited by 5,277
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Molecular and Cellular Endocrinology
Rainey, W., & Rodgers, R. (2004) · Molecular and Cellular Endocrinology · doi:10.1016/j.mce.2004.10.007 · Cited by 1,307
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Evaluation of an in situ forming hydrogel wound dressing based on oxidized alginate and gelatin
Balakrishnan, B., Mohanty, M., Umashankar, P. R., & Jayakrishnan, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.012 · Cited by 959
Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues
McKee, C. T., Last, J. A., Russell, P., & Murphy, C. J. (2011) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2010.0520 · Cited by 708
Banerjee, A., Arha, M., Choudhary, S., Ashton, R. S., Bhatia, S. R., Schaffer, D. V., & Kane, R. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.05.050 · Cited by 673
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Gelation of aqueous gelatin solutions. I. Structural investigation
Djabourov, M., Leblond, J., & Papon, P. (1988) · Journal de Physique · doi:10.1051/jphys:01988004902031900 · Cited by 410
Choi, Y. S., Hong, S. R., Lee, Y. M., Song, K. W., Park, M. H., & Nam, Y. S. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00180-x · Cited by 401
Alginate/gelatin blend films and their properties for drug controlled release
Dong, Z., Wang, Q., & Du, Y. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.01.002 · Cited by 393
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Designing alginate hydrogels to maintain viability of immobilized cells
Kong, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00295-3 · Cited by 375
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
The effect of matrix characteristics on fibroblast proliferation in 3D gels
Bott, K., Upton, Z., Schrobback, K., Ehrbar, M., Hubbell, J. A., Lutolf, M. P., & Rizzi, S. C. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.046 · Cited by 334
Kraehenbuehl, T. P., Zammaretti, P., Van der Vlies, A. J., Schoenmakers, R. G., Lutolf, M. P., Jaconi, M. E., & Hubbell, J. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.016 · Cited by 299
Stability of hydrogels used in cell encapsulation: An in vitro comparison of alginate and agarose
Shoichet, M. S., Li, R. H., White, M. L., & Winn, S. R. (1996) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19960520)50:4<374::aid-bit4>3.0.co;2-i · Cited by 296
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Kuo, C. K., & Ma, P. X. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31375 · Cited by 228
Inhibition of in vitro chondrogenesis in RGD-modified three-dimensional alginate gels
Connelly, J. T., García, A. J., & Levenston, M. E. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.006 · Cited by 222
Preparation and characterization of alginate/gelatin blend films for cardiac tissue engineering
Rosellini, E., Cristallini, C., Barbani, N., Vozzi, G., & Giusti, P. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32216 · Cited by 196
Peptide‐modified alginate surfaces as a growth permissive substrate for neurite outgrowth
Dhoot, N. O., Tobias, C. A., Fischer, I., & Wheatley, M. A. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30103 · Cited by 186
Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology
Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 180
Direct Construction of a Three-dimensional Structure with Cells and Hydrogel
Yan, Y., Wang, X., Xiong, Z., Liu, H., Liu, F., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911505053658 · Cited by 155
Influence of Calcium Ions on Cell Survival and Proliferation in the Context of an Alginate Hydrogel
Cao, T. N., Chen, D., & Schreyer, D. J. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/516461 · Cited by 148
Fabrication and optimization of alginate hydrogel constructs for use in 3D neural cell culture
Frampton, J. P., Hynd, M. R., Shuler, M. L., & Shain, W. G. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/1/015002 · Cited by 142
Encapsulation of fibroblasts causes accelerated alginate hydrogel degradation
Hunt, N. C., Smith, A. M., Gbureck, U., Shelton, R. M., & Grover, L. M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.03.026 · Cited by 137
Preparation and characterization of alginate/gelatin blend fibers
Fan, L., Du, Y., Huang, R., Wang, Q., Wang, X., & Zhang, L. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21610 · Cited by 127
Recent advances and perspectives on coated alginate microspheres for modified drug delivery
Matricardi, P., Meo, C. D., Coviello, T., & Alhaique, F. (2008) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.5.4.417 · Cited by 116
Physical gelation under shear for gelatin gels
Carvalho, W., & Djabourov, M. (1997) · Rheologica Acta · doi:10.1007/bf00367355 · Cited by 110
The pro-angiogenic characteristics of a cross-linked gelatin matrix
Dreesmann, L., Ahlers, M. J., & Schlosshauer, B. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.040 · Cited by 104
Kapsa, R. M. I., Quigley, A. F., Lynch, G. S., Steeper, K. R., Kornberg, A. J., Gregorevic, P., Austin, L., & Byrne, E. (2001) · Human Gene Therapy · doi:10.1089/104303401300057324 · Cited by 90
Self-citationIncreased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Gradient Hydrogel Construct Based on an Improved Cell Assembling System
Li, S., Yan, Y., Xiong, Z., Zhang, C. W. R., & Wang, X. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509103357 · Cited by 79
Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips
Cheng, J., Lin, F., Liu, H., Yan, Y., Wang, X., Zhang, R., & Xiong, Z. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2896215 · Cited by 66
Murine granulosa cell morphology and function are regulated by a synthetic Arg–Gly–Asp matrix
Kreeger, P. K., Woodruff, T. K., & Shea, L. D. (2003) · Molecular and Cellular Endocrinology · doi:10.1016/s0303-7207(03)00209-0 · Cited by 64
Determination of the maximum gelation temperature in gelatin gels
Tosh, S. M., & Marangoni, A. G. (2004) · Applied Physics Letters · doi:10.1063/1.1756210 · Cited by 61
Low temperature tolerance of human embryonic stem cells
Heng, B. C., Vinoth, K. J., Liu, H., Hande, M. P., & Cao, T. (2006) · International Journal of Medical Sciences · doi:10.7150/ijms.3.124 · Cited by 24
Calcium Signalling and Regulation of Cell Function
Bootman, M. D., & Lipp, P. (2001) · Wiley eBooks · doi:10.1038/npg.els.0001265 · Cited by 23
Cited by
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Metadata
- Authors
- Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G.
- Venue
- Biomaterials Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 7
- Pages
- 763
- ISSN
- 2047-4830 (ISSN-L)
- 2047-4849
- OpenAlex
- W2171492615
- Cited by
- 610
- References
- 48
- FWCI
- 8.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.