The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Programming MOFs for water sorption: amino-functionalized MIL-125 and UiO-66 for heat transformation and heat storage applications
Abstract
Sorption-based heat transformation and storage appliances are very promising for utilizing solar heat and waste heat in cooling or heating applications. The economic and ecological efficiency of sorption-based heat transformation depends on the availability of suitable hydrophilic and hydrothermally stable sorption materials. We investigated the feasibility of using the metal-organic frameworks UiO-66(Zr), UiO-67(Zr), H2N-UiO-66(Zr) and H2N-MIL-125(Ti) as sorption materials in heat transformations by means of volumetric water adsorption measurements, determination of the heat of adsorption and a 40-cycle ad/desorption stress test. The amino-modified compounds H2N-UiO-66 and H2N-MIL-125 feature high heat of adsorption (89.5 and 56.0 kJ mol(-1), respectively) and a very promising H2O adsorption isotherm due to their enhanced hydrophilicity. For H2N-MIL-125 the very steep rise of the H2O adsorption isotherm in the 0.1 < p/p0 < 0.2 region is especially beneficial for the intended heat pump application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
A New Zirconium Inorganic Building Brick Forming Metal Organic Frameworks with Exceptional Stability
Cavka, J. H., Jakobsen, S., Olsbye, U., Guillou, N., Lamberti, C., Bordiga, S., & Lillerud, K. P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8057953 · Cited by 7,336
Synthesis and Stability of Tagged UiO-66 Zr-MOFs
Kandiah, M., Nilsen, M. H., Usseglio, S., Jakobsen, S., Olsbye, U., Tilset, M., Larabi, C., Quadrelli, E. A., Bonino, F., & Lillerud, K. P. (2010) · Chemistry of Materials · doi:10.1021/cm102601v · Cited by 2,031
Valenzano, L., Civalleri, B., Chavan, S., Bordiga, S., Nilsen, M. H., Jakobsen, S., Lillerud, K. P., & Lamberti, C. (2011) · Chemistry of Materials · doi:10.1021/cm1022882 · Cited by 1,919
Modulated Synthesis of Zr‐Based Metal–Organic Frameworks: From Nano to Single Crystals
Schaate, A., Roy, P., Godt, A., Lippke, J., Waltz, F., Wiebcke, M., & Behrens, P. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201003211 · Cited by 1,701
A New Photoactive Crystalline Highly Porous Titanium(IV) Dicarboxylate
Dan-Hardi, M., Serre, C., Frot, T., Rozes, L., Maurin, G., Sanchez, C., & Férey, G. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903726m · Cited by 1,440
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Isoreticular synthesis and modification of frameworks with the UiO-66 topology
Garibay, S. J., & Cohen, S. M. (2010) · Chemical Communications · doi:10.1039/c0cc02990d · Cited by 822
Tuning the Adsorption Properties of UiO-66 via Ligand Functionalization
Cmarik, G. E., Kim, M., Cohen, S. M., & Walton, K. S. (2012) · Langmuir · doi:10.1021/la3035352 · Cited by 638
The Interaction of Water with MOF-5 Simulated by Molecular Dynamics
Greathouse, J. A., & Allendorf, M. D. (2006) · Journal of the American Chemical Society · doi:10.1021/ja063506b · Cited by 626
Bauer, S., Serre, C., Devic, T., Horcajada, P., Marrot, J., Férey, G., & Stock, N. (2008) · Inorganic Chemistry · doi:10.1021/ic800538r · Cited by 620
Effect of Water Adsorption on Retention of Structure and Surface Area of Metal–Organic Frameworks
Schoenecker, P. M., Carson, C. G., Jasuja, H., Flemming, C. J. J., & Walton, K. S. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202325p · Cited by 557
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
Solar assisted air conditioning of buildings – an overview
Henning, H.-M. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.07.021 · Cited by 537
Adsorption/catalytic properties of MIL-125 and NH2-MIL-125
Kim, S.-N., Kim, J., Kim, H.-Y., Cho, H.-Y., & Ahn, W.-S. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.08.014 · Cited by 528
A Series of Isoreticular, Highly Stable, Porous Zirconium Oxide Based Metal–Organic Frameworks
Guillerm, V., Ragon, F., Dan‐Hardi, M., Devic, T., Vishnuvarthan, M., Campo, B., Vimont, A., Clet, G., Yang, Q., Maurin, G., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204806 · Cited by 499
H2storage in isostructural UiO-67 and UiO-66 MOFs
Chavan, S., Vitillo, J. G., Gianolio, D., Zavorotynska, O., Civalleri, B., Jakobsen, S., Nilsen, M. H., Valenzano, L., Lamberti, C., Lillerud, K. P., et al. (2012) · Phys. Chem. Chem. Phys. · doi:10.1039/c1cp23434j · Cited by 485
Cychosz, K. A., & Matzger, A. J. (2010) · Langmuir · doi:10.1021/la103234u · Cited by 455
MIL-100(Al, Fe) as water adsorbents for heat transformation purposes—a promising application
Jeremias, F., Khutia, A., Henninger, S. K., & Janiak, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c2jm15615f · Cited by 440
Self-citationA review on adsorption heat pump: Problems and solutions
Demir, H., Mobedi, M., & Ülkü, S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.005 · Cited by 388
Water Adsorption Characteristics of MIL‐101 for Heat‐Transformation Applications of MOFs
Ehrenmann, J., Henninger, S. K., & Janiak, C. (2010) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201001156 · Cited by 331
Self-citationChallenging offers of material science for adsorption heat transformation: A review
Aristov, Y. I. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.09.003 · Cited by 320
MOFs for Use in Adsorption Heat Pump Processes
Henninger, S. K., Jeremias, F., Kummer, H., & Janiak, C. (2012) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201101056 · Cited by 318
Self-citationPore Surface Tailored SOD‐Type Metal‐Organic Zeolites
Zhang, J., Zhu, A., Lin, R., Qi, X., & Chen, X. (2011) · Advanced Materials · doi:10.1002/adma.201004028 · Cited by 314
Water adsorption characteristics of novel materials for heat transformation applications
Henninger, S. K., Schmidt, F. P., & Henning, H.-M. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.028 · Cited by 298
Self-citationEffect of NH2 and CF3 functionalization on the hydrogen sorption properties of MOFs
Zlotea, C., Phanon, D., Mazaj, M., Heurtaux, D., Guillerm, V., Serre, C., Horcajada, P., Devic, T., Magnier, E., Cuevas, F., et al. (2011) · Dalton Transactions · doi:10.1039/c1dt10115c · Cited by 297
Water Sorption Cycle Measurements on Functionalized MIL-101Cr for Heat Transformation Application
Khutia, A., Rammelberg, H. U., Schmidt, T., Henninger, S., & Janiak, C. (2013) · Chemistry of Materials · doi:10.1021/cm304055k · Cited by 275
Self-citationAn Evaluation of UiO‐66 for Gas‐Based Applications
Wiersum, A. D., Soubeyrand‐Lenoir, E., Yang, Q., Moulin, B., Guillerm, V., Yahia, M. B., Bourrelly, S., Vimont, A., Miller, S., Vagner, C., et al. (2011) · Chemistry – An Asian Journal · doi:10.1002/asia.201100201 · Cited by 240
A new generation cooling device employing CaCl2-in-silica gel–water system
Saha, B. B., Chakraborty, A., Koyama, S., & Aristov, Y. I. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.018 · Cited by 210
CH4 storage and CO2 capture in highly porous zirconium oxide based metal–organic frameworks
Yang, Q., Guillerm, V., Ragon, F., Wiersum, A. D., Llewellyn, P. L., Zhong, C., Devic, T., Serre, C., & Maurin, G. (2012) · Chemical Communications · doi:10.1039/c2cc34714h · Cited by 206
Aristov, Y. I., Dawoud, B., Glaznev, I. S., & Elyas, A. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.10.042 · Cited by 168
An overview on adsorption pairs for cooling
Askalany, A. A., Salem, M., ISMAEL, I. M., Ali, A. H. H., Morsy, M. G., & Saha, B. B. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.037 · Cited by 164
Postsynthetic tuning of hydrophilicity in pyrazolate MOFs to modulate water adsorption properties
Wade, C. R., Corrales-Sanchez, T., Narayan, T. C., & Dincă, M. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40876k · Cited by 162
Aristov, Y. I. (2007) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.07we228 · Cited by 159
Rational Tuning of Water Vapor and CO 2 Adsorption in Highly Stable Zr-Based MOFs
Jasuja, H., Zang, J., Sholl, D. S., & Walton, K. S. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp308657x · Cited by 135
Metal‐Organic Frameworks in Monolithic Structures
Küsgens, P., Zgaverdea, A. C., Fritz, H. ‐., Siegle, S., & Kaskel, S. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03824.x · Cited by 134
Optimal adsorbent for adsorptive heat transformers: Dynamic considerations
Aristov, Y. I. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2009.01.022 · Cited by 119
Novel Sorption Materials for Solar Heating and Cooling
Henninger, S. K., Jeremias, F., Kummer, H., Schossig, P., & Henning, H. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.11.033 · Cited by 115
Self-citationMustafa, D., Breynaert, E., Bajpe, S. R., Martens, J. A., & Kirschhock, C. E. A. (2011) · Chemical Communications · doi:10.1039/c1cc12341f · Cited by 111
Cited by
Water Adsorption in Porous Metal–Organic Frameworks and Related Materials
Furukawa, H., Gándara, F., Zhang, Y.-B., Jiang, J., Queen, W. L., Hudson, M. R., & Yaghi, O. M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500330a · Cited by 2,888
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
MOF-Based Membranes for Gas Separations
Qian, Q., Asinger, P. A., Lee, M. J., Han, G., Mizrahi Rodriguez, K., Lin, S., Benedetti, F. M., Wu, A. X., Chi, W. S., & Smith, Z. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00119 · Cited by 1,553
Water adsorption in MOFs: fundamentals and applications
Canivet, J., Fateeva, A., Guo, Y., Coasne, B., & Farrusseng, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00078a · Cited by 1,444
Kökçam-Demir, Ü., Goldman, A., Esrafili, L., Gharib, M., Morsali, A., Weingart, O., & Janiak, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00609e · Cited by 895
Self-citation
Metadata
- Authors
- Jeremias, F., Lozan, V., Henninger, S. K., & Janiak, C.
- Venue
- Dalton Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 42
- Issue
- 45
- Pages
- 15967
- ISSN
- 1477-9226 (ISSN-L)
- 1477-9234
- OpenAlex
- W2056378048
- Cited by
- 279
- References
- 40
- FWCI
- 31.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.