The DOI matches its Crossref record; 159 of the 159 references it cites were found in a registry or an index.
Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries
Abstract
This article comprehensively reviews the recent progress in the development of key components of lithium-ion batteries, including positive/negative electrodes, electrolytes and separators. The necessity of developing batteries with high energy/power density and long cycle-life is emphasized both in terms of industrial and academic perspectives.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
Structural Changes in Silicon Anodes during Lithium Insertion/Extraction
Obrovac, M. N., & Christensen, L. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1652421 · Cited by 1,995
A review on electrolyte additives for lithium-ion batteries
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.074 · Cited by 1,831
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Review on gel polymer electrolytes for lithium batteries
Manuel Stephan, A. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.09.017 · Cited by 1,422
Approaching Theoretical Capacity of LiFePO[sub 4] at Room Temperature at High Rates
Huang, H., Yin, S.-C., & Nazar, L. F. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1396695 · Cited by 1,407
Zhang, R., Chen, X., Chen, X., Cheng, X., Zhang, X., Yan, C., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702099 · Cited by 1,225
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries
Thackeray, M. M., Johnson, C. S., Vaughey, J. T., Ha N. LiCurrent address eVionyx Inc., & Hackney, S. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b417616m · Cited by 1,109
Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires
Liu, W., Lee, S. W., Lin, D., Shi, F., Wang, S., Sendek, A. D., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.35 · Cited by 1,103
A review of advanced and practical lithium battery materials
Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04225k · Cited by 1,075
Challenges and Recent Progress in the Development of Si Anodes for Lithium‐Ion Battery
Jin, Y., Zhu, B., Lu, Z., Liu, N., & Zhu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700715 · Cited by 1,074
Nylon 6 nanocomposites by melt compounding
Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(00)00380-3 · Cited by 1,045
Dead lithium: mass transport effects on voltage, capacity, and failure of lithium metal anodes
Chen, K.-H., Wood, K. N., Kazyak, E., LePage, W. S., Davis, A. L., Sanchez, A. J., & Dasgupta, N. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00371d · Cited by 1,007
Hu, Y., Demir‐Cakan, R., Titirici, M., Müller, J., Schlögl, R., Antonietti, M., & Maier, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200704287 · Cited by 968
Electrolyte additives for lithium ion battery electrodes: progress and perspectives
Haregewoin, A. M., Wotango, A. S., & Hwang, B.-J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee00123h · Cited by 907
Fire-extinguishing organic electrolytes for safe batteries
Wang, J., Yamada, Y., Sodeyama, K., Watanabe, E., Takada, K., Tateyama, Y., & Yamada, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0033-8 · Cited by 907
Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., & Chung, T. C. (2001) · Chemistry of Materials · doi:10.1021/cm0110627 · Cited by 903
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Lu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Liu, W., Li, X., Xiong, D., Hao, Y., Li, J., Kou, H., Yan, B., Li, D., Lu, S., Koo, A., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.11.010 · Cited by 677
Yoo, H. D., Markevich, E., Salitra, G., Sharon, D., & Aurbach, D. (2014) · Materials Today · doi:10.1016/j.mattod.2014.02.014 · Cited by 664
Spinel Anodes for Lithium‐Ion Batteries
Ferg, E., Gummow, R. J., de Kock, A., & Thackeray, M. M. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059324 · Cited by 661
Electrospun Core–Shell Fibers for Robust Silicon Nanoparticle-Based Lithium Ion Battery Anodes
Hwang, T. H., Lee, Y. M., Kong, B.-S., Seo, J.-S., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl203817r · Cited by 658
Schipper, F., Bouzaglo, H., Dixit, M., Erickson, E. M., Weigel, T., Talianker, M., Grinblat, J., Burstein, L., Schmidt, M., Lampert, J., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701682 · Cited by 565
Lithium Metal Anodes with an Adaptive “Solid-Liquid” Interfacial Protective Layer
Liu, K., Pei, A., Lee, H. R., Kong, B., Liu, N., Lin, D., Liu, Y., Liu, C., Hsu, P.-C., Bao, Z., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13314 · Cited by 560
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Cho, Y., Oh, P., & Cho, J. (2013) · Nano Letters · doi:10.1021/nl304558t · Cited by 501
Dominko, R., Bele, M., Gaberšček, M., Remškar, M., Hanžel, D., Pejovnik, S., & Jamnik, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1860492 · Cited by 482
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01393b · Cited by 466
Reaction behavior of LiFePO4 as a cathode material for rechargeable lithium batteries
Takahashi, M. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00064-4 · Cited by 452
Meethong, N., Huang, H. S., Speakman, S. A., et al. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600938 · Cited by 440
Hautier, G., Jain, A., Ong, S. P., Kang, B., Moore, C., Doe, R., & Ceder, G. (2011) · Chemistry of Materials · doi:10.1021/cm200949v · Cited by 440
Enhanced reversible lithium storage in a nanosize silicon/graphene composite
Chou, S.-L., Wang, J.-Z., Choucair, M., Liu, H.-K., Stride, J. A., & Dou, S.-X. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.024 · Cited by 424
Double Carbon Coating of LiFePO4 as High Rate Electrode for Rechargeable Lithium Batteries
Oh, S. W., Myung, S., Oh, S., Oh, K. H., Amine, K., Scrosati, B., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.200904027 · Cited by 391
Jiao, S., Zheng, J., Li, Q., Li, X., Engelhard, M. H., Cao, R., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2017.10.007 · Cited by 386
Self-citationZhao, J., Lu, Z., Liu, N., Lee, H.-W., McDowell, M. T., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6088 · Cited by 384
Jo, C., Cho, D.-H., Noh, H.-J., Yashiro, H., Sun, Y., & Myung, S. (2014) · Nano Research · doi:10.1007/s12274-014-0631-8 · Cited by 359
Zhao, Y., Li, X., Yan, B., Li, D., Lawes, S., & Sun, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.008 · Cited by 356
Xu, Q., Sun, J., Yin, Y., & Guo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705235 · Cited by 340
Costa, C. M., Silva, M. M., & Lanceros-Méndez, S. (2013) · RSC Advances · doi:10.1039/c3ra40732b · Cited by 330
Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode
Yuan, Y., Wu, F., Bai, Y., Li, Y., Chen, G., Wang, Z., & Wu, C. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.06.022 · Cited by 327
Toward Reliable Values of Electrochemical Stability Limits for Electrolytes
Xu, K., Ding, S. P., & Jow, T. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392609 · Cited by 326
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
Anisotropy of Electronic and Ionic Transport in LiFePO[sub 4] Single Crystals
Amin, R., Balaya, P., & Maier, J. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2388240 · Cited by 316
Porcarelli, L., Shaplov, A. S., Bella, F., Nair, J. R., Mecerreyes, D., & Gerbaldi, C. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00216 · Cited by 312
Graphene/nanosized silicon composites for lithium battery anodes with improved cycling stability
Xiang, H., Zhang, K., Ji, G., et al. (2011) · Carbon · doi:10.1016/j.carbon.2011.01.002 · Cited by 305
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T., McOwen, D., Dai, J., Luo, W., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 303
Self-citationCho, W., Kim, S.-M., Song, J. H., Yim, T., Woo, S.-G., Lee, K.-W., Kim, J.-S., & Kim, Y.-J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.128 · Cited by 302
Lin, D., Zhao, J., Sun, J., Yao, H., Liu, Y., Yan, K., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1619489114 · Cited by 299
Saint, J., Morcrette, M., Larcher, D., Laffont, L., Beattie, S., Pérès, J. ‐., Talaga, D., Couzi, M., & Tarascon, J. ‐. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600937 · Cited by 296
Lee, M.-J., Lee, S., Oh, P., Kim, Y., & Cho, J. (2014) · Nano Letters · doi:10.1021/nl404430e · Cited by 291
The elevated temperature performance of the LiMn2O4/C system: failure and solutions
Amatucci, G., Du Pasquier, A., Blyr, A., Zheng, T., & Tarascon, J.-M. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00209-1 · Cited by 288
Improved lithium manganese oxide spinel/graphite Li-ion cells for high-power applications
Amine, K., Liu, J., Kang, S., Belharouak, I., Hyung, Y.-E., Vissers, D. R., & Henriksen, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.11.007 · Cited by 274
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Chen, Z., Wang, J., Chao, D., Baikie, T., Bai, L., Chen, S., Zhao, Y., Sum, T. C., Lin, J., & Shen, Z. (2016) · Scientific Reports · doi:10.1038/srep25771 · Cited by 268
Yoon, C. S., Ryu, H.-H., Park, G.-T., Kim, J.-H., Kim, K.-H., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11346c · Cited by 263
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
Wu, F., Li, N., Su, Y., Zhang, L., Bao, L., Wang, J., Chen, L., Zheng, Y., Dai, L., Peng, J., et al. (2014) · Nano Letters · doi:10.1021/nl501164y · Cited by 250
Self-citationLu, J., Yang, L., Xu, B., Wu, Q., Zhang, D., Yuan, S., Zhai, Y., Wang, X., Fan, Y., & Hu, Z. (2014) · ACS Catalysis · doi:10.1021/cs400931z · Cited by 247
Yang, K., Fan, L., Guo, J., & Qu, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2011.12.121 · Cited by 235
Zhang, B., Metzger, M., Solchenbach, S., Payne, M., Meini, S., Gasteiger, H. A., Garsuch, A., & Lucht, B. L. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00072 · Cited by 221
Lithium titanate as anode material for lithium-ion cells: a review
Sandhya, C. P., John, B., & Gouri, C. (2014) · Ionics · doi:10.1007/s11581-014-1113-4 · Cited by 217
Yang, J., Wang, J., Tang, Y., Wang, D., Li, X., Hu, Y., Li, R., Liang, G., Sham, T.-K., & Sun, X. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24163g · Cited by 216
Two-phase transition of Li-intercalation compounds in Li-ion batteries
Li, D., & Zhou, H. S. (2014) · Materials Today · doi:10.1016/j.mattod.2014.06.002 · Cited by 190
Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries
Howard, W. F., & Spotnitz, R. M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.046 · Cited by 185
Metallurgically lithiated SiO x anode with high capacity and ambient air compatibility
Zhao, J., Lee, H.-W., Sun, J., Yan, K., Liu, Y., Liu, W., Lu, Z., Lin, D., Zhou, G., & Cui, Y. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1603810113 · Cited by 182
Yamada, Y., Takazawa, Y., Miyazaki, K., & Abe, T. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1037427 · Cited by 179
Improving the high rate performance of Li4Ti5O12 through divalent zinc substitution
Yi, T., Liu, H., Zhu, Y., Jiang, L., Xie, Y. H., & Zhu, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.080 · Cited by 175
Yang, G., Chen, J., Xiao, P., Agboola, P. O., Shakir, I., & Xu, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02810a · Cited by 169
Solvothermal‐Derived S‐Doped Graphene as an Anode Material for Sodium‐Ion Batteries
Quan, B., Jin, A., Yu, S., Kang, S. M., Jeong, J., Abruña, H. D., Jin, L., Piao, Y., & Sung, Y. (2018) · Advanced Science · doi:10.1002/advs.201700880 · Cited by 168
Yang, L., Takahashi, M., & Wang, B. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.09.014 · Cited by 165
Synthesis of Li-Rich NMC: A Comprehensive Study
Pimenta, V., Sathiya, M., Batuk, D., Abakumov, A. M., Giaume, D., Cassaignon, S., Larcher, D., & Tarascon, J.-M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03230 · Cited by 163
ZnFe2O4‐C/LiFePO4‐CNT: A Novel High‐Power Lithium‐Ion Battery with Excellent Cycling Performance
Varzi, A., Bresser, D., von Zamory, J., Müller, F., & Passerini, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400054 · Cited by 155
A Novel Electrolyte Salt Additive for Lithium‐Ion Batteries with Voltages Greater than 4.7 V
Li, Y., Wan, S., Veith, G. M., Unocic, R. R., Paranthaman, M. P., Dai, S., & Sun, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601397 · Cited by 150
Electrolyte Formulations Based on Dinitrile Solvents for High Voltage Li-Ion Batteries
Duncan, H., Salem, N. M., & Abu‐Lebdeh, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.088306jes · Cited by 144
Xing, L., Vatamanu, J., Borodin, O. A., Smith, G. D., & Bedrov, D. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3054179 · Cited by 141
Li, J., Yao, R., & Cao, C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500215b · Cited by 141
Zuo, T., Yin, Y., Wang, S., Wang, P., Yang, X., Liu, J., Yang, C., & Guo, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b04136 · Cited by 139
Xu, M., Tsiouvaras, N., Garsuch, A., Gasteiger, H. A., & Lucht, B. L. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp501970j · Cited by 138
Oh, S., Myung, S., Park, J. B., Scrosati, B., Amine, K., & Sun, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107394 · Cited by 125
Cho, J., Kim, H., & Park, B. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1790511 · Cited by 123
Kim, J., Lee, J., Ma, H., Jeong, H. Y., Cha, H., Lee, H., Yoo, Y., Park, M., & Cho, J. (2017) · Advanced Materials · doi:10.1002/adma.201704309 · Cited by 120
Zhang, J., Yang, Z., Gao, R., Gu, L., Hu, Z., & Liu, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08802 · Cited by 119
Self-citationYin, X.-S., Tang, W., Jung, I. D., Phua, K. C., Adams, S., Lee, S. W., & Zheng, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.003 · Cited by 119
Wu, M.-S., Chiang, P.-C. J., Lin, J.-C., & Jan, Y.-S. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.12.012 · Cited by 117
Recent progress in surface coating of layered LiNi x Co y Mn z O 2 for lithium-ion batteries
Chen, Z., Chao, D., Lin, J., & Shen, Z. (2017) · Materials Research Bulletin · doi:10.1016/j.materresbull.2017.05.021 · Cited by 117
Zhang, Z., Sherlock, D., West, R. M., West, R., Amine, K., & Lyons, L. J. (2003) · Macromolecules · doi:10.1021/ma0349276 · Cited by 115
Rational design of graphitic-inorganic Bi-layer artificial SEI for stable lithium metal anode
Zhu, J., Li, P., Chen, X., Legut, D., Fan, Y., Zhang, R., Lü, Y., Cheng, X., & Zhang, Q. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.06.023 · Cited by 113
Yi, T., Yang, S.-Y., Li, X., Yao, J., Zhu, Y., & Zhu, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.005 · Cited by 111
A review of fault tolerant control strategies applied to proton exchange membrane fuel cell systems
Dijoux, É., Steiner, N. Y., Benne, M., Péra, M., & Grondin-Pérez, B. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.058 · Cited by 111
Chang, Z., Lv, H.-J., Tang, H., Hua-ji, L., Yuan, X., & Wang, H. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.03.063 · Cited by 110
Oh, S., Jung, H., Yoon, C. S., Myung, S., Chen, Z., Amine, K., & Sun, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.159 · Cited by 110
Lin, C., Ding, B., Xin, Y., Cheng, F., Lai, M. O., Li, L., & Zhou, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.120 · Cited by 104
Song, J., Lee, H., Choo, M., Park, J.-K., & Kim, H. (2015) · Scientific Reports · doi:10.1038/srep14458 · Cited by 103
Study of Cathode Materials for Lithium-Ion Batteries: Recent Progress and New Challenges
Schipper, F., Nayak, P. K., Erickson, E. M., Amalraj, S. F., Srur-Lavi, O., Penki, T. R., Talianker, M., Grinblat, J., Sclar, H., Breuer, O., et al. (2017) · Inorganics · doi:10.3390/inorganics5020032 · Cited by 103
Li, B., Xu, M., Li, B., Liu, Y., Yang, L., Li, W., & Hu, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.04.142 · Cited by 102
Zhu, Y., Casselman, M. D., Li, Y., Wei, A., & Abraham, D. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.07.070 · Cited by 95
Qin, L., Xu, H. J., Wang, D., Zhu, J., Chen, J., Zhang, W., Zhang, P., Zhang, Y., Tian, W., & Sun, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07362 · Cited by 95
Yang, S., Li, G., Zhu, Q., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15232k · Cited by 93
Shi, J., Qi, R., Zhang, X., Wang, P., Fu, W., Yin, Y., Xu, J. Z., Wan, L., & Guo, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14684 · Cited by 93
Self-citationYim, T., Kang, K. S., Mun, J., Lim, S. H., Woo, S., Kim, K. J., Park, M., Cho, W., Song, J. H., Han, Y., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.051 · Cited by 90
Huang, S., Tang, L., Najafabadi, H. S., Chen, S., & Ren, Z. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.030 · Cited by 86
Wang, Y., Yang, H., Wu, C., & Duh, J.-G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05942f · Cited by 86
Li, S.-Y., Zhao, Y.-Y., Shi, X.-M., Li, B.-C., Xu, X.-L., Zhao, W., & Cui, X.-L. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.052 · Cited by 83
Gmitter, A. J., Plitz, I., & Amatucci, G. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.016204jes · Cited by 82
Plastic Crystal-Lithium Batteries: An Effective Ambient Temperature All-Solid-State Power Source
Abouimrane, A., Abu‐Lebdeh, Y., Alarco, P., & Armand, M. B. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1759971 · Cited by 81
Hou, P., Li, F., Sun, Y.-Y., Pan, M., Wang, X., Shao, M., & Xu, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00909 · Cited by 77
Structural and electrochemical properties of LiNi1/3Mn1/3Co1/3O2−F prepared by solid state reaction
Kageyama, M., Li, D., Kobayakawa, K., Sato, Y., & Lee, Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.08.002 · Cited by 73
Li, J., Wang, L., Zhang, Q., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.011 · Cited by 71
Han, J., Park, I., Cha, J., Park, S., Park, S., Myeong, S., Cho, W., Kim, S., Hong, S. Y., Cho, J., et al. (2016) · ChemElectroChem · doi:10.1002/celc.201600297 · Cited by 71
Lee, Y.-S., Jeong, Y. B., & Kim, D. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.012 · Cited by 69
Ming, H., Yan, Y., Ming, J., Adkins, J., Li, X., Zhou, Q., & Zheng, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.12.096 · Cited by 69
Amarilla, J. M., Petrov, K., Picó, F., Avdeev, G., Rojo, J. M., & Rojas, R. M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.026 · Cited by 65
Tai, Z., Subramaniyam, C. M., Chou, S., Chen, L., Liu, H., & Dou, S. X. (2017) · Advanced Materials · doi:10.1002/adma.201700605 · Cited by 65
Yim, T., Jang, S. H., & Han, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.10.044 · Cited by 65
Kinetic Monte Carlo Study of Li Intercalation in LiFePO4
Xiao, P., & Henkelman, G. (2017) · ACS Nano · doi:10.1021/acsnano.7b08278 · Cited by 65
Zhu, M., Zhou, H., Shao, J., Feng, J., & Yuan, A. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.03.378 · Cited by 65
Ren, Y., Ding, J., Yuan, N., et al. (2011) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-011-1525-2 · Cited by 62
Ceramic-in-polymer versus polymer-in-ceramic polymeric electrolytes—A novel approach
Syzdek, J., Armand, M. B., Gizowska, M., Marcinek, M. L., Sasim, E., Szafran, M., & Wieczorek, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.070 · Cited by 61
High rate capability by sulfur-doping into LiFePO 4 matrix
Okada, K., Kimura, I., & Machida, K. (2018) · RSC Advances · doi:10.1039/c7ra12740e · Cited by 60
Li, X., Zhu, J., Fang, Y., Lv, W., Wang, F., Liu, Y., & Liu, H. (2018) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2018.03.031 · Cited by 60
Zuo, P., Cheng, G., Wang, L., Ma, Y., Du, C., Cheng, X., Wang, Z., & Yin, G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.101 · Cited by 59
A high-capacity NiCo2O4@reduced graphene oxide nanocomposite Li-ion battery anode
Wang, W. A., Song, X., Gu, C., Liu, D., Liu, J., & Huang, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.097 · Cited by 55
Quinlan, F. T., Sano, K., Willey, T. M., et al. (2001) · Chemistry of Materials · doi:10.1021/cm010335v · Cited by 54
Understanding the Enhanced Kinetics of Gradient-Chemical-Doped Lithium-Rich Cathode Material
Ding, Z., Xu, M., Liu, J., Huang, Q., Chen, L., Wang, P., Ivey, D. G., & Wei, W. F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02944 · Cited by 51
Lee, M., Lho, E., Bai, P., Chae, S., Li, J., & Cho, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01076 · Cited by 50
Dendrite-Free Lithium Deposition for Lithium Metal Anodes with Interconnected Microsphere Protection
Lee, Y.-G., Ryu, S., Sugimoto, T., Yu, T.-H., Chang, W.-S., Yang, Y., Jung, C., Woo, J., Kang, S. G., Han, H. N., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01304 · Cited by 50
Abe, K., Hattori, T., Kawabe, K., Ushigoe, Y., & Yoshitake, H. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2746570 · Cited by 45
Wei, H., Yang, J., Zhang, Y., Qian, Y., & Geng, H. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.03.100 · Cited by 44
Liu, H., Tang, Y., Zhao, W., Ding, W., Xu, F., Liang, C., Zhang, Z., Lin, T., & Huang, F. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701261 · Cited by 35
Takeuchi, S., Yano, S., Fukutsuka, T., Miyazaki, K., & Abe, T. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002301jes · Cited by 34
Free-standing nitrogen-doped graphene paper for lithium storage application
Wen, H., Guo, B., Kang, W., & Zhang, C. (2018) · RSC Advances · doi:10.1039/c8ra01019f · Cited by 33
Xiao, P. F., Ding, B., Lai, M. O., & Lü, L. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.116306jes · Cited by 30
Yang, S., Wang, Q., Miao, J., Zhang, J., Zhang, D., Chen, Y., & Yang, H. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.092 · Cited by 28
Self-citationNovel electrolytes for Li4Ti5O12-based high power lithium ion batteries with nitrile solvents
Wang, Q., Péchy, P., Zakeeruddin, S. M., Exnar, I., & Grätzel, M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.157 · Cited by 26
Wang, Y., Tang, Y., Zhong, B., Liu, H., Zhong, Y., & Guo, X. (2013) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-013-2249-2 · Cited by 25
Surface modification of LiNi 1/3 Co 1/3 Mn 1/3 O 2 with Cr 2 O 3 for lithium ion batteries
Li, X., Lin, Y., Lin, Y., Lai, H., & Huang, Z. (2012) · Rare Metals · doi:10.1007/s12598-012-0479-6 · Cited by 22
Li, S., Liu, X., Liu, G., Yang, W., & Liu, H. (2016) · Ionics · doi:10.1007/s11581-016-1818-7 · Cited by 20
Ahn, J., Susanto, D., Noh, J.-K., Ali, G., Cho, B. W., Chung, K. Y., Kim, J. H., & Oh, S. H. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.042 · Cited by 20
Aida, T., Tsutsui, Y., Kanada, S., Okada, J., Hayashi, K., & Komukai, T. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3586-3 · Cited by 19
Hsu, C., Lin, H.-H., Liu, Y., & Lin, H. (2018) · New Journal of Chemistry · doi:10.1039/c8nj01137k · Cited by 18
Wang, F., Zhang, Y., Luo, L., Du, J., Guo, L., & Ding, Y. (2015) · Ionics · doi:10.1007/s11581-015-1562-4 · Cited by 17
Lv, Y., Su, J., Long, Y.-F., Lv, X., & Wen, Y. (2013) · Ionics · doi:10.1007/s11581-013-1002-2 · Cited by 16
Qin, W., Teng, Y., Zhang, J., Xiao, X., Li, Y., & Li, Z. (2017) · ChemElectroChem · doi:10.1002/celc.201701214 · Cited by 12
Self-citationImprovement of cycling stability of LiMn2O4 cathode by Fe2O3 surface modification for Li-ion battery
Şahan, H., Dokan, F. K., Ülgen, A., & Patat, Ş. (2013) · Ionics · doi:10.1007/s11581-013-0987-x · Cited by 11
Cost-effective and ecologically safe electrolyte for lithium batteries
Sirenko, V. I., Потапенко, А. В., & Prisiazshnyi, V. D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.114 · Cited by 11
Surfactant effect on synthesis of core-shell LiFePO4/C cathode materials for lithium-ion batteries
Wang, H., Zhang, X., Zheng, F., Huang, Y., & Li, Q. (2014) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-014-2598-5 · Cited by 10
Cited by
Prospects of organic electrode materials for practical lithium batteries
Lu, Y., & Chen, J. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-020-0160-9 · Cited by 1,341
Intermolecular Chemistry in Solid Polymer Electrolytes for High‐Energy‐Density Lithium Batteries
Zhou, Q., Ma, J., Dong, S., Li, X., & Cui, G. (2019) · Advanced Materials · doi:10.1002/adma.201902029 · Cited by 973
Wu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
Self-citationLiu, M., Wang, L., Zhao, K., Shi, S., Shao, Q., Zhang, L., Sun, X., Zhao, Y., & Zhang, J. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01722d · Cited by 429
Self-citationA Review of Solid Electrolyte Interphase (SEI) and Dendrite Formation in Lithium Batteries
Li, B., Chao, Y., Li, M., Xiao, Y., Li, R., Yang, K., Cui, X., Xu, G., Li, L., Yang, C., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00147-5 · Cited by 406
Self-citation
Metadata
- Authors
- Zhang, H., Zhao, H., Khan, M. A., Zou, W., Xu, J., Zhang, L., & Zhang, J.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2018
- Volume
- 6
- Issue
- 42
- Pages
- 20564-20620
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2890411188
- Cited by
- 416
- References
- 159
- FWCI
- 17.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.