Efficiency progress of inverted perovskite solar cells

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413

Sequential deposition as a route to high-performance perovskite-sensitized solar cells

Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092

Efficient planar heterojunction perovskite solar cells by vapour deposition

Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976

Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells

Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723

Interface engineering of highly efficient perovskite solar cells

Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632

Compositional engineering of perovskite materials for high-performance solar cells

Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431

Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells

Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445

Surface passivation of perovskite film for efficient solar cells

Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736

6.5% efficient perovskite quantum-dot-sensitized solar cell

Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173

Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors

Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684

Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers

Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154

Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123

Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells

Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024

Solvent Annealing of Perovskite‐Induced Crystal Growth for Photovoltaic‐Device Efficiency Enhancement

Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells

Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660

CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells

Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546

Enhanced photovoltage for inverted planar heterojunction perovskite solar cells

Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510

Perovskite solar cells employing organic charge-transport layers

Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474

Entropic stabilization of mixed A-cation ABX3 metal halide perovskites for high performance perovskite solar cells

Yi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281

Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide

Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236

Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers

Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234

First-principles study of the interaction and charge transfer between graphene and metals

Khomyakov, P. A., Giovannetti, G., Rusu, P. C., Brocks, G., van den Brink, J., & Kelly, P. J. (2009) · Physical Review B · doi:10.1103/physrevb.79.195425 · Cited by 1,230

Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency

Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187

Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems

Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080

Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink

Lin, R., Xiao, K., Qin, Z., Han, Q., Zhang, C., Wei, M., Saidaminov, M. I., Gao, Y., Xu, J., Xiao, M., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0466-3 · Cited by 1,073

Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells

Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007

Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency

Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894

Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide

Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848

High‐Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution‐Processed Copper‐Doped Nickel Oxide Hole‐Transporting Layer

Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833

Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules

Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791

Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon

Hou, Y., Aydin, E., De Bastiani, M., Xiao, C., Isikgor, F. H., Xue, D.-J., Chen, B., Chen, H., Bahrami, B., Chowdhury, A. H., et al. (2020) · Science · doi:10.1126/science.aaz3691 · Cited by 789

Impedance Spectroscopic Analysis of Lead Iodide Perovskite-Sensitized Solid-State Solar Cells

Dualeh, A., Moehl, T., Tétreault, N., Teuscher, J., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · ACS Nano · doi:10.1021/nn404323g · Cited by 728

Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells

Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677

Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering

Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644

π‐Conjugated Lewis Base: Efficient Trap‐Passivation and Charge‐Extraction for Hybrid Perovskite Solar Cells

Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640

Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering

Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634

Synthetic Approaches for Halide Perovskite Thin Films

Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631

Bulk heterojunction perovskite–PCBM solar cells with high fill factor

Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Kim, D., Jung, H. J., Park, I. J., Larson, B. W., Dunfield, S. P., Xiao, C., Kim, J., Tong, J., Boonmongkolras, P., Ji, S. G., et al. (2020) · Science · doi:10.1126/science.aba3433 · Cited by 611

Stabilizing heterostructures of soft perovskite semiconductors

Wang, Y., Wu, T., Barbaud, J., Kong, W., Cui, D., Chen, H., Yang, X., & Han, L. (2019) · Science · doi:10.1126/science.aax8018 · Cited by 585

High efficiency stable inverted perovskite solar cells without current hysteresis

Wu, C.-G., Chiang, C.-H., Tseng, Z.-L., Nazeeruddin, M. K., Hagfeldt, A., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00645g · Cited by 581

Solar cell efficiency tables (version 56)

Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2020) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3303 · Cited by 565

CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%

Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564

Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications

Cui, Y., Wang, Y., Bergqvist, J., Yao, H., Xu, Y., Gao, B., Yang, C., Zhang, S., Inganäs, O., Gao, F., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0448-5 · Cited by 553

Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells

Choi, H., Jeong, J., Kim, H.-B., Kim, S., Walker, B., Kim, G.-H., & Kim, J. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.017 · Cited by 544

Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface

Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532

Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells

Zuo, C., & Ding, L. (2015) · Small · doi:10.1002/smll.201501330 · Cited by 529

Potassium Incorporation for Enhanced Performance and Stability of Fully Inorganic Cesium Lead Halide Perovskite Solar Cells

Nam, J. K., Chai, S. U., Cha, W., Choi, Y. J., Kim, W., Jung, M. S., Kwon, J., Kim, D., & Park, J. H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00050 · Cited by 524

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

Momblona, C., Gil-Escrig, L., Bandiello, E., Hutter, E. M., Sessolo, M., Lederer, K., Blochwitz-Nimoth, J., & Bolink, H. J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee02100j · Cited by 514

Cost‐Performance Analysis of Perovskite Solar Modules

Cai, M., Wu, Y., Chen, H., Yang, X., Qiang, Y., & Han, L. (2016) · Advanced Science · doi:10.1002/advs.201600269 · Cited by 513

Thermal and Environmental Stability of Semi‐Transparent Perovskite Solar Cells for Tandems Enabled by a Solution‐Processed Nanoparticle Buffer Layer and Sputtered ITO Electrode

Bush, K. A., Bailie, C. D., Chen, Y., Bowring, A. R., Wang, W., Ma, W., Leijtens, T., Moghadam, F., & McGehee, M. D. (2016) · Advanced Materials · doi:10.1002/adma.201505279 · Cited by 507

Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells Using Highly Crystalline SnO2 Nanocrystals as the Robust Electron‐Transporting Layer

Zhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499

Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells

Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 499

High‐Performance Hole‐Extraction Layer of Sol–Gel‐Processed NiO Nanocrystals for Inverted Planar Perovskite Solar Cells

Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., et al. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405176 · Cited by 457

Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells

Bi, E., Chen, H., Xie, F., Wu, Y., Chen, W., Su, Y., Islam, A., Grätzel, M., Yang, X., & Han, L. (2017) · Nature Communications · doi:10.1038/ncomms15330 · Cited by 451

High-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells

Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451

Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode

Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445

p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells

Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444

Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement

Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437

Molecular doping enabled scalable blading of efficient hole-transport-layer-free perovskite solar cells

Wu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430

Direct Evidence of Ion Diffusion for the Silver‐Electrode‐Induced Thermal Degradation of Inverted Perovskite Solar Cells

Li, J., Dong, Q., Li, N., & Wang, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602922 · Cited by 422

Charge selective contacts, mobile ions and anomalous hysteresis in organic–inorganic perovskite solar cells

Zhang, Y., Liu, M., Eperon, G. E., Leijtens, T. C., McMeekin, D., Saliba, M., Zhang, W., de Bastiani, M., Petrozza, A., Herz, L. M., et al. (2015) · Materials Horizons · doi:10.1039/c4mh00238e · Cited by 414

Molecule‐Doped Nickel Oxide: Verified Charge Transfer and Planar Inverted Mixed Cation Perovskite Solar Cell

Chen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411

High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer

Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380

A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells

Wu, S., Chen, R., Zhang, S., Babu, B. H., Yue, Y., Zhu, H., Yang, Z., Chen, C., Chen, W., Huang, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09167-0 · Cited by 380

Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor

Wu, Z., Bai, S., Xiang, J., Yuan, Z., Yang, Y., Cui, W., Gao, X., Liu, Z., Jin, Y., & Sun, B. (2014) · Nanoscale · doi:10.1039/c4nr03181d · Cited by 378

Highly Efficient Electron Transport Obtained by Doping PCBM with Graphdiyne in Planar-Heterojunction Perovskite Solar Cells

Kuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376

C60 as an Efficient n-Type Compact Layer in Perovskite Solar Cells

Wojciechowski, K., Leijtens, T., Siprova, S., Schlueter, C., Hörantner, M. T., Wang, J. T.-W., Li, C.-Z., Jen, A. K.-Y., Lee, T.-L., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00902 · Cited by 374

Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells

Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365

Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites

Correa-Baena, J.-P., Luo, Y., Brenner, T. M., Snaider, J., Sun, S., Li, X., Jensen, M. A., Hartono, N. T. P., Nienhaus, L., Wieghold, S., et al. (2019) · Science · doi:10.1126/science.aah5065 · Cited by 364

Solution-Processed Nb:SnO2 Electron Transport Layer for Efficient Planar Perovskite Solar Cells

Ren, X., Yang, D., Yang, Z., Feng, J., Zhu, X., Niu, J., Liu, Y., Zhao, W., & Liu, S. F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13362 · Cited by 355

Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar Cells

Chen, W., Zhou, Y., Chen, G., Wu, Y., Tu, B., Liu, F., Huang, L., Ng, A. M. C., Djurišić, A. B., & He, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803872 · Cited by 348

Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis

Wang, M., Wang, H., Li, W., Hu, X., Sun, K., & Zang, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08314f · Cited by 337

Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes

Schmidt, T. M., Larsen‐Olsen, T. T., Carlé, J. E., Angmo, D., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500569 · Cited by 336

Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells

Zhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J., Yang, J., Lin, H., Yao, J., Li, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12613-8 · Cited by 330

In-situ cross-linking strategy for efficient and operationally stable methylammoniun lead iodide solar cells

Li, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329

Introducing Cu2O Thin Films as a Hole-Transport Layer in Efficient Planar Perovskite Solar Cell Structures

Chatterjee, S., & Pal, A. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11540 · Cited by 327

Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells

Choi, H., Mai, C.-K., Kim, H.-B., Jeong, J., Song, S., Bazan, G. C., Kim, J. Y., & Heeger, A. J. (2015) · Nature Communications · doi:10.1038/ncomms8348 · Cited by 323

Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells

Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319

Absolute limiting efficiencies for photovoltaic energy conversion

Araújo, G. L., & Martı́, A. (1994) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(94)90209-7 · Cited by 316

Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells

Brinkmann, K. O., Zhao, J., Pourdavoud, N., Becker, T., Hu, T., Olthof, S., Meerholz, K., Hoffmann, L., Gahlmann, T., Heiderhoff, R., et al. (2017) · Nature Communications · doi:10.1038/ncomms13938 · Cited by 315

Air‐Stable, Efficient Mixed‐Cation Perovskite Solar Cells with Cu Electrode by Scalable Fabrication of Active Layer

Deng, Y., Dong, Q., Bi, C., Yuan, Y., & Huang, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600372 · Cited by 312

Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency

Yoon, H., Kang, S. M., Lee, J.-K., & Choi, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01037g · Cited by 302

Mixed solvents for the optimization of morphology in solution-processed, inverted-type perovskite/fullerene hybrid solar cells

Kim, H.-B., Choi, H., Jeong, J., Kim, S., Walker, B., Song, S., & Kim, J. Y. (2014) · Nanoscale · doi:10.1039/c4nr00130c · Cited by 298

Simplified interconnection structure based on C60/SnO2-x for all-perovskite tandem solar cells

Yu, Z., Yang, Z., Ni, Z., Shao, Y., Chen, B., Lin, Y., Wei, H., Yu, Z. J., Holman, Z., & Huang, J. (2020) · Nature Energy · doi:10.1038/s41560-020-0657-y · Cited by 298

Low-cost solution-processed copper iodide as an alternative to PEDOT:PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells

Chen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290

Efforts to improve carrier mobility in radio frequency sputtered aluminum doped zinc oxide films

Agashe, C., Kluth, O., Hüpkes, J., Zastrow, U., Rech, B., & Wuttig, M. (2004) · Journal of Applied Physics · doi:10.1063/1.1641524 · Cited by 268

A 19.0% efficiency achieved in CuOx-based inverted CH3NH3PbI3−xClx solar cells by an effective Cl doping method

Rao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261

Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers

Bi, E., Tang, W., Chen, H., Wang, Y., Barbaud, J., Wu, T., Kong, W., Tu, P., Zhu, H., Zeng, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.030 · Cited by 261

Sequential Deposition of CH3NH3PbI3 on Planar NiO Film for Efficient Planar Perovskite Solar Cells

Hu, L., Peng, J., Wang, W., Xia, Z., Yuan, J., Lu, J., Huang, X., Ma, W., Song, H., Chen, W., et al. (2014) · ACS Photonics · doi:10.1021/ph5000067 · Cited by 259

High‐Performance Semitransparent Perovskite Solar Cells with 10% Power Conversion Efficiency and 25% Average Visible Transmittance Based on Transparent CuSCN as the Hole‐Transporting Material

Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500486 · Cited by 256

The Functions of Fullerenes in Hybrid Perovskite Solar Cells

Fang, Y., Bi, C., Wang, D., & Huang, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00657 · Cited by 254

Reduced Interface‐Mediated Recombination for High Open‐Circuit Voltages in CH3NH3PbI3 Solar Cells

Wolff, C. M., Zu, F., Paulke, A., Toro, L. P., Koch, N., & Neher, D. (2017) · Advanced Materials · doi:10.1002/adma.201700159 · Cited by 253

Sulfate‐Assisted Interfacial Engineering for High Yield and Efficiency of Triple Cation Perovskite Solar Cells with Alkali‐Doped TiO2 Electron‐Transporting Layers

Singh, T., Öz, S., Sasinska, A., Frohnhoven, R., Mathur, S., & Miyasaka, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706287 · Cited by 248

Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells

Lim, K., Ahn, S., Kim, Y., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03560k · Cited by 245

Matching Charge Extraction Contact for Wide‐Bandgap Perovskite Solar Cells

Lin, Y., Chen, B., Zhao, F., Zheng, X., Deng, Y., Shao, Y., Fang, Y., Bai, Y., Wang, C., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201700607 · Cited by 239

Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT:PSS hole transport layers

Liu, D., Li, Y., Yuan, J., Hong, Q., Shi, G., Yuan, D., Wei, J., Huang, C., Tang, J., & Fung, M.-K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10212c · Cited by 237

High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOxhole transport layer

Sun, W., Li, Y., Ye, S., Rao, H., Yan, W., Peng, H., Li, Y., Liu, Z., Wang, S., Chen, Z., et al. (2016) · Nanoscale · doi:10.1039/c6nr01927g · Cited by 236

Modulation of PEDOT:PSS pH for Efficient Inverted Perovskite Solar Cells with Reduced Potential Loss and Enhanced Stability

Wang, Q., Chueh, C.-C., Eslamian, M., & Jen, A. K.-Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11757 · Cited by 226

Hole‐Transporting Transistors and Circuits Based on the Transparent Inorganic Semiconductor Copper(I) Thiocyanate (CuSCN) Processed from Solution at Room Temperature

Pattanasattayavong, P., Yaacobi‐Gross, N., Zhao, K., Ndjawa, G. O. N., Li, J., Yan, F., O'Regan, B. C., Amassian, A., & Anthopoulos, T. D. (2013) · Advanced Materials · doi:10.1002/adma.201202758 · Cited by 222

Interfacial Electron Transfer Barrier at Compact TiO2/CH3NH3PbI3Heterojunction

Xing, G., Wu, B., Chen, S., Chua, J., Yantara, N., Mhaisalkar, S., Mathews, N., & Sum, T. C. (2015) · Small · doi:10.1002/smll.201403719 · Cited by 221

Metal Acetylacetonate Series in Interface Engineering for Full Low‐Temperature‐Processed, High‐Performance, and Stable Planar Perovskite Solar Cells with Conversion Efficiency over 16% on 1 cm2 Scale

Chen, W., Xu, L., Feng, X., Jie, J., & He, Z. (2017) · Advanced Materials · doi:10.1002/adma.201603923 · Cited by 215

Efficient and Highly Air Stable Planar Inverted Perovskite Solar Cells with Reduced Graphene Oxide Doped PCBM Electron Transporting Layer

Kakavelakis, G., Maksudov, T., Konios, D., Paradisanos, I., Kioseoglou, G., Stratakis, E., & Kymakis, E. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602120 · Cited by 211

Perovskite Solar Cells with Inorganic Electron‐ and Hole‐Transport Layers Exhibiting Long‐Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Seo, S., Jeong, S., Bae, C., Park, N., & Shin, H. (2018) · Advanced Materials · doi:10.1002/adma.201801010 · Cited by 211

Amorphous Tin Oxide as a Low-Temperature-Processed Electron-Transport Layer for Organic and Hybrid Perovskite Solar Cells

Barbé, J., Tietze, M. L., Neophytou, M., Murali, B., Alarousu, E., Labban, A. E., Abulikemu, M., Yue, W., Mohammed, O. F., McCulloch, I., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13675 · Cited by 207

Mixed A-Cation Perovskites for Solar Cells: Atomic-Scale Insights Into Structural Distortion, Hydrogen Bonding, and Electronic Properties

Ghosh, D., Smith, A. R., Walker, A. B., & Islam, M. S. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01851 · Cited by 205

High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%

Zhao, L., Luo, D., Wu, J., Hu, Q., Zhang, W., Chen, K., Liu, T., Liu, Y., Zhang, Y., Liu, F., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601175 · Cited by 191

Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact

Chavhan, S. D., Miguel, O., Grande, H., Pedro, V. G., Sánchez, R. S., Barea, E. M., Mora‐Seró, I., & Tena‐Zaera, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01310g · Cited by 190

Achieving Large‐Area Planar Perovskite Solar Cells by Introducing an Interfacial Compatibilizer

Lee, J., Kang, H., Kim, G., Back, H., Kim, J., Hong, S., Park, B., Lee, E., & Lee, K. (2017) · Advanced Materials · doi:10.1002/adma.201606363 · Cited by 190

Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells

Chen, C., Zhang, S., Wu, S., Zhang, W., Zhu, H., Xiong, Z., Zhang, Y., & Chen, W. (2017) · RSC Advances · doi:10.1039/c7ra06365b · Cited by 190

A copper-doped nickel oxide bilayer for enhancing efficiency and stability of hysteresis-free inverted mesoporous perovskite solar cells

Yao, K., Li, F., He, Q., Wang, X., Jiang, Y., Huang, H., & Jen, A. K.-Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.014 · Cited by 185

Efficacious engineering on charge extraction for realizing highly efficient perovskite solar cells

Yue, S., Liu, K., Xu, R., Li, M., Azam, M., Ren, K., Liu, J., Sun, Y., Wang, Z., Cao, D., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02685d · Cited by 177

Inverted Planar Perovskite Solar Cells with a High Fill Factor and Negligible Hysteresis by the Dual Effect of NaCl-Doped PEDOT:PSS

Hu, L., Sun, K., Wang, M., Chen, W., Yang, B., Fu, J., Xiong, Z., Li, X., Tang, X., Zang, Z., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14592 · Cited by 174

Improving Performance and Stability of Flexible Planar‐Heterojunction Perovskite Solar Cells Using Polymeric Hole‐Transport Material

Jo, J. W., Seo, M., Park, M., Kim, J., Park, J. S., Han, I. K., Ahn, H., Jung, J. W., Sohn, B., Ko, M. J., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600746 · Cited by 172

Dual‐Source Precursor Approach for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Luo, D., Zhao, L., Wu, J., Hu, Q., Zhang, Y., Xu, Z., Liu, Y., Liu, T., Chen, K., Yang, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604758 · Cited by 161

Improving the Performance and Stability of Inverted Planar Flexible Perovskite Solar Cells Employing a Novel NDI‐Based Polymer as the Electron Transport Layer

Kim, H. I., Kim, M., Choi, K., Lim, C., Kim, Y., Kwon, S., & Park, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702872 · Cited by 146

Extending the Continuous Operating Lifetime of Perovskite Solar Cells with a Molybdenum Disulfide Hole Extraction Interlayer

Kakavelakis, G., Paradisanos, I., Paci, B., Generosi, A., Papachatzakis, M. A., Maksudov, T., Najafi, L., Castillo, A. E. D. R., Kioseoglou, G., Stratakis, E. I., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702287 · Cited by 145

Interfacial Passivation of the p‐Doped Hole‐Transporting Layer Using General Insulating Polymers for High‐Performance Inverted Perovskite Solar Cells

Zhang, F., Song, J., Hu, R., et al. (2018) · Small · doi:10.1002/smll.201704007 · Cited by 141

A facile dedoping approach for effectively tuning thermoelectricity and acidity of PEDOT:PSS films

Tsai, T.-C., Chang, H.-C., Chen, C., Huang, Y., & Whang, W. (2014) · Organic Electronics · doi:10.1016/j.orgel.2013.12.023 · Cited by 137

Pseudohalide‐Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Dong, H., Wu, Z., Xi, J., Xu, X., Zuo, L., Lei, T., Zhao, X., Zhang, L., Hou, X., & Jen, A. K. ‐. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704836 · Cited by 137

Anomalous Charge‐Extraction Behavior for Graphene‐Oxide (GO) and Reduced Graphene‐Oxide (rGO) Films as Efficient p‐Contact Layers for High‐Performance Perovskite Solar Cells

Jokar, E., Huang, Z. Y., Narra, S., Wang, C., Kattoor, V., Chung, C., & Diau, E. W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701640 · Cited by 132

Polyelectrolyte based hole-transporting materials for high performance solution processed planar perovskite solar cells

Li, X., Liu, X., Wang, X., Zhao, L., Jiu, T., & Fang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04712a · Cited by 128

Toward Long‐Term Stable and Highly Efficient Perovskite Solar Cells via Effective Charge Transporting Materials

Wang, Y., Yue, Y., Yang, X., & Han, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800249 · Cited by 125

Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells

Chen, L.-C., Chen, C.-C., Liang, K.-C., Chang, S. H., Tseng, Z.-L., Yeh, S.-C., Chen, C., Wu, W., & Wu, C. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-016-1621-4 · Cited by 121

Efficient n-type dopants with extremely low doping ratios for high performance inverted perovskite solar cells

Bin, Z., Li, J., Wang, L., & Duan, L. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01987k · Cited by 119

Inverted planar perovskite solar cells with dopant free hole transporting material: Lewis base-assisted passivation and reduced charge recombination

Park, S. J., Jeon, S., Lee, I. K., Zhang, J., Jeong, H., Park, J., Bang, J., Ahn, T. K., Shin, H.-W., Kim, B., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02440a · Cited by 119

Ultrafast Dynamics of Hole Injection and Recombination in Organometal Halide Perovskite Using Nickel Oxide as p-Type Contact Electrode

Corani, A., Li, M.-H., Shen, P., Chen, P., Guo, T., Nahhas, A. E., Zheng, K., Yartsev, A. P., Sundström, V., & Ponseca, C. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00238 · Cited by 115

Thermally stable methylammonium-free inverted perovskite solar cells with Zn2+ doped CuGaO2 as efficient mesoporous hole-transporting layer

Chen, Y., Yan, J., Jia, X., Wu, Y., Yuan, N., Ding, J., Zhang, W., & Liu, S. F. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.042 · Cited by 110

Synergistic Effect of PbI2 Passivation and Chlorine Inclusion Yielding High Open‐Circuit Voltage Exceeding 1.15 V in Both Mesoscopic and Inverted Planar CH3NH3PbI3(Cl)‐Based Perovskite Solar Cells

Jiang, F., Rong, Y., Liu, H., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603968 · Cited by 99

Nanocrystalline CuO thin films: synthesis, microstructural and optoelectronic properties

Jundale, D. M., Joshi, P. B., Sen, S., & Patil, V. B. (2012) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-011-0616-2 · Cited by 88

Efficient and Stable Nonfullerene‐Graded Heterojunction Inverted Perovskite Solar Cells with Inorganic Ga2O3 Tunneling Protective Nanolayer

Ma, J., Zheng, M., Chen, C., Zhu, Z., Zheng, X., Chen, Z., Guo, Y., Liu, C., Yan, Y., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804128 · Cited by 88

Exploring the Limiting Open‐Circuit Voltage and the Voltage Loss Mechanism in Planar CH3NH3PbBr3 Perovskite Solar Cells

Chen, S., Hou, Y., Chen, H., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600132 · Cited by 85

Analysis of Ion‐Diffusion‐Induced Interface Degradation in Inverted Perovskite Solar Cells via Restoration of the Ag Electrode

Lee, H., & Lee, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702197 · Cited by 85

Effect of Mesostructured Layer upon Crystalline Properties and Device Performance on Perovskite Solar Cells

Listorti, A., Juarez-Perez, E. J., Frontera, C., Roiati, V., Garcia-Andrade, L., Colella, S., Rizzo, A., Ortiz, P., & Mora‐Seró, I. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00483 · Cited by 84

Improved Performance and Reliability of p‐i‐n Perovskite Solar Cells via Doped Metal Oxides

Savva, A., Burgués‐Ceballos, I., & Choulis, S. A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600285 · Cited by 79

Fine-tuning optical and electronic properties of graphene oxide for highly efficient perovskite solar cells

Liu, T., Kim, D., Han, H., et al. (2015) · Nanoscale · doi:10.1039/c5nr01433f · Cited by 78

Poly(9-vinylcarbazole) as a hole transport material for efficient and stable inverted planar heterojunction perovskite solar cells

Yang, L., Yan, Y., Cai, F., Li, J., & Wang, T. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.01.040 · Cited by 66

High-performance metal oxide-free inverted perovskite solar cells using poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) as the hole transport layer

Xu, C., Liu, Z., & Lee, E. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02241k · Cited by 58

Efficiency enhancement of cubic perovskite BaSnO 3 nanostructures based dye sensitized solar cells

Rajamanickam, N., Soundarrajan, P., Vendra, V. K., Jasinski, J. B., Sunkara, M. K., & Ramachandran, K. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp06754e · Cited by 55

Crosslinked and dopant free hole transport materials for efficient and stable planar perovskite solar cells

Zhang, Y., Kou, C., Zhang, J., Liu, Y., Li, W., Bo, Z., & Shao, M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12060a · Cited by 48

Room‐Temperature Vapor Deposition of Cobalt Nitride Nanofilms for Mesoscopic and Perovskite Solar Cells

Kang, J. S., Kim, J., Yoon, J., Kim, J., Yang, J., Chung, D. Y., Kim, M., Jeong, H., Son, Y. J., Kim, B. G., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703114 · Cited by 46

Fully crystalline perovskite-perylene hybrid photovoltaic cell capable of 1.2 V output with a minimized voltage loss

Ishii, A., Jena, A. K., & Miyasaka, T. (2014) · APL Materials · doi:10.1063/1.4895039 · Cited by 45

An effective surface modification strategy with high reproducibility for simultaneously improving efficiency and stability of inverted MA-free perovskite solar cells

Zhu, H., Wu, S., Yao, J., Chen, R., Pan, M., Chen, W., Zhou, J., Zhang, W., Wang, T., & Chen, W. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta07238a · Cited by 23

Rationally Designing Efficient Electrocatalysts for Direct Seawater Splitting: Challenges, Achievements, and Promises

Liu, J., Duan, S., Shi, H., Wang, T., Yang, X., Huang, Y., Wu, G., & Li, Q. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202210753 · Cited by 259