Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Items 101–200 of 473
He, Y. H., Fang, C. F., Xu, W., Tan, L., Qin, S., Yin, X., Feng, Y., Park, C. B., & Qu, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141371 · Cited by 24
Nguyen, H. T., Saha, N., Ngwabebhoh, F. A., Zandraa, O., Sáha, T., & Sáha, P. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00611 · Cited by 24
Li, D., Luo, C., Zhou, J. H., Dong, L., Chen, Y., Liu, G., & Qiao, S. (2023) · Polymers · doi:10.3390/polym15061579 · Cited by 24
Hou, B., Shan, X., Li, B., Zhang, Y., Xu, B. B., Cui, Q., Chen, Z., & Li, J. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c01160 · Cited by 24
Lira, M. C. D. A., da Cunha, R. B., Agrawal, P., Brito, G. D. F., & de Mélo, T. J. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01449 · Cited by 24
Ruiz-Silva, E., Rodríguez-Ortega, M., Rosales‐Rivera, L. C., Moscoso‐Sánchez, F. J., Rodrigue, D., & González‐Núñez, R. (2021) · Polymers · doi:10.3390/polym13020217 · Cited by 24
“polymers in a wide range of commodity and engineering applications [5].”
BackgroundInfluentialWhulanza, Y., Azadi, A., Supriadi, S., Rahman, S. F., Chalid, M., Irsyad, M., Nadhif, M. H., & Kreshanti, P. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e08600 · Cited by 24
“The observation period was chosen due to the rapid growth of host bone during its remodeling in three weeks’ time [65].”
Toughening Polylactide with Graft-Block Polymers
Lee, B., Maher, M. J., Schibur, H. J., Hillmyer, M. A., & Bates, F. S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00036 · Cited by 23
Cairone, S., Hegab, H. M., Khalil, H., Nassar, L., Wadi, V. S., Naddeo, V., & Hasan, S. W. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.168715 · Cited by 25
Kakhk, S. H. H., Rad, J. K., Abedini, H., & Mahdavian, A. R. (2023) · Polymer · doi:10.1016/j.polymer.2023.126545 · Cited by 23
Shou, T., Wang, B., Yin, D., Zhao, X., Hu, S., & Zhang, L. (2024) · Composites Communications · doi:10.1016/j.coco.2024.101940 · Cited by 23
Self-citationSupertough Polylactide Blend Foams with Controlled Cell Size
Wu, M., Ren, Q., Li, X., Gao, P., Wang, L., Zheng, W., Cui, P., Yi, X., & Yang, W. M. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c02051 · Cited by 22
de Perre, D. V., Serbruyns, L., Coltelli, M., Gigante, V., Aliotta, L., Lazzeri, A., Geerinck, R., & Verstichel, S. (2024) · Materials · doi:10.3390/ma17225436 · Cited by 25
“Another successful blending partner of PLA is Polycaprolactone (PCL) [8,16,26,27].”
Shar, A. S., Zhang, C., Song, X., Weng, Y., & Du, Q. (2021) · Polymers · doi:10.3390/polym13223962 · Cited by 22
“Other beneficial PLA properties that make PLA such an attractive green food packaging material include bioavailability [9], low energy input for the preparation, biodegradability [10], and low cost of raw material [11].”
BackgroundPoly(lactic acid) reinforced with synthetic polymer fibers: interactions, structure and properties
Ferdinánd, M., Várdai, R., Móczó, J., & Pukánszky, B. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107318 · Cited by 24
Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends
Zhang, Q., Gao, Y., Luo, B., Cui, Y., Shu, S., Chen, W., & Wang, L. (2023) · Polymers · doi:10.3390/polym15040952 · Cited by 34
“In the actual production and research process, it is found that PBST has good ductility, but its insufficient rigidity and low strength limit its application scope [16,17], while the high strength and high modulus of PLA can compensate for these defects [18].”
BackgroundOng, Y. T., Chen, T.-M., & Don, T. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127001 · Cited by 23
Polylactic acid/polycaprolactone/sawdust based biocomposites trays with enhanced compostability
Dhal, M. K., Madhu, K., Banerjee, A., Prasannavenkadesan, V., Kumar, A., & Katiyar, V. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126977 · Cited by 24
Gu, G., Cai, H., Wang, Y.-T., Tang, C. Y., Zou, G., Li, J., & Yang, R. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156136 · Cited by 23
Crystallization, structure and properties of polylactide/ladder poly(silsesquioxane) blends
Herc, A. S., Bojda, J., Nowacka, M., Lewiński, P., Maniukiewicz, W., Piórkowska, E., & Kowalewska, A. (2020) · Polymer · doi:10.1016/j.polymer.2020.122563 · Cited by 26
Deokar, M. D., Garnaik, B., & Sivaram, S. (2022) · ACS Omega · doi:10.1021/acsomega.1c04486 · Cited by 21
Poly(lactide)-Based Materials Modified with Biomolecules: A Review
Świerczyńska, M., Kudzin, M. H., & Chruściel, J. J. (2024) · Materials · doi:10.3390/ma17215184 · Cited by 22
Dadashi, P., Babaei, A., & Abdolrasouli, M. H. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25893 · Cited by 22
Jia, S., Wang, X., Zhang, Y., Yan, X., Pan, H., Zhao, Y., Han, L., Zhang, H., Dong, L., & Zhang, H. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2862-6 · Cited by 22
Self-citationRajabifar, N., & Jalali‐Arani, A. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54961 · Cited by 21
Bing, X., Wu, M., Ma, W., Xu, M., Zhou, X. H., Wang, L., & Zheng, W. (2024) · Polymer · doi:10.1016/j.polymer.2024.126883 · Cited by 32
Yu, X., Liu, H., Yan, M.-Y., Li, F., Ke, N., Wu, G., Chen, S., & Wang, Y. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00836 · Cited by 22
Self-citationZhao, K. X., Hu, W., & Hou, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09184 · Cited by 22
Toughening Poly(lactide) with Bio-Based Poly(farnesene) Elastomers
Halloran, M. W., Nicell, J. A., Leask, R. L., & Marić, M. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01183 · Cited by 20
Wu, G., Bian, P., Xu, R., Wang, T., Li, Z., Mao, H., Tai, Y., Wang, C., Ma, Z., Hou, X., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.158264 · Cited by 21
Ma, R., Zhang, Q., Wang, S., Li, B., Ma, L., Zhang, L., Yu, J., Fan, Y., & Wang, Z. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118134 · Cited by 19
Multiscale Interface Design for Toughened Polylactic Acid Green Composites
Ren, Z., Ding, K., Zhou, X., Ji, T., Sun, H. Y., Chi, X., Wei, Y., & Xu, M. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c02321 · Cited by 19
The construction of super-tough polylactide/crosslinked polyamide blends by dynamic vulcanization
Lu, Z., Wang, X., Jia, S., Zhao, L., Wang, Z., Han, L., Pan, H., Zhang, H., & Dong, L. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110007 · Cited by 19
Self-citationSmit, K. D., Marien, Y. W., Steenberge, P. H. M. V., D’hooge, D., & Edeleva, M. (2023) · Reaction Chemistry & Engineering · doi:10.1039/d2re00577h · Cited by 19
Bioplastics as next-generation eco-friendly materials: a comprehensive review
Sharma, S. D., Kumar, G., Bhardwaj, S. K., Chauhan, A., Rathi, A., Kumar, J., Sahil, K., & Vishvamitera, S. (2025) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-025-03214-9 · Cited by 21
“After that, these raw materials are subsequently usable in conventional refin-eries and polymerization facilities (Sharuddin et al. 2016; Zhao et al. 2020a, b).”
Naja Hasoon, K. T., & Panicker, U. G. (2026) · RSC Advances · doi:10.1039/d5ra08379f · Cited by 23
“165 Another notable drawback of PLA is its hydrophobic nature, which reduces its interaction with water or biological uids.”
Qin, W., Zhang, R., Fu, Y., & Chang, J. (2023) · Polymer International · doi:10.1002/pi.6583 · Cited by 18
Li, X., Mou, W., Li, Y., & Zhou, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.09.041 · Cited by 18
Aliotta, L., Vannozzi, A., Cinelli, P., Coltelli, M., & Lazzeri, A. (2022) · Polymers · doi:10.3390/polym14030615 · Cited by 20
“An economic and assessed method to tune polymeric matrix properties is the polymers blending [14].”
MethodMaaskant, E., Post, W., Brouwer, M. T., van Es, D. S., & van Velzen, E. U. T. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.04.005 · Cited by 23
Zhang, J., Hong, J., Wang, H., & Li, Y. (2023) · Composites Communications · doi:10.1016/j.coco.2023.101680 · Cited by 18
Poly(Isoprene)-Block-Poly(Ethylene Oxide) Diblock Copolymer Toughened Polylactide
Larson, M. C., Coote, J. P., Bates, F. S., & Ellison, C. J. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01832 · Cited by 17
Improved compatibilized TPS/PLA blends: effects of singular and binary compatibilization systems
Taghinezhad, S. F., Mansourieh, M., Abbasi, A., Major, I., & Pezzoli, R. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100819 · Cited by 21
Xie, J., Gu, K., Zhao, Y., Yao, J., Chen, X., & Shao, Z. (2022) · ACS Omega · doi:10.1021/acsomega.2c01102 · Cited by 17
“11,32,33 Generally, the presence of amino group-containing compounds will cause serious degradation of PLA during the melting process, resulting in a marked deterioration in mechanical properties.”
Tang, F., & Jeong, Y. G. (2022) · Polymer · doi:10.1016/j.polymer.2022.125281 · Cited by 17
4D printing of shape memory polylactic acid/ethylene-glycidyl methacrylate (PLA/E-GMA) blends
da Cunha, R. B., Agrawal, P., Brito, L. B. Q., Cunha, C. T. C., Brito, G. D. F., & de Mélo, T. J. A. (2023) · Smart Materials and Structures · doi:10.1088/1361-665x/aceae5 · Cited by 20
“This improvement can be attributed to two main factors: Firstly, E-GMA enhances the flexibility and deform-ability of the PLA matrix [38, 43, 68].”
Luyt, A. S., Antunes, A., Popelka, A., Mahmoud, A. A., Hassan, M. K., & Kasák, P. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51266 · Cited by 21
Effect of dicumyl peroxide on biodegradable poly(lactic acid)/functionalized gum arabic based films
Monika, Wani, K. M., & Katiyar, V. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51341 · Cited by 16
Ujčić, A., Fortelný, I., Krejčíková, S., Pavlová, E., Hodan, J., & Šlouf, M. (2022) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2022.18 · Cited by 16
Hong, S.-J., Kim, G. R., Kim, N., Shin, J., & Kim, Y. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02147 · Cited by 17
Crystallinity-Independent Toughness in Renewable Poly( l -lactide) Triblock Plastics
Krajovic, D. M., Haugstad, G. D., & Hillmyer, M. A. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02580 · Cited by 17
Doğancı, M. D., Doğancı, E., Balcı, H., & Çetįn, M. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55412 · Cited by 18
Liu, Y., & Dou, Q. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.139344 · Cited by 16
Yao, J., Zeng, Z., Bai, H., Zhang, Q., & Fu, Q. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100091 · Cited by 16
Yang, R., Cao, H., Li, C., Zou, G., Zhang, X., & Li, J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51413 · Cited by 16
Thananukul, K., Kaewsaneha, C., Sreearunothai, P., Petchsuk, A., Buchatip, S., Supmak, W., Nim, B., Okubo, M., & Opaprakasit, P. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00606 · Cited by 17
Wang, B., Liu, H., Ying, J., Liu, C., Shen, C., & Wang, Y. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2806-1 · Cited by 17
Zhang, J., Huang, S., Wang, J., Chen, C., Wang, H., Ye, L., & Li, Y. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c01921 · Cited by 17
Gross, I. P., Saatkamp, R. H., Sanches, M. P., Parize, A. L., & Pires, A. T. N. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01273 · Cited by 15
Implementation of Biodegradable Liquid Marbles as a Novel Controlled Release Fertilizer
McQuillan, R. V., Stevens, G. W., & Mumford, K. A. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c04605 · Cited by 15
Wu, H., Wu, H., Liu, Y., Hu, J., Zhang, N., Wu, X. B., Sun, Z., Wei, G., Chen, Y., Duan, Y., et al. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2023.110064 · Cited by 15
Chen, P., Chen, C., Mao, H., Dai, C., Su, C., Tsai, J.-C., & Lin, F. (2023) · Polymers · doi:10.3390/polym15234585 · Cited by 18
“According to previous reports [21,22], the current improvement of tough PLA was achieved through polymer blending, copolymerization, plasticization, or composite modifications.”
BackgroundMethodInfluentialImpact-Resistant PLLA/PBAT Composites Based on Novel Biobased Reactive Microcross-Linked PBAT
Xu, Y., Meng, X., You, X., Jiang, W., Du, P., Jiao, L., Li, C., Bao, B., & Xin, Z. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c04307 · Cited by 15
Kianifar, M., Azadi, M., & Heidari, F. (2025) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2025.108876 · Cited by 16
El-Aziz, M. E. A., Morsi, S. M. M., Hasanin, M. S., & Youssef, A. M. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100789 · Cited by 15
Li, C., Shi, B. W., Jiang, J., Lin, H., Xu, Y., Lin, S., Zhao, L., Meng, X., & Xi, Z. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00212 · Cited by 15
Malz, F., Arndt, J., Balko, J., Barton, B., Büsse, T., Imhof, D., Pfaendner, R., Rode, K., & Brüll, R. (2020) · Journal of Chromatography A · doi:10.1016/j.chroma.2020.461819 · Cited by 15
Recent advancement in polymer/halloysite nanotube nanocomposites for biomedical applications
Haneef, I. N. H. M., Shaffiar, N. M., Buys, Y. F., Shaharuddin, S. I. S., Hamid, A. M. A., & Widiyati, K. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35105 · Cited by 16
Zhao, X., Li, J., Yu, X., Yang, S., Liu, J., Zhou, W., & Peng, S. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107763 · Cited by 16
Self-citationFazli, A., & Rodrigue, D. (2022) · Molecules · doi:10.3390/molecules27206819 · Cited by 15
“It is of high importance to create internal rubber cavitation ahead of a crack and involve the matrix in the plastic deformation to delocalize the triaxial stress, leading to more impact energy dissipation, and to obtain rubber toughened plastic blends [18].”
BackgroundToughening polylactide with nonlinear, degradable analogues of PEG and its copolymers
Li, H., Yan, Y., jiang, X., Lin, J., & Li, M. (2022) · Polymer Chemistry · doi:10.1039/d2py01307j · Cited by 15
Zhang, Z., Wan, X., Fan, B., Ma, Y., & Yang, B. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c06160 · Cited by 15
Tailoring mechanical performance and biodegradability of poly(lactic acid) using renewable additives
Tessanan, W., Sutthikitivorakul, R., Klaykruayat, T., & Phinyocheep, P. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.145535 · Cited by 16
Injorhor, P., Inphonlek, S., Ruksakulpiwat, Y., & Ruksakulpiwat, Y. (2024) · Polymers · doi:10.3390/polym16060812 · Cited by 14
“Polymers 2024 , 16 , x FOR PEER REVIEW between PLA and MoNR [16,41].”
BackgroundAl‐Saleh, M. H., & El-Methaly, H. M. (2024) · Synthetic Metals · doi:10.1016/j.synthmet.2024.117592 · Cited by 14
Koh, S., Furutate, S., Imai, Y., Kanda, T., Tanaka, S., Tominaga, Y., Sato, S. A., & Taguchi, S. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07662 · Cited by 14
Development of a Three-Finger Adaptive Robotic Gripper to Assist Activities of Daily Living
Rahman, M. M., Shahria, M. T., Sunny, M. S. H., Khan, M. M. R., Islam, E., Swapnil, A. A. Z., Bedolla-Martínez, D., & Rahman, M. H. (2024) · Designs · doi:10.3390/designs8020035 · Cited by 15
“PLA, a thermoplastic polymer, demonstrates superior printability and strength when compared to acrylonitrile butadiene styrene (ABS), thermoplastic polyurethane (TPU), and nylon materials [30].”
BackgroundFDM printing of microneedles based on biocompatible and biodegradable thermoplastic polymers
Kouassi, M., Abdallah, A. B., Nouira, S., Ballut, S., Fitoussi, J., Shirinbayan, M., & Kallel, A. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56067 · Cited by 14
Ng, K. M. P., Tan, I. S., Foo, H. C. Y., Lau, S. Y., Lam, M. K., & Wong, M. K. (2024) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2024.105774 · Cited by 14
Najera-Losada, L., Rincón, P. C. N., Orjuela, Á., Gómez-Caturla, J., Fenollar, O., & Balart, R. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03415-1 · Cited by 16
Ye, H., Li, A., Li, G., Li, K., Zhang, J., Wang, D., Ray, S. S., Wang, H., & Li, Y. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01319 · Cited by 15
Qin, Z., He, Y., Tan, J., Chen, Z., Xie, Z., Xie, K., & Liu, Y. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.139689 · Cited by 15
Su, X., Jia, S., Cao, L., & Yu, D. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51014 · Cited by 14
Kajornprai, T., Suttiruengwong, S., & Sirisinha, K. (2021) · Polymers · doi:10.3390/polym13183066 · Cited by 14
“Although having high stiffness, biocompatibility, and biodegradability, PLLA has a relatively low heat resistance and is considered brittle for some applications requiring high mechanical strength levels, high resistance to tempera‐ ture, and good impact performance [1,2].”
BackgroundWang, H., Dong, A., Hu, K., Sun, W., Wang, J., Han, L., Mo, L., Li, L., Zhang, W., Guo, Y. F., et al. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac62e7 · Cited by 14
“Methods for the preparation and improvement of these materials are also emerging [1–5].”
Chen, K., Zhou, C. Y., Liu, H., & Wang, Y. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.132938 · Cited by 14
Morgado, G. F. D. M., de Moura, N. K., Martins, E. F., Escanio, C. A., Backes, E. H., Marini, J., & Passador, F. R. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03389-5 · Cited by 15
“Also, the immiscibility of the system is proven by the formation of two phases (PLA and TPU).”
BackgroundInfluentialAraujo, J. A., Azeem, M., Venkatesh, C., Mojićević, M., Fournet, M. B., & Attallah, O. A. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01466 · Cited by 14
Bijarimi, M., Ahmad, M. N., Abdullah, E. N., & Muzakkar, M. Z. (2023) · Indonesian Journal of Chemistry · doi:10.22146/ijc.80830 · Cited by 16
“As a result, several efforts have been made to alleviate the problem of toughness, particularly by melt mixing in the literatures [19-21].”
BackgroundDurability of biopolymeric composites formulated with fillers from a by‐product of coffee roasting
Sisti, L., Totaro, G., Rosato, A., Cionci, N. B., Gioia, D. D., Barbieri, L., & Saccani, A. (2021) · Polymer Composites · doi:10.1002/pc.26468 · Cited by 14
Yurtbasi, Z., Cinar, A. H., Sarisoy, F., & Kaşgöz, A. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57406 · Cited by 13
Murariu, M., Arzoumanian, T., Paint, Y., Murariu, O., Raquez, J., & Dúbois, P. (2022) · European Journal of Materials · doi:10.1080/26889277.2022.2113986 · Cited by 15
“…Ren, & Qiang, 2020), binary immiscible/miscible blends of PLA with other thermoplastics (Qu, Bu, Pan, & Hu, 2018; Samuel, Raquez, & Dubois, 2013; Zhao et al., 2020), multifunctional blends comprising more components (Hashima, Nishitsuji, & Inoue, 2010; Sangroniz, Gancheva, Favis, Müller, &…”
Boonluksiri, Y., Siangdang, P., Johns, J., & Nakaramontri, Y. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.119102 · Cited by 14
Yiow, R. V., Mansor, M. R., & Shaharuzaman, M. A. (2024) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2024.07.006 · Cited by 13
Strong and Stable Woody Triboelectric Materials Enabled by Biphase Blocking
Gao, C., Zhao, J., Liu, T., Luo, B., Chi, M., Zhang, S., Cai, C., Wang, J., Liu, Y., Shao, Y., et al. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c02802 · Cited by 13
Martínez, J. I., Quiles‐Carrillo, L., Muñoz, N. M., Dominici, F., Puglia, D., & Torre, L. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120675 · Cited by 14
Prasitnok, O., & Prasitnok, K. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00158 · Cited by 16
Lee, J., Hwang, G., Kwon, Y. S., & Jeong, Y. G. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100122 · Cited by 13
Rasanani, A. H., Kaffashi, B., Seyfi, J., & Ahmadi, S. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103188 · Cited by 13
Khabbaz, H. S., & Garmabi, H. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111043 · Cited by 13
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.