Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Items 301–400 of 473
Song, L., Yang, B., Tang, R., Hao, Y., Wang, W., Li, Y., Wang, Y., & Li, X. (2024) · Polymer · doi:10.1016/j.polymer.2024.127341 · Cited by 5
Fully biobased, ultra-tough lignin/polybutylene succinate composites through reactive extrusion
Yan, Q., Xue, B., Zhao, Q., Wang, W., Li, X., Zhao, Y., Wen, J., Meng, X., & Zhao, W. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120638 · Cited by 5
Advancements in biocompatible polymer-based antifouling coatings
Lin, H., Li, L., Lu, G.-Y., Yang, T.-S., Chen, R., Zhang, Y., & Zhang, Z.-H. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.111944 · Cited by 5
Chen, J., Wang, X., Huang, Y. T., Zhang, X., Sun, L. H., Lu, L., Li, X., Shen, L., Hong, J., Zhou, W., et al. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500033 · Cited by 5
Self-citationCai, K., Yang, A., Yu, C., Tu, S., & Feng, J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144943 · Cited by 8
Rajesh, K. A., Panicker, A. M., & Varghese, T. O. (2021) · Polymer Science Series A · doi:10.1134/s0965545x22030087 · Cited by 5
Feng, S., Zhao, W., He, J., & Zhang, Y. (2023) · Chemical Research in Chinese Universities · doi:10.1007/s40242-023-3160-8 · Cited by 5
Bio-based Polymers: A Mini ReviewPreprint
Yu, X. (2022) · ChemRxiv · doi:10.26434/chemrxiv-2022-1bnrm · Cited by 5
Self-citationLi, H., Li, R., Zhang, X., & Xing, Q. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6282 · Cited by 4
State of Research on Tissue Engineering with 3D Printing for Breast Reconstruction
Velasquez, G. D. D. S., Tanas, Y., Taraballi, F., Herzog, T., & Spiegel, A. J. (2025) · Journal of Clinical Medicine · doi:10.3390/jcm14196737 · Cited by 4
“It is prized for good mechanical properties but can be brittle and produce inflammatory acidic products upon degradation (69, 70).”
Overview on nanofillers and matrices of polymer and biopolymer nanocomposites
El-Aziz, M. E. A., & Morsi, S. M. M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-26625-6.00004-8 · Cited by 4
Xiao, W., Chen, X., Chen, H. S., Cheng, Y., Zhao, Z., Niu, X., Yongli, W., Tang, L., Ren, C., Zhang, K., et al. (2026) · Polymer science & technology. · doi:10.1021/polymscitech.5c00126 · Cited by 4
A review on graft compatibilizer for thermoplastic elastomer blend
Nitiyah, K. K., Musa, L., Rasidi, M. S. M., Rahim, S. Z. A., Rahman, R., Azmi, A. A., & Rennie, A. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2080/1/012003 · Cited by 4
Schwarz, D. B., & Eagan, J. M. (2022) · ACS symposium series · doi:10.1021/bk-2022-1412.ch010 · Cited by 4
Yokesahachart, C., Khanoonkon, N., & Yoksan, R. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137705 · Cited by 4
de Melo, E. C. R., Lona, L. M. F., & Vieira, R. P. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03447-7 · Cited by 5
“The PLA is a biologically sourced, compostable polyester achieved by the microbial fermentation of sugars, with properties that make it competitive with other fossil-based polymers such as polyethylene (PE) and polypropylene (PP) [ 42, 44].”
A scalable post-treatment method for modifying polylactic acid to create nanoporous polymers
Klassen, D., Karthikeyan, A., Simon, W., Mimoso, C., Badiali, T., Chouinard, G., Dumont, M., & Tavares, J. R. (2025) · Polymer · doi:10.1016/j.polymer.2025.128495 · Cited by 4
Biodegradable Elastomers: Where Is the Solution?
Shao, Y., Mallory, R. C., Dugas, M., Flanagan, C., Ligon, C., & Burks, G. (2025) · Chemistry - A European Journal · doi:10.1002/chem.202501440 · Cited by 5
Low-velocity impact response of novel hierarchical hexagonal multicell structures
Hafid, M., Nurrohmad, A., Hidayat, D., Ardiansyah, R., Marta, A., Rosalia, C. A., & Zaini, A. (2025) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2025.07.008 · Cited by 4
Astaneh, R. P., & Jahani, Y. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70074 · Cited by 4
“The toughness of a polymer can intensively increase in the case of plastic deformation under stress [11].”
InfluentialStudy on the mechanism of enlarged spherulite diameter for aliphatic polyester ionomers
Li, X., Ru, K., Zhang, S., & Chen, Y. (2022) · Polymer · doi:10.1016/j.polymer.2022.124759 · Cited by 4
Hao, C., Zheng, S., & Sun, S. (2022) · Polymer Engineering and Science · doi:10.1002/pen.26008 · Cited by 4
Synthesis and Characterization of Poly(DL-lactide) Containing Fluorene Structures
Yu, C.-F., Rwei, S., Yang, S., Tsen, W., & Lin, L. (2023) · Polymers · doi:10.3390/polym15112555 · Cited by 5
Eco-Friendly Biodegradable Materials for Industrial and Building Applications
Musioł, M., Ranote, S., Sikorska, W., Duale, K., & Kowalczuk, M. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15738-7.00045-3 · Cited by 3
Hajibabazadeh, S., Ghaleh, H., Mazidi, M. M., & Aghjeh, M. K. R. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27069 · Cited by 3
“27,36 The observation of a strong interaction between the PA11 particles and the PLA matrix in the micrographs in Figure 3 further confirms this statement.”
Peng, C., Xie, D., & Liu, H. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57608 · Cited by 3
Pang, Y., Li, Y., Ai, J., Tao, Y., Shen, J., Zheng, Y., & Guo, S. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c03586 · Cited by 3
Picco, C. M., Bastida, G. A., Tarrés, Q., Regenhardt, S. A., & Marc, D.-A. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149937 · Cited by 3
Amusa, A. A., Razali, N. I. M., Ali, F. B., Ismail, T. N. M. T., Azmi, A. S., & Jamaluddin, J. B. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.111878 · Cited by 3
Zhao, X., Mo, F., Yin, S., Yu, X., Zhou, W., & Peng, S. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14220-w · Cited by 3
“Polyamide 11 (PA11), as a biopolymer material with good toughness and strength, is an ideal materials for toughening and strengthening PLA [13, 14].”
Self-citationTaghinezhad, S. F., Mansourieh, M., Abbasi, A., Hesabi, M., Attallah, O. A., Major, I., & Pezzoli, R. (2025) · Polymer Engineering and Science · doi:10.1002/pen.70048 · Cited by 3
Sangthongyingdee, N., Low, D. Y. S., Rahim, A. H. B. A., Boonvisood, I., Tang, S. Y., & Soottitantawat, A. (2021) · Drying Technology · doi:10.1080/07373937.2021.1962906 · Cited by 3
“Such plastic deformation or plasticity would increase the toughness and absorb more fracture energy, thus increasing the crack growth resistance.([29]) This effect was deemed to greatly improve the impact strength of the PLA/PMMA-g-NR blend, particularly when 25 phr MMA concentration was used, as shown in Figure 9.”
BackgroundMethodLiu, H., Yan, Y., Cai, J., Bai, D., Liu, S., Wang, J., & Gao, G. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200338 · Cited by 3
Phongtamrug, S., Makhon, R., & Wiriyosuttikul, T. (2022) · Applied Science and Engineering Progress · doi:10.14416/j.asep.2022.02.008 · Cited by 3
Synthesis, Thermal and Mechanical Properties of Linear and Star Poly(L‐lactide)s
Nanok, T., Khanom, N., Hormnirun, P., Chansaenroch, C., & Laobuthee, A. (2023) · ChemistrySelect · doi:10.1002/slct.202301046 · Cited by 3
Ashoor, H. A., & Mohammed, A. A. (2024) · Iraqi Journal of Physics · doi:10.30723/ijp.v22i3.1241 · Cited by 3
Kumar, R., & Razdan, S. (2022) · Wiley eBooks · doi:10.1002/9781119800897.ch10 · Cited by 3
Baer, A. L., Clarke, R. W., Gowda, R. R., Hesse, S. A., Crowley, M., Xu, S., Hamernik, L. J., Curley, J. B., Urgun-Demirtas, M., Tassone, C. J., et al. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6c00712 · Cited by 2
Zhang, P., Su, J., & Han, J. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01548 · Cited by 2
New Biodegradable Polyester–Polyurethane Biocompositions Enriched by Urea
Zarzyka, I., Krzykowska, B., Hęclik, K., Frącz, W., Janowski, G., Bąk, Ł., Klepka, T., Bienias, J., Ostapiuk, M., Tor-Świątek, A., et al. (2025) · Materials · doi:10.3390/ma18163842 · Cited by 2
“PLA degrades relatively quickly under composting conditions; however, its brittle-ness and stiffness can be mitigated by incorporating PU as an elastomeric phase [20,32,33].”
Montoille, L., Álvarez-Carrasco, F., Guajardo, F., Gómez, M., Toro, E. L., Rivera, E., García-Herrera, C., Zapata, P. A., Triviño, D. Z., Martínez-Sanmiguel, J. J., et al. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c04166 · Cited by 2
Csézi, G., Mészáros, L., & Tábi, T. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06225-0 · Cited by 3
“This suggests that the finer, more uniform crystalline morphology at lower crystallization temperatures enhanced the effectiveness of EVA toughening mechanisms, such as shear yielding or debonding [35].”
Zhang, X. D., Wang, J., Li, R.-B., Hao, W., Dong, X., & Xing, Q. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111889 · Cited by 2
Hu, Z., Zhang, Y., Zhang, J., Cao, W., Liu, X., Lu, H., & Bao, J. (2026) · Polymer · doi:10.1016/j.polymer.2026.129577 · Cited by 2
Andrzejewski, J., Zdanowicz, M., Piasecki, A., Mietliński, P., & Barczewski, M. (2026) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2026.01.004 · Cited by 3
Priya, S. A., & Nevaditha, N. T. (2026) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2026.01.008 · Cited by 2
Jakab, S. K., Nagy, A. L., & Lendvai, L. (2026) · Polymers · doi:10.3390/polym18030339 · Cited by 2
“However, PLA is inherently brittle, which limits its use in applications that need high impact resistance and flexibility unless it is modified or blended [11].”
Yan, C., Li, P., Hou, D., Jiang, L., Luo, F., Meng, H., Zhang, K., Yin, B., Yang, W., & Yang, M. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c00126 · Cited by 2
Li, W., Dehghani, S., Li, B., & Srithep, Y. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70714 · Cited by 2
Klute, M., Piontek, A., Heim, H., & Kabasci, S. (2022) · International Polymer Processing · doi:10.1515/ipp-2021-4212 · Cited by 2
Mastalygina, E. E., Tyubaeva, P. M., Kiselev, N., & Попов, А. А. (2022) · Plasticheskie massy · doi:10.35164/0554-2901-2022-7-8-27-29 · Cited by 2
Ashkenazi, S., Matsanov, P., Nassar‐Marjiya, E., Farah, S., & Weitz, I. S. (2024) · ACS Omega · doi:10.1021/acsomega.3c10447 · Cited by 6
Zhang, X., Li, H., Li, R., Kan, C., Dong, X., Xing, Q., & Wang, Z. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2365280 · Cited by 2
“15] Additionally, PLA shows poor toughness due to its high glass transition temperature around 60°C. [16–21] These shortcomings limit the extensive utilization of PLA.”
Bhatt, S., & Bagchi, D. (2024) · Journal of Physics Condensed Matter · doi:10.1088/1361-648x/ad7faf · Cited by 4
Ishak, W. H. W., Rosli, N. A., Ahmad, I. B., Dufresne, A., Ahmad, S., Shahdan, D., & Sajab, M. S. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57391 · Cited by 2
Poly(Lactic Acid) Blends in Biomedical Applications
Bennie, R. B., Joel, C., Abraham, S. D., & Antony, A. J. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_2 · Cited by 2
The Effects of Blending Ratio of Poly(lactic acid)/POSS Cored Star Poly(ε-caprolactone) Biopolymers
Doğancı, M. D. (2020) · Journal of the Turkish Chemical Society Section A Chemistry · doi:10.18596/jotcsa.752190 · Cited by 2
“PLA is inherently fragile with very low elongation at break (EAB) and relatively low impact strength (5, 7, 19, 27, 28).”
BackgroundChen, X., Xia, T. D., Zhang, A., & Niu, X. (2020) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2020.1813947 · Cited by 2
Preparation and Characterization of Biodegradable Polyester-Based Shape-Memory Polymer
Rusli, N. W. M., Adrus, N., Jusoh, N., Hamidon, N. N., Leksano, A. A. B., Jamaluddin, J. B., & Samsudin, S. A. (2023) · Springer Proceedings in Materials · doi:10.1007/978-981-99-5567-1_25 · Cited by 2
Rheological Properties of poly(Lactic acid) Modified by Cellulose Acetate Propionate
Kimura, T., Takeuchi, T., Phulkerd, P., Pichaipanich, P., Kugimoto, D., Kouda, S., Kida, T., & Yamaguchi, M. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-03104-5 · Cited by 3
The Current Status and Prospects of Poly(Lactic Acid) Applications in Clinical Treatment
Yang, Z., Qiao, C., Liu, J., Qin, T., Gao, P., Chen, J., & Yin, G. (2024) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2024.3826 · Cited by 1
Analyzing the Biodegradation Susceptibility of Materials Based on Polylactic Acid
Podzorova, M. V., & Tertyshnaya, Y. V. (2024) · Polymer Science Series D · doi:10.1134/s1995421224701193 · Cited by 1
“As stated earlier [2, 3], owing to mixing of PLA with other biodegradable polymers such as PCL and polybutylene adipine terephthalate (PBAT), a much more accelerated biodegradation could be attained.”
Rakea, A. M., Tirkeş, S., Yıldız, Ü. H., Tirkeş, S., & Tayfun, Ü. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70206 · Cited by 1
Polymer/Rubber-Based Nanoblends
Imoisili, P. E. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_5 · Cited by 1
Polylactic Acid and Their Blends for Biomedical Application
Pérez, E., & Martini, R. E. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_9 · Cited by 1
Balancing Toughness and Antibacterial Activity of Polylactide Blends with Imidazolium-Based Polymers
Yook, J., Kang, Y., Park, J., & Lee, J. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00603 · Cited by 1
Suteja, T. J., Handoko, R., & Soesanti, A. (2025) · SINERGI · doi:10.22441/sinergi.2025.3.015 · Cited by 1
“Additionally, PLA, which has a rigid molecular structure, tends to exhibit brittle properties [31].”
Saha, S., Kumar, N. V., Enugula, S., Sudhakaran, S. V., Datla, A., Vadrevu, S., Rath, S. N., & Chameettachal, S. (2025) · Biofabrication · doi:10.1088/1758-5090/ae2d9d · Cited by 1
“Few studies have shown that PLA has high brittleness, which makes it inappropriate for load-bearing bone implants [60, 61].”
Chen, K., Liu, R., Sun, C., Zheng, D., Miao, Y., Zuo, Y., Tan, H., & Zhang, Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.166163 · Cited by 1
Zakizadeh, M., Jalali‐Arani, A., & Garmabi, H. (2025) · SPE Polymers · doi:10.1002/pls2.70028 · Cited by 1
Li, Y., Sun, S., Liu, D., Zhou, L., Zhang, L., Zhang, Q., Wang, Y., Shi, Y., Liu, L., & Song, L. (2026) · Reaction Chemistry & Engineering · doi:10.1039/d6re00084c · Cited by 1
Johar, M., Shafiq, M. D., & Rusli, A. (2026) · Journal of Polymer Research · doi:10.1007/s10965-026-04903-9 · Cited by 1
“Meanwhile, the impact strength of pristine PLA is only 3.41 kJ/m 2 since PLA is commonly reported to fail in a brittle manner [12].”
InfluentialKrajovic, D. M., Chayet, B. D., & Hillmyer, M. A. (2026) · ACS Central Science · doi:10.1021/acscentsci.6c00278 · Cited by 1
Altın, N., Darvishi, S., DEMİR, G. K., Salman, A. O., & Aytaç, A. (2026) · ACS Omega · doi:10.1021/acsomega.6c02664 · Cited by 2
“22,25 These blends retain biodegradability and are processed via conventional melt mixing, ensuring uniform dispersion without solvents or complex chemical modifications.”
Phase Organization and Circularity in PLLA/Vitrimer Semi-interpenetrating Polymer Networks
Gamberini, L., Giudice, A. D., Papadopoulos, L., Righetti, M. C., Hakkarainen, M., Galantini, L., Liguori, A., & Focarete, M. L. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00678 · Cited by 1
Park, J., Shin, M., 송지태, Seo, J., Park, J., Shin, K., Park, J., & 오동엽 (2026) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2026.106854 · Cited by 1
Zhou, Q., Ye, S., Ren, Y., Jing, M., & Wang, Y. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-13367-7 · Cited by 1
Preparation and Characterization of 2,3-Dialdehyde Cellulose/Polylactic Acid Biodegradable Blends
Şirin, K., SEZİŞ, Ü. G., & Ay, E. (2021) · El-Cezeri Fen ve Mühendislik Dergisi · doi:10.31202/ecjse.899815 · Cited by 1
Pandey, A. K., & Sakurai, S. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.97088 · Cited by 1
The effect of crystal region on the shape memory in polylactic acid matrix
Li, Y., Zhang, Y., Ouyang, J., Ye, J., & Cai, Z. (2022) · Physica Scripta · doi:10.1088/1402-4896/ac6d86 · Cited by 1
Simple generic picture of tensile toughness in solid polymer blends
Mukherji, D., Agarwal, S., de Oliveira, T. E., Ruscher, C., & Rottler, J. (2023) · Physical Review Materials · doi:10.1103/physrevmaterials.7.115601 · Cited by 1
Paszkiewicz, S., Kramek, G., Walkowiak, K., Irska, I., Piesowicz, E., Rzonsowska, M., Dudziec, B., & Barczewski, M. (2024) · Polimery · doi:10.14314/polimery.2023.11.3 · Cited by 1
Fundamentals and applications of ionic biopolymers
Askari, V. R., Roshani, R., Hatami, H., & Rahimi, V. B. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-96116-5.00021-1 · Cited by 1
Miscibility, crystallization and morphology in the novel polylactide/poly(4-hydroxybutyrate) blends
Yang, X., Luo, H., Zhou, R., Wei, C., Deng, J., Luo, J., Yan, X., Yu, K., Yuan, S., & Zhou, W. (2024) · Polymer · doi:10.1016/j.polymer.2024.127422 · Cited by 1
Self-citationDurability and Biodegradation of Biopolymers
Botlhoko, O. J., Nomadolo, N. E., Lekalakala, R., & Muniyasamy, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00051-x · Cited by 1
Staffa, L. H., Bettini, S. H. P., & Chinelatto, M. A. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108549 · Cited by 2
Inexpensive and readily available Ce2O3 and CeO2 catalyzed ring-opening polymerization of lactone
Yu, X., Gao, S., Shi, C., Song, R., & Wei, Z. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-04115-z · Cited by 1
“Therefore, PLA is considered renewable [3].”
Self-citationBian, X., Xia, G., Xin, J. H., & Jiang, S. (2024) · Polymers from Renewable Resources · doi:10.1177/20412479241283842 · Cited by 1
“16,17 PBAT is fossil-based but a fully biodegradable polymer that has high elongation at break and impact strength compared to other biopolymers.”
Tian, G., Zhu, Z., Li, B., & He, H. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04478-x · Cited by 1
3D-printable composites for magnetic refrigeration based on Ni-Mn-In-Co shape memory alloys
Khanna, D. L. R. (2023) · Academica-e (Universidad Pública de Navarra) · doi:10.48035/tesis/2454/46629 · Cited by 2
Adapting the OpenFlexure Microscope for Affordable Live-Cell ImagingPreprint
Malcolm, J. R., Physouni, O., Kelly, L. K., Carnielli, J. B. T., Macdonald, S. J., Bentley, M., Howarth, S. P., Lacy, S., Droop, A., Reilly, M., et al. (2026) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2026.02.02.703252 · Cited by 1
“PLA+ is a chemically modified polymer derivative of PLA, achieved by the blending of elastomers to enhance toughness and reduce the brittleness of the plastic 29 .”
Cobo, F. N., Guttuzzo, L., & de Carvalho, G. M. (2021) · Brazilian Journal of Development · doi:10.34117/bjdv7n2-360
Kerddonfag, N. (2021) · Journal of Hunan University Natural Sciences
Herencia, V. Z., Kaid, T., Tang, C., Ren, J., Lake, M., & Wang, L. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00244-3
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14 · Cited by 1
Liu, Q., Hong, Y., Wang, C., Liu, Y., & Liu, C. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5919 · Cited by 1
“20 Notably, naturally occurring aromatic eugenol has been employed as the feedstock to prepare a dual-functioning plasticizer with levulinic acid, for example, phenol-containing bio-plasticizer lowered the T g of the PLA system to 16 (cid:1) C, and inhibited the bacterial growth.”
Bolka, S., & Nardin, B. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.108572
Studies on the properties of different blending ratios of polypropylene and poly-lactide acid blends
Halim, N. H. A., Romli, A. Z., Yuhana, N. Y., & Zawawi, E. Z. E. (2023) · AIP conference proceedings · doi:10.1063/5.0126790
Krivoguz, Y. M., Шевченко, В. В., & Makarenko, O. (2023) · Polymer materials and technologies · doi:10.32864/polymmattech-2023-9-2-48-54
Wang, Y., Chen, J., & Chen, L. (2023) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2023.2281786
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.