Super tough poly(lactic acid) blends: a comprehensive review
Open accessThe DOI matches its Crossref record; 261 of the 261 references it cites were found in a registry or an index.
Abstract
PLA is a renewable, bio-based, and biodegradable aliphatic thermoplastic polyester that is considered a promising alternative to petrochemical-derived polymers in a wide range of commodity and engineering applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures















![Fig. 16 Notched impact strength of PLAs and PLA/EGMA blends [C: complete break, P: partial break]. Ref. 142, copyright 2009. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/570b6dcf3cb643b6843e73a4d3c3f745/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-16.jpg)








































![Fig. 57 TEM images of room-temperature notched surfaces of PLA-based materials containing 10 wt% of P[CL-co-LA] copolyester without silica nanoparticles (a), with 5 wt% (b and b′) and 10 wt% of silica nanoparticles (c and c′). Scale bar: 0.5 μm (a–c) and 100 nm (b'and c′). Ref. 260, copyright 2013. Reproduced with permission from Elsevier.](https://figures.cochat.ai/paper-figures/d3a74a25371d4ef0ba1d9bd1756379e9/super-tough-poly-lactic-acid-blends-a-comprehensive-review-figure-57.jpg)


Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It has also been reported that in brittle polymers, when multiple crazing mechanism dominates, the size of the dispersed phase in the matrix is about 2–3 μm.8”
From Toughening Poly(l-lactide) Blends: Effectiveness of Sequence-Controlled Six-Arm Star-Branched Block Copolymers of Poly(l-lactide) and Poly(ε-caprolactone) (2022) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“To overcome the brittleness of PLA, several strategies have been employed, such as copolymerization, 14 blending with softer (e.g.PCL) or rubber-like polymers, chemical modification, and the addition of additives.15,16”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [16]
The cited source says what the claim attributes to it.
In the citing paper
“PLA properties such as the Tg, melting temperature (Tm),5,8,9 crystallinity,10,11 hydrophilicity,12 and ductility13,14 are reported to be improved using this approach.”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Bio-nanocomposites for food packaging applications
Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.008 · Cited by 1,980
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Research works printed but not linked: 16
- L. T.Sin , A. R.Rahmat and W. A. W. A.Rahman , Polylactic Acid , William Andrew , 2012 , ch. 4, vol. 47 , pp. 1530–1542
- Yang, 2016, Sci. China: Chem., 59, 1355, 10.1007/s11426-016-0222-7 · DOI
- Lim, 2008, Prog. Polym. Sci., 33, 820, 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- Alias, 2019, Polym.-Plast. Technol. Mater., 58, 1
- Joziasse, 1994, Polym. Bull., 33, 599, 10.1007/BF00296170 · DOI
- Wang, 2009, Polym. Mater. Sci. Eng., 25, 45
- Xiao, 2011, Chem. Ind. Eng. Prog., 30, 578
- Liang, 1996, J. Appl. Polym. Sci., 59, 505, 10.1002/(SICI)1097-4628(19960118)59:3<505::AID-APP16>3.0.CO;2-S · doi:10.1002/(sici)1097-4628(19960118)59:3<505::aid-app16>3.0.co;2-s
- Feng, 2012, Chem. J. Chin. Univ., 33, 400
- Nie, 2015, China Synth. Resin Plast., 32, 59
- Liu, 2011, Macromolecules, 44, 1513, 10.1021/ma1026934 · DOI · Paper page
- Chen, 2015, Ind. Eng. Chem. Res., 54, 8723, 10.1021/acs.iecr.5b02195 · DOI
- Jiang, 2006, Biomacromolecules, 7, 199, 10.1021/bm050581q · DOI · Paper page
- Lin, 2012, Mater. Des., 36, 604, 10.1016/j.matdes.2011.11.036 · DOI · Paper page
- Urquijo, 2015, J. Appl. Polym. Sci., 132, 42641, 10.1002/app.42641 · DOI · Paper page
- Zaaba, 2019, Polym.-Plast. Technol. Mater., 1
Cited by
Items 201–300 of 473
Advances in continuous polymer analysis in flow with application towards biopolymers
Patterson, S. B. H., Wong, R., Barker, G., & Vilela, F. (2023) · Journal of Flow Chemistry · doi:10.1007/s41981-023-00268-y · Cited by 15
Mileo, P. G. M., Krauter, C. M., Sanders, J. M., Browning, A. R., & Halls, M. D. (2023) · ACS Omega · doi:10.1021/acsomega.3c04880 · Cited by 14
“4,7,8 Diverse alternatives have been employed in the last decades to enhance the toughness of PLA and achieve more balanced mechanical properties in this material, including plasticization, blending with other (bio)polymers, copolymerization, and incorporation of fillers.”
Polylactide/poly(vinyl monomer) block copolymers for specific applications
Bednarek, M., & Grabowski, M. (2024) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2024.2310105 · Cited by 15
Wu, Y., Lin, X., Li, J., Zhang, C., Liu, Y., Song, L., Hao, X., Lin, F., Wang, S., & Dong, T. (2021) · Materials · doi:10.3390/ma14174882 · Cited by 13
Melt spinning of PLA / PCL blends modified with electron induced reactive processing
Huang, Y., Brünig, H., Müller, M. T., & Wießner, S. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51902 · Cited by 14
Al‐Saleh, M. H., & Al-Shboul, T. S. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057221128189 · Cited by 13
“The relatively higher price and the incompetent mechanical and chemical properties of most BDPs compared to the conventional polymers are the most important reasons behind the limited use of the BDPs. Polylactic acid is on the top of the most promising BDPs.6 PLA is a thermoplastic that can be processed using conventi…”
BackgroundInfluentialCordeiro, E. S., Luna, C. B. B., da Silva, R. A., Wellen, R. M. R., de Carvalho, L. H., & Morais, D. D. D. S. (2023) · Journal of Elastomers & Plastics · doi:10.1177/00952443231177695 · Cited by 12
“To solve this problem and expand its applications, PLA has been modified by adding impact modifiers.(28) Given the importance of PLA for the polymer transformation industry, several studies(29-31) on mechanical, thermal, and rheological properties stand out, especially in expanding to the additive manufacturing sector.”
MethodYang, B., Fan, B., Wang, H., & Ma, Y. (2024) · Polymer · doi:10.1016/j.polymer.2024.126843 · Cited by 12
Wang, X., Zhao, W., Liu, H., Han, M., Zhang, C., Zhang, X., & Wang, F. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112993 · Cited by 12
Self-citationTosakul, T., Chanthot, P., & Pattamaprom, C. (2024) · Scientific Reports · doi:10.1038/s41598-024-69508-y · Cited by 15
Gigante, V., Gallone, G., Aliotta, L., & Lazzeri, A. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100953 · Cited by 12
Biodegradation Study of Potato Starch-Based Bioplastic
Kundu, R., & Payal, P. (2021) · Current Chinese chemistry · doi:10.2174/2666001601666210419110711 · Cited by 12
Pekdemir, M. E., Kaya, M., Coșkun, M., Aydogdu, Y., Kök, M., & Yalçın, Ş. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03679-6 · Cited by 12
“This leads to an increase in the pore size, which can be attributed to the large pores in the study [45].”
BackgroundSessini, V., Salaris, V., Oliver-Cuenca, V., Tercjak, A., Fiori, S., López, D., Kenny, J. M., & Peponi, L. (2024) · Polymers · doi:10.3390/polym16081107 · Cited by 11
“…this context, one of the most promising biodegradable polymer in the market, also produced by renewable resources, is the poly(lactic acid) (PLA) [2,3], an aliphatic thermoplastic polyester with several advantages such as biodegradability, biocompatibility, and compostability which promote its use…”
BackgroundDehghani, S., Salehiyan, R., Pholharn, D., Worajittiphon, P., & Srithep, Y. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57197 · Cited by 11
Mokoena, T. E., Mokoena, L. S., & Mofokeng, J. P. (2025) · Polymers · doi:10.3390/polym17172396 · Cited by 12
“In this regard, various methods, like polymer blending, copolymerisation, plasticiser use, and reinforcing fillers, have been employed to solve and minimise the shortcomings of PLA [18,26,42–44].”
InfluentialWannawitayapa, W., & Yoksan, R. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52693 · Cited by 11
Díez‐Rodríguez, T. M., Blázquez‐Blázquez, E., Barranco‐García, R., Pérez, E., & Cerrada, M. L. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200308 · Cited by 12
Wang, Z., Zhao, Y. Y., & Wei, Y. (2022) · RSC Advances · doi:10.1039/d2ra05051j · Cited by 11
de Melo, E. C. R., Lona, L. M. F., & Vieira, R. P. (2024) · Polymer Engineering and Science · doi:10.1002/pen.27073 · Cited by 12
“12,14 To overcome this, blending PLA with other polymers has been explored as a strategy to enhance mechanical performance.”
Mechanical Properties of Natural Material‐Based Packaging Films: Current Scenario
George, J., Navaf, M., Raju, A. P., Kumar, R., & Sunooj, K. V. (2023) · Wiley eBooks · doi:10.1002/9783527837304.ch13 · Cited by 15
Exploring the performance of bio-based PLA/PHB blends: A comprehensive analysis
Gao, L., & Drozdov, A. D. (2024) · Polymers from Renewable Resources · doi:10.1177/20412479241266954 · Cited by 10
“4,9 – 11 The following bio-based and/or biodegradable polymers have been successfully blended with PLA: poly(butylene succinate) (PBS), 12 poly(butylene succinate-co-adipate) (PBSA), 13 poly(butylene adipate-co-terephthalate) (PBAT), 14 poly( ϵ -caprolactone) (PCL), 15 poly(vinyl alcohol) (PVA), 16…”
Yao, X., Liu, M., Tang, Q., Zuo, Y., Liu, B., & Zhang, M. (2024) · Polymer Engineering and Science · doi:10.1002/pen.27004 · Cited by 10
Polyester transesterification through reactive blending and its applications: a comprehensive review
Leung, W. H., Leitao, E. M., & Verbeek, C. J. R. (2025) · Polymer · doi:10.1016/j.polymer.2025.128488 · Cited by 13
Kim, T., & Kim, S. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2526797 · Cited by 10
“Despite its popular usage, PLA is limited in medical and industrial applications because it is inherently brittle and insufficiently absorbs the collision energy, Figure S9 and Video S1 [44,45].”
Tsou, C., Luo, H., Qu, C.-L., Potiyaraj, P., Preuksarattanawut, C., Wu, C.-S., Du, J., Feng, S., & Ge, F. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.146683 · Cited by 11
Evaluation of Thermal Decomposition Kinetics of Poly (Lactic Acid)/Ethylene Elastomer (EE) Blends
Bernardes, G. P., Andrade, M. D. P., Poletto, M., Luiz, N. D. R., Santana, R. M. C., & Forte, M. M. D. C. (2023) · Polymers · doi:10.3390/polym15214324 · Cited by 10
“PLA blends with thermoplastic polyurethane (TPU), ethylene elastomers [17], polycarbonate (PC) [18], polyhydroxyalkanoate (PHA) [19], or PBAT [16], are commonly used for balancing the PLA rigidity–tenacity, allowing the production of materials with new properties and good reproducibility at low…”
BackgroundArslan, Ç., Erdem, A., Özmen, Ö., Tayfun, Ü., & Doğan, M. (2024) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.22160 · Cited by 10
“4,5 1,4 phenylene diisocyanate, 13 4,4-methylene diphenyl diiso-cyanate (MDI), 9,14,15 and polyurethane prepolymer 16 are used as compatibilizers in PLA/TPU blends.”
El‐Taweel, S. H., & Fathy, R. (2022) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2022.2098656 · Cited by 11
Delpouve, N., Faraj, H., Demarest, C., Dontzoff, E., Garda, M., Delbreilh, L., Berton, B., & Dargent, É. (2021) · Polymers · doi:10.3390/polym13142285 · Cited by 10
“As possible strategies to minimize these drawbacks, toughening agents have been added post-polymerization to the PLA matrix, thermoplastic elastomers, glycidyl esters, and polyolefins among others [5,6].”
BackgroundTunable self‐assembled stereocomplexed‐ polylactic acid nanoparticles as a drug carrier
Forouharshad, M., & Ajalloueian, F. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5510 · Cited by 10
Modification of Polylactide Nonwovens with Carbon Nanotubes and Ladder Poly(silsesquioxane)
Svyntkivska, M., Makowski, T., Piórkowska, E., Brzeziński, M., Herc, A. S., & Kowalewska, A. (2021) · Molecules · doi:10.3390/molecules26051353 · Cited by 11
Aydemir, D., Gümüş, H., Altuntaş, E., Yalçın, Ö. Ü., & Özan, Z. E. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6520 · Cited by 9
John, A., Črešnar, K. P., Stanley, J., Vohl, S., Makuc, D., Bikiaris, D. Ν., & Zemljič, L. F. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108707 · Cited by 10
Ding, Y., & Xin, Y. (2025) · Discover Nano · doi:10.1186/s11671-025-04223-9 · Cited by 9
“Among renewable polymers, polylactic acid (PLA) is attracting a lot of attention for several reasons [6].”
Formela, K., & Eyigöz, B. (2024) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2024.32 · Cited by 10
Ultra-Tough Polylactide/Bromobutyl Rubber-Based Ionomer Blends via Reactive Blending Strategy
Zhang, X., Xu, L., Huang, D., Ding, Y., Li, J., Dai, Z., Sun, L., Li, J., Wei, X., Wei, J., et al. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.923174 · Cited by 9
Omoniyi, Z. A., Liu, F., Yang, H., & Feng, X. (2025) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.70001 · Cited by 8
Development of biodegradable polymer nonwoven using green solvents and their applications: a review
Islam, M. T., Jahan, M. S., Hossen, M. A., Afroz, E. A., Saleem, M., Ashraf, H. T., Imran, H. M., Jinxing, W., Yu, B., Hussain, M., et al. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06003-y · Cited by 12
“It produces a homogenous single-phase substance with a single glass transition temperature, making it financially feasible and appealing to academic institutions and industry [154, 155].”
Qin, Z., He, Y., Chen, Z., Liao, X., Feng, J., Xie, K., Liu, W., & Liu, Y. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01538-0 · Cited by 9
“Polylactic acid (PLA) is a leading bio-sourced and biode-gradable polyester holding great promise for replacing conventional petroleum-based plastics [1, 2].”
Kowalewska, A., Herc, A. S., Bojda, J., Nowacka, M., Svyntkivska, M., Piórkowska, E., Kaczorowski, W., & Szymański, W. (2021) · Polymers · doi:10.3390/polym13071033 · Cited by 8
“Cavitation in PLA based blends, inside the inclusions of minor component or at the interface, was observed also by others [4,6,60].”
BackgroundVaradharajan, S., Vasanthan, K. S., & Agarwal, P. (2023) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0376 · Cited by 10
Haghjoo, S., Yeganeh, J. K., & Ghasemi, I. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6514 · Cited by 8
Goshtasbi, H., Awale, S., Amini‐Fazl, M. S., Fathi, M., Movafeghi, A., Barar, J., & Omidi, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135280 · Cited by 9
Exploring the effect of hemp fibers’ addition on the properties of PLA/PPAd biodegradable blends
Xanthopoulou, E., Pardalis, N., Zamboulis, A., & Bikiaris, D. Ν. (2024) · Sustainable Chemistry for the Environment · doi:10.1016/j.scenv.2024.100176 · Cited by 8
Yu, L., Qiu, Y., Yang, B., Gao, M., Song, L., Jing, Y., Chi, W., Wang, X., Zhang, L., Gao, J., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138554 · Cited by 8
Self-citationBiocomposites - Recent Advances
Elnashar, M. M. M., & Karakuş, S. (2022) · IntechOpen eBooks · doi:10.5772/intechopen.104003 · Cited by 10
Preparation of immiscible XSBR/PAM composite by constructing a leaf vein bionic nano-micro structure
Yang, S., Wu, Y., Bian, X., Liang, P., Jiao, Y., & Lin, C. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108028 · Cited by 8
Lai, W., & Liu, L. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12636-w · Cited by 9
“Various methods, including polymer blending, copolymerization, and the addition of organic or inorganic reinforcing fillers, have been investigated to toughen PLA [12–15].”
MethodSoleimani, A., Azizli, M. J., Barghamadi, M., Rezaeeparto, K., Parham, S., Kianfar, M. R., & Hashemi, M. (2024) · Composite Interfaces · doi:10.1080/09276440.2024.2310447 · Cited by 8
“Thus, some works have been done by blending PLA with natural rubber (NR) [4], modified NR [5], epoxidized NR (ENR) [6], and Silicone rubber [7].”
BackgroundElectrospun PLLA/PEI nanofibers for controlled drug release behaviors and antibacterial efficiency
Aghabeigi, E., Shabanloo, R., Akbari, S., & Aghaji, A. A. G. (2024) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2024.2322427 · Cited by 8
“[56] The tensile modulus of P85, P75, and P65 scaffolds also decreased with increasing PEI content.”
BackgroundGazzotti, S., Adolfsson, K. H., Hakkarainen, M., Farina, H., Silvani, A., & Ortenzi, M. A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111157 · Cited by 8
PROCESSING OF POLY(LACTIC ACID)
Lim, L., Vanyo, T., Randall, J., Cink, K., & Agrawal, A. K. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch13 · Cited by 11
Chen, R., Zhang, F., Lei, Y., Han, L., Zhang, Z. J., Zhang, X., & Fang, S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147517 · Cited by 7
Sustainable material management for a circular plastics economy
Lim, J. Y. C., Truong, T. N. B., Teo, J. Y. Q., Wang, C., & Li, Z. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91198-6.00010-3 · Cited by 12
Fernández‐Tena, A., Calafel, I., Otaegi, I., Guerrica‐Echevarría, G., Müller, A. J., & Aranburu, N. (2024) · Polymer · doi:10.1016/j.polymer.2024.126813 · Cited by 7
Lin, Z., Lu, Y., Wei, X., Huang, B., & Xu, C. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137907 · Cited by 7
Park, S. J., Lim, H., Lee, S. J., Im, S. H., Lee, J. M., Jung, Y., Kim, S. H., Shim, J.-S., Won, J., Chung, J. J., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01768 · Cited by 7
“6 Herein, we attempted to reduce the processing variables of the polymer blend using a stereocomplex polylactide (scPLA) made from isotactic PLLA and poly( D -lactide) (PDLA) to enhance the mechanical properties of PLA.”
Öge, T. Ö. (2025) · ACS Omega · doi:10.1021/acsomega.5c02538 · Cited by 7
“…most encountered issues in polymer blends produced via melt-compounding is the poor interaction at the interface of components resulting in poor miscibility and the low impact strength of the resultant blend 13 − 15 which can be tackled by catalyzing the interaction between the constituent phases.”
Toughened poly(lactic acid)/thermoplastic polyurethane uncompatibilized blends
Rodolfo, M. G., Costa, L., & Marini, J. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2021-0262 · Cited by 7
Zhang, H., Dong, C., Han, X., Han, Y., Zhao, F., Yan, N., Hu, Y., & Zhao, G. (2022) · Polymer Engineering and Science · doi:10.1002/pen.26007 · Cited by 7
Mechanical Properties of PLA/PCL Blends Compatibilized with PEG‐b‐PCL Multiblock Copolymer
Staffa, L. H., Bettini, S. H. P., & Chinelatto, M. A. (2022) · Macromolecular Symposia · doi:10.1002/masy.202200039 · Cited by 8
Role of Inorganic Fillers on the Physical Aging and Toughness Loss of PLLA/BaSO4 Composites
Larrañaga, X., Sarasua, J.-R., & Zuza, E. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02112 · Cited by 7
Molinari, G., Aliotta, L., Gemmi, M., Lazzeri, A., & Righetti, M. C. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108325 · Cited by 8
Al‐Senani, G. M., & Al‐Qahtani, S. D. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.124494 · Cited by 7
Luna, C. B. B., da Silva, F. S., Filho, E. A. D. S., Dantas, L. V. M., Schmitz, D. P., Soares, B. G., Wellen, R. M. R., & Araújo, E. M. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55931 · Cited by 7
Research hot spots and development trends of biodegradable plastics
Wang, N., Qian, D., Wang, X., Li, Y., Zheng, T., & Wang, Q. (2024) · Process Biochemistry · doi:10.1016/j.procbio.2024.12.018 · Cited by 7
Self-citationIncreased processing temperature assisted reactive toughening of poly(lactic acid)
Lukács, N., Decsov, K. E., Molnar, B. A., Ronkay, F., & Bocz, K. (2022) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2023.12 · Cited by 8
“…modulus of PLA are comparable with those of polystyrene (PS) and poly(ethylene Increased processing temperature assisted reactive toughening of poly(lactic acid) terephthalate) (PET), due to its brittleness, PLA has limitations in electric, electronic, and other industrial applications [4–6].”
BackgroundRelating Amorphous Structure to the Tear Strength of Polylactic Acid Films
Kobayashi, Y., Ishigami, A., & Itô, H. (2022) · Polymers · doi:10.3390/polym14101965 · Cited by 7
Gigante, V., Aliotta, L., Coltelli, M., & Lazzeri, A. (2022) · Polymers · doi:10.3390/polym14235058 · Cited by 7
Mandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Somnuake, P., Puttawong, P., & Wacharawichanant, S. (2024) · Advances in science and technology · doi:10.4028/p-d4crni · Cited by 6
“The previous shows the PLA ever blended with natural rubber [5], synthetic rubber [6], elastomer [7], and other polymers [8, 9].”
BackgroundBotlhoko, O. J., Makwakwa, D., & Muniyasamy, S. (2024) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2024.101228 · Cited by 6
Hsiao, M.-Y., & Nagai, K. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110997 · Cited by 6
Luna, C. B. B., Barreto, J. V. M., Filho, M. A. D. A., Bezerra, E. B., da Silva, F. U., Wellen, R. M. R., & Araújo, E. M. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56456 · Cited by 6
Li, Y., Qiu, Y., Wei, L., Yu, S., Liu, G., Yu, L., Gao, G., Gao, J., Huang, J., Wang, Y., et al. (2025) · Journal of Polymer Science · doi:10.1002/pol.20241182 · Cited by 6
Craze, A. R., Kerr, R. W. F., McGuire, T. M., Wille, L., & Williams, C. K. (2025) · Green Chemistry · doi:10.1039/d5gc02301g · Cited by 6
Kianifar, M., Azadi, M., & Heidari, F. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.08.025 · Cited by 6
Schippers, C., Gutmann, J. S., & Tsarkova, L. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16159 · Cited by 6
One-pot synthesis of liquid photocrosslinkable poly( l -lactide) with terminal triacrylate
Yu, C.-F., Rwei, S., & Shu, Y. (2023) · RSC Advances · doi:10.1039/d2ra05937a · Cited by 6
Kaveh, M., Yeganehzad, S., Hesarinejad, M. A., Kiumarsi, M., & Moghaddam, M. R. A. (2024) · Polymers · doi:10.3390/polym16111469 · Cited by 7
“In another In another investigation on the water-absorption behaviour of cellulose-reinforced PLA biocomposites, Penjumras et al. (2015) reported that water absorption increased with increasing cellulose content and exposure time [77].”
BackgroundGholami, R., Lawan, I., Ebrahimi, S., Pattulee, A., Ahn, C.-H., & Rimdusit, S. (2024) · Polymers · doi:10.3390/polym16162254 · Cited by 6
Barczewski, M., Aniśko, J., Hejna, A., Marć, M., Safandowska, M., Lewandowski, K., Ortega, Z., Mietliński, P., & Andrzejewski, J. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143969 · Cited by 6
PREPARATION, STRUCTURE, AND PROPERTIES OF STEREOCOMPLEX‐TYPE POLY(LACTIC ACID)
Mulchandani, N., Kimura, Y., & Katiyar, V. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch5 · Cited by 7
Wei, Y., Wang, Z., Zhou, S., & Li, Z. (2023) · Polymer · doi:10.1016/j.polymer.2023.125695 · Cited by 6
Feng, Y., Wang, C., Yang, J., Tan, T., & Yang, J. H. (2024) · ACS Omega · doi:10.1021/acsomega.3c07489 · Cited by 6
“14,15 − 18 Numerous approaches and advanced technologies have been employed to enhance the toughness of PLA, such as the utilization of plasticizers, copolymerization with specific chemicals, and the introduction of reinforcing fillers.”
MethodStage dependent strengthening of fused filament fabricated components
Patel, A. M., & Taufik, M. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.231 · Cited by 6
Bijarimi, M., Abdulsalam, Y., Norazmi, M., Normaya, E., Alhadadi, W., & Desa, M. S. Z. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.568 · Cited by 6
Accelerated hydrolytic degradation of poly(l-lactide) by blending with poly(ether-block-amide)
Cui, J., Chen, Z., & Lin, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135053 · Cited by 7
Liubimovskii, S. O., Novikov, V. S., ANOKHIN, E. V., Kuznetsov, S. M., Bakirov, A. V., Demina, V. A., Sedush, N. G., Чвалун, С. Н., Moskovskiy, M. N., Gudkov, S. V., et al. (2025) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2025.126018 · Cited by 5
Ding, Z., Tang, Z., An, X., & Guo, B. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27240 · Cited by 5
Kim, H.-L., Park, S.-Y., Rhim, J., Lee, H.-J., & Her, J.-Y. (2025) · International Journal of Polymer Science · doi:10.1155/ijps/5572473 · Cited by 6
“However, the application of PLA is limited by characteristics such as high crystallinity, signi fi cant brittleness, limited elongation at break (EB) (about 6%), reduced impact resistance, and poor thermal stability [14].”
Andrzejewski, J., Skórczewska, K., & Barczewski, M. (2025) · Polymers · doi:10.3390/polym17182454 · Cited by 5
Wen, B., Wang, G., Xu, R., Weng, C., & Yang, J. (2025) · Polymer · doi:10.1016/j.polymer.2025.129086 · Cited by 5
Sustainable Plastics: Effect of Bio-Based Plasticizer on Crystallization Kinetics of PLA
D’Amico, D. A., Manfredi, L. B., Marcovich, N. E., Mosiewicki, M. A., & Cyras, V. P. (2025) · Polymers · doi:10.3390/polym17212935 · Cited by 9
“These effects are often reflected in a decrease in the half-crystallization time (t 1 / 2 ) and an increase in the Avrami rate constant (k), evidencing faster nucleation and crystal growth kinetics [20,21].”
Tailored Thermal and Mechanical Performance of Biodegradable PLA ‐P( VDF ‐ TrFE ) Polymer Blends
Suresh, G., Satyanarayna, B., Thirmal, C., Jagarlamudi, K., Komala, T., Patowary, J., & Kumar, A. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70307 · Cited by 5
“Introducing 25% P(VDF-TrFE) into the PLA matrix results in a slight increase in both tensile strength (16.40 MPa) and strain (2.93%), suggesting initial improvements in inter-facial compatibility and load distribution [38].”
InfluentialMoreira, A. A., de Carvalho, F. A., Bilck, A. P., de Paula, M. T., Mali, S., Yamashita, F., & de Oliveira, A. L. M. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53815 · Cited by 5
Bio-Based PLA Membranes for Ion Transport and Ion Filtration
Sriram, M., Kadhirnilavan, K., Mohammed, K. A. N., Kumar, S. A., Mishra, A., & Tiwari, A. (2023) · Journal of Research Updates in Polymer Science · doi:10.6000/1929-5995.2023.12.21 · Cited by 6
“This polymer offers favorable characteristics like UV resistance, excellent processing capability, thermo-plasticity, and strong mechanical properties [10].”
BackgroundThe Impact of Water on Polylactide–Polybutylene Adipate Terephthalate Blends
Selezneva, L. D., Podzorova, M. V., Tertyshnaya, Y. V., Romanov, R. R., & Попов, А. А. (2024) · Russian Journal of Physical Chemistry B · doi:10.1134/s1990793124020167 · Cited by 6
Multari, C. R., & Pearson, R. A. (2024) · Polymer · doi:10.1016/j.polymer.2024.127235 · Cited by 5
Metadata
- Authors
- Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S.
- Affiliations
- Hubei Provincial Key Laboratory of Green Materials for Light Industry (CN)
- Corresponding author
- Zhao, Xipo
- Peng, Shaoxian
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2020
- Volume
- 10
- Issue
- 22
- Pages
- 13316-13368
- ISSN
- 2046-2069 (ISSN-L)
- PMC
- PMC9051451
- OpenAlex
- W3014340192
- Cited by
- 465
- References
- 260
- Citations by year
- 2026: 62 · 2025: 81 · 2024: 107 · 2023: 74 · 2022: 80 · 2021: 53 · 2020: 8
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- RSC Advances (publishedVersion, cc-by-nc)
- PubMed Central (publishedVersion, cc-by-nc)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (51273060)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- polylactic acid, polymer blends, toughening, blend morphology, particle size, interparticle distance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.