Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index; 11 of the 60 sources its claims cite were checked for support.

Tuning the local environment of atomic Pt shells of Pt 3 Fe@Pt nanoparticles enables energy-saving hydrogen production

Li, Shengnan, Xu, Qi, Sun, Benteng, Liu, Xuehui, Tian, He, Wang, Xinqiang, Xia, Haibing · 2026 · Journal of Materials Chemistry A

Abstract

Energy-saving hydrogen production is realized via coupling with the methanol oxidation reaction endowed with superior CO tolerance.

Overview

CoChat Summary

TL;DR

Core–shell Pt3Fe@Pt nanoparticles (~4.25 nm, ~2–3 atomic Pt shell layers) decorated with abundant O-bridged Fe single atoms on carbon were synthesized, tuning the local environment of the Pt shell. The catalyst delivers enhanced alkaline methanol oxidation (anti-CO poisoning) and alkaline hydrogen evolution, enabling MOR//HER-coupled water splitting at 0.574 V at 10 mA cm⁻² with ~100% Faradaic efficiency for H2.

Key findings

  • The CS Pt3Fe@Pt NP–O–A–Fe SA/C catalyst has an ECSA_CO of 89.14 m² g_Pt⁻¹ versus 39.02 m² g_Pt⁻¹ for commercial Pt/C, and its acidic CO stripping onset/peak potentials (0.620 V / 0.732 V) are more negative than Pt/C's (0.757 V / 0.865 V), indicating stronger CO removal.
  • For alkaline MOR, mass activity is 5.92 A mg_Pt⁻¹ and specific activity 6.64 mA cm⁻² — 3.79× and 1.72× higher than commercial Pt/C (1.56 A mg_Pt⁻¹, 3.86 mA cm⁻²); onset potential is 0.40 V vs 0.46 V. After CO-flux testing, MA recovered to 6.22 A mg_Pt⁻¹, higher than before the test.
  • For alkaline HER, η10 is 10 mV versus 40 mV for Pt/C (and 19 mV for the prior HDS Pt3Fe@Pt–O–Fe-SA NP/C catalyst); MA at −0.05 V is 1.31 A mg_Pt⁻¹ (3.74× Pt/C's 0.35) and Tafel slope is 33.30 mV dec⁻¹ versus 70.12 mV dec⁻¹.
  • In a two-electrode MOR//HER cell, 10 mA cm⁻² is reached at 0.574 V, 1.2 V lower than the OER//HER configuration (1.774 V), with Faradaic efficiency for H2 near 100% over three repeated tests. After 5000 ADT cycles η10 shifts only 8 mV (vs ~16 mV for Pt/C), and 86.79% of initial current is retained after 18000 s (vs 41.19% decay for Pt/C).

Methods

  • Synthesis: PANI-Fe(III) aerogels dispersed in water with K2PtCl4 (14.45 mM), stirred at 70 °C for 12 h, freeze-dried, pyrolyzed at 900 °C for 2 h in flowing Ar (10 °C min⁻¹), then acid-treated in 0.5 M H2SO4 at 80 °C for 8 h. The optimal sample used 96 mM Fe³⁺ (screened across 48–120 mM).
  • Characterization: TEM/HR-TEM, AC-HAADF-STEM and EDS mapping/line scans, XRD, Raman, CO stripping voltammetry, XPS (O 1s, Pt 4f), N2 adsorption–desorption.
  • Electrochemistry: alkaline MOR in N2-saturated 1.0 M KOH + 1.0 M CH3OH; alkaline HER in N2-saturated 1.0 M KOH; EIS, chronoamperometry, ADTs, and a symmetric two-electrode cell with the catalyst as both anode and cathode (MOR//HER vs OER//HER), with H2 quantified by GC.

Limitations

  • The paper states no explicit limitations section; the authors note that at the highest Fe³⁺ concentration (120 mM) Pt shell active sites become highly covered by O-bridged Fe SAs, which "may impair their catalytic activity," making 96 mM the optimum.
  • Evident from the text: performance benchmarking is against commercial Pt/C and the authors' own prior HDS catalyst, with broader comparisons relegated to supplementary tables; the local acidic environment during HER is inferred from structural analogy and operando Raman data placed in the SI; and all measurements are laboratory-scale half-cell and two-electrode tests, with no durability or scale-up data beyond 5000 ADT cycles and 18000 s chronoamperometry.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/d6ta01696k

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

8 Valid · 0 Not valid · 11 Not checked · 46 Own results and interpretations

32 more claims

Create a free account to see all 65 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 4
  • It may state two separate claims as one. 23
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Research works printed but not linked: 1

  1. Liu, 2020, Research, 2020, 9068270

Metadata

Authors
Li, S., Xu, Q., Sun, B., Liu, X., Tian, H., Wang, X., & Xia, H.
Affiliations
  • Shandong University (CN)
  • State Key Laboratory of Silicon Materials (CN)
Venue
Journal of Materials Chemistry A
Published
2026
Volume
14
Issue
36
Pages
23782-23792
ISSN
  • 2050-7488 (ISSN-L)
  • 2050-7496
OpenAlex
W7156242901
Cited by
0
References
82
FWCI
0.00
Type
journal article
Language
en
Open access
closed
Locations
Journal of Materials Chemistry A (publishedVersion)
Funders
  • National Natural Science Foundation of China (22072076, 22472086)
  • Shandong University
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
Keywords
platinum nanoparticles, methanol oxidation, CO tolerance, hydrogen production, electrocatalysis, energy-saving hydrogen production

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.