Cited by 2,122Quality and Supply ManagementManagement and Optimization TechniquesManagement Systems and Quality Improvement

The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.

Lean Thinking—Banish Waste and Create Wealth in your Corporation

Open access

Womack, J P, Jones, D T·1997·Journal of the Operational Research Society

DOI 10.1057/palgrave.jors.2600967

Open this paper in CoChat — free account

Abstract

Los procesos organizacionales están mediados por múltiples factores que inciden en su operatividad y determinan el alcance de sus propósitos, uno de estos factores es la estandarización, la cual, como campo de estudio de la ingeniería industrial examina la unificación de los procedimientos organizacionales, a fin de crear patrones de desempeño y establecer orientaciones sobre actividades y tiempos que componen cada proceso vinculado a la prestación de un servicio. Por tanto, el análisis de la cuestión se centró en proponer un modelo de gestión de procesos en la Universidad ECCI que, con fundamento en Lean thinking, permitiera estandarizar los tiempos de respuesta a las solicitudes y disminuir demoras en la solución de las peticiones; a partir de la consulta de la literatura disponible en distintas fuentes de carácter académico, ingenieril, investigativo y procedimental. La mencionada consulta y la aplicación de distintas herramientas de Lean Service permitió someter tres procesos de la IES a un modelo experimental organizado en Diagramas de flujo y DOP, para hacer efectivo el seguimiento mediante análisis de desempeño de los procesos, mapas VSM y Lean Six Sigma, con un enfoque particularizante en mudas y valor añadido. De esta manera, apoyados en el paradigma pospositivista en el que las realidades son susceptibles de reflexión y los resultados considerados como probablemente verdaderos y una propuesta metodológica descriptiva, los procesos objeto de estudio fueron plasmados…

Integrity signals

Registry

Crossref · 10.1057/palgrave.jors.2600967

Cites

8 of 8 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Images of Organization
Morgan, G. (1986) · Cited by 5,650
Los paradigmas de la investigación científica
Américas, U. D. L., & Ramos, C. A. (2015) · Avances en Psicología · doi:10.33539/avpsicol.2015.v23n1.167 · Cited by 178
Lean Service: Reassessment of Lean Manufacturing for Service Activities
Andrés, E. M., González-Requena, I., & Sanz-Lobera, A. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.12.463 · Cited by 125
Calidad en los servicios educativos
Senlle, A., & Gutiérrez, N. (2005) · Dialnet (Universidad de la Rioja) · Cited by 39
METODOLOGÍA DE LA INVESTIGACIÓN
Urréa, H. E. R., Cotto, J. J. R., Sánchez, J. L. O., Díaz, G. E. G., & Saldarriaga, G. (2022) · ACVENISPROH Académico · doi:10.47606/acven/aclib0017 · Cited by 33
Mejoras de Lean Manufacturing en los sistemas productivos
Tejeda, A. S. (2011) · Ciencia y Sociedad · doi:10.22206/cys.2011.v36i2.pp276-310 · Cited by 30
Using Hoshin Kanri to Improve the Value Stream
Cudney, E. A. (2013) · Productivity Press eBooks · doi:10.1201/b10246 · Cited by 29
EDUCATION FOR LEAN and LEAN FOR EDUCATION: A LITERATURE REVIEW
Vukadinovic, S., Djapan, M., & Mačužić, I. (2017) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.18421/ijqr11.01-03 · Cited by 21

Show all 8 references

Sorted by citations

Items 801–900 of 1,798

Lean implementation within manufacturing SMEs in Saudi Arabia: Organizational culture aspects
Alkhoraif, A. A., & McLaughlin, P. (2018) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2018.04.002 · Cited by 34
The analysis of COVID-19's Effects on Emergency Department-LOS using LSS approach and Machine Learning
Trunfio, T. A., Scala, A., & Improta, G. (2024) · International Conference on Medical and Health Informatics (ICMHI) · doi:10.1145/3673971.3674007 · Cited by 33
Implementing Lean Construction Theory into Construction Processes' Waste Management
Abbasian-Hosseini, S. A., Nikakhtar, A., Wong, K. Y., & Zavichi, A. (2012) · International Conference on Sustainable Design and Construction (ICSDC) · doi:10.1061/41204(426)52 · Cited by 33
Accounting for Lean Implementation in Government Enterprise
Labedz, C. S., & Gray, J. R. (2013) · International Journal of System Dynamics Applications · doi:10.4018/ijsda.2013010102 · Cited by 33
Center of Excellence for Lean Enterprise 4.0
Dombrowski, U., Wullbrandt, J., & Fochler, S. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.03.011 · Cited by 33
A review of improvement methods in manufacturing operations
Grünberg, T. (2003) · International Journal of Productivity and Performance Management · doi:10.1108/00438020310462890 · Cited by 33
Environmentally Lean Production: The Development and Incorporation of an Environmental Impact Index into Value Stream Mapping
Roosen, T. J., & Pons, D. J. (2013) · Journal of Industrial Engineering · doi:10.1155/2013/298103 · Cited by 33
Production control in precast fabrication: considering demand variability in production schedules
Ko, C. (2011) · Canadian Journal of Civil Engineering · doi:10.1139/l10-123 · Cited by 33
The Green Myth? Assessment of the Jatropha value chain and its potential for pro-poor biofuel development in Northern Tanzania
Messemaker, L. (2008) · Cited by 33
INVENTORY TURNOVER RATIO AS A SUPPLY CHAIN PERFORMANCE MEASURE
Rao, C. M., & Rao, K. P. (2009) · Cited by 33
Lean, agile and leagile healthcare management – A case of chronic care
Mishra, V., Samuel, C., & Sharma, S. (2018) · International Journal of Healthcare Management · doi:10.1080/20479700.2018.1428520 · Cited by 33
Military Airframe Acquisition Costs: The Effects of Lean Manufacturing
Cook, C. R., & Graser, J. C. (2001) · RAND Corporation eBooks · doi:10.7249/mr1325 · Cited by 33
Lean Production in the Japanese Shipbuilding Industry?
Koenig, P. C., Narita, H., & Baba, K. (2002) · Journal of Ship Production · doi:10.5957/jsp.2002.18.3.167 · Cited by 33
Business Models and Lean Startup
Zott, C., & Amit, R. H. (2024) · Journal of Management · doi:10.1177/01492063241228245 · Cited by 34
Identificação de oportunidades de pesquisa a partir de um levantamento da implantação da produção enxuta em empresas do Brasil e do exterior
Saurin, T. A., Ribeiro, J. L. D., & Marodin, G. A. (2010) · Gestão & Produção · doi:10.1590/s0104-530x2010000400015 · Cited by 33
Lean Thinking in the Digital Era
Cattaneo, L., Rossi, M., Negri, E., Powell, D. J., & Terzi, S. (2017) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-72905-3_33 · Cited by 33
Digital Obeya Room: exploring the synergies between BIM and lean for visual construction management
Nascimento, D. L. D. M., Caiado, R. G. G., Tortorella, G. L., Ivson, P., & Meiriño, M. J. (2018) · Innovative Infrastructure Solutions · doi:10.1007/s41062-017-0125-0 · Cited by 40
Meaningful inhibitors of the lean journey: a systematic review and categorisation of over 20 years of literature
Leite, H., Radnor, Z., & Bateman, N. (2020) · Production Planning & Control · doi:10.1080/09537287.2020.1823511 · Cited by 36
A Luhmannian Perspective on Strategy:Strategy as Paradox and Meta-communication
Rasche, A., & Seidl, D. N. (2020) · CBS Research Portal (Copenhagen Business School) · doi:10.1016/j.cpa.2017.03.004 · Cited by 33
Indoor Positioning Systems Can Revolutionise Digital Lean
Tran, T.-A., Ruppert, T., & Abonyi, J. (2021) · Applied Sciences · doi:10.3390/app11115291 · Cited by 36
Emergent barriers to the lean healthcare journey: baronies, tribalism and scepticism
Leite, H., Williams, S., Radnor, Z., & Bateman, N. (2022) · Production Planning & Control · doi:10.1080/09537287.2022.2054386 · Cited by 38
Systematic analysis of needs and requirements for the design of smart manufacturing systems in SMEs
Rauch, E., & Vickery, A. R. (2020) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwaa012 · Cited by 32
Lean Thinking for Knowledge Work
May, M. (2005) · Quality progress · Cited by 32
Based on material flow analysis: Value chain analysis of China iron resources
Yan, L., & Wang, A. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2014.07.010 · Cited by 32
Strategic manufacturing capability pursuance: a conceptual framework
Leung, S., & Lee, W. B. (2004) · Benchmarking An International Journal · doi:10.1108/14635770410532598 · Cited by 32
Lean thinking and its implications for public procurement: moving forward with assessment and implementation
Schiele, J. J., & McCue, C. P. (2011) · Journal of Public Procurement · doi:10.1108/jopp-11-02-2011-b003 · Cited by 32
Lean Production Development in SMEs: A Case Study
Majava, J., & Ojanperä, T. (2017) · Management and Production Engineering Review · doi:10.1515/mper-2017-0016 · Cited by 32
Measuring value‐leverage in aerospace supply chains
van Blokland, W. W. A. B., Fiksinski, Amoa, S. O. B., Santema, S. C., van Silfhout, G. ‐., & Maaskant, L. (2012) · International Journal of Operations & Production Management · doi:10.1108/01443571211253155 · Cited by 32
Integrating lean production strategies, virtual reality technique and building information modeling method for mass customization in cabinet manufacturing
Zhang, Y., Wang, J., Ahmad, R., & Li, X. (2021) · Engineering Construction and Architectural Management · doi:10.1108/ecam-11-2020-0955 · Cited by 21
Validation of the Lean Healthcare Implementation Self-Assessment Instrument (LHISI) in the finnish healthcare context
Reponen, E., Jokela, R. M., Blodgett, J. C., Rundall, T. G., Shortell, S. M., Nuutinen, M., Skants, N., Mäkijärvi, M. A., & Torkki, P. M. (2021) · BMC Health Services Research · doi:10.1186/s12913-021-07322-2 · Cited by 33
Digital twin driven smart product design framework
Zhang, M., Sui, F., Liu, A., Tao, F., & Nee, A. Y. C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818918-4.00001-4 · Cited by 35
An Improved Value Stream Mapping to Prioritize Lean Optimization Scenarios Using Simulation and Multiple-Attribute Decision-Making Method
Liu, Q., & Yang, H. (2020) · IEEE Access · doi:10.1109/access.2020.3037660 · Cited by 32
Mapping wastes in complex projects for Lean Product Development
Belvedere, V., Cuttaia, F., Rossi, M., & Stringhetti, L. (2019) · International Journal of Project Management · doi:10.1016/j.ijproman.2019.01.008 · Cited by 32
The Toyota Production System
Jylhä, T. (2021) · Routledge eBooks · doi:10.1201/9781003128786-13 · Cited by 32
Academic staff views of quality systems for teaching and learning: a Hong Kong case study
Jones, J. W., & SARAM, D. D. D. (2005) · Quality in Higher Education · doi:10.1080/13538320500074899 · Cited by 32
Fractal Design: Self-organizing Links in Supply Chain Management
西口, 敏., & Beaudet, A. (2000) · Palgrave Macmillan UK eBooks · doi:10.1007/978-1-349-62753-0_8 · Cited by 32
Community Operational Research: Innovations, internationalization and agenda-setting applications
Johnson, M. P., Midgley, G., Wright, J., & Chichirau, G. R. (2018) · European Journal of Operational Research · doi:10.1016/j.ejor.2018.03.004 · Cited by 31
A Qualitative Study on Employees’ Experiences of a Support model for Systematic Work Environment Management
Hellman, T., Molin, F., & Svartengren, M. (2019) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph16193551 · Cited by 31
A net present value assessment of make-to-order and make-to-stock manufacturing systems
Naim, M. M., Wikner, J., & Grubbström, R. W. (2005) · Omega · doi:10.1016/j.omega.2005.09.006 · Cited by 31
The development of a lean resource mapping framework: introducing an 8th waste
Gibbons, P. M., Kennedy, C., Burgess, S. C., & Godfrey, P. (2012) · International Journal of Lean Six Sigma · doi:10.1108/20401461211223704 · Cited by 31
Operations Management
Bititci, U., & Karamperidis, S. (2016) · Goodfellow Publishers Ltd eBooks · doi:10.23912/978-1-910158-78-4-2910 · Cited by 31
The effect of supply chain noise on the financial performance of Kanban and Drum-Buffer-Rope: An agent-based perspective
Regaliza, J. C. P., Costas, J., Ponte, B., Díez, R. P., & de la Fuente, D. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2018.11.009 · Cited by 31
Energy Cost Deployment (ECD): A novel lean approach to tackling energy losses
Braglia, M., Castellano, D., Gabbrielli, R., & Marrazzini, L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119056 · Cited by 29
Understanding and eliminating waste in Engineer-To-Order (ETO) projects: a multiple case study
Jünge, G. H., Alfnes, E., Nujen, B. B., Emblemsvåg, J., & Kjersem, K. (2021) · Production Planning & Control · doi:10.1080/09537287.2021.1903279 · Cited by 31
Reducing surgical cancellations: a successful application of Lean Six Sigma in healthcare
Schretlen, S., Hoefsmit, P. C., Kats, S., van Merode, G. G., Maessen, J. G., & Zandbergen, H. R. (2021) · BMJ Open Quality · doi:10.1136/bmjoq-2021-001342 · Cited by 31
A Lean Manufacturing Progress Model and Implementation for SMEs in the Metal Products Industry
Huang, C., Lee, D., Chen, S., & Tang, W. (2022) · Processes · doi:10.3390/pr10050835 · Cited by 31
GETTING THE MEASURE OF THE ELECTRONIC GAMES INDUSTRY: DEVELOPERS AND THE MANAGEMENT OF INNOVATION
Grantham, A., & Kaplinsky, R. (2005) · International Journal of Innovation Management · doi:10.1142/s136391960500123x · Cited by 31
Improving efficiency: time-critical interfacing of project tasks
Hameri, A., & Heikkilä, J. (2002) · International Journal of Project Management · doi:10.1016/s0263-7863(00)00044-2 · Cited by 31
Developing a Senior Healthcare Practice Using the Chronic Care Model: Effect on Physical Function and Health‐Related Quality of Life
Stock, R. D., Mahoney, E. R., Reece, D., & Cesario, L. (2008) · Journal of the American Geriatrics Society · doi:10.1111/j.1532-5415.2008.01763.x · Cited by 31
A Framework to Determine the Effectiveness of Maintenance Strategies Lean Thinking Approach
Irajpour, A., Fallahian-Najafabadi, A., Mahbod, M. A., & Karimi, M. P. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/132140 · Cited by 31
Medication reconciliation in the emergency department: opportunities for workflow redesign
Hummel, J., Evans, P. C., & Lee, H. (2010) · BMJ Quality & Safety · doi:10.1136/qshc.2009.035121 · Cited by 31
Lean talent management: a novel approach for increasing creativity in architectural design firms
Othman, A. A. E., & Khalil, M. H. M. (2018) · Engineering Construction & Architectural Management · doi:10.1108/ecam-07-2017-0139 · Cited by 31
The Lean Value Principle in Military Aerospace Product Development
Slack, R. A. (1999) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 31
Simulation and production planning for manufacturing cells
Taj, S., Cochran, D. S., Duda, J. W., & Linck, J. (1998) · NCSU Libraries Repository (North Carolina State University Libraries) · doi:10.5555/293172.293393 · Cited by 31
Investigating emergency room service quality using lean manufacturing
Abdelhadi, A. (2015) · International Journal of Health Care Quality Assurance · doi:10.1108/ijhcqa-01-2015-0006 · Cited by 31
Digital transformation of health services: a value stream-oriented approach
Tortorella, G. L., Fogliatto, F. S., Tlapa, D., Pepper, M., & Daniel Capurro, N. (2022) · International Journal of Production Research · doi:10.1080/00207543.2022.2048115 · Cited by 33
Integrating Theory of Constraints, Lean and Six Sigma: a framework development and its application
Gupta, M. C., Digalwar, A. K., Gupta, A. K., & Goyal, A. (2022) · Production Planning & Control · doi:10.1080/09537287.2022.2071351 · Cited by 38
Reducing Unplanned Extubations in the NICU Using Lean Methodology
Powell, B. M., Gilbert, E., & Volsko, T. A. (2016) · Respiratory Care · doi:10.4187/respcare.04540 · Cited by 31
Differentiating between detrimental and beneficial interruptions: a mixed-methods study
Myers, R. A., McCarthy, M. C., Whitlatch, A., & Parikh, P. J. (2016) · BMJ Quality & Safety · doi:10.1136/bmjqs-2015-004401 · Cited by 30
Lean manufacturing and Six Sigma based on Brazilian model “PNQ”
Campos, L. M. D. S. (2013) · International Journal of Lean Six Sigma · doi:10.1108/ijlss-08-2012-0007 · Cited by 30
Approach of the Two-way Influence Between Lean and Green Manufacturing and its Connection to Related Organisational Areas
Salvador, R., Piekarski, C. M., & de Francisco, A. C. (2017) · International journal of production management and engineering · doi:10.4995/ijpme.2017.7013 · Cited by 30
Elaborating factors affecting visual control in a big room
Majava, J., Haapasalo, H. J. O., & Aaltonen, K. (2019) · Construction Innovation · doi:10.1108/ci-06-2018-0048 · Cited by 37
Why is Quality Improvement so Challenging? A Viable Systems Model Perspective to Understand the Frustrations of Healthcare Quality Improvement Managers
Akmal, A., Podgorodnichenko, N., Foote, J., Greatbanks, R., Stokes, T., & Gauld, R. D. C. (2021) · Health Policy · doi:10.1016/j.healthpol.2021.03.015 · Cited by 30
Management Accountants in the United States: Practitioner and Academic Views of Recent Developments
Sorensen, J. E. (2008) · Handbooks of management accounting research · doi:10.1016/s1751-3243(07)03004-0 · Cited by 30
Investigating the implications of extending synchronized sequencing in automotive supply chains: the case of suppliers in the European automotive sector
Mondragón, A. E. C., & Lyons, A. C. (2008) · International Journal of Production Research · doi:10.1080/00207540601055466 · Cited by 30
Supply chain management in the fishing industry: the case of Iceland
Hameri, A., & Pálsson, J. (2003) · International Journal of Logistics Research and Applications · doi:10.1080/1367556031000123098 · Cited by 30
Lean management as a countermeasure for “Normal” disruptions
Marley, K. A., & Ward, P. T. (2013) · Operations Management Research · doi:10.1007/s12063-013-0077-2 · Cited by 30
Lean and Agile Construction Project Management: As a Way of Reducing Environmental Footprint of the Construction Industry
Sertyeşilışık, B. (2014) · International series on intelligent systems, control and automation: science and engineering · doi:10.1007/978-94-017-8044-5_11 · Cited by 30
A Conceptual Model for a Safety-Based Theory of Lean Construction
Moaveni, S., Banihashemi, S. Y., & Mojtahedi, M. (2019) · Buildings · doi:10.3390/buildings9010023 · Cited by 30
Coordination of teams, meetings, and managerial processes in construction projects: using a lean and complex adaptive mechanism
Zegarra, O., & Alarcón, L. F. (2019) · Production Planning & Control · doi:10.1080/09537287.2019.1578905 · Cited by 30
Performance measurement system for lean manufacturing: a perspective from SMEs
Anand, G., & Kodali, R. (2008) · International Journal of Globalisation and Small Business · doi:10.1504/ijgsb.2008.018101 · Cited by 30
Simulation of Construction Processes: Traditional Practices Versus Lean Principles
Al‐Sudairi, A. A., Diekmann, J. E., Songer, A. D., & Brown, H. M. (1999) · Cited by 30
Business Strategy Formulation: Theory, Process, and the Intellectual Revolution
Ulwick, A. W. (1999) · Cited by 30
Comparative Analysis among Discrete Fourier Transform, K-Means and Artificial Neural Networks Image Processing Techniques Oriented on Quality Control of Assembled Tires
Massaro, A. S., Dipierro, G., Cannella, E., & Galiano, A. M. (2020) · Information · doi:10.3390/info11050257 · Cited by 31
Influence of lean construction wastes on the transformation-flow-value process of construction
Igwe, C., Hammad, A., & Nasiri, F. (2020) · International Journal of Construction Management · doi:10.1080/15623599.2020.1812153 · Cited by 30
Development of Lean Manufacturing Implementation Framework in Machinery and Equipment SMEs
Yuik, C. J., & Perumal, P. A. (2020) · International Journal of Industrial Engineering and Management · doi:10.24867/ijiem-2020-3-261 · Cited by 30
A Lean and Green approach for the eco-efficiency assessment on construction sites: description and case study
Rezende, M. O. D. O., Saade, M., Nunes, A. O., da Silva, V. G., Moris, V. A. S., & Silva, D. A. L. (2022) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02265-y · Cited by 26
Economic and social effects of novel supply chain concepts and virtual enterprises
Kovács, G., & Kot, S. (2017) · JOURNAL OF INTERNATIONAL STUDIES · doi:10.14254/2071-8330.2017/10-1/17 · Cited by 30
Lean First, Then Automate: An Integrated Model for Process Improvement in Pure Service-Providing Companies
Bortolotti, T., Romano, P., & Nicoletti, B. (2010) · IFIP International Federation for Information Processing/IFIP · doi:10.1007/978-3-642-16358-6_72 · Cited by 30
Benchmarking sobre manufactura esbelta (lean manufacturing) en el sector de la confección en la ciudad de Medellín, Colombia
Departamento de Ingeniería de Producción, U. E., Posada, J. G. A., Botero, V. E., Ingeniera de Producción. Universidad EAFIT, M.-C., Martínez, M. J. R., & Ingeniera de Producción. Universidad EAFIT, M.-C. (2010) · Cuadernos de difusión · doi:10.46631/jefas.2010.v15n28.06 · Cited by 30
Manufacturing paradigms in Supply Chain Management
Duarte, S., & Machado, V. A. C. (2011) · International Journal of Management Science and Engineering Management · doi:10.1080/17509653.2011.10671181 · Cited by 34
Value Delivery through Product Offers: A Lean Leap in Multi-Storey Timber Housing Construction
Björnfot, A., & Stehn, L. (2007) · Lean Construction Journal · doi:10.60164/37d7h3d2i · Cited by 30
Lean Six Sigma and marketing: a missed opportunity
Chaplin, L., & O’Rourke, S. T. J. (2014) · International Journal of Productivity and Performance Management · doi:10.1108/ijppm-09-2013-0155 · Cited by 29
Process Cycle Efficiency Improvement Through Lean: A Case Study
Mohanram, P. V., Rajentbirakumar, D., & Harikarthik, S. G. (2011) · International journal of lean thinking : · Cited by 29
Engineering change management maturity assessment model with lean criteria for automotive supply chain
Tavčar, J., Demšar, I., & Duhovnik, J. (2018) · Journal of Engineering Design · doi:10.1080/09544828.2018.1463513 · Cited by 29
Modeling, Assessment and Design of an Emergency Department of a Public Hospital through Discrete-Event Simulation
Castanheira-Pinto, A., Gonçalves, B. S. F., Lima, R. M., & Dinis‐Carvalho, J. (2021) · Applied Sciences · doi:10.3390/app11020805 · Cited by 29
Lean Optimization Techniques for Improvement of Production Flows and Logistics Management: The Case Study of a Fruits Distribution Center
Proença, A. P., Gaspar, P. D., & Lima, T. M. (2022) · Processes · doi:10.3390/pr10071384 · Cited by 29
The Missing Link: Lean Leadership
Mann, D. (2023) · Frontiers of Health Services Management · doi:10.1097/hap.0000000000000181 · Cited by 29
Lean product engineering in the South African automotive industry
Mund, K., Pieterse, K., & Cameron, S. (2015) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-05-2013-0062 · Cited by 29
Digital Eco-Sense: Sustainability and ICT – a new Terrain for Innovation
Ryan, C., & Fleming, D. (2004) · Lund University Publications (Lund University) · Cited by 29
Lean transformation in a high mix low volume electronics assembly environment
Raghavan, V. A., Yoon, S. W., & Srihari, K. (2014) · International Journal of Lean Six Sigma · doi:10.1108/ijlss-07-2013-0042 · Cited by 29
Understanding Supply Chains
Flott, L. (2001) · Metal Finishing · doi:10.1016/s0026-0576(01)81219-8 · Cited by 29
The Production System Design and Deployment Framework
Cochran, D. S. (1999) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/1999-01-1644 · Cited by 29
Management of Technology and Innovation in Japan
Herstatt, C., Tschirky, H. P., Stockstrom, C., & Nagahira, A. (2006) · Springer eBooks · doi:10.1007/3-540-31248-x · Cited by 29
Construction Supply Chains: Turkish Supply Chain Configurations for Cut and Bent Rebar
Polat, G., & Ballard, G. (2003) · Cited by 29
The NHS: feeling well and thriving at 75
Berwick, D. (1998) · BMJ · doi:10.1136/bmj.317.7150.57 · Cited by 29
Integrating Lean Design and Lean Construction: Processes and methods
Jørgensen, B. H. (2006) · Cited by 29
Industry 4.0 technologies integration with lean production tools: a review
Singh, H., & Singh, B. (2023) · The TQM Journal · doi:10.1108/tqm-02-2022-0065 · Cited by 29
Targeting lean process improvement projects for maximum financial impact
Darlington, J., Francis, M., Found, P. A., & Thomas, A. J. (2015) · Production Planning & Control · doi:10.1080/09537287.2015.1082665 · Cited by 29
Pathways of lean manufacturing in wood and furniture industries: a bibliometric and systematic review
Abu, F., Gholami, H., Saman, M. Z. M., Zakuan, N., Sharif, S., & Štreimikienė, D. (2021) · European Journal of Wood and Wood Products · doi:10.1007/s00107-021-01713-2 · Cited by 29

Authors: Womack, J. P., & Jones, D. T.
Venue: Journal of the Operational Research Society
Publisher: Informa UK Limited
Published: 1997-11-01
Volume: 48
Issue: 11
Pages: 1148-1148
ISSN: 0160-5682 (ISSN-L)
1476-9360
DOI: 10.1057/palgrave.jors.2600967
OpenAlex: W4230227413
Cited by: 2,122
References: 8
Citations by year: 2026: 57 · 2025: 127 · 2024: 125 · 2023: 180 · 2022: 164 · 2021: 171 · 2020: 263 · 2019: 150 · 2018: 146 · 2017: 120 · 2016: 114 · 2015: 85 · 2014: 75 · 2013: 82 · 2012: 50
FWCI: 9.83
Type: journal article
Language: en
Open access: green
repositorio.ecci.edu.co
Licence: cc-by-nc-sa
doi.org/10.1080/policies-text-data-mining (tdm)
Locations: Journal of the Operational Research Society (publishedVersion)
Repositorio Digital Universidad ECCI (submittedVersion, cc-by-nc-sa)
Topics: Social Sciences › Business, Management and Accounting › Management Information Systems › Quality and Supply Management
Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques
Social Sciences › Business, Management and Accounting › Strategy and Management › Management Systems and Quality Improvement
Keywords: lean thinking, lean service, waste elimination, value added, process standardization, response time reduction, value stream mapping, Lean Six Sigma, process management model, educational service quality

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Lean Thinking—Banish Waste and Create Wealth in your Corporation

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Citations

Cites

Cited by

Related

Metadata

Record

About these checks