Highly efficient separation of carbon dioxide by a metal-organic framework replete with open metal sites
Open accessThe DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
Selective capture of CO 2 , which is essential for natural gas purification and CO 2 sequestration, has been reported in zeolites, porous membranes, and amine solutions. However, all such systems require substantial energy input for release of captured CO 2 , leading to low energy efficiency and high cost. A new class of materials named metal-organic frameworks (MOFs) has also been demonstrated to take up voluminous amounts of CO 2 . However, these studies have been largely limited to equilibrium uptake measurements, which are a poor predictor of separation ability, rather than the more industrially relevant kinetic (dynamic) capacity. Here, we report that a known MOF, Mg-MOF-74, with open magnesium sites, rivals competitive materials in CO 2 capture, with 8.9 wt. % dynamic capacity, and undergoes facile CO 2 release at significantly lower temperature, 80 °C. Mg-MOF-74 offers an excellent balance between dynamic capacity and regeneration. These results demonstrate the potential of MOFs with open metal sites as efficient CO 2 capture media.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Self-citationRod Packings and Metal−Organic Frameworks Constructed from Rod-Shaped Secondary Building Units
Rosi, N. L., Kim, J., Eddaoudi, M., Chen, B., O'Keeffe, M., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja045123o · Cited by 2,496
Self-citationRowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Self-citationCaskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Colossal cages in zeolitic imidazolate frameworks as selective carbon dioxide reservoirs
Wang, B., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2008) · Nature · doi:10.1038/nature06900 · Cited by 1,581
Self-citationBanerjee, R., Furukawa, H., Britt, D., Knobler, C., O’Keeffe, M., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809459e · Cited by 1,443
Self-citationZeolite A imidazolate frameworks
Hayashi, H., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2007) · Nature Materials · doi:10.1038/nmat1927 · Cited by 1,011
Self-citationAn Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
Cited by
Items 101–160 of 160
Recent progress on desiccant materials for solid desiccant cooling systems
Zheng, X., Ge, T. S., & Wang, R. Z. (2014) · Energy · doi:10.1016/j.energy.2014.07.027 · Cited by 337
Highly Selective Carbon Dioxide Sorption in an Organic Molecular Porous Material
Kim, H., Kim, Y., Yoon, M., Lim, S., Park, S. M., Seo, G., & Kim, K. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105211w · Cited by 335
CO2 Dynamics in a Metal–Organic Framework with Open Metal Sites
Kong, X., Scott, E., Ding, W., Mason, J. A., Long, J. R., & Reimer, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306822p · Cited by 335
Rational strategies for proton-conductive metal–organic frameworks
Lim, D.-W., & Kitagawa, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00004g · Cited by 334
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03534c · Cited by 334
In silico screening of metal–organic frameworks in separation applications
Krishna, R., & van Baten, J. M. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp20282k · Cited by 333
CD-MOF: A Versatile Separation Medium
Hartlieb, K. J., Holcroft, J. M., Moghadam, P. Z., Vermeulen, N. A., Algaradah, M. M., Nassar, M. S., Botros, Y. Y., Snurr, R. Q., & Stoddart, J. F. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b12860 · Cited by 323
Allosteric Supramolecular Triple-Layer Catalysts
Yoon, H. J., Kuwabara, J., Kim, J.-H., & Mirkin, C. A. (2010) · Science · doi:10.1126/science.1193928 · Cited by 321
Carbon Dioxide Capture Using Ionic Liquid 1-Butyl-3-methylimidazolium Acetate
Shiflett, M. B., Drew, D. W., Cantini, R. A., & Yokozeki, A. (2010) · Energy & Fuels · doi:10.1021/ef100868a · Cited by 321
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Nanosize Zr-metal organic framework (UiO-66) for hydrogen and carbon dioxide storage
Abid, H. R., Tian, H., Ang, H.-M., Tade, M. O., Buckley, C. E., & Wang, S. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.104 · Cited by 316
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
Wu, H., Simmons, J. M., Srinivas, G., Zhou, W., & Yildirim, T. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100558r · Cited by 304
Carbon dioxide adsorption based on porous materials
Sai Bhargava Reddy, M., Ponnamma, D., Sadasivuni, K. K., Kumar, B., & Abdullah, A. M. (2021) · RSC Advances · doi:10.1039/d0ra10902a · Cited by 300
CO2 Capture in Metal–Organic Framework Adsorbents: An Engineering Perspective
Hu, Z., Wang, Y., Shah, B. B., & Zhao, D. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201800080 · Cited by 297
Abscheidung von Kohlendioxid: Perspektiven für neue Materialien
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie · doi:10.1002/ange.201000431 · Cited by 291
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Mohanty, P., Kull, L. D., & Landskron, K. (2011) · Nature Communications · doi:10.1038/ncomms1405 · Cited by 282
CO 2 capture from humid flue gases and humid atmosphere using a microporous coppersilicate
Datta, S. J., Khumnoon, C., Lee, Z. H., Moon, W. K., Docao, S., Nguyen, T. H., Hwang, I. C., Moon, D., Oleynikov, P., Terasaki, O., et al. (2015) · Science · doi:10.1126/science.aab1680 · Cited by 282
Sen, S., Nair, N. N., Yamada, T., Kitagawa, H., & Bharadwaj, P. K. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3076378 · Cited by 280
Xue, D.-X., Wang, Q., & Bai, J. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.10.026 · Cited by 280
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Schejn, A., Aboulaich, A., Balan, L., Falk, V., Lalevée, J., Medjahdi, G., Aranda, L., Mozet, K., & Schneider, R. (2015) · Catalysis Science & Technology · doi:10.1039/c4cy01505c · Cited by 277
Liu, D., Lang, J.-P., & Abrahams, B. F. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203053y · Cited by 277
Smith, G. L., Eyley, J. E., Han, X., Zhang, X., Li, J., Jacques, N. M., Godfrey, H. G. W., Argent, S. P., McCormick McPherson, L. J., Teat, S. J., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0495-0 · Cited by 274
Sequencing of metals in multivariate metal-organic frameworks
Ji, Z., Li, T., & Yaghi, O. M. (2020) · Science · doi:10.1126/science.aaz4304 · Cited by 272
Self-citationKim, J., Yang, S.-T., Choi, S. B., Sim, J., Kim, J., & Ahn, W.-S. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03318a · Cited by 270
Kapelewski, M. T., Geier, S. J., Hudson, M. R., Stück, D., Mason, J. A., Nelson, J. N., Xiao, D. J., Hulvey, Z., Gilmour, E., FitzGerald, S. A., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506230r · Cited by 270
Carbon capture by absorption – Path covered and ahead
Sreedhar, I., Nahar, T., Venugopal, A., & Srinivas, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.109 · Cited by 261
In Situ Monitoring and Mechanism of the Mechanochemical Formation of a Microporous MOF-74 Framework
Julien, P. A., Užarević, K., Katsenis, A. D., Kimber, S. A. J., Wang, T., Farha, O. K., Zhang, Y., Casaban, J., Germann, L. S., Etter, M., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13038 · Cited by 252
He, Y., Zhang, Z., Xiang, S., Fronczek, F. R., Krishna, R., & Chen, B. (2012) · Chemical Communications · doi:10.1039/c2cc31792c · Cited by 246
Liu, Q., Ning, L., Zheng, S., Tao, M., Shi, Y., & He, Y. (2013) · Scientific Reports · doi:10.1038/srep02916 · Cited by 238
New Metal–Organic Frameworks for Chemical Fixation of CO2
Nguyen, P. T. K., Nguyen, H. T. D., Nguyen, H. N., Trickett, C. A., Ton, Q. T., Gutiérrez-Puebla, E., Monge, M. A., Cordova, K. E., & Gándara, F. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16163 · Cited by 237
Ammonia adsorption and its effects on framework stability of MOF-5 and MOF-177
Saha, D., & Deng, S. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.04.078 · Cited by 235
Recent Advances in s-Block Metal Carboxylate Networks
Banerjee, D., & Parise, J. B. (2011) · Crystal Growth & Design · doi:10.1021/cg2008304 · Cited by 222
Zhao, Y., Liu, X., Yao, K. X., Zhao, L., & Han, Y. (2012) · Chemistry of Materials · doi:10.1021/cm303072n · Cited by 221
He, Y., Zhang, Z., Xiang, S., Fronczek, F. R., Krishna, R., & Chen, B. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201102734 · Cited by 221
Li, T., Chen, D.-L., Sullivan, J. E., Kozlowski, M. T., Johnson, J. K., & Rosi, N. L. (2013) · Chemical Science · doi:10.1039/c3sc22207a · Cited by 217
Carbon dioxide capturing technologies: a review focusing on metal organic framework materials (MOFs)
Sabouni, R., Kazemian, H., & Rohani, S. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-2406-2 · Cited by 216
“75 bar) 44 303 Britt et al. (2009)”
Insights into Adsorption of NH3 on HKUST-1 Metal–Organic Framework: A Multitechnique Approach
Borfecchia, E., Maurelli, S., Gianolio, D., Groppo, E., Chiesa, M., Bonino, F., & Lamberti, C. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp305756k · Cited by 216
Foo, G. S., Lee, J. J., Chen, C., Hayes, S. E., Sievers, C., & Jones, C. W. (2017) · ChemSusChem · doi:10.1002/cssc.201600809 · Cited by 216
CO2 capture via adsorption in amine-functionalized sorbents
Darunte, L. A., Walton, K. S., Sholl, D. S., & Jones, C. W. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.03.002 · Cited by 215
“15 bar CO2 among MOFs because of its strongly acidic open metal sites that effectively bind CO2 [30].”
BackgroundHe, Y., Zhou, W., Yildirim, T., & Chen, B. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41166d · Cited by 214
Jiao, Y., Morelock, C. R., Burtch, N. C., Mounfield, W. P., Hungerford, J. T., & Walton, K. S. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03843 · Cited by 208
Amine–silica composites for CO2 capture: A short review
Chen, C., Zhang, S., Row, K. H., & Ahn, W.-S. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.001 · Cited by 206
Amine-modified Mg-MOF-74/CPO-27-Mg membrane with enhanced H2/CO2 separation
Wang, N., Mundstock, A., Liu, Y., Huang, A., & Caro, J. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.10.037 · Cited by 205
Levine, D. J., Runčevski, T., Kapelewski, M. T., Keitz, B. K., Oktawiec, J., Reed, D. A., Mason, J. A., Jiang, H. Z. H., Colwell, K. A., Legendre, C. M., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03523 · Cited by 202
Zhao, Y., Wu, H., Emge, T. J., Gong, Q., Nijem, N., Chabal, Y. J., Kong, L., Langreth, D. C., Liu, H., Zeng, H., et al. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002818 · Cited by 197
Advancement in porous adsorbents for post-combustion CO2 capture
Modak, A., & Jana, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.018 · Cited by 196
CO2 capture by amine-functionalized nanoporous materials: A review
Chen, C., Kim, J., & Ahn, W.-S. (2014) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0257-2 · Cited by 184
Water Desalination with Two-Dimensional Metal–Organic Framework Membranes
Cao, Z., Liu, V., & Barati Farimani, A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03225 · Cited by 183
Munusamy, K., Sethia, G., Patil, D. V., Somayajulu Rallapalli, P. B., Somani, R. S., & Bajaj, H. C. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.04.071 · Cited by 181
Wee, L. H., Lohe, M. R., Janssens, N., Kaskel, S., & Martens, J. A. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31536j · Cited by 180
Gordeeva, L. G., Tu, Y. D., Pan, Q., Palash, M. L., Saha, B. B., Aristov, Y. I., & Wang, R. Z. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105946 · Cited by 177
A comparison of the CO2 capture characteristics of zeolites and metal–organic frameworks
Krishna, R., & van Baten, J. M. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.11.031 · Cited by 176
Zhu, J., Wu, L., Bu, Z., Jie, S., & Li, B.-G. (2019) · ACS Omega · doi:10.1021/acsomega.8b02319 · Cited by 164
Adhikari, A. K., & Lin, K.-S. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.09.086 · Cited by 160
(2022) · doi:10.1016/j.cryogenics.2022.103441 · Cited by 9
Performance-Based Screening of Porous Materials for Carbon Capture
Farmahini, A. H., Krishnamurthy, S., Friedrich, D., Brandani, S., & Sarkisov, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01266 · Cited by 7
Metadata
- Authors
- Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2009-12-08
- Volume
- 106
- Issue
- 49
- Pages
- 20637-20640
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2094005838
- Cited by
- 1,211
- References
- 23
- FWCI
- 46.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.