The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Open accessAbstract
Fabrication of three dimensional (3D) organoids with controlled microarchitectures has been shown to enhance tissue functionality. Bioprinting can be used to precisely position cells and cell-laden materials to generate controlled tissue architecture. Therefore, it represents an exciting alternative for organ fabrication. Despite the rapid progress in the field, the development of printing processes that can be used to fabricate macroscale tissue constructs from ECM-derived hydrogels has remained a challenge. Here we report a strategy for bioprinting of photolabile cell-laden methacrylated gelatin (GelMA) hydrogels. We bioprinted cell-laden GelMA at concentrations ranging from 7 to 15% with varying cell densities and found a direct correlation between printability and the hydrogel mechanical properties. Furthermore, encapsulated HepG2 cells preserved cell viability for at least eight days following the bioprinting process. In summary, this work presents a strategy for direct-write bioprinting of a cell-laden photolabile ECM-derived hydrogel, which may find widespread application for tissue engineering, organ printing and the development of 3D drug discovery platforms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“By adapting this method, we avoided potentially harsh printing conditions including, low temperature for a prolonged printing period [51] and undesirable shear stress along the length of the nozzle [30].”
From A liver-on-a-chip platform with bioprinted hepatic spheroids (2016) · cites this paper as [30]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationCell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationTissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Söker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,857
Mechanical Properties of Lungs
Mead, J. (1961) · Physiological Reviews · doi:10.1152/physrev.1961.41.2.281 · Cited by 1,643
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J. T., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,553
Self-citationPrinting and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,126
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,036
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 901
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B. E., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 869
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 802
Self-citation
Research works printed but not linked: 1
- Xu T, 2013, Biofabrication, 5
Cited by
Sorted by citations
Items 301–400 of 642
Additive‐Free Green Light‐Induced Ligation Using BODIPY Triggers
Li, M., Dove, A. P., & Truong, V. X. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201912555 · Cited by 44
Biological perspectives and current biofabrication strategies in osteochondral tissue engineering
Vyas, C., Mishbak, H., Cooper, G., Peach, C., Pereira, R., & Bártolo, P. (2020) · Biomanufacturing Reviews · doi:10.1007/s40898-020-00008-y · Cited by 36
Impact of cell density on the bioprinting of gelatin methacrylate (GelMA) bioinks
Jain, T., Baker, H. B., Gipsov, A., Fisher, J. P., Joy, A., Kaplan, D. S., & Isayeva, I. S. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00131 · Cited by 44
Ravi, K., Manoharan, T. J. M., Wang, K.-C., Pockaj, B. A., & Nikkhah, M. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122428 · Cited by 45
He, H., Li, D., Lin, Z., Peng, L., Yang, J., Wu, M., Cheng, D., Pan, H., & Ruan, C. (2020) · Biofabrication · doi:10.1088/1758-5090/ab9906 · Cited by 41
Biomedical applications of three‐dimensional bioprinted craniofacial tissue engineering
Charbe, N. B., Tambuwala, M. M., Palakurthi, S. S., Warokar, A., Hromić‐Jahjefendić, A., Bakshi, H. A., Zacconi, F. C. M., Mishra, V. K., Khadse, S. C., Aljabali, A. A. A., et al. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10333 · Cited by 42
Karamchand, L., Makeiff, D., Gao, Y., Azyat, K., Serpe, M. J., & Kulka, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00255 · Cited by 45
Translational tissue-engineered vascular grafts: From bench to bedside
West‐Livingston, L. N., Lim, J. W., & Lee, S. J. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122322 · Cited by 40
Nanomaterials-combined methacrylated gelatin hydrogels (GelMA) for cardiac tissue constructs
Lisboa, E. S., Serafim, C., Mota, W. S., dos Santos, V. L. S., Júnior, R. L. C. D. A., Chaud, M. V., Cardoso, J. C., Jain, S. A., Severino, P. B., & Souto, E. B. (2023) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.11.056 · Cited by 42
Self-citationMicrofluidic Printing of Three-Dimensional Graphene Electroactive Microfibrous Scaffolds
Qing, H., Ji, Y., Li, W., Zhao, G., Yang, Q., Zhang, X., Luo, Z., Lu, T. J., Jin, G., & Xu, F. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17948 · Cited by 41
Novel bioinks from UV-responsive norbornene-functionalized carboxymethyl cellulose macromers
Ji, S., Abaci, A., Morrison, T. X., Gramlich, W. M., & Güvendiren, M. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00083 · Cited by 42
Kim, J., Choi, H., Kim, Y., & Song, S. (2022) · Small · doi:10.1002/smll.202203464 · Cited by 39
Iqbal, M. Z., Riaz, M., Biedermann, T., & Klar, A. S. (2024) · Angiogenesis · doi:10.1007/s10456-024-09928-6 · Cited by 45
Shahabipour, F., Tavafoghi, M., Aninwene, G. E., Bonakdar, S., Oskuee, R. K., Shokrgozar, M. A., Potyondy, T., Alambeigi, F., & Ahadian, S. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37354 · Cited by 39
Maher, M., Glattauer, V., Onofrillo, C., Duchi, S., Yue, Z., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G. (2022) · Marine Drugs · doi:10.3390/md20060366 · Cited by 39
Three-Dimensional Bioprinting of Organoids: Past, Present, and Prospective
Cabral, M., Cheng, K., & Zhu, D. (2024) · Tissue Engineering Part A · doi:10.1089/ten.tea.2023.0209 · Cited by 38
Self‐Organization of Fibroblast‐Laden 3D Collagen Microstructures from Inkjet‐Printed Cell Patterns
Park, J. A., Lee, H., Park, S., & Jung, S. (2020) · Advanced Biosystems · doi:10.1002/adbi.201900280 · Cited by 38
Gerdes, S., Ramesh, S., Mostafavi, A., Tamayol, A., Rivero, I. V., & Rao, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00598 · Cited by 39
Dai, G., & Lee, V. (2015) · Advanced Health Care Technologies · doi:10.2147/ahct.s69191 · Cited by 40
A Review on 3D Printable Techniques for Tissue Engineering
Gupta, S., Bissoyi, A., & Bit, A. (2018) · BioNanoScience · doi:10.1007/s12668-018-0525-4 · Cited by 38
Post‐Maturation Reinforcement of 3D‐Printed Vascularized Cardiac Tissues
Silberman, E., Oved, H., Namestnikov, M., Shapira, A., & Dvir, T. (2023) · Advanced Materials · doi:10.1002/adma.202302229 · Cited by 37
Xu, H., Casillas, J., & Xu, C. (2019) · AIP Advances · doi:10.1063/1.5116371 · Cited by 37
Biocompatible Hydrogels for Microarray Cell Printing and Encapsulation
Datar, A., Joshi, P., & Lee, M. (2015) · Biosensors · doi:10.3390/bios5040647 · Cited by 37
Biomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue
Pérez, R. A., Jung, C., & Kim, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600791 · Cited by 36
Bandyopadhyay, A., Dewangan, V. K., Vajanthri, K. Y., Poddar, S., & Mahto, S. K. (2017) · Journal of Applied Biomedicine · doi:10.1016/j.bbe.2017.12.001 · Cited by 36
Parthiban, S. P., He, W., Monteiro, N., Athirasala, A., França, C. M., & Bertassoni, L. E. (2020) · Scientific Reports · doi:10.1038/s41598-020-78176-7 · Cited by 38
Self-citation3D Printing for Liver Tissue Engineering: Current Approaches and Future Challenges
Lewis, P. L., & Shah, R. N. (2016) · Current Transplantation Reports · doi:10.1007/s40472-016-0084-y · Cited by 35
Tang, F., Manz, X. D., Bongers, A., Odell, R. A., Joukhdar, H., Whitelock, J. M., Lord, M. S., & Rnjak‐Kovacina, J. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01624 · Cited by 35
Kim, D., Lee, H., Lee, G., Hoang, T., Kim, H., & Kim, G. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10317 · Cited by 34
Wang, X., Wang, M., Xu, Y., Yin, J., & Hu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131980 · Cited by 38
Guidelines for establishing a 3-D printing biofabrication laboratory
Sanicola, H. W., Stewart, C. E., Müller, M., Ahmadi, F., Wang, D., Powell, S. K., Sarkar, K., Cutbush, K., Woodruff, M. A., & Brafman, D. A. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107652 · Cited by 34
Ghorbani, F., Sahranavard, M., Nejad, Z. M., Li, D., Zamanian, A., & Yu, B. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.528590 · Cited by 34
State-of-art affordable bioprinters: A guide for the DiY community
Garciamendez‐Mijares, C. E., Agrawal, P. S., Martínez, G. G., Juárez, E. C., & Zhang, Y. S. (2021) · Applied Physics Reviews · doi:10.1063/5.0047818 · Cited by 34
Trends in Photopolymerizable Bioinks for 3D Bioprinting of Tumor Models
Gugulothu, S. B., Asthana, S., Homer‐Vanniasinkam, S., & Chatterjee, K. (2023) · JACS Au · doi:10.1021/jacsau.3c00281 · Cited by 35
Kostadinova, M., Raykovska, M., Simeonov, R., Lolov, S. R., & Mourdjeva, M. (2025) · Current Issues in Molecular Biology · doi:10.3390/cimb47040287 · Cited by 33
3D bioprinting of oligo(poly[ethylene glycol] fumarate) for bone and nerve tissue engineering
Liu, X., Gaihre, B., George, M. N., Miller, A. L., Xu, H., Waletzki, B. E., & Lu, L. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37002 · Cited by 36
Celikkin, N., Mastrogiacomo, S., Dou, W., Heerschap, A., Oosterwijk, E., Walboomers, X. F., & Święszkowski, W. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35067 · Cited by 33
Methacrylated fibrinogen hydrogels for 3D cell culture and delivery
Yameen, H. S., Bar‐Am, O., Saar, G., & Seliktar, D. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.03.046 · Cited by 32
Aljaber, M. B., Verisqa, F., Keskin‐Erdogan, Z., Patel, K. D., Chau, D. Y. S., & Knowles, J. C. (2023) · Biomolecules · doi:10.3390/biom13050811 · Cited by 32
Khanna, A., Ayan, B., Undieh, A. A., Yang, Y., & Huang, N. F. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.04.017 · Cited by 38
Sher, P., Oliveira, S. M., Borges, J., & Mano, J. F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/011001 · Cited by 32
Krouwels, A., Melchels, F. P. W., van Rijen, M. H. P., ten Brink, C., Dhert, W. J. A., Öner, F. C., Tryfonidou, M. A., & Creemers, L. B. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.11.029 · Cited by 32
Biocompatible composite hydrogel with on-demand swelling-shrinking properties for 4D bioprinting
Jensen, P. J., Graham, J. P., Busch, T. K., Fitz, O. R., Jayanadh, S., Pashuck, E. T., & Gonzalez‐Fernandez, T. (2025) · Biomaterials Science · doi:10.1039/d5bm00551e · Cited by 38
Saratti, C. M., Rocca, G. T., & Krejci, I. (2018) · Journal of Prosthodontic Research · doi:10.1016/j.jpor.2018.10.005 · Cited by 31
Hydrocolloid Inks for 3D Printing of Porous Hydrogels
Sears, N. A., Wilems, T. S., Gold, K. A., Lan, Z., Cereceres, S., Dhavalikar, P., Foudazi, R., & Cosgriff‐Hernandez, E. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800343 · Cited by 31
Comeau, P., & Willett, T. L. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110937 · Cited by 31
Alarçın, E., İzbudak, B., Yüce, E., Domingo, S., Tutar, R., Titi, K., Kocaağa, B., Güner, F. S., & Bal‐Öztürk, A. (2022) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37450 · Cited by 31
GelMA ‐based hydrogel biomaterial scaffold: A versatile platform for regenerative endodontics
Huang, L., Chen, X., Yang, X., Zhang, Y., & Qiu, X. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35412 · Cited by 30
Recent Developments in Glioblastoma‐On‐A‐Chip for Advanced Drug Screening Applications
Maity, S., Bhuyan, T., Jewell, C., Kawakita, S., Sharma, S., Nguyen, H. T., Najafabadi, A. H., Ermis, M., Falcone, N., Chen, J., et al. (2024) · Small · doi:10.1002/smll.202405511 · Cited by 34
Self-citationReal-time imaging and analysis of cell-hydrogel interplay within an extrusion-bioprinting capillary
Poologasundarampillai, G., Haweet, A., Jayash, S. N., Morgan, G., Moore, J. E., & Candeo, A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00144 · Cited by 30
Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 31
Dogan, L. E., Scheuring, R. G., Wagner, N., Ueda, Y., Schmidt, S. C., Wörsdörfer, P., Gröll, J., & Ergün, S. (2021) · Biofabrication · doi:10.1088/1758-5090/ac26ac · Cited by 30
Iwanaga, S., Arai, K., & Nakamura, M. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00004-9 · Cited by 30
Biofabrication of engineered blood vessels for biomedical applications
Laowpanitchakorn, P., Zeng, J., Piantino, M., Uchida, K., Katsuyama, M., & Matsusaki, M. (2024) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2024.2330339 · Cited by 31
Biofabrication of muscle fibers enhanced with plant viral nanoparticles using surface chaotic flows
Frías-Sánchez, A. I., Quevedo‐Moreno, D. A., Samandari, M., Negrete, J. A. T., Sánchez-Rodríguez, V. H., González‐Gamboa, I., Ponz, F., Álvarez, M. M., & Santiago, G. T. (2021) · Biofabrication · doi:10.1088/1758-5090/abd9d7 · Cited by 29
Su, J. J. –., Lin, C., Chen, H., Lee, S., & Lin, Y. (2021) · Polymers · doi:10.3390/polym13142354 · Cited by 29
Abdollahi, S., Boktor, J. C., & Hibino, N. (2019) · Translational research · doi:10.1016/j.trsl.2019.05.005 · Cited by 29
Carpio, M. B., González‐Martínez, E., Dabaghi, M., Ungureanu, J., Tafoya, A. A., Martinez, D. A. G., Hirota, J. A., & Moran-Mirabal, J. M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10092 · Cited by 29
Strategies for developing complex multi-component in vitro tumor models: Highlights in glioblastoma
DePalma, T. J., Sivakumar, H., & Skardal, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.114067 · Cited by 30
Khati, V., Turkki, J. A., Ramachandraiah, H., Pati, F., Gaudenzi, G., & Russom, A. (2022) · Bioengineering · doi:10.3390/bioengineering9110603 · Cited by 28
Vijayaraghavan, R., Loganathan, S., & Valapa, R. B. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130472 · Cited by 27
Liu, X., Zuo, Y., Sun, J., Guo, Z., Fan, H., & Zhang, X. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.014 · Cited by 27
Mini-review: advances in 3D bioprinting of vascularized constructs
Bova, L., Billi, F., & Cimetta, E. (2020) · Biology Direct · doi:10.1186/s13062-020-00273-4 · Cited by 29
Liu, X., Yan, J., Liu, J., Wang, Y., Yin, J., & Fu, J. (2021) · Biofabrication · doi:10.1088/1758-5090/abf995 · Cited by 27
Stereolithographic Visible-Light Printing of Poly( l -glutamic acid) Hydrogel Scaffolds
Viray, C. M., van Magill, B., Zreiqat, H., & Ramaswamy, Y. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c01519 · Cited by 27
Advanced micro- and nanofabrication technologies for tissue engineering
Shapira, A., Kim, D., & Dvir, T. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/020301 · Cited by 27
Nagaraja, K., Dhokare, P., Bhattacharyya, A., & Noh, I. (2024) · Molecular Systems Design & Engineering · doi:10.1039/d4me00001c · Cited by 26
Bioinks for Biofabrication: Current State and Future Perspectives
Prendergast, M. E., Solorzano, R. D., & Cabrera, D. (2016) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2016-0002 · Cited by 28
Extrusion-Based Biofabrication in Tissue Engineering and Regenerative Medicine
Hospodiuk, M., Moncal, K. K., Dey, M., & Ozbolat, I. T. (2016) · Springer eBooks · doi:10.1007/978-3-319-40498-1_10-1 · Cited by 27
Preparation, Mechanical and Biological Properties of Inkjet Printed Alginate/Gelatin Hydrogel
Jiao, T., Lian, Q., Zhao, T., Wang, H., & Li, D. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-0036-9 · Cited by 25
Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting
Bilici, Ç., Tatar, A. G., Şentürk, E., Dikyol, C., & Koç, B. (2022) · Biofabrication · doi:10.1088/1758-5090/ac4dd9 · Cited by 25
Cuvellier, M., Rose, S., Ezan, F., Jarry, U., Oliveira, H., Bruyère, A., Rochelle, C. D. L., Legagneux, V., Langouët, S., & Baffet, G. (2022) · Biofabrication · doi:10.1088/1758-5090/ac7825 · Cited by 25
Liu, Y., Zhang, W., Hu, C., Zheng, C., Zhang, F., Yang, L., Li, Z., & Wang, Y. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110711 · Cited by 25
Inkjet-based bioprinting for tissue engineering
Park, J. A., Lee, Y., & Jung, S. (2023) · Organoid · doi:10.51335/organoid.2023.3.e12 · Cited by 25
Pioneering 3D and 4D Bioprinting Strategies for Advanced Wound Management: From Design to Healing
Yadav, A. K., Verma, D., Thakkar, S., Rana, Y., Banerjee, J., Bhatia, D. D., & Banerjee, S. (2025) · Small · doi:10.1002/smll.202506259 · Cited by 29
Yao, Y., Molotnikov, A., Parkington, H. C., Meagher, L., & Forsythe, J. S. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6e87 · Cited by 24
Advantages and limitations of using cell viability assays for 3D bioprinted constructs
Avnet, S., Pompo, G. D., Borciani, G., Fischetti, T., Graziani, G., & Baldini, N. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad2556 · Cited by 24
Hydrogel-encapsulated 3D microwell array for neuronal differentiation
Bae, J. H., Lee, J. M., & Chung, B. G. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/015019 · Cited by 24
Bio-ink Materials for 3D Bio-printing
Kim, J., Hong, S., & Hwang, C. (2016) · Journal of International Society for Simulation Surgery · doi:10.18204/jissis.2016.3.2.049 · Cited by 25
Direct-Write Bioprinting Approach to Construct Multilayer Cellular Tissues
Masaeli, E., & Marquette, C. A. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00478 · Cited by 24
Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues
Gao, L., Ma, L., Yin, X., Luo, Y., Yang, H., & Zhang, B. (2020) · Small Methods · doi:10.1002/smtd.201900669 · Cited by 24
Bioprinting a cell‐laden matrix for bone regeneration: A focused review
Ghorbani, F., Li, D., Zhong, Z., Sahranavard, M., Qian, Z., Ni, S., Zhang, Z., Zamanian, A., & Yu, B. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49888 · Cited by 24
3D printing: prospects and challenges
Martins, J. P., Ferreira, M. P. A., Ezazi, N. Z., Hirvonen, J. T., Santos, H. A., Thrivikraman, G., França, C. M., Athirasala, A., Tahayeri, A., & Bertassoni, L. E. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48063-5.00004-6 · Cited by 26
Self-citationDirect-write and sacrifice-based techniques for vasculatures
Li, S., Wang, K., Hu, Q., Zhang, C., & Wang, B. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109936 · Cited by 23
An in vitro 3D diabetic human skin model from diabetic primary cells
ÖZDOĞAN, C. Y., Kenar, H., DAVUN, K. E., Yücel, D., Döğer, E., & Alagoz, S. M. (2020) · Biomedical Materials · doi:10.1088/1748-605x/abc1b1 · Cited by 23
3D Bioprinting of Reinforced Vessels by Dual-Cross-linked Biocompatible Hydrogels
Peng, K., Liu, X., Zhao, H., Lü, H., Lv, F., Liu, L., Huang, Y., Wang, S., & Gu, Q. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c00283 · Cited by 23
Biofabrication of functional bone tissue: defining tissue-engineered scaffolds from nature
Rifai, A., Weerasinghe, D. K., Tilaye, G. A., Nisbet, D. R., Hodge, J. M., Pasco, J. A., Williams, L. J., Samarasinghe, R. M., & Williams, R. J. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1185841 · Cited by 24
Wang, Y., Yang, S., Cai, H.-Q., Hu, H., Hu, K., Sun, Z., Liu, R., Wei, Y., & Han, L. (2024) · Scientific Reports · doi:10.1038/s41598-024-54853-9 · Cited by 27
In vitro formation of vascular-like networks using hydrogels
Takei, T., Sakai, S., & Yoshida, M. (2016) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2016.03.023 · Cited by 23
Cheng, K. W., Alhasan, L., Rezk, A. R., Al‐Abboodi, A., Doran, P. M., Yeo, L. Y., & Chan, P. P. Y. (2019) · Biofabrication · doi:10.1088/1758-5090/ab4cca · Cited by 24
Net shape fabrication of calcium phosphate scaffolds with multiple material domains
Xie, Y., Rustom, L. E., McDermott, A. M., Boerckel, J. D., Johnson, A. J. W., Alleyne, A. G., & Hoelzle, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015005 · Cited by 22
Pal, P., Sambhakar, S., & Paliwal, S. (2024) · Current Eye Research · doi:10.1080/02713683.2024.2396385 · Cited by 22
Hydrogels for 3-D bioprinting-based tissue engineering
Ng, W. L., Lee, J. M., Zhou, M., & Yeong, W. Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102663-2.00008-3 · Cited by 22
Lee, J., & Kim, G. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.02.007 · Cited by 22
Correa, V. L., Garza, K. M., & Murr, L. E. (2017) · Science China Materials · doi:10.1007/s40843-017-9091-1 · Cited by 22
Three‐Dimensional Printing Applications for Bone Tissue Engineering: A Review
Jalise, S. Z., Mehrabi, A., Habibi, S., Milan, P. B., & Rezapour, A. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70152 · Cited by 21
Long-Gap Sciatic Nerve Regeneration Using 3D-Printed Nerve Conduits with Controlled FGF-2 Release
Rodríguez-Sánchez, D. N., de Carvalho, L. A. M., Corzo, I. J. M., Cartarozzi, L. P., Safari, S., Ermis, M., d’Ávila, M. A., & de Oliveira, A. L. R. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c08237 · Cited by 22
3D Bioprinting: a review of materials, processes and bioink properties
FONTES, A. B. D. S., & Marcomini, R. F. (2020) · The Journal of Engineering and Exact Sciences · doi:10.18540/jcecvl6iss5pp0617-0639 · Cited by 23
Microfluidic 3D Printing of a Photo-Cross-Linkable Bioink Using Insights from Computational Modeling
Mirani, B., Stefanek, E., Godau, B., Dabiri, S. M. H., & Akbari, M. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00084 · Cited by 21
A high-throughput approach to compare the biocompatibility of candidate bioink formulations
Bedell, M. L., Melchiorri, A. J., Aleman, J., Skardal, A., & Mikos, A. G. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00068 · Cited by 23
Metadata
- Authors
- Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- University of Nottingham (GB)
- Corresponding author
- Dokmeci, Mehmet R
- Khademhosseini, Ali
- ORCID
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2014-04-03
- Volume
- 6
- Issue
- 2
- Pages
- 024105
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- PMC
- PMC4040163
- OpenAlex
- W2100081159
- Cited by
- 642
- References
- 37
- Citations by year
- 2026: 17 · 2025: 36 · 2024: 34 · 2023: 44 · 2022: 55 · 2021: 69 · 2020: 72 · 2019: 80 · 2018: 74 · 2017: 68 · 2016: 56 · 2015: 32 · 2014: 4
- FWCI
- 27.67
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biofabrication (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- Repository@Nottingham (University of Nottingham) (submittedVersion, cc-by)
- Repository@Nottingham (University of Nottingham) (submittedVersion)
- Funders
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- National Institutes of Health (EB02597)
- Defense Threat Reduction Agency
- Biotechnology and Biological Sciences Research Council (BB/I02643X/1)
- Australian Research Council (DP120104837)
- National Heart, Lung, and Blood Institute (HL-099073, R01HL099073)
- National Institute of General Medical Sciences (R01GM095906, GM095906)
- National Institute of Allergy and Infectious Diseases (R01AI081534, AI081534)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR057837, R01AR057837)
- National Institute of Biomedical Imaging and Bioengineering (EB02597)
- National Institute of Dental and Craniofacial Research (DE021468, R01DE021468)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- gelatin methacryloyl, cell-laden hydrogels, 3D organoids, printability, hydrogel mechanical properties, HepG2 cells, cell viability, tissue engineering, organ printing
- MeSH terms
- Animals, Biocompatible Materials, Cell Survival, Gelatin, Humans, Methacrylates, Hydrogels, Tissue Engineering, NIH 3T3 Cells, Mice, Tissue Scaffolds, Elastic Modulus, Hep G2 Cells, Bioprinting
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
