The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Open accessAbstract
Fabrication of three dimensional (3D) organoids with controlled microarchitectures has been shown to enhance tissue functionality. Bioprinting can be used to precisely position cells and cell-laden materials to generate controlled tissue architecture. Therefore, it represents an exciting alternative for organ fabrication. Despite the rapid progress in the field, the development of printing processes that can be used to fabricate macroscale tissue constructs from ECM-derived hydrogels has remained a challenge. Here we report a strategy for bioprinting of photolabile cell-laden methacrylated gelatin (GelMA) hydrogels. We bioprinted cell-laden GelMA at concentrations ranging from 7 to 15% with varying cell densities and found a direct correlation between printability and the hydrogel mechanical properties. Furthermore, encapsulated HepG2 cells preserved cell viability for at least eight days following the bioprinting process. In summary, this work presents a strategy for direct-write bioprinting of a cell-laden photolabile ECM-derived hydrogel, which may find widespread application for tissue engineering, organ printing and the development of 3D drug discovery platforms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“By adapting this method, we avoided potentially harsh printing conditions including, low temperature for a prolonged printing period [51] and undesirable shear stress along the length of the nozzle [30].”
From A liver-on-a-chip platform with bioprinted hepatic spheroids (2016) · cites this paper as [30]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
Self-citationCell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Self-citationTissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Söker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,857
Mechanical Properties of Lungs
Mead, J. (1961) · Physiological Reviews · doi:10.1152/physrev.1961.41.2.281 · Cited by 1,643
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J. T., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,553
Self-citationPrinting and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,126
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,036
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 901
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B. E., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 869
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 802
Self-citation
Research works printed but not linked: 1
- Xu T, 2013, Biofabrication, 5
Cited by
Sorted by citations
Items 401–500 of 642
Exploiting the fundamentals of biological organization for the advancement of biofabrication
Hill, J., Wildman, R. D., & Mata, Á. (2021) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2021.10.016 · Cited by 20
Zhang, Z., Li, Q., Hatakeyama, M., & Kitaoka, T. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acd49a · Cited by 20
Bridge, J. C., Amer, M. H., Morris, G. E., Martin, N. R. W., Player, D. J., Knox, A. J., Aylott, J. W., Lewis, M. P., & Rose, F. R. A. J. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aace8f · Cited by 20
Huynh, V. A., Jesmer, A. H., Shoaib, M. M., & Wylie, R. G. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b03908 · Cited by 21
Role of Biological Scaffolds, Hydro Gels and Stem Cells in Tissue Regeneration Therapy
Upadhyay, R. K. (2017) · Advances in Tissue Engineering & Regenerative Medicine Open Access · doi:10.15406/atroa.2017.02.00020 · Cited by 20
de Vasconcelos, A. C. P., Morais, R. P., Novais, G. B., Barroso, S. D. S., Menezes, L. R. O., dos Santos, S., da Costa, L. P., Corrêa, C. B., Severino, P. B., Gomes, M. Z., et al. (2020) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2020.102272 · Cited by 19
Self-citationDobrișan, M.-R., Lungu, A., & Ioniţă, M. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2378003 · Cited by 21
3D bioprinted GelMA scaffolds for clinical applications: Promise and challenges
Das, S., Valoor, R., Jegadeesan, J. T., & Basu, B. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00365 · Cited by 21
Bioprinting: Uncovering the Utility Layer-By-Layer
Burke, M., Carter, B. M., & Perriman, A. W. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0006 · Cited by 19
Jain, T., Saylor, D. M., Piard, C., Liu, Q., Patel, V., Kaushal, R., Choi, J., Fisher, J. P., Isayeva, I. S., & Joy, A. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00964 · Cited by 19
Huang, X., Zhang, Y., Feng, L., Zhang, J., Dai, Y., Shi, M., & Zhao, Y. (2020) · Journal of Polymer Science · doi:10.1002/pol.20200138 · Cited by 19
Naolou, T., Schadzek, N., Hornbostel, J. M., Pepelanova, I., Frommer, M., Lötz, F., Sauheitl, L., Dultz, S., Felde, V. J. M. N. L., Myklebost, O., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adbb90 · Cited by 18
Stimuli-responsive hybrid materials for 4D in vitro tissue models
Aizarna‐Lopetegui, U., Bittinger, S. C., Álvarez, N., Henriksen‐Lacey, M., & de Aberasturi, D. J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102035 · Cited by 19
Gelatin-Based Hybrid Hydrogel Scaffolds: Toward Physicochemical Liver Mimicry
Carpentier, N., der Meeren, L. V., Skirtach, A. G., Devisscher, L., Vlierberghe, H. V., Dubruel, P., & Vlierberghe, S. V. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00643 · Cited by 17
3D Bioprinting for Tumor Metastasis Research
Lin, M., Tang, M., Duan, W., Xia, S., Liu, W., & Wang, Q. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00239 · Cited by 19
Mimicking the liver function in micro-patterned units: Challenges and perspectives in 3D bioprinting
Heydari, Z., Pooyan, P., Bikmulina, P., Pozdnyakov, A. A., Fomin, V. V., Seydi, H., Shpichka, A. I., Timashev, P. S., & Vosough, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00208 · Cited by 18
Li, X., Deng, Q., Wang, S., Li, Q., Zhao, W., Lin, B., Luo, Y., & Zhang, X. (2021) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0167 · Cited by 17
The gelatin-based liquid marbles for cell cryopreservation
Liu, M., Chen, C., Yu, J., Zhang, H., Liang, L., Guo, B., Qiu, Y., Yao, F., Zhang, H., & Li, J. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100477 · Cited by 17
Wang, Z., Huang, C., Liu, H., Shi, Z., Han, X., Li, S., Huang, J. S., Wang, Z., Yan, Y., & Chen, Z. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113202 · Cited by 17
Assessing printability of bioinks
Kyle, S., Jessop, Z. M., Tarassoli, S. P., Al‐Sabah, A., & Whitaker, I. S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00027-2 · Cited by 18
Comeau, P., & Willett, T. L. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900142 · Cited by 17
Porous Biomaterials and Scaffolds for Tissue Engineering
Liverani, L., Guarino, V., Carrubba, V. L., & Boccaccini, A. R. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.99872-6 · Cited by 17
Silva, L. P. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch15 · Cited by 17
Khanna, A., Oropeza, B. P., & Huang, N. F. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37602 · Cited by 20
Jin, T., Fu, Z., Zhou, L., Chen, L., Wang, J., Wang, L., Yan, S., Li, T., & Jin, P. (2024) · Scientific Reports · doi:10.1038/s41598-024-67304-2 · Cited by 16
Advancements in Polymer Biomaterials as Scaffolds for Corneal Endothelium Tissue Engineering
Wu, K. Y., Belaiche, M., Wen, Y., Choulakian, M. Y., & Tran, S. D. (2024) · Polymers · doi:10.3390/polym16202882 · Cited by 18
Novais, G. B., dos Santos, S., Santana, R. J. R., Filho, R. N. P., Cunha, J. L. S., Lima, B. S., Araújo, A. A. D. S., Severino, P. B., Júnior, R. L. C. D. A., Cardoso, J. C., et al. (2021) · Polymers · doi:10.3390/polym13244274 · Cited by 16
Self-citationBioprinting Complex 3D Tissue and Organs
Kengla, C., Kidiyoor, A., & Murphy, S. V. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-801734-0.00068-0 · Cited by 16
The development of natural polymer scaffold-based therapeutics for osteochondral repair
Lemoine, M., Casey, S. M., O’Byrne, J., Kelly, D. J., & O’Brien, F. J. (2020) · Biochemical Society Transactions · doi:10.1042/bst20190938 · Cited by 16
3D bioprinting lobule-like hepatorganoids with induced vascularization for orthotopic implantation
Yan, J., Ye, Z., Lu, Y., Yuan, Y., Wang, X., Yan, T., Yin, J., & Wang, Y. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101515 · Cited by 15
Zhu, M., Hu, T. H., Song, W. D., Cui, X., Tian, Y., Yao, B., Wu, M., Huang, S., & Niu, Z. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120964 · Cited by 16
Deidda, V., Ventisette, I., Langione, M., Giammarino, L., Pioner, J. M., Credi, C., & Carpi, F. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15100297 · Cited by 16
Kadousaraei, M. J., Yamada, S., Aydin, M. S., Rashad, A., Molina, N., Mohamed‐Ahmed, S., Gjerde, C., Malkoch, M., & Mustafa, K. B. E. (2025) · Scientific Reports · doi:10.1038/s41598-025-90389-2 · Cited by 23
3D in vitro cancerous tumor models: Using 3D printers
Zahedi-Tabar, Z., Bagheri‐Khoulenjani, S., Mirzadeh, H., & Amanpour, S. (2019) · Medical Hypotheses · doi:10.1016/j.mehy.2019.02.023 · Cited by 15
Awad, R. H., Habash, S. A., & Hansen, C. J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-803917-5.00002-x · Cited by 15
Materials as Bioinks and Bioink Design
Camacho, P., Busari, H., Seims, K. B., Tolbert, J. W., & Chow, L. W. (2019) · Springer eBooks · doi:10.1007/978-3-030-23906-0_2 · Cited by 16
Gelatin methacrylamide as coating material in cell culture
Egger, M., Tovar, G. E. M., Hoch, E., & Southan, A. (2016) · Biointerphases · doi:10.1116/1.4949545 · Cited by 14
Low-temperature extrusion-based 3D printing of icariin-laden scaffolds for osteogenesis enrichment
Zhang, J.-T., Zhang, S., Liu, C., Kankala, R. K., Chen, A., & Wang, S. (2021) · Regenerative Therapy · doi:10.1016/j.reth.2021.01.001 · Cited by 14
Alghauli, M. A., Aljohani, R., Aljohani, W., Almutairi, S., & Alqutaibi, A. Y. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00395 · Cited by 14
3D bioprinting technology innovation in female reproductive system
Chen, S., Wang, T., Chen, J., Sui, M., Wang, L., Zhao, X., Sun, J., & Lu, Y. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101551 · Cited by 13
Recent Advances in Nanostructured Polymer Composites for Biomedical Applications
Silva, A. D. R., Stocco, T. D., Granato, A. E. C., Harb, S. V., Afewerki, S., Bassous, N. J., Hammer, P., Webster, T. J., Marciano, F. R., & Lobo, A. O. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816771-7.00002-8 · Cited by 14
Candidate bioinks for 3D bioprinting soft tissue
Tarassoli, S. P., Jessop, Z. M., Kyle, S., & Whitaker, I. S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00026-0 · Cited by 13
Stimuli-responsive Hydrogels for Targeted Antibiotic Delivery in Bone Tissue Engineering
Kumar, J., Tolepbergenova, M., Musayev, A., Aizhan, D., Бегимбекова, Л. М., Kumar, H., Gulnar, T., Kumar, P., & Khan, S. (2025) · AAPS PharmSciTech · doi:10.1208/s12249-025-03218-0 · Cited by 12
Wang, M., Zhao, J., Luo, Y., Liang, Q., Liu, Y., Zhong, G., Yu, Y., & Chen, F. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200179 · Cited by 12
Recent advancements of human iPSC derived cardiomyocytes in drug screening and tissue regeneration
Huang, Y., Wang, T., Lopez, M. E. U., Hirano, M., Hasan, A., & Shin, S. R. (2020) · Microphysiological Systems · doi:10.21037/mps-20-3 · Cited by 14
3D Bio-printing For Skin Tissue Regeneration: Hopes and Hurdles
Aavani, F., Biazar, E., Kheilnezhad, B., & Amjad, F. (2022) · Current Stem Cell Research & Therapy · doi:10.2174/1574888x17666220204144544 · Cited by 12
Current trends and research topics regarding liver 3D bioprinting: A bibliometric analysis research
Jin, B., Liu, Y., Du, S., Sang, X., Yang, H., & Mao, Y. (2022) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2022.1047524 · Cited by 12
Liu, S., Zhang, H., Li, S., Sun, C., & Hu, Q. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800642 · Cited by 12
Additive‐Free Green Light‐Induced Ligation Using BODIPY Triggers
Li, M., Dove, A. P., & Truong, V. X. (2019) · Angewandte Chemie · doi:10.1002/ange.201912555 · Cited by 12
Study on parameter optimization of 3D bioprinting of hybrid bio-inks
James, S., & Mulgaonkar, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-08561-7 · Cited by 11
Selective Formation of Osteogenic and Vasculogenic Tissues for Cartilage Regeneration
Liu, Z., Nan, H., Chiou, Y., Zhan, Z., Lobie, P. E., & Hu, C. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202202008 · Cited by 11
Automated Robotic Dispensing Technique for Surface Guidance and Bioprinting of Cells
Bhuthalingam, R., Lim, P. Q., Irvine, S. A., & Venkatraman, S. S. (2016) · Journal of Visualized Experiments · doi:10.3791/54604 · Cited by 11
Boosting up printability of biomacromolecule based bio-ink by modulation of hydrogen bonding pairs
Köksal, B., Önbaş, R., Başkurt, M., Şahin, H., Yıldız, A. A., & Yıldız, Ü. H. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110070 · Cited by 11
The effect of LDHs nanoparticles on the cellular behavior of stem cell-laden 3D-bioprinted scaffold
İzbudak, B., & Bal‐Öztürk, A. (2022) · Journal of Biomaterials Applications · doi:10.1177/08853282221082921 · Cited by 11
Sithole, M. N., Mndlovu, H., du Toit, L. C., & Choonara, Y. E. (2023) · Current Pharmaceutical Design · doi:10.2174/0113816128246888230920060802 · Cited by 12
Current state and future of 3D bioprinted models for cardio-vascular research and drug development
Polonchuk, L., & Gentile, C. (2021) · ADMET & DMPK · doi:10.5599/admet.951 · Cited by 11
Kim, S. J., Lee, G., & Park, J. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101326 · Cited by 12
Tu, Y., Hassan, A., Arrieta‐Escobar, J. A., Zaman, U. K. U., Xue, F., Siadat, A., & Yang, G. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.09.026 · Cited by 11
Emerging Trends in Biomaterials Research
Gaharwar, A. K., Detamore, M. S., & Khademhosseini, A. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1644-0 · Cited by 11
Self-citationWu, S., Chai, Z., Yang, Y., Ding, R., Gao, B., Chen, C., He, S., Zhang, Z., Wan, W., & Zou, R. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01151 · Cited by 10
Kotani, T., Mubarok, W., Hananouchi, T., & Sakai, S. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00996 · Cited by 10
Wu, X., Zhao, F., Wang, H., Schirhagl, R., & Włodarczyk-Biegun, M. K. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101593 · Cited by 10
Guo, Y., Wusiman, H., Zhao, L., James-ocloo, O. S., Han, X., Miao, Y., Nie, J., Wang, L., Du, J., Wei, Y., et al. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112505 · Cited by 11
Li, S., Zhang, H.-G., Li, D., Wu, J.-P., Sun, C., & Hu, Q. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00355 · Cited by 10
Ritter, P. D., Bye, L. J., Finol‐Urdaneta, R. K., Lesko, C., Adams, D. J., Friedrich, O., & Gilbert, D. F. (2020) · Experimental Cell Research · doi:10.1016/j.yexcr.2020.112210 · Cited by 10
Teng, F., Wang, W., Wang, Z., & Wang, G.-X. (2024) · Biofabrication · doi:10.1088/1758-5090/ad28f0 · Cited by 12
3D Bioprinting for Cardiovascular Tissue Engineering
Kuss, M. A., & Duan, B. (2017) · Springer eBooks · doi:10.1007/978-3-319-53523-4_18 · Cited by 10
Perfusion-based co-culture model system for bone tissue engineering
Sawyer, S. W., Zhang, K., Horton, J. A., & Soman, P. (2020) · AIMS bioengineering · doi:10.3934/bioeng.2020009 · Cited by 10
Recent advances in cell-laden 3D bioprinting: materials, technologies and applications
Huang, J., Fu, H., Li, C., Dai, J., & Zhang, Z. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0010 · Cited by 10
Duan, Y., Mi, X., Yu, Q., Zhu, Z., Gong, C., Hong, Y., Huang, H., He, S., Wang, L., Guo, Q., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202503987 · Cited by 9
Shi, R., Cai, X., He, G., Guan, J., Liu, Y., Lu, H., Mao, Z., Li, Y., Guo, H., & Hai, Y. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.596 · Cited by 9
Error assessment and correction for extrusion- based bioprinting using computer vision method
Liu, C., Yang, C., Liu, J., Tang, Y., Lin, Z., Li, L., Liang, H., Lu, W., & Wang, L. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.644 · Cited by 9
Balaji, K. V., Bhutoria, S., Nayak, S., Kumar, P. A., & Velayudhan, S. (2023) · Biomedical Engineering Advances · doi:10.1016/j.bea.2023.100083 · Cited by 9
A New Leap in Periodontics: Three-dimensional (3D) Printing
Patel, R., Sheth, T., Shah, S. S., & Shah, M. (2017) · Journal of Advanced Oral Research · doi:10.1177/2229411217729102 · Cited by 9
Poly(alkyl glycidyl ether) hydrogels for harnessing the bioactivity of engineered microbes
Johnston, T. G., Fellin, C. R., Carignano, A., & Nelson, A. (2019) · Faraday Discussions · doi:10.1039/c9fd00019d · Cited by 9
Cirillo, G., Curcio, M., Vittorio, O., Spizzirri, U. G., Nicoletta, F. P., Picci, N., Hampel, S., & Iemma, F. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600192 · Cited by 9
Wang, Z., Huang, C., Shi, Z., Liu, H., Han, X., Chen, Z., Li, S., Wang, Z., & Huang, J. S. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213895 · Cited by 8
Wang, Z., Huang, C., Shi, Z., Liu, H., Han, X., Chen, Z., Li, S., Wang, Z., & Huang, J. S. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.114494 · Cited by 8
Bustillo, J. P. O., Engels, E., de Rover, V., Roughley, K., Posadas, J. R. D., Inocencio, E. T., Warren, D., Wallace, G. G., Tehei, M., Rosenfeld, A. B., et al. (2025) · Scientific Reports · doi:10.1038/s41598-025-88793-9 · Cited by 8
A Review on 4D Tissue Bioprinting: New Dawn for Tissue Engineering
Bose, M., Narang, S., Maurya, S., & Mukherjee, S. (2025) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-025-00469-y · Cited by 8
Direct foam writing in microgravity
Cordonier, G. J., Sharafati, C., Mays, S., Thackery, L., Gemmen, E., Cyphert, S., Brown, M., Napolillo, J. Q., Toney, S., Moore, H., et al. (2021) · npj Microgravity · doi:10.1038/s41526-021-00185-1 · Cited by 8
Göckler, T., Albreiki, F., Li, D., Grimm, A., Mecklenburg, F., Urueña, J. M., Schepers, U., & Srivastava, S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c01085 · Cited by 8
3D bioprinting for active drug delivery
Lee, J. E.-Y., Unnithan, A. R., Park, C. H., & Kim, C. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814944-7.00005-9 · Cited by 8
Additive manufacturing of biomaterials
Torre, M., Giannitelli, S. M., Mauri, E., Trombetta, M., & Rainer, A. (2021) · Advances in chemical engineering · doi:10.1016/bs.ache.2021.03.003 · Cited by 8
MechAnalyze : An Algorithm for Standardization and Automation of Compression Test Analysis
Kahl, M., Schneidereit, D., Bock, N., Friedrich, O., Hutmacher, D. W., & Meinert, C. (2021) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2021.0170 · Cited by 9
Hybprinting for musculoskeletal tissue engineering
Li, J., Kim, C., Pan, C., Babian, A., Lui, E., Young, J. L., Moeinzadeh, S., Kim, S., & Yang, Y. (2022) · iScience · doi:10.1016/j.isci.2022.104229 · Cited by 9
Strategic use of organoids and organs-on-chip as biomimetic tools
Santos, A. K., Scalzo, S., Souza, R. T. V., Santana, P. H. G., Marques, B. L., de Oliveira, L. F., Filho, D. M., Kihara, A. H., Santiago, H. C., Parreira, R. C., et al. (2022) · Seminars in Cell and Developmental Biology · doi:10.1016/j.semcdb.2022.09.010 · Cited by 9
Bioprinting: An Industrial Perspective
Roskos, K., Stuiver, I., Pentoney, S., & Presnell, S. C. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00024-4 · Cited by 8
Ozbolat, I. T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803010-3.00004-4 · Cited by 8
3D Printing for the Future of Medicine
Hadisi, Z., Walsh, T., Dabiri, S. M. H., Seyfoori, A., Godeau, B., Charest, G., Fortin, D., & Akbari, M. (2020) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2019-0010 · Cited by 8
Light‐activated 3D printed fish‐like actuator
Pendlmayr, S., Ramos‐Docampo, M. A., Bento, D. H., Brodszkij, E., Juhl, D. W., Nielsen, N. C., & Städler, B. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.55746 · Cited by 7
Kumari, K., Sanyal, A., Rawat, P., Kumar, V., Garg, M., Debrupa Lahiri, A., Ghosh, S., & Baligar, P. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00350 · Cited by 8
Watanabe, T., Hatayama, N., Guo, M. Z., Yuhara, S., & Shinoka, T. (2024) · Bioengineering · doi:10.3390/bioengineering11100954 · Cited by 8
Challenges and Innovative Strategies in 3D Printing of Natural Biomolecular Hydrogels
Qiu, J., Ma, S., & Qu, X. (2025) · Nano Select · doi:10.1002/nano.202400149 · Cited by 8
Shukla, A. K., Shukla, S., Suryawanshi, S. P., Upadhyay, A. M., Ray, N., Thiruppathi, G., Dutta, S. D., & Mongre, R. K. (2025) · Current Oncology · doi:10.3390/curroncol32120653 · Cited by 10
Ozbolat, I. T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803010-3.00003-2 · Cited by 7
Bioinks for Three-Dimensional Printing in Regenerative Medicine
Navarro, J., Calderon, G. A., Miller, J. S., & Fisher, J. P. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00046-1 · Cited by 7
Biomimetic GelMPC Micropatterns on Titanium and Their Effects on Platelets and Endothelialization
Ma, W., Yang, P., Zhao, Y., & Huang, N. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800624 · Cited by 7
Introduction to 3D-bioprinting: the history, principles and stages
Khesuani, Y. D., Sergeeva, N. S., Mironov, V. A., Газизьянович, М. А., & Каприн, А. Д. (2018) · Genes and Cells · doi:10.23868/201811031 · Cited by 7
Bioprinting technologies: an overview
Bonatti, A. F., Fortunato, G. M., Maria, C. D., & Vozzi, G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00006-6 · Cited by 8
Metadata
- Authors
- Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., & Khademhosseini, A.
- Affiliations
- Brigham and Women's Hospital (US)
- University of Nottingham (GB)
- Corresponding author
- Dokmeci, Mehmet R
- Khademhosseini, Ali
- ORCID
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2014-04-03
- Volume
- 6
- Issue
- 2
- Pages
- 024105
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- PMC
- PMC4040163
- OpenAlex
- W2100081159
- Cited by
- 642
- References
- 37
- Citations by year
- 2026: 17 · 2025: 36 · 2024: 34 · 2023: 44 · 2022: 55 · 2021: 69 · 2020: 72 · 2019: 80 · 2018: 74 · 2017: 68 · 2016: 56 · 2015: 32 · 2014: 4
- FWCI
- 27.67
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- Locations
- Biofabrication (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- Repository@Nottingham (University of Nottingham) (submittedVersion, cc-by)
- Repository@Nottingham (University of Nottingham) (submittedVersion)
- Funders
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- National Institutes of Health (EB02597)
- Defense Threat Reduction Agency
- Biotechnology and Biological Sciences Research Council (BB/I02643X/1)
- Australian Research Council (DP120104837)
- National Heart, Lung, and Blood Institute (HL-099073, R01HL099073)
- National Institute of General Medical Sciences (R01GM095906, GM095906)
- National Institute of Allergy and Infectious Diseases (R01AI081534, AI081534)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR057837, R01AR057837)
- National Institute of Biomedical Imaging and Bioengineering (EB02597)
- National Institute of Dental and Craniofacial Research (DE021468, R01DE021468)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- gelatin methacryloyl, cell-laden hydrogels, 3D organoids, printability, hydrogel mechanical properties, HepG2 cells, cell viability, tissue engineering, organ printing
- MeSH terms
- Animals, Biocompatible Materials, Cell Survival, Gelatin, Humans, Methacrylates, Hydrogels, Tissue Engineering, NIH 3T3 Cells, Mice, Tissue Scaffolds, Elastic Modulus, Hep G2 Cells, Bioprinting
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
