The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Development of a clay based bioink for 3D cell printing for skeletal application
Open accessAbstract
Three-dimensional printing of cell-laden hydrogels has evolved as a promising approach on the route to patient-specific or complex tissue-engineered constructs. However, it is still challenging to print structures with both, high shape fidelity and cell vitality. Herein, we used a synthetic nanosilicate clay, called Laponite, to build up scaffolds utilising the extrusion-based method 3D plotting. By blending with alginate and methylcellulose, a bioink was developed which allowed easy extrusion, achieving scaffolds with high printing fidelity. Following extrusion, approximately 70%-75% of printed immortalised human mesenchymal stem cells survived and cell viability was maintained over 21 days within the plotted constructs. Mechanical properties of scaffolds comprised of the composite bioink decreased over time when stored under cell culture conditions. Nevertheless, shape of the plotted constructs was preserved even over longer cultivation periods. Laponite is known for its favourable drug delivery properties. Two model proteins, bovine serum albumin and vascular endothelial growth factor were loaded into the bioink. We demonstrate that the release of both growth factors significantly changed to a more sustained profile by inclusion of Laponite in comparison to an alginate-methylcellulose blend in the absence of Laponite. In summary, addition of a synthetic clay, Laponite, improved printability, increased shape fidelity and was beneficial for controlled release of biologically active agents such as growth factors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In 3D printing, on the other hand, MC has acted as an ink’s viscosity modifier or inks’ sacrificial component [34,35,36].”
From 3D Printing of Thermoresponsive Hydrogel Laden with an Antimicrobial Agent towards Wound Healing Applications (2021) · cites this paper as [35]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
Hoppe, A., Güldal, N. S., & Boccaccini, A. R. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.004 · Cited by 2,608
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 2×
“This includes, amongst others, parameters such as: i) viscosity of the hydrogel, ii) the gelation process, iii) the built network structure and its influence on diffusion and mechanical strength, and furthermore the induced shear stress caused by the needle gauge [9,10].”
BackgroundBone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Kuo, C. K., & Ma, P. X. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00201-5 · Cited by 1,491
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Effect of Ca2+, Ba2+, and Sr2+ on Alginate Microbeads
Mørch, Ý. A., Donati, I., Strand, B. L., & Skjåk-Bræk, G. (2006) · Biomacromolecules · doi:10.1021/bm060010d · Cited by 863
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Nanocomposite polymer hydrogels
Schexnailder, P., & Schmidt, G. (2009) · Colloid and Polymer Science · doi:10.1007/s00396-008-1949-0 · Cited by 697
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Clay minerals and their beneficial effects upon human health. A review
Carretero, M. I. (2002) · Applied Clay Science · doi:10.1016/s0169-1317(01)00085-0 · Cited by 613
Natural polymers for the microencapsulation of cells
Gasperini, L., Mano, J. F., & Reis, R. L. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0817 · Cited by 602
Methylcellulose, a Cellulose Derivative with Original Physical Properties and Extended Applications
Nasatto, P., Pignon, F., Silveira, J., Duarte, M., Noseda, M., & Rinaudo, M. (2015) · Polymers · doi:10.3390/polym7050777 · Cited by 515
The nature of laponite and its aqueous dispersions
Thompson, D. W., & Butterworth, J. T. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90254-j · Cited by 419
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
Clay: New Opportunities for Tissue Regeneration and Biomaterial Design
Dawson, J. I., & Oreffo, R. O. C. (2013) · Advanced Materials · doi:10.1002/adma.201301034 · Cited by 351
Self-citationBioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Evaluation of Fibroblasts Adhesion and Proliferation on Alginate-Gelatin Crosslinked Hydrogel
Sarker, B., Singh, R., Silva, R., Roether, J. A., Kaschta, J., Detsch, R., Schubert, D. W., Cicha, I., & Boccaccini, A. R. (2014) · PLoS ONE · doi:10.1371/journal.pone.0107952 · Cited by 268
Jin, Y., Liu, C., Chai, W., Compaan, A., & Huang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03613 · Cited by 238
Schütz, K., Placht, A.-M., Paul, B., Brüggemeier, S., Gelinsky, M., & Lode, A. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2058 · Cited by 236
Self-citationBioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Biofabrication: an overview of the approaches used for printing of living cells
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & in het Panhuis, M. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-4853-6 · Cited by 227
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Böcker, W., Yin, Z., Drosse, I., Haasters, F., Rossmann, O., Wierer, M., Popov, C., Locher, M., Mutschler, W., Docheva, D., et al. (2008) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2008.00299.x · Cited by 210
Hydration—dehydration properties of methylcellulose and hydroxypropylmethylcellulose
Sarkar, N., & Walker, L. C. (1995) · Carbohydrate Polymers · doi:10.1016/0144-8617(95)00061-b · Cited by 187
Clay Gels For the Delivery of Regenerative Microenvironments
Dawson, J. I., Kanczler, J. M., Yang, X. B., Attard, G. S., & Oreffo, R. O. C. (2011) · Advanced Materials · doi:10.1002/adma.201100968 · Cited by 170
Self-citationAlginate-based hydrogels with improved adhesive properties for cell encapsulation
Sarker, B., Rompf, J., Silva, R., Lang, N., Detsch, R., Kaschta, J., Fabry, B., & Boccaccini, A. R. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.03.061 · Cited by 167
Nakamura, S., Matsumoto, T., Sasaki, J.-I., Egusa, H., Lee, K. Y., Nakano, T., Sohmura, T., & Nakahira, A. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0337 · Cited by 158
Lode, A., Krujatz, F., Brüggemeier, S., Quade, M., Schütz, K., Knaack, S., Weber, J., Bley, T., & Gelinsky, M. (2015) · Engineering in Life Sciences · doi:10.1002/elsc.201400205 · Cited by 158
Self-citationBernhardt, A., Markus, W., Paul, B., Hochmuth, T., Schumacher, M., Schütz, K., & Gelinsky, M. (2015) · PLoS ONE · doi:10.1371/journal.pone.0129205 · Cited by 157
Self-citationRecent advances in clay mineral-containing nanocomposite hydrogels
Zhao, L. Z., Zhou, C. H., Wang, J., Tong, D. S., Yu, W. H., & Wang, H. (2015) · Soft Matter · doi:10.1039/c5sm01277e · Cited by 154
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
Self-citationMatrix Stiffness: A Regulator of Cellular Behavior and Tissue Formation
Mason, B. N., Califano, J. P., & Reinhart‐King, C. A. (2011) · Springer eBooks · doi:10.1007/978-1-4614-1080-5_2 · Cited by 123
Raja, N., & Yun, H. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00849f · Cited by 119
Akkineni, A. R., Ahlfeld, T., Lode, A., & Gelinsky, M. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045001 · Cited by 112
Self-citationMoisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 111
Schumacher, M., Deisinger, U., Detsch, R., & Ziegler, G. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4166-6 · Cited by 97
Naficy, S., Kawakami, S., Sadegholvaad, S., Wakisaka, M., & Spinks, G. M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39417 · Cited by 88
Danoux, C., Bassett, D. C., Othman, Z., Rodrigues, A. I., Reis, R. L., Barralet, J. E., van Blitterswijk, C., & Habibović, P. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.003 · Cited by 85
pH sensitive Laponite/alginate hybrid hydrogels: swelling behaviour and release mechanism
Li, Y., Maciel, D., Tomás, H., Rodrigues, J., Ma, H., & Shi, X. (2011) · Soft Matter · doi:10.1039/c1sm05345k · Cited by 85
Physico-chemical, mechanical and cytotoxicity characterizations of Laponite®/alginate nanocomposite
Ghadiri, M., Chrzanowski, W., Lee, W., Fathi, A., Dehghani, F., & Rohanizadeh, R. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.08.049 · Cited by 84
Introduction to In Situ Forming Hydrogels for Biomedical Applications
Choi, B., Loh, X. J., Tan, A., Loh, C. K., Ye, E., Joo, M. K., & Jeong, B. (2014) · Series in bioengineering · doi:10.1007/978-981-287-152-7_2 · Cited by 71
Heparin modification of a biomimetic bone matrix for controlled release of VEGF
Knaack, S., Lode, A., Hoyer, B., Rösen‐Wolff, A., Gabrielyan, A., Roeder, I., & Gelinsky, M. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35020 · Cited by 60
Self-citationAntitumor Efficacy of Doxorubicin-Loaded Laponite/Alginate Hybrid Hydrogels
Gonçalves, M., Porto-Figueira, P., Maciel, D., Rodrigues, J., Shi, X., Tomás, H., & Li, Y. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300241 · Cited by 56
A shear-thinning hydrogel that extends in vivo bioactivity of FGF2
Ding, X., Gao, J., Wang, Z., Awada, H. K., & Wang, Y. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.026 · Cited by 54
Coaxial additive manufacture of biomaterial composite scaffolds for tissue engineering
Cornock, R., Beirne, S., Thompson, B., & Wallace, G. G. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025002 · Cited by 52
Knarr, M., & Bayer, R. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.078 · Cited by 22
Cited by
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Self-citationRecent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Self-citationHydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Alginate hydrogels for bone tissue engineering, from injectables to bioprinting: A review
Hernández-González, A. C., Téllez-Jurado, L., & Rodríguez-Lorenzo, L. M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115514 · Cited by 549
Metadata
- Authors
- Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-07-25
- Volume
- 9
- Issue
- 3
- Pages
- 034103
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2734747265
- Cited by
- 301
- References
- 58
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.