Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Open accessThe DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
The development and formulation of printable inks for extrusion-based 3D bioprinting has been a major challenge in the field of biofabrication. Inks, often polymer solutions with the addition of crosslinking to form hydrogels, must not only display adequate mechanical properties for the chosen application but also show high biocompatibility as well as printability. Here we describe a reproducible two-step method for the assessment of the printability of inks for bioprinting, focussing firstly on screening ink formulations to assess fibre formation and the ability to form 3D constructs before presenting a method for the rheological evaluation of inks to characterise the yield point, shear thinning and recovery behaviour. In conjunction, a mathematical model was formulated to provide a theoretical understanding of the pressure-driven, shear thinning extrusion of inks through needles in a bioprinter. The assessment methods were trialled with a commercially available crème, poloxamer 407, alginate-based inks and an alginate-gelatine composite material. Yield stress was investigated by applying a stress ramp to a number of inks, which demonstrated the necessity of high yield for printable materials. The shear thinning behaviour of the inks was then characterised by quantifying the degree of shear thinning and using the mathematical model to predict the window of printer operating parameters in which the materials could be printed. Furthermore, the model predicted high shear conditions and high residence times for cells at the walls of the needle and effects on cytocompatibility at different printing conditions. Finally, the ability of the materials to recover to their original viscosity after extrusion was examined using rotational recovery rheological measurements. Taken together, these assessment techniques revealed significant insights into the requirements for printable inks and shear conditions present during the extrusion process and allow the rapid and reproducible characterisation of a wide variety of inks for bioprinting.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiji: an open-source platform for biological-image analysis
Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., et al. (2012) · Nature Methods · doi:10.1038/nmeth.2019 · Cited by 66,890 · cited 1×
“Live and dead cells were counted for three samples per condition, at six locations within each sample with Fiji [23].”
Background3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · cited 1×
“products for tissue engineering and regenerative medicine [4].”
BackgroundSelf-citationAlginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Rheology of Fluid and Semisolid Foods: Principles and Applications
Rao, M. A. (2007) · Food Engineering Series · doi:10.1007/978-0-387-70930-7 · Cited by 800
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Self-citationBiofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Self-citationAdvanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Self-citationWüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
Drop-on-demand printing of cells and materials for designer tissue constructs
Boland, T., Tao, X., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. (2007) · Materials Science and Engineering: C · doi:10.1016/j.msec.2006.05.047 · Cited by 220
Rheology of Fluid, Semisolid, and Solid Foods: Principles and Applications
Rao, M. A. (2014) · Food Engineering Series · doi:10.1007/978-1-4614-9230-6 · Cited by 218
Three-Dimensional Printing Fiber Reinforced Hydrogel Composites
Bakarich, S. E., Gorkin, R., in het Panhuis, M., & Spinks, G. M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503878d · Cited by 192
Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review
Suntornnond, R., An, J., & Chua, C. K. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600266 · Cited by 180
A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. (2016) · Materials · doi:10.3390/ma9090756 · Cited by 171
Flow and Functional Models for Rheological Properties of Fluid Foods
Rao, M. A. (2007) · Food engineering series · doi:10.1007/978-0-387-70930-7_2 · Cited by 133
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 110
Costantini, M., Testa, S., Fornetti, E., Barbetta, A., Trombetta, M., Cannata, S. M., Gargioli, C., & Rainer, A. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00022 · Cited by 109
Sarker, M., & Chen, X. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 88
Modeling of Positive-Displacement Fluid Dispensing Processes
Chen, D., & Kai, J. (2004) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2004.843083 · Cited by 71
3D B ioprinting of complex channels—Effects of material, orientation, geometry, and cell embedding
Wüst, S., Müller, R., & Hofmann, S. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35393 · Cited by 60
Effects of Fluid Properties on Dispensing Processes for Electronics Packaging
Chen, D., & Ke, H. (2006) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2006.874964 · Cited by 57
MODELING MECHANICAL CELL DAMAGE IN THE BIOPRINTING PROCESS EMPLOYING A CONICAL NEEDLE
Li, M., TIAN, X., Koziński, J. A., Chen, D., & Hwang, D. K. (2015) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519415500736 · Cited by 53
Mesenchymal stem cell printing and process regulated cell properties
Snyder, J., Son, A. R., Hamid, Q., Wang, C., Lui, Y., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044106 · Cited by 48
Tian, X. Y., Li, M. G., Cao, N., Li, J. W., & Chen, X. B. (2009) · Biofabrication · doi:10.1088/1758-5082/1/4/045005 · Cited by 36
Kraut, G., Yenchesky, L., Prieto, F., Tovar, G. E. M., & Southan, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45083 · Cited by 31
Cited by
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Translational Applications of Hydrogels
Correa, S., Grosskopf, A. K., Lopez Hernandez, H., Chan, D., Yu, A. C., Stapleton, L. M., & Appel, E. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01177 · Cited by 1,143
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Metadata
- Authors
- Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2017-11-14
- Volume
- 9
- Issue
- 4
- Pages
- 044107
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2755965525
- Cited by
- 950
- References
- 42
- FWCI
- 23.05
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.