Bioprinting Technology: A Current State-of-the-Art Review

Tissue engineering

Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893 · see citing works

Self-Assembly at All Scales

Whitesides, G. M., & Grzybowski, B. A. (2002) · Science · doi:10.1126/science.1070821 · Cited by 7,457 · see citing works

Chitosan—A versatile semi-synthetic polymer in biomedical applications

Dash, M., Chiellini, E., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,920 · see citing works

Tissue Engineering--Current Challenges and Expanding Opportunities

Griffith, L. G., & Naughton, G. K. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,348 · see citing works

Small molecule drug screening in Drosophila identifies the 5HT2A receptor as a feeding modulation target

Gasque, G., Conway, S., Huang, J., Rao, Y., & Vosshall, L. B. (2013) · Scientific Reports · doi:10.1038/srep02120 · Cited by 2,320 · see citing works

The design of scaffolds for use in tissue engineering. Part I. Traditional factors

Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234 · see citing works

3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs

Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102 · see citing works

Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues

Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917 · see citing works

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · see citing works

25th Anniversary Article: Engineering Hydrogels for Biofabrication

Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · see citing works

Inkjet Printing for Materials and Devices

Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,828 · see citing works

Plasmofluidic single-molecule surface-enhanced Raman scattering from dynamic assembly of plasmonic nanoparticles

Patra, P. P., Chikkaraddy, R., Tripathi, R. P. N., Dasgupta, A., & Kumar, G. V. P. (2014) · Nature Communications · doi:10.1038/ncomms5357 · Cited by 1,723 · see citing works

Beyond molecules: Self-assembly of mesoscopic and macroscopic components

Whitesides, G. M., & Boncheva, M. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.082065899 · Cited by 1,628 · see citing works

Synthetic Matrix Metalloproteinase-Sensitive Hydrogels for the Conduction of Tissue Regeneration: Engineering Cell-Invasion Characteristics

Lutolf, M. P., Lauer-Fields, J. L., Schmoekel, H. G., Metters, A. T., Weber, F. E., Fields, G. B., & Hubbell, J. A. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0737381100 · Cited by 1,508 · see citing works

A completely biological tissue-engineered human blood vessel

L’Heureux, N., Pâquet, S., Labbé, R., Germain, L., & Auger, F. A. (1998) · The FASEB Journal · doi:10.1096/fasebj.12.1.47 · Cited by 1,401 · see citing works

Designing materials to direct stem-cell fate

Lütolf, M. P., Gilbert, P. M., & Blau, H. M. (2009) · Nature · doi:10.1038/nature08602 · Cited by 1,389 · see citing works

Scaffold-free vascular tissue engineering using bioprinting

Norotte, C., Marga, F., Niklason, L. E., & Forgács, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,342 · see citing works

Biomimetic materials for tissue engineering

Ma, P. X. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.08.041 · Cited by 1,310 · see citing works

Making Tissue Engineering Scaffolds Work. Review: The application of solid freeform fabrication technology to the production of tissue engineering scaffolds

Sachlos, E., & Czernuszka, J. T. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,305 · see citing works

Organ printing: computer-aided jet-based 3D tissue engineering

Mironov, V., Boland, T., Trusk, T. C., Forgács, G., & Markwald, R. R. (2003) · Trends in biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,278 · see citing works

Recent advances in three‐dimensional multicellular spheroid culture for biomedical research

Lin, R., & Chang, H. (2008) · Biotechnology Journal · doi:10.1002/biot.200700228 · Cited by 1,264 · see citing works

Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications

Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,242 · see citing works

Organ printing: Tissue spheroids as building blocks

Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238 · see citing works

Additive manufacturing of tissues and organs

Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bártolo, P., & Hutmacher, D. W. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,223 · see citing works

Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems

Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,124 · see citing works

Inkjet printing of viable mammalian cells

Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,036 · see citing works

Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs

Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944 · see citing works

Engineering Hydrogels as Extracellular Matrix Mimics

Geçkil, H., Xu, F., Zhang, X., Moon, S., & Demirci, U. (2010) · Nanomedicine · doi:10.2217/nnm.10.12 · Cited by 943 · see citing works

SUCCESSFUL HOMOTRANSPLANTATION OF THE HUMAN KIDNEY BETWEEN IDENTICAL TWINS

Merrill, J. P. (1956) · JAMA · doi:10.1001/jama.1956.02960390027008 · Cited by 861 · see citing works

Laser assisted bioprinting of engineered tissue with high cell density and microscale organization

Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B. E., Bellance, S., Bareille, R., Rémy, M., Bordenave, L., Amédée, J., et al. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.055 · Cited by 836 · see citing works

Omnidirectional Printing of 3D Microvascular Networks

Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819 · see citing works

Application of inkjet printing to tissue engineering

Boland, T., Xu, T., Damon, B. J., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 784 · see citing works

Progress and Trends in Ink-jet Printing Technology

Le, H. P. (1998) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.1998.42.1.art00007 · Cited by 721 · see citing works

Inkjet printing for high-throughput cell patterning

Roth, E. A., Xu, T., Das, M., Gregory, C., Hickman, J. J., & Boland, T. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.052 · Cited by 715 · see citing works

Human microvasculature fabrication using thermal inkjet printing technology

Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 706 · see citing works

Bioprinting Toward Organ Fabrication: Challenges and Future Trends

Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666 · see citing works

Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels

Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642 · see citing works

Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering

Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 627 · see citing works

Bio-ink properties and printability for extrusion printing living cells

Chung, J. H.-Y., Naficy, S., Yue, Z., Kapsa, R. M. I., Quigley, A. F., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 612 · see citing works

Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology

Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 609 · see citing works

Biomolecular gradients in cell culture systems

Keenan, T. M., & Folch, A. (2008) · Lab Chip · doi:10.1039/b711887b · Cited by 596 · see citing works

Tissue engineering by self-assembly and bio-printing of living cells

Jakab, K., Norotte, C., Marga, F. S., Murphy, K., Vunjak‐Novakovic, G., & Forgács, G. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/022001 · Cited by 594 · see citing works

Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication.

Lee, W., Debasitis, J., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K. R., Park, J., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 576 · see citing works

Evaluation of hydrogels for bio‐printing applications

Murphy, S. V., Skardal, A., & Atala, A. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 547 · see citing works

Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells

Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., HORIE, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 539 · see citing works

Cell and organ printing 1: Protein and cell printers

Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A Discoveries in Molecular Cellular and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 532 · see citing works

Viability and electrophysiology of neural cell structures generated by the inkjet printing method

Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520 · see citing works

Effectiveness of haemodialysis access with an autologous tissue-engineered vascular graft: a multicentre cohort study

McAllister, T. N., Maruszewski, M., Garrido, S. A., Wystrychowski, W., Dusserre, N., Marini, A., Zagalski, K., Fiorillo, A., Avila, H., Manglano, X., et al. (2009) · The Lancet · doi:10.1016/s0140-6736(09)60248-8 · Cited by 511 · see citing works

A simplified method for production and growth of multicellular tumor spheroids.

Yuhas, J. M., Li, A. P., Martinez, A. O., & Ladman, A. J. (1977) · PubMed · Cited by 506 · see citing works

Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

Saunders, R., Gough, J. E., & Derby, B. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495 · see citing works

Creating perfused functional vascular channels using 3D bio-printing technology

Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494 · see citing works

Direct writing technology—Advances and developments

Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485 · see citing works

Laser Printing of Skin Cells and Human Stem Cells

Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma, N., et al. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2009.0397 · Cited by 479 · see citing works

High-throughput laser printing of cells and biomaterials for tissue engineering

Guillemot, F., Souquet, A., Catros, S., Guillotin, B., Lopez, J., Fauçon, M., Pippenger, B. E., Bareille, R., Rémy, M., Bellance, S., et al. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.029 · Cited by 476 · see citing works

Hydrogels for the Repair of Articular Cartilage Defects

Spiller, K. L., Maher, S. A., & Lowman, A. M. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2011.0077 · Cited by 472 · see citing works

Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates

Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 465 · see citing works

Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels

Tsang, V. L., Chen, A. A., Cho, L. M., Jadin, K. D., Sah, R. L., DeLong, S., West, J. L., & Bhatia, S. N. (2007) · The FASEB Journal · doi:10.1096/fj.06-7117com · Cited by 462 · see citing works

Cell encapsulation using biopolymer gels for regenerative medicine

Hunt, N. C., & Grover, L. M. (2010) · Biotechnology Letters · doi:10.1007/s10529-010-0221-0 · Cited by 437 · see citing works

Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns

Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 437 · see citing works

Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting

Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 425 · see citing works

Bioprinting for stem cell research

Taşoğlu, S., & Demirci, U. (2012) · Trends in biotechnology · doi:10.1016/j.tibtech.2012.10.005 · Cited by 423 · see citing works

Three-Dimensional Fiber Deposition of Cell-Laden, Viable, Patterned Constructs for Bone Tissue Printing

Fedorovich, N. E., de Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 415 · see citing works

Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography

Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1316 · Cited by 390 · see citing works

Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture

Lee, Y., Polio, S. R., Lee, W., Dai, G., Menon, L. G., Carroll, R. S., & Yoo, S. (2010) · Experimental Neurology · doi:10.1016/j.expneurol.2010.02.014 · Cited by 389 · see citing works

Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures

Jakab, K., Norotte, C., Damon, B. J., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A. M., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 384 · see citing works

Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels

Boland, T., Mironov, V. A., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A Discoveries in Molecular Cellular and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382 · see citing works

Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system

Shim, J., Lee, J., Kim, J. Y., & Cho, D. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 382 · see citing works

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos‐Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 381 · see citing works

Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs

Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1566 · Cited by 374 · see citing works

Biofabrication: a 21st century manufacturing paradigm

Mironov, V. A., Trusk, T. C., Kasyanov, V. A., Little, S., Swaja, R., & Markwald, R. R. (2009) · Biofabrication · doi:10.1088/1758-5082/1/2/022001 · Cited by 369 · see citing works

Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells

Cui, X., Dean, D. M. D., Ruggeri, Z. M., & Boland, T. (2010) · Biotechnology and Bioengineering · doi:10.1002/bit.22762 · Cited by 368 · see citing works

Microenvironments Engineered by Inkjet Bioprinting Spatially Direct Adult Stem Cells Toward Muscle- and Bone-Like Subpopulations

Phillippi, J. A., Miller, E. D., Weiss, L. E., Huard, J., Waggoner, A. S., & Campbell, P. G. (2007) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361 · see citing works

Direct Freeform Fabrication of Seeded Hydrogels in Arbitrary Geometries

Cohen, D. L., Malone, E., Lipson, H., & Bonassar, L. J. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1325 · Cited by 360 · see citing works

Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes

Xu, C., Chai, W., Huang, Y. H., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 358 · see citing works

Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System

Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353 · see citing works

Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration

Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351 · see citing works

Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds

Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351 · see citing works

Generation of Multi-scale Vascular Network System Within 3D Hydrogel Using 3D Bio-printing Technology

Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 343 · see citing works

Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures

Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 340 · see citing works

Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs

Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337 · see citing works

Fab@Home: the personal desktop fabricator kit

Malone, E., & Lipson, H. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776197 · Cited by 326 · see citing works

Review: Bioprinting: A Beginning

Mironov, V. A., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 320 · see citing works

Nanostructured polymer scaffolds for tissue engineering and regenerative medicine

Smith, I. O., Liu, X., Callahan, L. A. S., & Ma, P. X. (2009) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.26 · Cited by 313 · see citing works

Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets

Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keleş, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Hæggström, E., et al. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305 · see citing works

Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique

Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284 · see citing works

Biomimetic materials in tissue engineering

Patterson, J., Martino, M. M., & Hubbell, J. A. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70013-4 · Cited by 282 · see citing works

In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice

Kériquel, V., Guillemot, F., Arnault, I., Guillotin, B., Miraux, S., Amédée, J., Fricain, J., & Catros, S. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014101 · Cited by 281 · see citing works

Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting

Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 281 · see citing works

Laser-guided direct writing for applications in biotechnology

Odde, D. J., & Renn, M. J. (1999) · Trends in biotechnology · doi:10.1016/s0167-7799(99)01355-4 · Cited by 279 · see citing works

Laser-guided direct writing for three-dimensional tissue engineering.

Nahmias, Y., Schwartz, R., Verfaillie, C., & Odde, D. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20585 · Cited by 274 · see citing works

Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures

Jakab, K., Norotte, C., Damon, B. J., Marga, F. S., Neagu, A., Besch-Williford, C. L., Kachurin, A. M., Church, K. H., Park, H., Mironov, V. A., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273 · see citing works

Evaluation of Cell Viability and Functionality in Vessel-like Bioprintable Cell-Laden Tubular Channels

Yu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 268 · see citing works

Laser printing of cells into 3D scaffolds

Ovsianikov, A., Gruene, M., Pflaum, M., Koch, L., Maiorana, F., Wilhelmi, M. H., Haverich, A., & Chichkov, B. N. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014104 · Cited by 268 · see citing works

Characterization of printable cellular micro-fluidic channels for tissue engineering

Zhang, Y., Yu, Y., Chen, H., & Ozbolat, I. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/2/025004 · Cited by 246 · see citing works

Application of laser printing to mammalian cells

Barron, J. A., Ringeisen, B. R., Kim, H., Spargo, B. J., & Chrisey, D. B. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.161 · Cited by 242 · see citing works

Biopolymer deposition for freeform fabrication of hydrogel tissue constructs

Khalil, S., & Sun, W. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.05.023 · Cited by 238 · see citing works

Bioprinting is coming of age: report from the International Conference on Bioprinting and Biofabrication in Bordeaux (3B'09)

Guillemot, F., Mironov, V. A., & Nakamura, M. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/010201 · Cited by 225 · see citing works

Macromolecular monomers for the synthesis of hydrogel niches and their application in cell encapsulation and tissue engineering

Nuttelman, C. R., Rice, M. A., Rydholm, A. E., Salinas, C. N., Shah, D. N., & Anseth, K. S. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.09.006 · Cited by 225 · see citing works

Towards organ printing: engineering an intra-organ branched vascular tree

Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224 · see citing works

Drop-on-demand printing of cells and materials for designer tissue constructs

Boland, T., Xu, T., Damon, B. J., Manley, B., Kesari, P., Jalota, S., & Bhaduri, S. B. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.05.047 · Cited by 222 · see citing works

Tissue engineering with the aid of inkjet printers

Campbell, P. G., & Weiss, L. E. (2007) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.7.8.1123 · Cited by 221 · see citing works

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

Lorber, B., Hsiao, W., Hutchings, I. M., et al. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 208 · see citing works

Biofabrication and testing of a fully cellular nerve graft

Owens, C. M., Marga, F. S., Forgács, G., & Heesch, C. M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045007 · Cited by 205 · see citing works

Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model

Chang, R. C., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 204 · see citing works

Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications

Fedorovich, N. E., Swennen, I., Gironès, J., Moroni, L., van Blitterswijk, C., Schacht, E. H., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202 · see citing works

Recombinant Protein-co-PEG Networks as Cell-Adhesive and Proteolytically Degradable Hydrogel Matrixes. Part II: Biofunctional Characteristics

Rizzi, S. C., Ehrbar, M., Halstenberg, S., Raeber, G. P., Schmoekel, H. G., Hagenmüller, H., Müller, R., Weber, F. E., & Hubbell, J. A. (2006) · Biomacromolecules · doi:10.1021/bm060504a · Cited by 193 · see citing works

Development of ‘Multi-arm Bioprinter’ for hybrid biofabrication of tissue engineering constructs

Ozbolat, I. T., Chen, H., & Yu, Y. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2013.10.005 · Cited by 185 · see citing works

Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink

Xu, C., Zhang, M., Huang, Y. H., Ogale, A. A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184 · see citing works

Direct Bioprinting of Vessel-Like Tubular Microfluidic Channels

Zhang, Y., Yu, Y., & Ozbolat, I. T. (2013) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4024398 · Cited by 179 · see citing works

The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write

Wu, P., Ringeisen, B. R., Callahan, J. H., et al. (2001) · Thin Solid Films · doi:10.1016/s0040-6090(01)01347-5 · Cited by 175 · see citing works

A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering

Censi, R., Schuurman, W., Malda, J., di Dato, G., Bürgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., Martino, P. D., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 172 · see citing works

Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization

Campbell, P. G., Miller, E. D., Fisher, G. W., et al. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.032 · Cited by 165 · see citing works

Multicellular Self-Assembled Spheroidal Model of the Blood Brain Barrier

Urich, E., Patsch, C., Aigner, S., Graf, M. R., Iacone, R., & Freskgård, P. (2013) · Scientific Reports · doi:10.1038/srep01500 · Cited by 163 · see citing works

The integration of 3-D cell printing and mesoscopic fluorescence molecular tomography of vascular constructs within thick hydrogel scaffolds

Zhao, L., Lee, V. K., Yoo, S., Dai, G., & Intes, X. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.004 · Cited by 161 · see citing works

Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration

Xu, W., Wang, X., Yan, Y., Zheng, W. J., Xiong, Z., Lin, F., Wu, R., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507079451 · Cited by 155 · see citing works

Direct Construction of a Three-dimensional Structure with Cells and Hydrogel

Yan, Y., Wang, X., Xiong, Z., Liu, H., Liu, F., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911505053658 · Cited by 155 · see citing works

Laser-induced forward transfer of liquids: Study of the droplet ejection process

Colina, M., Duocastella, M., Fernández-Pradas, J. M., Serra, P., & Morenza, J. L. (2006) · Journal of Applied Physics · doi:10.1063/1.2191569 · Cited by 153 · see citing works

In vitroevaluation of carbon-nanotube-reinforced bioprintable vascular conduits

Dolati, F., Yu, Y., Zhang, Y., Jesús, A. M. D., Sander, E. A., & Ozbolat, I. T. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/14/145101 · Cited by 152 · see citing works

Protein Microdeposition Using a Conventional Ink-Jet Printer

Roda, A., Guardigli, M., Russo, C., et al. (2000) · BioTechniques · doi:10.2144/00283st07 · Cited by 148 · see citing works

Rapid prototyping as a tool for manufacturing bioartificial livers

Wang, X., Yan, Y., & Zhang, R. (2007) · Trends in biotechnology · doi:10.1016/j.tibtech.2007.08.010 · Cited by 146 · see citing works

Vitrification and levitation of a liquid droplet on liquid nitrogen

Song, Y. S., Adler, D. G., Xu, F., et al. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0914059107 · Cited by 144 · see citing works

Editorial: Tissue Engineering: Perspectives, Challenges, and Future Directions

Langer, R. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0219 · Cited by 140 · see citing works

High-Throughput Production of Single-Cell Microparticles Using an Inkjet Printing Technology

Xu, T., Kincaid, H. A., Atala, A., et al. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2903064 · Cited by 134 · see citing works

Micropatterning of living cells by laser-guided direct writing: application to fabrication of hepatic–endothelial sinusoid-like structures

Nahmias, Y., & Odde, D. J. (2006) · Nature Protocols · doi:10.1038/nprot.2006.386 · Cited by 130 · see citing works

Cell encapsulating droplet vitrification

Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b705809h · Cited by 117 · see citing works

Characterizing Environmental Factors that Impact the Viability of Tissue-Engineered Constructs Fabricated by a Direct-Write Bioassembly Tool

Smith, C. M., Christian, J. J., Warren, W. L., & Williams, S. K. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0101 · Cited by 116 · see citing works

Developmental biology and tissue engineering

Marga, F. S., Neagu, A., Kosztin, I., & Forgács, G. (2007) · Birth Defects Research Part C Embryo Today Reviews · doi:10.1002/bdrc.20109 · Cited by 113 · see citing works

Alginate gelation-induced cell death during laser-assisted cell printing

Gudapati, H., Yan, J., Huang, Y. H., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035022 · Cited by 110 · see citing works

A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds

Tirella, A., Orsini, A. A., Vozzi, G., & Ahluwalia, A. D. (2009) · Biofabrication · doi:10.1088/1758-5082/1/4/045002 · Cited by 104 · see citing works

Inkjet formation of unilamellar lipid vesicles for cell-like encapsulation

Stachowiak, J. C., Richmond, D., Li, T. H., Brochard‐Wyart, F., & Fletcher, D. A. (2009) · Lab on a Chip · doi:10.1039/b904984c · Cited by 103 · see citing works

The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells

Raof, N. A., Schiele, N. R., Xie, Y., Chrisey, D. B., & Corr, D. T. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.11.015 · Cited by 92 · see citing works

Printing technology to produce living tissue

Mironov, V. A. (2003) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.3.5.701 · Cited by 92 · see citing works

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

Cui, X., Gao, G., Yonezawa, T., & Dai, G. (2014) · Journal of Visualized Experiments · doi:10.3791/51294 · Cited by 87 · see citing works

Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic Method

Wang, W., Huang, Y. H., Grujicic, M., et al. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2896118 · Cited by 87 · see citing works

Laser direct writing of combinatorial libraries of idealized cellular constructs: Biomedical applications

Schiele, N. R., Koppes, R. A., Corr, D. T., et al. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.10.054 · Cited by 77 · see citing works

Gradient Hydrogel Construct Based on an Improved Cell Assembling System

Li, S., Yan, Y., Xiong, Z., Zhang, C. W. R., & Wang, X. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509103357 · Cited by 76 · see citing works

Laser direct write printing of sensitive and robust light emitting organic molecules

Kattamis, N. T., McDaniel, N. D., Bernhard, S., & Arnold, C. B. (2009) · Applied Physics Letters · doi:10.1063/1.3098375 · Cited by 72 · see citing works

A Three‐Dimensional Bioprinting System for Use With a Hydrogel‐Based Biomaterial and Printing Parameter Characterization

Song, S., Choi, J., Park, Y., Lee, J. J., Hong, S., & Sun, K. (2010) · Artificial Organs · doi:10.1111/j.1525-1594.2010.01143.x · Cited by 66 · see citing works

Modeling of Bubble Expansion-Induced Cell Mechanical Profile in Laser-Assisted Cell Direct Writing

Wang, W., Li, G., & Huang, Y. H. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000101 · Cited by 63 · see citing works

Bayesian computer-aided experimental design of heterogeneous scaffolds for tissue engineering

Weiss, L. E., Amon, C. H., Finger, S., Miller, E. D., Romero, D. A., Verdinelli, I., Walker, L. M., & Campbell, P. G. (2005) · Computer-Aided Design · doi:10.1016/j.cad.2005.02.004 · Cited by 61 · see citing works

Mesoscopic fluorescence molecular tomography of reporter genes in bioprinted thick tissue

Ozturk, M. S., Lee, V. K., Zhao, L., et al. (2013) · Journal of Biomedical Optics · doi:10.1117/1.jbo.18.10.100501 · Cited by 61 · see citing works

Drop-on-Demand Single Cell Isolation and Total RNA Analysis

Moon, S., Kim, Y., Dong, L., Lombardi, M. J., Hæggström, E., Jensen, R. V., Hsiao, L., & Demirci, U. (2011) · PLoS ONE · doi:10.1371/journal.pone.0017455 · Cited by 54 · see citing works

Growth Factor Array Fabrication Using a Color Ink Jet Printer

Watanabe, K., Miyazaki, T., & Matsuda, R. (2003) · ZOOLOGICAL SCIENCE · doi:10.2108/zsj.20.429 · Cited by 52 · see citing works

Freeform Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Tubular Constructs Using Inkjetting

Xu, C., Zhang, Z., Christensen, K., Huang, Y. H., Fu, J., & Markwald, R. R. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028578 · Cited by 48 · see citing works

Cell micropatterning on an albumin‐based substrate using an inkjet printing technique

Yamazoe, H., & Tanabe, T. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32312 · Cited by 45 · see citing works

PAM2 (Piston Assisted Microsyringe): A New Rapid Prototyping Technique for Biofabrication of Cell Incorporated Scaffolds

Tirella, A., Vozzi, F., Vozzi, G., et al. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0195 · Cited by 39 · see citing works

Scalable Biofabrication of Tissue Spheroids for Organ Printing

Rezende, R. A., Pereira, F. D. A. S., Kasyanov, V. A., Kemmoku, D. T., Maia, I. A., da Silva, J. V. L., & Mironov, V. A. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.054 · Cited by 37 · see citing works

Bioprinting: 3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs (Adv. Mater. 19/2014)

Kolesky, D. B., Truby, R. L., Gladman, A. S., et al. (2014) · Advanced Materials · doi:10.1002/adma.201470124 · Cited by 37 · see citing works

Additive/Subtractive Manufacturing Research and Development in Europe

Beaman, J. J., Atwood, C. L., Bergman, T. L., et al. (2004) · doi:10.21236/ada466756 · Cited by 36 · see citing works

Designer ‘blueprint’ for vascular trees: morphology evolution of vascular tissue constructs

Mironov, V. A., Zhang, J., Gentile, C., Brakke, K. A., Trusk, T. C., Jakab, K., Forgács, G., Kasyanov, V. A., Visconti, R. P., & Markwald, R. R. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750802657202 · Cited by 35 · see citing works

Measurement Science in the Circulatory System

Jones, C. M., Baker-Groberg, S. M., Cianchetti, F. A., et al. (2013) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-013-0317-4 · Cited by 31 · see citing works

Fabrication of 3D Cell Supporting Structures With Multi-Materials Using the Bio-Printer

Nishiyama, Y., Nakamura, M., Henmi, C., et al. (2007) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2007-31064 · Cited by 15 · see citing works

A multilevel numerical model quantifying cell deformation in encapsulated alginate structures

Nair, K., Yan, K., & Sun, W. (2007) · Journal of mechanics of materials and structures · doi:10.2140/jomms.2007.2.1121 · Cited by 14 · see citing works

Rapid Prototyping as an elegant Production Tool for Polymeric Tissue Engineering Scaffolds: a review

Desmet, T., Schacht, E. H., & Dubruel, P. (2008) · Ghent University Academic Bibliography (Ghent University) · Cited by 10 · see citing works

Manufacturing living things

Ozbolat, I. T., & Chen, H. (2013) · Cited by 9 · see citing works

Principles of Bioprinting Technology

Xu, T., Rodríguez-Dévora, J. I., Reyna-Soriano, D., Bhuyan, M., Zhu, L., Wang, K., & Yuan, Y. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-398523-1.00006-9 · Cited by 8 · see citing works

Design of electronics for a high-resolution, multi-material, and modular 3D printer

Kwan, J. G. (2013) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 6 · see citing works

Linkages of nuclear architecture to biological and pathological control of gene expression

Stein, G. S., van Wijnen, A. J., Stein, J. L., Lian, J. B., Pockwinse, S. M., & McNeil, S. M. (1998) · Journal of Cellular Biochemistry · doi:10.1002/(sici)1097-4644(1998)72:30/31+ · Cited by 6 · see citing works

Vertical and Horizontal Fabrication of Alginate-Based Vascular-Like Constructs Using Inkjetting

Xu, C., Huang, Y. H., & Markwald, R. R. (2012) · doi:10.26153/tsw/15352 · Cited by 5 · see citing works

Silk fibroin as a functional biomaterial for tissue engineering

Sun, W., Gregory, D. A., Tomeh, M. A., & Zhao, X. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031499 · Cited by 552 · see citing works

Bioprinting for vascular and vascularized tissue biofabrication

Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431 · see citing works

Bioprinting for cancer research

Knowlton, S., Onal, S., Yu, C. H., Zhao, J. J., & Tasoglu, S. (2015) · Trends in Biotechnology · doi:10.1016/j.tibtech.2015.06.007 · Cited by 361 · see citing works

Engineering Organoid Vascularization

Grebenyuk, S., & Ranga, A. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00039 · Cited by 295 · see citing works

Tumor-on-a-chip: from bioinspired design to biomedical application

Liu, X., Fang, J., Huang, S., Wu, X., Xie, X., Wang, J., Liu, F., Zhang, M., Peng, Z., & Hu, N. (2021) · Microsystems & Nanoengineering · doi:10.1038/s41378-021-00277-8 · Cited by 246 · see citing works

Bioprinting towards physiologically relevant tissue models for pharmaceutics

Peng, W., Unutmaz, D., & Ozbolat, I. T. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.05.013 · Cited by 196 · see citing works

Collagen bioinks for bioprinting: a systematic review of hydrogel properties, bioprinting parameters, protocols, and bioprinted structure characteristics

Stepanovska, J., Supova, M., Hanzalek, K., Broz, A., & Matejka, R. (2021) · Biomedicines · doi:10.3390/biomedicines9091137 · Cited by 112 · see citing works

Emerging Technologies in Organ Preservation, Tissue Engineering and Regenerative Medicine: A Blessing or Curse for Transplantation?

Messner, F., Guo, Y., Etra, J. W., & Brandacher, G. (2019) · Transplant International · doi:10.1111/tri.13432 · Cited by 29 · see citing works

3D bioprinting of tissue engineering scaffold for cell culture

Wu, L. J., Li, X., Guan, T., Chen, Y., & Qi, C. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2018-0264 · Cited by 9 · see citing works

Nanofibrous Scaffold Engineering Using Electrospinning

Murugan, R., Huang, Z. M., Yang, F., et al. (2007) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2007.18111 · Cited by 25 · see citing works

The Potential Matrix and Reinforcement Materials for the Preparation of the Scaffolds Reinforced by Fibers or Tubes for Tissue Repair

Wang, W., Mei, L., Wang, F., et al. (2017) · Springer eBooks · doi:10.1007/978-981-10-3554-8_2

[Strategies to choose scaffold materials for tissue engineering].

Gao, Q., Zhu, X., Xiang, J., et al. (2016) · PubMed · Cited by 6 · see citing works

Bioengineering of a scaffold-less three-dimensional tissue using net mould

Sakaguchi, K., Tobe, Y., Yang, J., Tanaka, R.-I., Yamanaka, K., Ono, J., & Shimizu, T. (2021) · Biofabrication · doi:10.1088/1758-5090/ac23e3 · Cited by 12 · see citing works