The DOI matches its Crossref record; 177 of the 177 references it cites were found in a registry or an index.
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Open accessAbstract
The dawn of 3D printing in medicine has given the field the hope of vitality in many patients fighting a multitude of diseases. Also entitled bioprinting, this appertains to its sequential printing of precursor ink, embodying cells and polymer/composite in a predetermined trajectory. The precursor ink, in addition to cells, is predominantly constituted of hydrogels due to its biodegradability and ability to mimic the body’s anatomy and mechanical features, e.g. bones, etc. This review paper is devoted to explicating the bioprinting (3D/4D) of alginate hydrogels, which are extracts from brown algae, through extrusion additive manufacturing. Alginates are salt derivatives of alginic acid and constitute long chains of polysaccharides, which provides pliability and gelling adeptness to their structure. Alginate hydrogel (employed for extrusion) can be pristine or composite relying on the requisite properties (target application controlled or in vivo environment), e.g. alginate-natural (gelatin/agarose/collagen/hyaluronic acid/etc) and alginate-synthetic (polyethylene glycol (PEG)/pluronic F-127/etc). Extrusion additive manufacturing of alginate is preponderate among others with its uncomplicated processing, material efficiency (cut down on wastage), and outspread adaptability for viscosities (0.03–6 * 10 4 Pa.s), but the procedure is limited by resolution (200 μ m) in addition to accuracy. However, 3D-fabricated biostructures display rigidness (unvarying with conditions) i.e. lacks a smart response, which is reassured by accounting time feature as a noteworthy accessory to printing, interpreted as 4D bioprinting. This review propounds the specific processing itinerary for alginate (meanwhile traversing across its composites/blends with natural and synthetic consideration) in extrusion along with its pre-/during/post-processing parameters intrinsic to the process. Furthermore, propensity is also presented in its (alginate extrusion processing) application for tissue engineering, i.e. bones, cartilage (joints), brain (neural), ear, heart (cardiac), eyes (corneal), etc, due to a worldwide quandary over accessibility to natural organs for diverse types of diseases. Additionally, the review contemplates recently invented advance printing, i.e. 4D printing for biotic species, with its challenges and future opportunities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Burden of liver diseases in the world
Asrani, S. K., Devarbhavi, H., Eaton, J., & Kamath, P. S. (2019) · Journal of Hepatology · doi:10.1016/j.jhep.2018.09.014 · Cited by 3,783
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
A practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Injectable and biodegradable hydrogels: gelation, biodegradation and biomedical applications
Li, Y., Rodrigues, J., & Tomás, H. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15203c · Cited by 1,445
Scaffolds for bone tissue engineering: state of the art and new perspectives
Roseti, L., Parisi, V., Petretta, M., Cavallo, C., Desando, G., Bartolotti, I., & Grigolo, B. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.017 · Cited by 1,320
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Applications of Alginate-Based Bioinks in 3D Bioprinting
Axpe, E., & Oyen, M. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms17121976 · Cited by 663
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Alginate gel particles–A review of production techniques and physical properties
Ching, S. H., Bansal, N., & Bhandari, B. (2017) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2014.965773 · Cited by 651
Biofabrication: A Guide to Technology and Terminology
Moroni, L., Boland, T., Burdick, J. A., De Maria, C., Derby, B., Forgacs, G., Groll, J., Li, Q., Malda, J., Mironov, V. A., et al. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2017.10.015 · Cited by 636
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Alginate: Current Use and Future Perspectives in Pharmaceutical and Biomedical Applications
Szekalska, M., Puciłowska, A., Szymańska, E., Ciosek, P., & Winnicka, K. (2016) · International Journal of Polymer Science · doi:10.1155/2016/7697031 · Cited by 590
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Advancements in nanofibers for wound dressing: A review
Ambekar, R. S., & Kandasubramanian, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.020 · Cited by 447
Self-citationHsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
3D bioprinting of a corneal stroma equivalent
Isaacson, A., Swioklo, S., & Connon, C. J. (2018) · Experimental Eye Research · doi:10.1016/j.exer.2018.05.010 · Cited by 419
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Oxidized Alginate-Based Hydrogels for Tissue Engineering Applications: A Review
Reakasame, S., & Boccaccini, A. R. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01331 · Cited by 408
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
Giuseppe, M. D., Law, N., Webb, B., A. Macrae, R., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 394
Three-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Shim, J.-H., Lee, J.-S., Kim, J. Y., & Cho, D.-W. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/8/085014 · Cited by 379
Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells
Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 376
A bioprintable form of chitosan hydrogel for bone tissue engineering
Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 376
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Microcapsules of alginate-chitosan – I
Gåserød, O., Smidsrød, O., & Skjåk-Bræk, G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00073-8 · Cited by 362
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing
Kirchmajer, D. M., Gorkin III, R., & in het Panhuis, M. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 337
Bioprinting and its applications in tissue engineering and regenerative medicine
Aljohani, W., Ullah, M. W., Zhang, X., & Yang, G. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.171 · Cited by 335
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Bendtsen, S. T., Quinnell, S. P., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36036 · Cited by 329
Skin Tissue Engineering for Tissue Repair and Regeneration
Priya, S. G., Jungvid, H., & Kumar, A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0318 · Cited by 315
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Biomatrices and biomaterials for future developments of bioprinting and biofabrication
Nakamura, M., Iwanaga, S., Henmi, C., Arai, K., & Nishiyama, Y. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014110 · Cited by 311
KLEBE, R. (1988) · Experimental Cell Research · doi:10.1016/0014-4827(88)90275-3 · Cited by 310
3D bioprinted glioma stem cells for brain tumor model and applications of drug susceptibility
Dai, X., Ma, C., Lan, Q., & Xu, T. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045005 · Cited by 301
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00196 · Cited by 293
Versatile click alginate hydrogels crosslinked via tetrazine–norbornene chemistry
Desai, R. M., Koshy, S. T., Hilderbrand, S. A., Mooney, D. J., & Joshi, N. S. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.01.048 · Cited by 290
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix
Yu, C., Ma, X., Zhu, W., Wang, P., Miller, K. L., Stupin, J., Koroleva-Maharajh, A., Hairabedian, A., & Chen, S. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.009 · Cited by 272
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 267
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Self-citationClickable PEG hydrogel microspheres as building blocks for 3D bioprinting
Xin, S., Chimene, D., Garza, J. E., Gaharwar, A. K., & Alge, D. L. (2019) · Biomaterials Science · doi:10.1039/c8bm01286e · Cited by 263
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
3D Bioprinting of Highly Thixotropic Alginate/Methylcellulose Hydrogel with Strong Interface Bonding
Li, H., Tan, Y. J., Leong, K. F., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04216 · Cited by 250
3D Printing of Lotus Root‐Like Biomimetic Materials for Cell Delivery and Tissue Regeneration
Feng, C., Zhang, W., Deng, C., Li, G., Chang, J., Zhang, Z., Jiang, X., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201700401 · Cited by 246
Schütz, K., Placht, A.-M., Paul, B., Brüggemeier, S., Gelinsky, M., & Lode, A. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2058 · Cited by 236
Zhang, X., Yang, P., Dai, Y., Ma, P., Li, X., Cheng, Z., Hou, Z., Kang, X., Li, C., & Lin, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300136 · Cited by 228
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
3D Spatiotemporal Mechanical Microenvironment: A Hydrogel‐Based Platform for Guiding Stem Cell Fate
Ma, Y., Lin, M., Huang, G., Li, Y., Wang, S., Bai, G., Lu, T. J., & Xu, F. (2018) · Advanced Materials · doi:10.1002/adma.201705911 · Cited by 228
Biofabrication: an overview of the approaches used for printing of living cells
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & in het Panhuis, M. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-4853-6 · Cited by 227
In vitro study of directly bioprinted perfusable vasculature conduits
Zhang, Y., Yu, Y., Akkouch, A., Dababneh, A., Dolati, F., & Ozbolat, I. T. (2015) · Biomaterials Science · doi:10.1039/c4bm00234b · Cited by 226
3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
Progress in the Advancement of Porous Biopolymer Scaffold: Tissue Engineering Application
Ambekar, R. S., & Kandasubramanian, B. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05334 · Cited by 205
Self-citationThiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
Athirasala, A., Tahayeri, A., Thrivikraman, G., França, C. M., Monteiro, N., Tran, V., Ferracane, J., & Bertassoni, L. E. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9b4e · Cited by 189
Luo, Y., Wu, C., Lode, A., & Gelinsky, M. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015005 · Cited by 182
Hendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
Luo, Y., Li, Y., Qin, X., & Wa, Q. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.002 · Cited by 171
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Shanjani, Y., Pan, C. C., Elomaa, L., & Yang, Y. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045008 · Cited by 169
Janbaz, S., Hedayati, R., & ZADPOOR, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00195e · Cited by 167
Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior
Li, Z., Huang, S., Liu, Y., Yao, B., Hu, T., Shi, H., Xie, J., & Fu, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26407-3 · Cited by 164
Evaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
Ning, L., Sun, H., Lelong, T., Guilloteau, R., Zhu, N., Schreyer, D. J., & Chen, D. (2018) · Biofabrication · doi:10.1088/1758-5090/aacd30 · Cited by 163
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Alessandri, K., Feyeux, M., Gurchenkov, B., Delgado, C., Trushko, A., Krause, K.-H., Vignjević, D., Nassoy, P., & Roux, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00133e · Cited by 160
4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
Guo, J., Zhang, R., Zhang, L., & Cao, X. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00957 · Cited by 159
Lee, H. J., Kim, Y. B., Ahn, S. H., Lee, J., Jang, C. H., Yoon, H., Chun, W., & Kim, G. H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500193 · Cited by 158
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Ma, Y., Ji, Y., Zhong, T., Wan, W., Yang, Q., Li, A., Zhang, X., & Lin, M. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00601 · Cited by 158
Abelseth, E., Abelseth, L., la Vega, L. D., Beyer, S., Wadsworth, S. J., & Willerth, S. M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01235 · Cited by 157
Hiller, T., Berg, J., Elomaa, L., Röhrs, V., Ullah, I., Schaar, K., Dietrich, A.-C., Al‐Zeer, M. A., Kurtz, A., Hocke, A. C., et al. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19103129 · Cited by 152
Caudill, C. L., Perry, J. L., Tian, S., Luft, J. C., & DeSimone, J. M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.05.042 · Cited by 151
Tyrosinase-doped bioink for 3D bioprinting of living skin constructs
Shi, Y., Xing, T., Zhang, H., Yin, R., Yang, S., Wei, J., & Zhang, W. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa5b6 · Cited by 149
Flexible Polymeric Substrates for Electronic Applications
Malik, A., & Kandasubramanian, B. (2018) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2018.1473424 · Cited by 148
Self-citation4D Bioprinting: Technological Advances in Biofabrication
Yang, G. H., Yeo, M., Koo, Y. W., & Kim, G. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800441 · Cited by 145
Ma, Y., Ji, Y., Huang, G., Ling, K., Zhang, X., & Xu, F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044105 · Cited by 139
4D printing shape memory polymers for dynamic jewellery and fashionwear
Zarek, M., Layani, M., Eliazar, S., Mansour, N., Cooperstein, I., Shukrun, E., Szlar, A., Cohn, D., & Magdassi, S. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1244085 · Cited by 138
Kim, G., Ahn, S., Kim, Y.-Y., Cho, Y., & Chun, W. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03452e · Cited by 137
Laser-assisted printing of alginate long tubes and annular constructs
Yan, J., Huang, Y. H., & Chrisey, D. B. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015002 · Cited by 130
Nanocomposite hydrogels for cartilage tissue engineering: a review
Asadi, N., Alizadeh, E., Salehi, R., Khalandi, B., Davaran, S., & Akbarzadeh, A. (2017) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2017.1345924 · Cited by 129
BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting
Huang, J., Fu, H., Wang, Z., Meng, Q., Liu, S., Wang, H., Zheng, X., Dai, J., & Zhang, Z. (2016) · RSC Advances · doi:10.1039/c6ra24231f · Cited by 128
Ito, I., Imada, M., Ikeda, M., Sueno, K., Arikuni, T., & Kida, A. (2001) · The Laryngoscope · doi:10.1097/00005537-200105000-00023 · Cited by 124
Kosik‐Kozioł, A., Costantini, M., Bolek, T., Szöke, K., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90d7 · Cited by 122
Hua, D., Zhang, X., Ji, Z., Yan, C., Yu, B., Li, Y., Wang, X., & Zhou, F. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc05710e · Cited by 122
Tumor Microenvironment in the Brain
Lorger, M. (2012) · Cancers · doi:10.3390/cancers4010218 · Cited by 120
Generation of Multilayered 3D Structures of HepG2 Cells Using a Bio-printing Technique
Jeon, H., Kang, K., Park, S. A., Kim, W. D., Paik, S. S., Lee, S., Jeong, J., & Choi, D. (2016) · Gut and Liver · doi:10.5009/gnl16010 · Cited by 119
Ahn, S., Lee, H., Bonassar, L. J., & Kim, G. (2012) · Biomacromolecules · doi:10.1021/bm3011352 · Cited by 112
Akkineni, A. R., Ahlfeld, T., Lode, A., & Gelinsky, M. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045001 · Cited by 112
Fused deposition processing polycaprolactone of composites for biomedical applications
Prasad, A. S., & Kandasubramanian, B. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2018.1563117 · Cited by 110
Self-citationHydrodynamically Guided Hierarchical Self‐Assembly of Peptide–Protein Bioinks
Hedegaard, C. L., Collin, E. C., Redondo‐Gómez, C., Nguyen, L. T. H., Ng, K. W., Castrejón-Pita, A. A., Castrejón-Pita, J. R., & Mata, Á. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201703716 · Cited by 107
Addressing Unmet Clinical Needs with 3D Printing Technologies
Ghosh, U., Ning, S., Wang, Y., & Kong, Y. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800417 · Cited by 107
Park, J., Lee, S. J., Lee, H., Park, S. A., & Lee, J. Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.05.048 · Cited by 105
Haring, A. P., Thompson, E. G., Tong, Y., Laheri, S., Cesewski, E., Sontheimer, H. W., & Johnson, B. N. (2019) · Biofabrication · doi:10.1088/1758-5090/ab02c9 · Cited by 105
Cabello, S. D. P., Mollá, S., Ochoa, N. A., Marchese, J. A., Giménez, E., & Compañ, V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.093 · Cited by 101
Valentin, T. M., Leggett, S. E., Chen, P., Sodhi, J., Stephens, L. H., McClintock, H. D., Sim, J. Y., & Wong, I. Y. (2017) · Lab on a Chip · doi:10.1039/c7lc00694b · Cited by 98
Novel conductive polypyrrole/silk fibroin scaffold for neural tissue repair
Yang, Y., Wang, H., Zhao, Y., Niu, C., Shi, J.-Q., & Wang, Y. (2018) · Neural Regeneration Research · doi:10.4103/1673-5374.235303 · Cited by 96
3D and 4D Bioprinting of the Myocardium: Current Approaches, Challenges, and Future Prospects
Ong, C. S., Nam, L. L., Ong, K., Krishnan, A., Huang, C., Fukunishi, T., & Hibino, N. (2018) · BioMed Research International · doi:10.1155/2018/6497242 · Cited by 92
Nanomaterials for Craniofacial and Dental Tissue Engineering
Li, G., Zhou, T., Lin, S., Shi, S., & Lin, Y. (2017) · Journal of Dental Research · doi:10.1177/0022034517706678 · Cited by 91
Green bioprinting: extrusion-based fabrication of plant cell-laden biopolymer hydrogel scaffolds
Seidel, J., Ahlfeld, T., Adolph, M., Kümmritz, S., Steingroewer, J., Krujatz, F., Bley, T., Gelinsky, M., & Lode, A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8854 · Cited by 90
Cataldo, S., Gianguzza, A., Pettignano, A., & Villaescusa, I. (2012) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2012.10.005 · Cited by 89
High-speed on-demand 3D printed bioresorbable vascular scaffolds
Ware, H. O. T., Farsheed, A. C., Akar, B., Duan, C., Chen, X., Ameer, G. A., & Sun, C. (2017) · Materials Today Chemistry · doi:10.1016/j.mtchem.2017.10.002 · Cited by 89
Fundamentals and Effects of Biomimicking Stimuli-Responsive Polymers for Engineering Functions
Korde, J. M., & Kandasubramanian, B. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b00683 · Cited by 88
Self-citationKang, L. H., Armstrong, P. A., Lee, L. J., Duan, B., Kang, K. H., & Butcher, J. T. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1619-1 · Cited by 87
Sakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
3D printing of an interpenetrating network hydrogel material with tunable viscoelastic properties
Bootsma, K., Fitzgerald, M. M., Free, B., Dimbath, E. D., Conjerti, J., Reese, G. J., Konkolewicz, D., Berberich, J. A., & Sparks, J. L. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.07.020 · Cited by 79
Human corneal cell culture models for drug toxicity studies
Rönkkö, S., Vellonen, K., Järvinen, K., Toropainen, E., & Urtti, A. O. (2016) · Drug Delivery and Translational Research · doi:10.1007/s13346-016-0330-y · Cited by 79
Nature-inspired smart solar concentrators by 4D printing
Momeni, F., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.01.062 · Cited by 79
Apelgren, P., Karabulut, E., Amoroso, M., Mantas, A., Ávila, H. M., Kölby, L., Kondo, T., Toríz, G., & Gatenholm, P. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00157 · Cited by 77
Three-Dimensional Bioprinting of Hepatic Structures with Directly Converted Hepatocyte-Like Cells
Kang, K., Kim, Y., Jeon, H., Lee, S. B., Kim, J. S., Park, S. A., Kim, W. D., Yang, H. M., Kim, S. J., Jeong, J., et al. (2017) · Tissue Engineering Part A · doi:10.1089/ten.tea.2017.0161 · Cited by 76
Wang, L., Xu, M., Luo, L., Zhou, Y., & Si, P. (2018) · Scientific Reports · doi:10.1038/s41598-018-21274-4 · Cited by 75
Three-dimensional (3D) printing of mouse primary hepatocytes to generate 3D hepatic structure
Kim, Y., Kang, K., Jeong, J., Paik, S. S., Kim, J. S., Park, S. A., Kim, W. D., Park, J., & Choi, D. (2017) · Annals of Surgical Treatment and Research · doi:10.4174/astr.2017.92.2.67 · Cited by 73
Datta, S., Sarkar, R., Vyas, V., Bhutoria, S., Barui, A., Chowdhury, A. R., & Datta, P. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.202 · Cited by 73
Fluid and cell behaviors along a 3D printed alginate/gelatin/fibrin channel
Xu, Y., & Wang, X. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25579 · Cited by 70
The applicability of furfuryl‐gelatin as a novel bioink for tissue engineering applications
Kumar, S. A., Allen, S. C., Tasnim, N., Akter, T., Park, S., Kumar, A., Chattopadhyay, M., Ito, Y., Suggs, L. J., & Joddar, B. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34123 · Cited by 68
Li, Y., Jiang, X., Li, L., Chen, Z., Gao, G., Yao, R., & Sun, W. (2018) · Biofabrication · doi:10.1088/1758-5090/aacfc3 · Cited by 66
Single-step laser-based fabrication and patterning of cell-encapsulated alginate microbeads
Kingsley, D. M., Dias, A. D., Chrisey, D. B., & Corr, D. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045006 · Cited by 65
Shi, L., Xiong, L., Hu, Y., Li, W., Chen, Z., Liu, K., & Zhang, X. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24779 · Cited by 61
Diogo, G. S., Gaspar, V. M., Serra, I. R., Fradique, R., & Correia, I. J. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025001 · Cited by 60
Current advances in three-dimensional tissue/organ printing
Park, J. H., Jang, J., Lee, J.-S., & Cho, D.-W. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-8111-8 · Cited by 51
Effects of tunable, 3D-bioprinted hydrogels on human brown adipocyte behavior and metabolic function
Kuss, M. A., Kim, J., Qi, D., Wu, S., Lei, Y., Chung, S., & Duan, B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.021 · Cited by 50
Manhas, N., Kandasubramanian, B., Prajith, P., Rule, P., & Nimje, S. V. (2015) · RSC Advances · doi:10.1039/c4ra17191h · Cited by 49
Self-citationIzadifar, M., Babyn, P., Kelly, M., Chapman, D., & Chen, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2017.0222 · Cited by 48
Deoray, N., & Kandasubramanian, B. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1354226 · Cited by 46
Self-citationReview on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre
Yadav, R., Naebe, M., Wang, X., & Kandasubramanian, B. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b01679 · Cited by 45
Self-citationKoo, Y., & Kim, G. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025010 · Cited by 44
Bionic Prototyping of Honeycomb Patterned Polymer Composite and Its Engineering Application
Korde, J. M., Shaikh, M., & Kandasubramanian, B. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2018.1434667 · Cited by 42
Self-citationLi, X., Wang, X., Wang, X., Chen, H., Zhang, X., Zhou, L., & Xu, T. (2018) · 3 Biotech · doi:10.1007/s13205-018-1341-9 · Cited by 41
Lin, H., Ling, M., & Lin, Y. (2009) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856209x426448 · Cited by 39
Bandyopadhyay, A., Dewangan, V. K., Vajanthri, K. Y., Poddar, S., & Mahto, S. K. (2017) · Journal of Applied Biomedicine · doi:10.1016/j.bbe.2017.12.001 · Cited by 36
Yeo, M., Ha, J., Lee, H., & Kim, G. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.04.017 · Cited by 35
Formulation and Characterization of a SIS-Based Photocrosslinkable Bioink
Serna, J. A., Florez, S. L., Nio, V. A. T., Briceño, J. C., Muñoz-Camargo, C., & Cruz, J. C. (2019) · Polymers · doi:10.3390/polym11030569 · Cited by 34
In Situ Printing-then-Mixing for Biological Structure Fabrication Using Intersecting Jets
Christensen, K., Compaan, A. M., Chai, W., Xia, G., & Huang, Y. H. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00752 · Cited by 33
Recent advances on 3D printing in hard and soft tissue engineering
Janmohammadi, M., & Nourbakhsh, M. S. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1581196 · Cited by 33
In vitro evaluation of 3D bioprinted tri‐polymer network scaffolds for bone tissue regeneration
Bendtsen, S. T., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36184 · Cited by 32
Recent Advances in Additive Manufacturing of Bio-inspired Materials
Gharde, S., Surendren, A., Korde, J. M., Saini, S., Deoray, N., Goud, R., Nimje, S. V., & Kandasubramanian, B. (2019) · Springer eBooks · doi:10.1007/978-3-030-13951-3_2 · Cited by 32
Self-citationMishra, N., & Kandasubramanian, B. (2017) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1326139 · Cited by 26
Self-citationAlgae-Based Polyurethane Blends and Composites
Zia, F., Barikani, M., Jabeen, F., Zuber, M., Zia, K. M., Khosa, M. K., & Khatri, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-812360-7.00011-2 · Cited by 25
3D-printed air-blast microfluidic nozzles for preparing calcium alginate microparticles
Ye, B., Xu, H., Bao, B., et al. (2017) · RSC Advances · doi:10.1039/c7ra08611c · Cited by 22
Fabrication Speed Optimization for High-resolution 3D-printing of Bioresorbable Vascular Scaffolds
Ware, H. O. T., Farsheed, A. C., Baker, E., Ameer, G. A., & Sun, C. (2017) · Procedia CIRP · doi:10.1016/j.procir.2017.04.038 · Cited by 20
Dreher, R. D., & Starly, B. (2015) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4031173 · Cited by 11
Research works printed but not linked: 10
- Sandeep, 2017, Comparison and analysis of different 3d printing techniques, Int. J. Latest Trends Eng. Technol., 8, 264, 10.21172/1.841.44 · doi:10.21172/1.841.44
- Yadav, 2018, Biomimicking of hierarchal molluscan shell structure via layer by layer 3D printing, Ind. Eng. Chem. Res., 57, 10832, 10.1021/acs.iecr.8b01738 · DOI
- Christensen, 2017, Deformation compensation during buoyancy-enabled inkjet printing of three-dimensional soft tubular structures, J. Manuf. Sci. Eng., 140, 10.1115/1.4037996 · doi:10.1115/1.4037996
- Xiong, 2015, Identification of optimal printing conditions for laser printing of alginate tubular constructs, J. Manuf. Process., 20, 450, 10.1016/j.jmapro.2015.06.023 · doi:10.1016/j.jmapro.2015.06.023
- Aoun, 2015, Futuristic three-dimensional printing and personalized neurosurgery, World Neurosurg., 84, 870, 10.1016/j.wneu.2015.08.010 · doi:10.1016/j.wneu.2015.08.010
- Hudlikar, 2014, Towards the enhancement of antimicrobial efficacy and hydrophobization of chitosan, J. Chitin Chitosan Sci., 2, 273, 10.1166/jcc.2014.1080 · doi:10.1166/jcc.2014.1080
- Roushangar Zineh, 2018, Mechanical and biological performance of printed alginate/methylcellulose/halloysite nanotube/polyvinylidene fluoride bio-scaffolds, Mater. Sci. Eng. C, 92, 779, 10.1016/j.msec.2018.07.035 · doi:10.1016/j.msec.2018.07.035
- Suhail, 2015, Fabrication of bioactive nano assimilated polymeric scaffold for the metamorphosis of organs or tissues: triumph, confrontation and prospective, J. Bionanoscience, 9, 167, 10.1166/jbns.2015.1295 · doi:10.1166/jbns.2015.1295
- Olubamiji, 2017, Traditional invasive and synchrotron-based noninvasive assessments of three-dimensional-printed hybrid cartilage constructs in situ, Tissue Eng. Part C Methods, 23, 156, 10.1089/ten.tec.2016.0368 · doi:10.1089/ten.tec.2016.0368
- Newman, 2018, What does the liver do?, MedialNewsToday
Cited by
Structures, Properties and Applications of Alginates
Abka-khajouei, R., Tounsi, L., Shahabi, N., Patel, A. K., Abdelkafi, S., & Michaud, P. (2022) · Marine Drugs · doi:10.3390/md20060364 · Cited by 769
Alginate and alginate composites for biomedical applications
Ahmad Raus, R., Wan Nawawi, W. M. F., & Nasaruddin, R. R. (2021) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2020.10.001 · Cited by 627
Zhang, K., Feng, Q., Fang, Z., Gu, L., & Bian, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00071 · Cited by 394
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Development of alginate-based hydrogels: Crosslinking strategies and biomedical applications
Tan, J., Luo, Y., Guo, Y., Zhou, Y., Liao, X., Li, D., Lai, X., & Liu, Y. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124275 · Cited by 308
Metadata
- Authors
- Rastogi, P., & Kandasubramanian, B.
- Venue
- Biofabrication
- Publisher
- IOP Publishing
- Published
- 2019-09-10
- Volume
- 11
- Issue
- 4
- Pages
- 042001
- ISSN
- 1758-5082 (ISSN-L)
- 1758-5090
- OpenAlex
- W2958832813
- Cited by
- 564
- References
- 177
- FWCI
- 20.57
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- publishingsupport.iopscience.iop.org/iop-standard/v1 (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.